Attachment 5 - Drawing Part 2 676-325 Renovate B404 - Architectural_Part1.pdf
PDF 10 MB Posted
- Attached to
- Y1DA--Minor Construction - Tomah VAMC 676-325 Expand and Renovate B404 for Outpatient Mental Health
- Solicitation number
- 36C77623B0050_1
About this file
This document provides details on a federal contract opportunity for architectural design services. The solicitation is for minor construction services to expand and renovate an outpatient mental health facility at the Tomah Veterans Affairs Medical Center in Tomah, Wisconsin. Specifically, the project involves renovating room B404 to better accommodate outpatient mental health needs. The contracting agency is the Department of Veterans Affairs Technology Acquisition Center located in Austin, Texas. Interested parties should reference solicitation number 36C77623B0050_1 in any responses, which are due on the date specified in the full solicitation. The award is expected to be a firm-fixed-price contract for architectural design and construction oversight services.
View the file
Other files
Show all 41
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JT
J T
UP
B ri ck
W a ll
949.91 949.77
.7
. 0
951.04
.8
.6
.1
.8
951.62
951.69
FFE=
952.10
FFE=
953.34
FFE=
951.93
GFE=
951.55
Planters
Planters
Wood Fence
Wood Fence
Vinyl Fence
C h a in
L in k F e n c e
47.2
.0
50.01 .8
117.8
46.1
.3
.8
46.2
.1
127.4
950.83
TNH=
952.89
G STREET
(A Public R/W)
G
R
UP
N
N
N
Range
BUILDING NO. 405
BUILDING NO. 404
NEW ENTRY WALK AND
LANDSCAPING
EXISTING TRANSFORMERS NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
DESIGN
GROUP
Project Number:
Building:
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
ARCHITECTURAL SITE PLAN
AS-100
13 250
-3
A S
-1
/2
/2
.p d f
SCALE:1" = 15'-0"AS-100
1 ARCHITECTURAL SITE PLAN N
13 of 2332/15/2023 13 of 233
A
B
C
D
E
F
H
E.8
C.3
G
1 94 5 876321A 1910 151411 12 13 16 17 187.66.4
A.8
B.9 D8
5.2 11a
A.A
D9 D9 D9
D9
D9
D9
D9
A.9
D
C.6
D1
D1
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT NOTED ON THE DEMOLITION
PLANS.
5. THE OWNER HAS FIRST RIGHT OF REFUSAL OF ALL SALVAGE ITEMS. THE CONTRACTOR SHALL PROPERLY DISPOSE OF
ALL CONSTRUCTION DEBRIS. DO NOT STOCKPILE DEBRIS ON SITE.
6. ITEMS TO BE DEMOLISHED SHALL BE REMOVED COMPLETELY INCLUDING ALL ANCHORS, HANGERS, FASTENERS, PIPES, CONDUCTS, DUCTS, ETC. UNLESS OTHERWISE INDICATED TO BE ABANDONED IN PLACE.
7. CONC. SLAB PATCHES MUST BE FLUSH WITH REMAINING SURFACES TO PERMIT APPLICATION OF FINISHES. PROVIDE
WELDED WIRE MESH IN PATCH AREAS LARGER THAT (4) FOUR SQUARE FEET.
8. CONC. SLABS TO REMAIN SHALL BE PATCHED, SCRAPED, LEVELED, AND CLEANED TO PROVIDE SURFACE SUITABLE FOR NEW FINISHES. WHERE RENOVATED AREAS ARE RECEIVING NEW UNDERGROUND MECHANICAL, PLUMBING, ELECTRICAL, OR ADDITIONAL FOUNDATION WORK, SEE MECHANICAL, PLUMBING, ELECTRIC, AND STRUCTURAL DRAWINGS, AS WELL AS ARCHITECTURAL DRAWINGS TO DETERMINE EXTENT OF REQUIRED CUT AND PATCH OF EXISTING SLAB. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONC. SLAB DEMOLITION AND REPLACEMENT NECESSARY TO INSTALL THE NEW WORK. BACKFILL ALL BELOW GRADE DEMOLITION WORK WITH SUITABLE FILL
MEETING STRUCTURAL REQUIREMENTS FOR NEW WORK.
9. PARTITIONS SHOWN TO BE REMOVED SHALL BE CONFIRMED BY THE CONTRACTOR AS TO TYPE OF PARTITION AND EXACT LOCATION. COMPLETELY REMOVE PARTITIONS FROM FLOOR TO STRUCTURE ABOVE INCLUDING BASE, ALL FASTENERS, GROUTS, SEAL ANTS, ETC., UNLESS NOTED OTHERWISE. MASONRY PARTITIONS WHICH EXTEND THROUGH THE SLAB SHALL BE REMOVED TO 8" BELOW FINISH FLOOR. FILL SLAB OPENING WITH CONCRETE FILL TO RECEIVE FINISH FLOOR. WHERE WALLS SCHEDULED TO BE REMOVED SIT ON SLABS, GRIND SLAB TO RECEIVE FINISH FLOOR.
10. REMOVE, PATCH AND REPAIR PORTIONS OF WALL PARTITIONS WHICH CONFLICT WITH NEW WORK TO BE INSTALLED, EVEN IF NOT SPECIFICALLY NOTED TO BE DEMOLISHED ON PLANS.
11. WALLS TO BE REMOVED FROM INTERSECTING WALLS SHALL INCLUDE TOOTHED IN REPLACEMENT OF DAMAGED MASONRY ON WALL TO REMAIN AND REMOVAL OF TIES PROJECTING FROM WALLS. SEE DETAILS FOR ADDITIONAL
CONDITIONS.
12. WALLS TO BE PARTIALLY REMOVED SHALL BE TERMINATED WITH FINISHED MASONRY ENDS BY TOOTHING IN NEW MASONRY UNITS, TO MATCH ADJACENT MASONRY. SEE DETAILS FOR OTHER CONDITIONS. NO WALLS SHALL BE
TERMINATED WITH EXPOSED OPEN CELLS OR DAMAGED MASONRY UNITS.
13. WHERE NEW OPENINGS ARE SHOWN IN EXISTING WALLS, CAREFULLY REMOVE MASONRY TO NEAREST JOINT LINE WITHOUT DISTURBING ADJACENT WORK SO THAT NEW WORK CAN BE PATCHED IN TO MATCH. ALL NEW MASONRY
WORK SHALL BE TOOTHED IN.
14. ALL EXISTING STRUCTURE SHALL REMAIN, UNLESS NOTED OTHERWISE.
15. COORDINATE DEMOLITION OF ALL STRUCTURAL ITEMS (COLUMNS, BEAMS, SLABS, ET, ETC.) WITH STRUCTURAL DWGS.
EXTENT OF DEMOLITION AREA SHALL BE IN ACCORDANCE WITH STRUCTURAL REQUIREMENTS AND COORDINATED WITH
ALL NEW WORK.
16. TEMPORARILY SUPPORT ALL BEAMS, LINTELS, PORTIONS OF WALLS ETC., TO BE DISTURBED BY DEMOLITION WORK, UNTIL THEY ARE RE-SUPPORTED BY NEW WORK.
17. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE INTEGRITY OF EXISTING BUILDING ELEMENTS TO REMAIN THROUGHOUT SEQUENCE OF WORK. ANY DAMAGE TO EXISTING BUILDING CONDITIONS SHOWN TO REMAIN SHALL BE
RESTORED TO NEW WORK CONDITION AT NO ADDITIONAL COST TO THE OWNER.
18. WINDOWS SCHEDULED FOR REMOVAL SHALL BE REMOVED COMPLETELY. FASTENERS MAY BE CUT FLUSH WITH HEAD, JAMBS, AND SILLS IF THE NEW WINDOW UNIT WILL CONCEAL FASTENER. PROTECT EXISTING SILLS SCHEDULED TO REMAIN. ALL EXISTING WINDOW OPENINGS MUST BE FIELD MEASURED PRIOR TO SUBMITTAL OF SHOP DRAWINGS.
19. WERE FINISHES ARE INDICATED TO BE REMOVED, REMOVAL SHALL INCLUDE ANY GROUT, ADHESIVES, FASTENERS, AND
ALL OTHER ITEMS USED TO ATTACH THE FINISHES TO THE SURFACES THAT THEY COVER.
20. ANY FLOOR AREAS DAMAGED BY THE DEMOLITION CONTRACTOR SHALL BE PATCHED TO MATCH EXISTING.
21. WHERE CEILINGS ARE TO BE REMOVED, REMOVE ALL CEILINGS SYSTEMS COMPLETE INCLUDING GRID, TRIM HANGER, CLIPS, ETC. WHERE NEW CEILINGS ARE SPECIFIED, NO DOUBLE CEILINGS PERMITTED. REMOVE ALL ORIGINAL
CONCEALED CEILINGS WHERE ENCOUNTERED.
22. ALL EXISTING SURFACES TO REMAIN SHALL BE PROTECTED, PATCHED IF DAMAGED AND CLEANED PRIOR TO
APPLICATION OF FINISHES.
23. CONTRACTOR TO PROTECT ALL EQUIPMENT AND OTHER ELEMENTS IN AREA OF NEW OR DEMOLITION WORK.
24. REMOVE ALL CURTAINS AND BLINDS IN AREAS OF RENOVATION OR DEMOLITION, UNLESS NOTED OTHERWISE.
25. REMOVE MECHANICAL, ELECTRICAL AND PLUMBING ITEMS AS NOTED ON MECHANICAL, ELECTRICAL AND PLUMBING
PLANS. COORDINATE WITH CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, AND PLUMBING, FOR ADDITIONAL DEMOLITION NOTES. REMOVAL WORK IS INTENDED TO INCLUDE ALL ASSOCIATED ITEMS SUCH AS ELECTRICAL OUTLETS, SWITCHES, CONDUITS, CONTROLS, PIPING, MOUNTING BLOCKS, ETC., AS NOTED. THE CONTRACTOR SHALL REFER TO ALL CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING DRAWINGS AND SPECIFICATIONS FOR PROCEDURES CONCERNING RELATED TRADES IN AREAS WHICH REQUIRE DEMOLITION. REPAIR AND PATCH ANY AREAS
DAMAGED DURING REMOVAL WORK.
26. ASBESTOS CONTAINING MATERIALS (ACM) MAY BE PRESENT IN DEMOLISHED MATERIALS. CONTRACTOR TO PROVIDE TESTING AND REMEDIATE ANY MATERIAL FOUND IN SCOPE OF WORK AREA. IF ACM OR OTHER HAZARDOUS MATERIALS ARE FOUND IN PROJECT AREA AND ARE DISTURBED BY CONSTRUCTION ACTIVITY STOP WORK IMMEDIATELY AND
CONTACT THE COR FOR THE PROJECT.
GENERAL NOTES - DEMOLITION
DOOR TO BE REMOVED
CONSTRUCTION TO BE REMOVED
CONSTRUCTION TO REMAIN
DEMOLITION LEGEND
AREA NOT INCLUDED IN SCOPE
N
KEY PLAN
NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
BASEMENT FLOOR DEMO PLAN
AD-100
14 250
-3
A D
-1
/1
/2
.p d f
SCALE: 1/8" = 1'-0"AD-100
1 BASEMENT FLOOR DEMO PLAN
KEYNOTES - DEMOLITION PLAN
# DESCRIPTION
D1 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D2 REMOVE PLUMBING FIXTURES AND TOILET ACCESSORIES.
D3 REMOVE FURRED WALL STRUCTURE SLAB TO DECK
D4 REMOVE EXISTING WINDOW, FRAME, SILL, SHADES, BLINDS, AND ALL ASSOCIATED HARDWARE. PREPARE FOR NEW
WINDOW INSTALLATION OR INFILL. SEE NEW WORK PLANS
D5 REMOVE DOOR(S) AND FRAME(S). (TO INCLUDE STOPS & HOLD OPENS WHERE THEY OCCUR)
D6 REMOVE EXTERIOR MASONRY WALL (BRICK & CMU), INCLUDING ALL WINDOWS, DOORS, ETC. IN AREA INDICATED. EXIST.
FOUNDATION & FOOTING TO REMAIN IN PLACE FOR REUSE W/ NEW EXTERIOR CLOSURE SYSTEM - SEE STRUCT. DWGS.
D7 REMOVE PORTION OF WALL INDICATED. INSTALL LINTEL PER STRUCTURAL AS REQUIRED. SEE ARCHITECTURAL PLANS
FOR SIZE.
D8 REMOVE LANDING, STAIR, AND FOUNDATION
D9 REFER TO MECHANICAL DEMO PLAN
D10 REMOVE EXISTING MILLWORK AND ALL ASSOICATED COMPONENTS.
D11 CAREFULLY REMOVE EXISTING PARTITION AS NEEDED FOR NEW DOOR INSTALLATION. PROVIDE TEMPORARY SUPPORT
AT OPENING DURING CONSTRUCTION. REFER TO NEW WORK PLAN FOR NEW DOOR LOCATION
D12 CAREFULLY REMOVE EXISTING CONCRETE SLAB TO THE EXTENT SHOWN TO PREPARE FOR NEW WORK REFER TO NEW
WORK PLAN FOR DIMENSIONS
D13 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D14 REMOVE ALL ROOM FINISHES. REMOVE FLOOR FINISHES DOWN TO SLAB. PREPARE EXISTING SLAB TO RECEIVE NEW
FLOORING.
D15 REMOVE ELEVATOR AND ALL ASSOCIATED EQUIPMENT DOWN TO PIT
D16 REMOVE ALL CEILINGS AND BULKHEADS INCLUDING ALL ANCHORS, HANGERS, LIGHTING DEVICES, ETC.
D17 REMOVE LOCKERS
D18 REMOVE CORRIDOR WALL FINISHES, CORNER GUARDS, WALL PROTECTION FLOORING DOWN TO SLAB, BASE, AND ALL
OTHER FINISH ITEMS.
REV 1 - BID ADDENDUM 1 02/16/2023REV 1 - BID ADDENDUM 1 02/16/2023
2/15/2023 14 of 233
C
D
E
F
H
E.8
C.3
G
1 94 5 876321A 1910 151411 12 13 16 17 187.66.4
A.8
B.9
5.2 11a
A.A
REMOVE EXISTING
LOUVER
BRICKED IN OPENING
W/ LOUVER
DOOR W/ STOOP
AND STAIRS TO
GRADE TO BE
REMOVED
EXISTING SIDEWALK, ADA
RAMP AND STAIR TO BE
REMOVED AND DISPOSED.
DN
8 R
REMOVE SEMI-RECESSED CABINET
UNIT HEATERS UNDER WINDOWS.
TYP.
AD130
A.9
AD-130
10'-4"
BRICKED IN OPENING
W/ LOUVER
6' -2
/8
2'-3"
1'-1 3/4" 5'-6"
2'-7 1/8" 3'-4"
6'-0"
6'-1 1/4"
1/
2" 3'
-4
3' -4
1'
-9
5' -9
/8
1'
-2
3' -4
4'
-1
3/ 4"
3' -7
/4
4" 3'
-4
C.6
IT CLOSET NOT
INCLUDED IN SCOPE
3' -7
4' -9
/2
3'
-5
/8
1' -2
/8
5' -1
5/
8"
7/
8" 3'
-4
D15
D1
D1
D1
D1 D1
D1
D11
D11
D1
D1
D1
D1
D1 D1 D1
D1
D1
D1 D1
D1 D1 D1
D1
D1
D1
D1
D1 D1
D1
D1
D1 D1
D1
D1
D1
D1
D1
D1
D1
D1
D1
D1
D1
D1 D1D1
D1
D1 D1
D1
D1
D1D1
D1D1
D1
D1D1
D1
D2
D2
D2
D2
D17
D2
D2
D2
D1
D2D17
D17
D3 D3
D3 D3
D3 D3 D3
D3
D3
D3D3
D3
D3
D3
D3
D3
D3
D3
D3
D3D3D3 D3D4
D4D4
D4
D4
D4D4
D4
D4
D4
D4D4D4
D4 D4 D4
D4
D4 D4
D4
D4 D4 D4 D4
D4
D4
D4 D4 D4
D4
D4
D4
D4 D4
D4
D4
D4D4
D4
D4
D4
D4D4D4
D4
D4
D4D4
D4
D4
D4
D4D4
D4
D4
D4
D4D4D4
D4
D1
D4
D4
D5
D5
D5
D5
D5
D5
D5
D5
D5
D5
D5
D5 D5 D5 D5
D5
D5 D5
D5
D5 D5
D5
D5
D5
D5
D5
D5D5D5D5
D5D5D5D5
D5
D5
D5
D5
D5D5
D5
D5
D5
D5 D5
D5
D5
D5
D5D5
D5
D5D5
D5
D5
D5
D5
D6
D8D8
D10
D10
D10
D7
D10
D7
D11 D11 D14
D14 D14
D14
D14
D14 D14
D14
D14
D14
D14
D14
D14
D14 D14
D14
D14 D14
D14
D14 D14
D14
D14
D14
D14
D14 D14
D14 D1
12'-10 1/8"
EXISTING
FLOORING
TO
REMAIN
4' -2
/4
D12
D14
D14
D14 D14
D14 D14
D14
D14 D14 D14
D14
D14D14
D14D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14 D14
D14
D14
D14
D1
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16 D16 D16
D16
D16
D16
D16
D16 D16
D16
D16
D16
D16 D16
D16 D16
D16
D16 D16
D16
D16
D16D16
D16D16
D16
D16
D16
D16
D16
D16
D16
D16
D16D16 D16
D16
D16
D16
D16
D16
D16
D16 D16
D16
D16
D16
D16
D16 D16
D1
D1
D16
D18
D18
D18
D18 D18
D18
D18
D18
D18
D18
D18
D5
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT NOTED ON THE DEMOLITION
PLANS.
5. THE OWNER HAS FIRST RIGHT OF REFUSAL OF ALL SALVAGE ITEMS. THE CONTRACTOR SHALL PROPERLY DISPOSE OF
ALL CONSTRUCTION DEBRIS. DO NOT STOCKPILE DEBRIS ON SITE.
6. ITEMS TO BE DEMOLISHED SHALL BE REMOVED COMPLETELY INCLUDING ALL ANCHORS, HANGERS, FASTENERS, PIPES, CONDUCTS, DUCTS, ETC. UNLESS OTHERWISE INDICATED TO BE ABANDONED IN PLACE.
7. CONC. SLAB PATCHES MUST BE FLUSH WITH REMAINING SURFACES TO PERMIT APPLICATION OF FINISHES. PROVIDE
WELDED WIRE MESH IN PATCH AREAS LARGER THAT (4) FOUR SQUARE FEET.
8. CONC. SLABS TO REMAIN SHALL BE PATCHED, SCRAPED, LEVELED, AND CLEANED TO PROVIDE SURFACE SUITABLE FOR NEW FINISHES. WHERE RENOVATED AREAS ARE RECEIVING NEW UNDERGROUND MECHANICAL, PLUMBING, ELECTRICAL, OR ADDITIONAL FOUNDATION WORK, SEE MECHANICAL, PLUMBING, ELECTRIC, AND STRUCTURAL DRAWINGS, AS WELL AS ARCHITECTURAL DRAWINGS TO DETERMINE EXTENT OF REQUIRED CUT AND PATCH OF EXISTING SLAB. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONC. SLAB DEMOLITION AND REPLACEMENT NECESSARY TO INSTALL THE NEW WORK. BACKFILL ALL BELOW GRADE DEMOLITION WORK WITH SUITABLE FILL
MEETING STRUCTURAL REQUIREMENTS FOR NEW WORK.
9. PARTITIONS SHOWN TO BE REMOVED SHALL BE CONFIRMED BY THE CONTRACTOR AS TO TYPE OF PARTITION AND EXACT LOCATION. COMPLETELY REMOVE PARTITIONS FROM FLOOR TO STRUCTURE ABOVE INCLUDING BASE, ALL FASTENERS, GROUTS, SEAL ANTS, ETC., UNLESS NOTED OTHERWISE. MASONRY PARTITIONS WHICH EXTEND THROUGH THE SLAB SHALL BE REMOVED TO 8" BELOW FINISH FLOOR. FILL SLAB OPENING WITH CONCRETE FILL TO RECEIVE FINISH FLOOR. WHERE WALLS SCHEDULED TO BE REMOVED SIT ON SLABS, GRIND SLAB TO RECEIVE FINISH FLOOR.
10. REMOVE, PATCH AND REPAIR PORTIONS OF WALL PARTITIONS WHICH CONFLICT WITH NEW WORK TO BE INSTALLED, EVEN IF NOT SPECIFICALLY NOTED TO BE DEMOLISHED ON PLANS.
11. WALLS TO BE REMOVED FROM INTERSECTING WALLS SHALL INCLUDE TOOTHED IN REPLACEMENT OF DAMAGED MASONRY ON WALL TO REMAIN AND REMOVAL OF TIES PROJECTING FROM WALLS. SEE DETAILS FOR ADDITIONAL
CONDITIONS.
12. WALLS TO BE PARTIALLY REMOVED SHALL BE TERMINATED WITH FINISHED MASONRY ENDS BY TOOTHING IN NEW MASONRY UNITS, TO MATCH ADJACENT MASONRY. SEE DETAILS FOR OTHER CONDITIONS. NO WALLS SHALL BE
TERMINATED WITH EXPOSED OPEN CELLS OR DAMAGED MASONRY UNITS.
13. WHERE NEW OPENINGS ARE SHOWN IN EXISTING WALLS, CAREFULLY REMOVE MASONRY TO NEAREST JOINT LINE WITHOUT DISTURBING ADJACENT WORK SO THAT NEW WORK CAN BE PATCHED IN TO MATCH. ALL NEW MASONRY
WORK SHALL BE TOOTHED IN.
14. ALL EXISTING STRUCTURE SHALL REMAIN, UNLESS NOTED OTHERWISE.
15. COORDINATE DEMOLITION OF ALL STRUCTURAL ITEMS (COLUMNS, BEAMS, SLABS, ET, ETC.) WITH STRUCTURAL DWGS.
EXTENT OF DEMOLITION AREA SHALL BE IN ACCORDANCE WITH STRUCTURAL REQUIREMENTS AND COORDINATED WITH
ALL NEW WORK.
16. TEMPORARILY SUPPORT ALL BEAMS, LINTELS, PORTIONS OF WALLS ETC., TO BE DISTURBED BY DEMOLITION WORK, UNTIL THEY ARE RE-SUPPORTED BY NEW WORK.
17. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE INTEGRITY OF EXISTING BUILDING ELEMENTS TO REMAIN THROUGHOUT SEQUENCE OF WORK. ANY DAMAGE TO EXISTING BUILDING CONDITIONS SHOWN TO REMAIN SHALL BE
RESTORED TO NEW WORK CONDITION AT NO ADDITIONAL COST TO THE OWNER.
18. WINDOWS SCHEDULED FOR REMOVAL SHALL BE REMOVED COMPLETELY. FASTENERS MAY BE CUT FLUSH WITH HEAD, JAMBS, AND SILLS IF THE NEW WINDOW UNIT WILL CONCEAL FASTENER. PROTECT EXISTING SILLS SCHEDULED TO REMAIN. ALL EXISTING WINDOW OPENINGS MUST BE FIELD MEASURED PRIOR TO SUBMITTAL OF SHOP DRAWINGS.
19. WERE FINISHES ARE INDICATED TO BE REMOVED, REMOVAL SHALL INCLUDE ANY GROUT, ADHESIVES, FASTENERS, AND
ALL OTHER ITEMS USED TO ATTACH THE FINISHES TO THE SURFACES THAT THEY COVER.
20. ANY FLOOR AREAS DAMAGED BY THE DEMOLITION CONTRACTOR SHALL BE PATCHED TO MATCH EXISTING.
21. WHERE CEILINGS ARE TO BE REMOVED, REMOVE ALL CEILINGS SYSTEMS COMPLETE INCLUDING GRID, TRIM HANGER, CLIPS, ETC. WHERE NEW CEILINGS ARE SPECIFIED, NO DOUBLE CEILINGS PERMITTED. REMOVE ALL ORIGINAL
CONCEALED CEILINGS WHERE ENCOUNTERED.
22. ALL EXISTING SURFACES TO REMAIN SHALL BE PROTECTED, PATCHED IF DAMAGED AND CLEANED PRIOR TO
APPLICATION OF FINISHES.
23. CONTRACTOR TO PROTECT ALL EQUIPMENT AND OTHER ELEMENTS IN AREA OF NEW OR DEMOLITION WORK.
24. REMOVE ALL CURTAINS AND BLINDS IN AREAS OF RENOVATION OR DEMOLITION, UNLESS NOTED OTHERWISE.
25. REMOVE MECHANICAL, ELECTRICAL AND PLUMBING ITEMS AS NOTED ON MECHANICAL, ELECTRICAL AND PLUMBING
PLANS. COORDINATE WITH CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, AND PLUMBING, FOR ADDITIONAL DEMOLITION NOTES. REMOVAL WORK IS INTENDED TO INCLUDE ALL ASSOCIATED ITEMS SUCH AS ELECTRICAL OUTLETS, SWITCHES, CONDUITS, CONTROLS, PIPING, MOUNTING BLOCKS, ETC., AS NOTED. THE CONTRACTOR SHALL REFER TO ALL CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING DRAWINGS AND SPECIFICATIONS FOR PROCEDURES CONCERNING RELATED TRADES IN AREAS WHICH REQUIRE DEMOLITION. REPAIR AND PATCH ANY AREAS
DAMAGED DURING REMOVAL WORK.
26. ASBESTOS CONTAINING MATERIALS (ACM) MAY BE PRESENT IN DEMOLISHED MATERIALS. CONTRACTOR TO PROVIDE TESTING AND REMEDIATE ANY MATERIAL FOUND IN SCOPE OF WORK AREA. IF ACM OR OTHER HAZARDOUS MATERIALS ARE FOUND IN PROJECT AREA AND ARE DISTURBED BY CONSTRUCTION ACTIVITY STOP WORK IMMEDIATELY AND
CONTACT THE COR FOR THE PROJECT.
GENERAL NOTES - DEMOLITION
DOOR TO BE REMOVED
CONSTRUCTION TO BE REMOVED
CONSTRUCTION TO REMAIN
DEMOLITION LEGEND
AREA NOT INCLUDED IN SCOPE
N
KEY PLAN
NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
FIRST FLOOR DEMO PLAN
AD-101
15 250
-3
A D
-1
/2
/2
.p d f
SCALE: 1/8" = 1'-0"AD-101
1 FIRST FLOOR DEMO PLAN
KEYNOTES - DEMOLITION PLAN
# DESCRIPTION
D1 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D2 REMOVE PLUMBING FIXTURES AND TOILET ACCESSORIES.
D3 REMOVE FURRED WALL STRUCTURE SLAB TO DECK
D4 REMOVE EXISTING WINDOW, FRAME, SILL, SHADES, BLINDS, AND ALL ASSOCIATED HARDWARE. PREPARE FOR NEW
WINDOW INSTALLATION OR INFILL. SEE NEW WORK PLANS
D5 REMOVE DOOR(S) AND FRAME(S). (TO INCLUDE STOPS & HOLD OPENS WHERE THEY OCCUR)
D6 REMOVE EXTERIOR MASONRY WALL (BRICK & CMU), INCLUDING ALL WINDOWS, DOORS, ETC. IN AREA INDICATED. EXIST.
FOUNDATION & FOOTING TO REMAIN IN PLACE FOR REUSE W/ NEW EXTERIOR CLOSURE SYSTEM - SEE STRUCT. DWGS.
D7 REMOVE PORTION OF WALL INDICATED. INSTALL LINTEL PER STRUCTURAL AS REQUIRED. SEE ARCHITECTURAL PLANS
FOR SIZE.
D8 REMOVE LANDING, STAIR, AND FOUNDATION
D9 REFER TO MECHANICAL DEMO PLAN
D10 REMOVE EXISTING MILLWORK AND ALL ASSOICATED COMPONENTS.
D11 CAREFULLY REMOVE EXISTING PARTITION AS NEEDED FOR NEW DOOR INSTALLATION. PROVIDE TEMPORARY SUPPORT
AT OPENING DURING CONSTRUCTION. REFER TO NEW WORK PLAN FOR NEW DOOR LOCATION
D12 CAREFULLY REMOVE EXISTING CONCRETE SLAB TO THE EXTENT SHOWN TO PREPARE FOR NEW WORK REFER TO NEW
WORK PLAN FOR DIMENSIONS
D13 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D14 REMOVE ALL ROOM FINISHES. REMOVE FLOOR FINISHES DOWN TO SLAB. PREPARE EXISTING SLAB TO RECEIVE NEW
FLOORING.
D15 REMOVE ELEVATOR AND ALL ASSOCIATED EQUIPMENT DOWN TO PIT
D16 REMOVE ALL CEILINGS AND BULKHEADS INCLUDING ALL ANCHORS, HANGERS, LIGHTING DEVICES, ETC.
D17 REMOVE LOCKERS
D18 REMOVE CORRIDOR WALL FINISHES, CORNER GUARDS, WALL PROTECTION FLOORING DOWN TO SLAB, BASE, AND ALL
OTHER FINISH ITEMS.
REV 1 - BID ADDENDUM 1 02/16/2023
15 of 2332/15/2023 15 of 233
C
D
E
F
H
E.8
C.3
G
1 94 5 876321A 1910 151411 12 13 16 17 187.66.4
A.8
B.9
5.2 11a
A.A
D6
D3
D4
D1
D5
D4
D4
D4
D4
D4
D4
D4
D4
D1
D15
AD130
D9
D9
A.9
AD-130
D4
D4
D3 D4 D3 D4
D4 D4
D3 D3
D3 D3
D3 D3 D3
D3
D3
D3
D3
D4
D4 D4 D4
D4
D4 D4 D4 D4
D4
D4
D4 D4 D4
D4
D4
D4
D4 D4
D4
D4
D4
D4 D4
D4
D4
D4
D4D4D4
D4
D4
D4 D4 D4
D4
D4
D4
D4
D4D4D4
D4
D4
D4
D4
D4 D4
D4
D4
D4
D4 D4
D4 D4
D1
D1
D1
D1
D1D1 D1 D1
D1
D1
D1
D1
D1
D1
D1
D1
D1 D1
D1
D1
D11
D11
D1
D11
D5 D5
D11
D5
D5
D11 D5
D11
D11
D5 D5
D5
D5
D5
D5D5
D5
D5 D5 D5 D5
D5 D5
D5
D5
D11
D1
D1
D5
D5 D5
D11
D11
D11
D5
D5
D11
D11
D11
D5
D5
D11
D11
D4 D4 D4
D5 D1
D4
D4
D4
D3
D3
D3
DETAIL
3/AE506
DETAIL
3/AE506
DETAIL
3/AE506
DETAIL
3/AE506
D13
D13
D13
D13
3'-2" 3'-4"
3' -4
2'
-7
/4
3' -4
7'
-2
3' -4
2' -1
3'
-4
3' -4
3"
6' -3
3'
-4
9' -1
3/
4"
1/
2" 3'
-4
BASED ON LABORATORY ANALYSIS OF
BULK SAMPLES TAKEN THROUGH OUT
NURSE STATION HAVE ASBESTOS MASTIC
PRESENT UNDER THE FLOOR TILE
C.6
IT CLOSET NOT
INCLUDED IN SCOPE
D14
D14
D14
D14
D14
D14
D14 D14
D14
D14 D14 D14
D14
D14 D14
D14
D14
D14D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14
D14 D14
D14 D14
D14D14
D14
D14 D14
D14
D14 D14
D14
D14
D14D14D14
D14
D14
D14
D14
D14
D14
D14
D1 D4
D5
D5
D1
D1 D1
D1
D1
D1
D1
D1 D1
D1
D1
D1
D1
D1D1
D1
D1
D3
D1
D1
D1
D5
D1
D11
D1
D11
D11
D1
D1 D3
D1
D1
D2
D2
D2 D2 D2
D2
D2 D2
D2
D2
D2
D2
D2
D3
D3D3
D5
D5 D5
D5
D5
D5
D5
D5
D5
D5D5D5
D5
D5D5
D5
D10
D10
D10D2
D2
D15
D11
D1
D11
D16
D16
D16
D16
D16
D16
D16 D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16 D16
D16
D16
D16 D16
D16
D16
D16 D16
D16
D16D16
D16
D16D16D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D18
D18
D18
D18
D18
D18
D18 D18
D18
D18
D18
3' -4
"8
/4
3' -4
7'
-5
/2
5" 3'-6" 2'-0"
6' -3
/4
1'-8"
7' -0
/4
3'
-4
5' -1
3/
8" 3'
-4
16'-9 1/2" 3'-4"
3'-4" 6'-6 1/2"
3' -4
"3' -4
2' -0
/4
3'
-6
1' -8
4'
-2
3/
4"
3' -4
3 7/8" 3'-10"
2' -1
3/
4" 4'
-1
1/ 2"
2' -0
/4
3' -4
3' -4
3'
-1
7/ 8"
5' -6
/4
3' -1
/4
10'-11 1/2"
2'-2" 3'-4"
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT NOTED ON THE DEMOLITION
PLANS.
5. THE OWNER HAS FIRST RIGHT OF REFUSAL OF ALL SALVAGE ITEMS. THE CONTRACTOR SHALL PROPERLY DISPOSE OF
ALL CONSTRUCTION DEBRIS. DO NOT STOCKPILE DEBRIS ON SITE.
6. ITEMS TO BE DEMOLISHED SHALL BE REMOVED COMPLETELY INCLUDING ALL ANCHORS, HANGERS, FASTENERS, PIPES, CONDUCTS, DUCTS, ETC. UNLESS OTHERWISE INDICATED TO BE ABANDONED IN PLACE.
7. CONC. SLAB PATCHES MUST BE FLUSH WITH REMAINING SURFACES TO PERMIT APPLICATION OF FINISHES. PROVIDE
WELDED WIRE MESH IN PATCH AREAS LARGER THAT (4) FOUR SQUARE FEET.
8. CONC. SLABS TO REMAIN SHALL BE PATCHED, SCRAPED, LEVELED, AND CLEANED TO PROVIDE SURFACE SUITABLE FOR NEW FINISHES. WHERE RENOVATED AREAS ARE RECEIVING NEW UNDERGROUND MECHANICAL, PLUMBING, ELECTRICAL, OR ADDITIONAL FOUNDATION WORK, SEE MECHANICAL, PLUMBING, ELECTRIC, AND STRUCTURAL DRAWINGS, AS WELL AS ARCHITECTURAL DRAWINGS TO DETERMINE EXTENT OF REQUIRED CUT AND PATCH OF EXISTING SLAB. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONC. SLAB DEMOLITION AND REPLACEMENT NECESSARY TO INSTALL THE NEW WORK. BACKFILL ALL BELOW GRADE DEMOLITION WORK WITH SUITABLE FILL
MEETING STRUCTURAL REQUIREMENTS FOR NEW WORK.
9. PARTITIONS SHOWN TO BE REMOVED SHALL BE CONFIRMED BY THE CONTRACTOR AS TO TYPE OF PARTITION AND EXACT LOCATION. COMPLETELY REMOVE PARTITIONS FROM FLOOR TO STRUCTURE ABOVE INCLUDING BASE, ALL FASTENERS, GROUTS, SEAL ANTS, ETC., UNLESS NOTED OTHERWISE. MASONRY PARTITIONS WHICH EXTEND THROUGH THE SLAB SHALL BE REMOVED TO 8" BELOW FINISH FLOOR. FILL SLAB OPENING WITH CONCRETE FILL TO RECEIVE FINISH FLOOR. WHERE WALLS SCHEDULED TO BE REMOVED SIT ON SLABS, GRIND SLAB TO RECEIVE FINISH FLOOR.
10. REMOVE, PATCH AND REPAIR PORTIONS OF WALL PARTITIONS WHICH CONFLICT WITH NEW WORK TO BE INSTALLED, EVEN IF NOT SPECIFICALLY NOTED TO BE DEMOLISHED ON PLANS.
11. WALLS TO BE REMOVED FROM INTERSECTING WALLS SHALL INCLUDE TOOTHED IN REPLACEMENT OF DAMAGED MASONRY ON WALL TO REMAIN AND REMOVAL OF TIES PROJECTING FROM WALLS. SEE DETAILS FOR ADDITIONAL
CONDITIONS.
12. WALLS TO BE PARTIALLY REMOVED SHALL BE TERMINATED WITH FINISHED MASONRY ENDS BY TOOTHING IN NEW MASONRY UNITS, TO MATCH ADJACENT MASONRY. SEE DETAILS FOR OTHER CONDITIONS. NO WALLS SHALL BE
TERMINATED WITH EXPOSED OPEN CELLS OR DAMAGED MASONRY UNITS.
13. WHERE NEW OPENINGS ARE SHOWN IN EXISTING WALLS, CAREFULLY REMOVE MASONRY TO NEAREST JOINT LINE WITHOUT DISTURBING ADJACENT WORK SO THAT NEW WORK CAN BE PATCHED IN TO MATCH. ALL NEW MASONRY
WORK SHALL BE TOOTHED IN.
14. ALL EXISTING STRUCTURE SHALL REMAIN, UNLESS NOTED OTHERWISE.
15. COORDINATE DEMOLITION OF ALL STRUCTURAL ITEMS (COLUMNS, BEAMS, SLABS, ET, ETC.) WITH STRUCTURAL DWGS.
EXTENT OF DEMOLITION AREA SHALL BE IN ACCORDANCE WITH STRUCTURAL REQUIREMENTS AND COORDINATED WITH
ALL NEW WORK.
16. TEMPORARILY SUPPORT ALL BEAMS, LINTELS, PORTIONS OF WALLS ETC., TO BE DISTURBED BY DEMOLITION WORK, UNTIL THEY ARE RE-SUPPORTED BY NEW WORK.
17. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE INTEGRITY OF EXISTING BUILDING ELEMENTS TO REMAIN THROUGHOUT SEQUENCE OF WORK. ANY DAMAGE TO EXISTING BUILDING CONDITIONS SHOWN TO REMAIN SHALL BE
RESTORED TO NEW WORK CONDITION AT NO ADDITIONAL COST TO THE OWNER.
18. WINDOWS SCHEDULED FOR REMOVAL SHALL BE REMOVED COMPLETELY. FASTENERS MAY BE CUT FLUSH WITH HEAD, JAMBS, AND SILLS IF THE NEW WINDOW UNIT WILL CONCEAL FASTENER. PROTECT EXISTING SILLS SCHEDULED TO REMAIN. ALL EXISTING WINDOW OPENINGS MUST BE FIELD MEASURED PRIOR TO SUBMITTAL OF SHOP DRAWINGS.
19. WERE FINISHES ARE INDICATED TO BE REMOVED, REMOVAL SHALL INCLUDE ANY GROUT, ADHESIVES, FASTENERS, AND
ALL OTHER ITEMS USED TO ATTACH THE FINISHES TO THE SURFACES THAT THEY COVER.
20. ANY FLOOR AREAS DAMAGED BY THE DEMOLITION CONTRACTOR SHALL BE PATCHED TO MATCH EXISTING.
21. WHERE CEILINGS ARE TO BE REMOVED, REMOVE ALL CEILINGS SYSTEMS COMPLETE INCLUDING GRID, TRIM HANGER, CLIPS, ETC. WHERE NEW CEILINGS ARE SPECIFIED, NO DOUBLE CEILINGS PERMITTED. REMOVE ALL ORIGINAL
CONCEALED CEILINGS WHERE ENCOUNTERED.
22. ALL EXISTING SURFACES TO REMAIN SHALL BE PROTECTED, PATCHED IF DAMAGED AND CLEANED PRIOR TO
APPLICATION OF FINISHES.
23. CONTRACTOR TO PROTECT ALL EQUIPMENT AND OTHER ELEMENTS IN AREA OF NEW OR DEMOLITION WORK.
24. REMOVE ALL CURTAINS AND BLINDS IN AREAS OF RENOVATION OR DEMOLITION, UNLESS NOTED OTHERWISE.
25. REMOVE MECHANICAL, ELECTRICAL AND PLUMBING ITEMS AS NOTED ON MECHANICAL, ELECTRICAL AND PLUMBING
PLANS. COORDINATE WITH CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, AND PLUMBING, FOR ADDITIONAL DEMOLITION NOTES. REMOVAL WORK IS INTENDED TO INCLUDE ALL ASSOCIATED ITEMS SUCH AS ELECTRICAL OUTLETS, SWITCHES, CONDUITS, CONTROLS, PIPING, MOUNTING BLOCKS, ETC., AS NOTED. THE CONTRACTOR SHALL REFER TO ALL CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING DRAWINGS AND SPECIFICATIONS FOR PROCEDURES CONCERNING RELATED TRADES IN AREAS WHICH REQUIRE DEMOLITION. REPAIR AND PATCH ANY AREAS
DAMAGED DURING REMOVAL WORK.
26. ASBESTOS CONTAINING MATERIALS (ACM) MAY BE PRESENT IN DEMOLISHED MATERIALS. CONTRACTOR TO PROVIDE TESTING AND REMEDIATE ANY MATERIAL FOUND IN SCOPE OF WORK AREA. IF ACM OR OTHER HAZARDOUS MATERIALS ARE FOUND IN PROJECT AREA AND ARE DISTURBED BY CONSTRUCTION ACTIVITY STOP WORK IMMEDIATELY AND
CONTACT THE COR FOR THE PROJECT.
GENERAL NOTES - DEMOLITION
DOOR TO BE REMOVED
CONSTRUCTION TO BE REMOVED
CONSTRUCTION TO REMAIN
DEMOLITION LEGEND
AREA NOT INCLUDED IN SCOPE
N
KEY PLAN
NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
SECOND FLOOR DEMO PLAN
AD-102
16 250
-3
A D
-1
/1
/2
.p d f
SCALE: 1/8" = 1'-0"AD-102
1 SECOND FLOOR DEMO PLAN
KEYNOTES - DEMOLITION PLAN
# DESCRIPTION
D1 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D2 REMOVE PLUMBING FIXTURES AND TOILET ACCESSORIES.
D3 REMOVE FURRED WALL STRUCTURE SLAB TO DECK
D4 REMOVE EXISTING WINDOW, FRAME, SILL, SHADES, BLINDS, AND ALL ASSOCIATED HARDWARE. PREPARE FOR NEW
WINDOW INSTALLATION OR INFILL. SEE NEW WORK PLANS
D5 REMOVE DOOR(S) AND FRAME(S). (TO INCLUDE STOPS & HOLD OPENS WHERE THEY OCCUR)
D6 REMOVE EXTERIOR MASONRY WALL (BRICK & CMU), INCLUDING ALL WINDOWS, DOORS, ETC. IN AREA INDICATED. EXIST.
FOUNDATION & FOOTING TO REMAIN IN PLACE FOR REUSE W/ NEW EXTERIOR CLOSURE SYSTEM - SEE STRUCT. DWGS.
D7 REMOVE PORTION OF WALL INDICATED. INSTALL LINTEL PER STRUCTURAL AS REQUIRED. SEE ARCHITECTURAL PLANS
FOR SIZE.
D8 REMOVE LANDING, STAIR, AND FOUNDATION
D9 REFER TO MECHANICAL DEMO PLAN
D10 REMOVE EXISTING MILLWORK AND ALL ASSOICATED COMPONENTS.
D11 CAREFULLY REMOVE EXISTING PARTITION AS NEEDED FOR NEW DOOR INSTALLATION. PROVIDE TEMPORARY SUPPORT
AT OPENING DURING CONSTRUCTION. REFER TO NEW WORK PLAN FOR NEW DOOR LOCATION
D12 CAREFULLY REMOVE EXISTING CONCRETE SLAB TO THE EXTENT SHOWN TO PREPARE FOR NEW WORK REFER TO NEW
WORK PLAN FOR DIMENSIONS
D13 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D14 REMOVE ALL ROOM FINISHES. REMOVE FLOOR FINISHES DOWN TO SLAB. PREPARE EXISTING SLAB TO RECEIVE NEW
FLOORING.
D15 REMOVE ELEVATOR AND ALL ASSOCIATED EQUIPMENT DOWN TO PIT
D16 REMOVE ALL CEILINGS AND BULKHEADS INCLUDING ALL ANCHORS, HANGERS, LIGHTING DEVICES, ETC.
D17 REMOVE LOCKERS
D18 REMOVE CORRIDOR WALL FINISHES, CORNER GUARDS, WALL PROTECTION FLOORING DOWN TO SLAB, BASE, AND ALL
OTHER FINISH ITEMS.
2/15/2023 16 of 233
C
D
E
F
H
E.8
C.3
G
1 94 5 876321A 1910 151411 12 13 16 17 187.66.4
A.8
B.9
5.2 11a
A.A
D6
D3 D3
D1
D3
D3
D1
D2 D1
AD130
A.9
AD-130
D3
D3 D3
D3
D3
D3
D3 D3
D3
D
D3
D3
D3
D3 D3 D3
D3D3D3
D1
D1
D1
D1 D1
D1
D1
D1
D11
D5
D11
D1
D1 D5
D11 D1
D1
D11 D5
D1
D1 D1
D1 D1 D1
D5 D5 D5 D5
D5 D5 D5
D1 D5
D11
D11
D1
D1
D1
D1
D1
D1
D5
D5
D5 D5
D11
D1
D1
D1
D18
D5D5
D5
D1
D5D5
D5D5
D1
D1
D1 D1
D11
D1 D1
D1
D5
D1
D5
C.6
IT CLOSET NOT
INCLUDED IN SCOPE
D1
D1
D1
D1
D1
D1
D1 D1
D1
D11
D11
D1
D1
D1
D1
D1
D1
D1
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4 D4
D4 D4
D4
D4 D4 D4
D4
D4 D4 D4 D4
D4
D4
D4 D4 D4
D4
D4
D4
D4 D4
D4
D4
D4
D4 D4
D4
D4
D4
D4D4D4
D4
D4
D4 D4 D4
D4
D4
D4
D4
D4D4D4
D4
D4
D4
D4
D4 D4
D4
D4
D4
D4 D4
D4 D4
D4 D4 D4
D4
D4
D4
D4
D5
D5
D5
D5
D5
D5 D5
D5 D5
D5
D5
D5
D5
D5
D5 D5
D5
D5
D5
D5
D5
D5
D5
D5
D5
D4
D10
D10 D10
D11
D11
D11
D11
D11
D11
D11
D14
D14
D14 D14
D14
D14
D14
D14 D14
D14
D14
D14
D14
D14
D14
D14
D14 D14 D14
D14
D14 D14
D14
D14
D14 D14
D14
D14
D14
D14D14
D14
D14
D14 D14D14
D14
D14
D14D14
D14
D14 D14
D14D14
D14 D14
D14
D14
D14
D16
D16
D16 D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16
D16 D16
D16
D16 D16 D16
D16
D16
D16
D16
D16
D16
D16
D16 D16
D16
D16
D16
D16
D16
D16
D16
D16
D16 D16D16
D16
D16
D16
D16
D16
D16
D16
D16
D16 D16
D16
2' -1
/8
9'
-5
/4
D16
D16
D16
D16
D18
D18
D18D18
D18
D18
D18
D18
D18
D18
'-7
/8
'-0
/2
11'-7 5/8"
2'-7" 3'-4" 5'-10 5/8"
'-4
/8
D11 3' -4
7'
-2
/2
1'-0 1/8"5'-5 1/2" 3'-4"1'-4 5/8"
3'-4" 1'-5 1/8"
6' -6
/2
3'
-4 "1
'-0
/4 "3
'-4
6' -7
/4
3'
-4 "1
'-8
/8 "3
'-4
7'-2" 3'-4" 8"
11'-1 1/2"
3/
4" 3'
-6
1' -2
3' -4
7'
-7 " 6' -4
/8
2' -1
/4
3'
-4
8' -9
3' -4
4'
-0
/8
5' -7
/4
3'
-7
/4
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT NOTED ON THE DEMOLITION
PLANS.
5. THE OWNER HAS FIRST RIGHT OF REFUSAL OF ALL SALVAGE ITEMS. THE CONTRACTOR SHALL PROPERLY DISPOSE OF
ALL CONSTRUCTION DEBRIS. DO NOT STOCKPILE DEBRIS ON SITE.
6. ITEMS TO BE DEMOLISHED SHALL BE REMOVED COMPLETELY INCLUDING ALL ANCHORS, HANGERS, FASTENERS, PIPES, CONDUCTS, DUCTS, ETC. UNLESS OTHERWISE INDICATED TO BE ABANDONED IN PLACE.
7. CONC. SLAB PATCHES MUST BE FLUSH WITH REMAINING SURFACES TO PERMIT APPLICATION OF FINISHES. PROVIDE
WELDED WIRE MESH IN PATCH AREAS LARGER THAT (4) FOUR SQUARE FEET.
8. CONC. SLABS TO REMAIN SHALL BE PATCHED, SCRAPED, LEVELED, AND CLEANED TO PROVIDE SURFACE SUITABLE FOR NEW FINISHES. WHERE RENOVATED AREAS ARE RECEIVING NEW UNDERGROUND MECHANICAL, PLUMBING, ELECTRICAL, OR ADDITIONAL FOUNDATION WORK, SEE MECHANICAL, PLUMBING, ELECTRIC, AND STRUCTURAL DRAWINGS, AS WELL AS ARCHITECTURAL DRAWINGS TO DETERMINE EXTENT OF REQUIRED CUT AND PATCH OF EXISTING SLAB. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONC. SLAB DEMOLITION AND REPLACEMENT NECESSARY TO INSTALL THE NEW WORK. BACKFILL ALL BELOW GRADE DEMOLITION WORK WITH SUITABLE FILL
MEETING STRUCTURAL REQUIREMENTS FOR NEW WORK.
9. PARTITIONS SHOWN TO BE REMOVED SHALL BE CONFIRMED BY THE CONTRACTOR AS TO TYPE OF PARTITION AND EXACT LOCATION. COMPLETELY REMOVE PARTITIONS FROM FLOOR TO STRUCTURE ABOVE INCLUDING BASE, ALL FASTENERS, GROUTS, SEAL ANTS, ETC., UNLESS NOTED OTHERWISE. MASONRY PARTITIONS WHICH EXTEND THROUGH THE SLAB SHALL BE REMOVED TO 8" BELOW FINISH FLOOR. FILL SLAB OPENING WITH CONCRETE FILL TO RECEIVE FINISH FLOOR. WHERE WALLS SCHEDULED TO BE REMOVED SIT ON SLABS, GRIND SLAB TO RECEIVE FINISH FLOOR.
10. REMOVE, PATCH AND REPAIR PORTIONS OF WALL PARTITIONS WHICH CONFLICT WITH NEW WORK TO BE INSTALLED, EVEN IF NOT SPECIFICALLY NOTED TO BE DEMOLISHED ON PLANS.
11. WALLS TO BE REMOVED FROM INTERSECTING WALLS SHALL INCLUDE TOOTHED IN REPLACEMENT OF DAMAGED MASONRY ON WALL TO REMAIN AND REMOVAL OF TIES PROJECTING FROM WALLS. SEE DETAILS FOR ADDITIONAL
CONDITIONS.
12. WALLS TO BE PARTIALLY REMOVED SHALL BE TERMINATED WITH FINISHED MASONRY ENDS BY TOOTHING IN NEW MASONRY UNITS, TO MATCH ADJACENT MASONRY. SEE DETAILS FOR OTHER CONDITIONS. NO WALLS SHALL BE
TERMINATED WITH EXPOSED OPEN CELLS OR DAMAGED MASONRY UNITS.
13. WHERE NEW OPENINGS ARE SHOWN IN EXISTING WALLS, CAREFULLY REMOVE MASONRY TO NEAREST JOINT LINE WITHOUT DISTURBING ADJACENT WORK SO THAT NEW WORK CAN BE PATCHED IN TO MATCH. ALL NEW MASONRY
WORK SHALL BE TOOTHED IN.
14. ALL EXISTING STRUCTURE SHALL REMAIN, UNLESS NOTED OTHERWISE.
15. COORDINATE DEMOLITION OF ALL STRUCTURAL ITEMS (COLUMNS, BEAMS, SLABS, ET, ETC.) WITH STRUCTURAL DWGS.
EXTENT OF DEMOLITION AREA SHALL BE IN ACCORDANCE WITH STRUCTURAL REQUIREMENTS AND COORDINATED WITH
ALL NEW WORK.
16. TEMPORARILY SUPPORT ALL BEAMS, LINTELS, PORTIONS OF WALLS ETC., TO BE DISTURBED BY DEMOLITION WORK, UNTIL THEY ARE RE-SUPPORTED BY NEW WORK.
17. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE INTEGRITY OF EXISTING BUILDING ELEMENTS TO REMAIN THROUGHOUT SEQUENCE OF WORK. ANY DAMAGE TO EXISTING BUILDING CONDITIONS SHOWN TO REMAIN SHALL BE
RESTORED TO NEW WORK CONDITION AT NO ADDITIONAL COST TO THE OWNER.
18. WINDOWS SCHEDULED FOR REMOVAL SHALL BE REMOVED COMPLETELY. FASTENERS MAY BE CUT FLUSH WITH HEAD, JAMBS, AND SILLS IF THE NEW WINDOW UNIT WILL CONCEAL FASTENER. PROTECT EXISTING SILLS SCHEDULED TO REMAIN. ALL EXISTING WINDOW OPENINGS MUST BE FIELD MEASURED PRIOR TO SUBMITTAL OF SHOP DRAWINGS.
19. WERE FINISHES ARE INDICATED TO BE REMOVED, REMOVAL SHALL INCLUDE ANY GROUT, ADHESIVES, FASTENERS, AND
ALL OTHER ITEMS USED TO ATTACH THE FINISHES TO THE SURFACES THAT THEY COVER.
20. ANY FLOOR AREAS DAMAGED BY THE DEMOLITION CONTRACTOR SHALL BE PATCHED TO MATCH EXISTING.
21. WHERE CEILINGS ARE TO BE REMOVED, REMOVE ALL CEILINGS SYSTEMS COMPLETE INCLUDING GRID, TRIM HANGER, CLIPS, ETC. WHERE NEW CEILINGS ARE SPECIFIED, NO DOUBLE CEILINGS PERMITTED. REMOVE ALL ORIGINAL
CONCEALED CEILINGS WHERE ENCOUNTERED.
22. ALL EXISTING SURFACES TO REMAIN SHALL BE PROTECTED, PATCHED IF DAMAGED AND CLEANED PRIOR TO
APPLICATION OF FINISHES.
23. CONTRACTOR TO PROTECT ALL EQUIPMENT AND OTHER ELEMENTS IN AREA OF NEW OR DEMOLITION WORK.
24. REMOVE ALL CURTAINS AND BLINDS IN AREAS OF RENOVATION OR DEMOLITION, UNLESS NOTED OTHERWISE.
25. REMOVE MECHANICAL, ELECTRICAL AND PLUMBING ITEMS AS NOTED ON MECHANICAL, ELECTRICAL AND PLUMBING
PLANS. COORDINATE WITH CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, AND PLUMBING, FOR ADDITIONAL DEMOLITION NOTES. REMOVAL WORK IS INTENDED TO INCLUDE ALL ASSOCIATED ITEMS SUCH AS ELECTRICAL OUTLETS, SWITCHES, CONDUITS, CONTROLS, PIPING, MOUNTING BLOCKS, ETC., AS NOTED. THE CONTRACTOR SHALL REFER TO ALL CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING DRAWINGS AND SPECIFICATIONS FOR PROCEDURES CONCERNING RELATED TRADES IN AREAS WHICH REQUIRE DEMOLITION. REPAIR AND PATCH ANY AREAS
DAMAGED DURING REMOVAL WORK.
26. ASBESTOS CONTAINING MATERIALS (ACM) MAY BE PRESENT IN DEMOLISHED MATERIALS. CONTRACTOR TO PROVIDE TESTING AND REMEDIATE ANY MATERIAL FOUND IN SCOPE OF WORK AREA. IF ACM OR OTHER HAZARDOUS MATERIALS ARE FOUND IN PROJECT AREA AND ARE DISTURBED BY CONSTRUCTION ACTIVITY STOP WORK IMMEDIATELY AND
CONTACT THE COR FOR THE PROJECT.
GENERAL NOTES - DEMOLITION
DOOR TO BE REMOVED
CONSTRUCTION TO BE REMOVED
CONSTRUCTION TO REMAIN
DEMOLITION LEGEND
AREA NOT INCLUDED IN SCOPE
N
KEY PLAN
NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
THIRD FLOOR DEMO PLAN
AD-103
17 250
-3
A D
-1
/1
/2
.p d f
SCALE: 1/8" = 1'-0"AD-103
1 THIRD FLOOR DEMO PLAN
KEYNOTES - DEMOLITION PLAN
# DESCRIPTION
D1 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D2 REMOVE PLUMBING FIXTURES AND TOILET ACCESSORIES.
D3 REMOVE FURRED WALL STRUCTURE SLAB TO DECK
D4 REMOVE EXISTING WINDOW, FRAME, SILL, SHADES, BLINDS, AND ALL ASSOCIATED HARDWARE. PREPARE FOR NEW
WINDOW INSTALLATION OR INFILL. SEE NEW WORK PLANS
D5 REMOVE DOOR(S) AND FRAME(S). (TO INCLUDE STOPS & HOLD OPENS WHERE THEY OCCUR)
D6 REMOVE EXTERIOR MASONRY WALL (BRICK & CMU), INCLUDING ALL WINDOWS, DOORS, ETC. IN AREA INDICATED. EXIST.
FOUNDATION & FOOTING TO REMAIN IN PLACE FOR REUSE W/ NEW EXTERIOR CLOSURE SYSTEM - SEE STRUCT. DWGS.
D7 REMOVE PORTION OF WALL INDICATED. INSTALL LINTEL PER STRUCTURAL AS REQUIRED. SEE ARCHITECTURAL PLANS
FOR SIZE.
D8 REMOVE LANDING, STAIR, AND FOUNDATION
D9 REFER TO MECHANICAL DEMO PLAN
D10 REMOVE EXISTING MILLWORK AND ALL ASSOICATED COMPONENTS.
D11 CAREFULLY REMOVE EXISTING PARTITION AS NEEDED FOR NEW DOOR INSTALLATION. PROVIDE TEMPORARY SUPPORT
AT OPENING DURING CONSTRUCTION. REFER TO NEW WORK PLAN FOR NEW DOOR LOCATION
D12 CAREFULLY REMOVE EXISTING CONCRETE SLAB TO THE EXTENT SHOWN TO PREPARE FOR NEW WORK REFER TO NEW
WORK PLAN FOR DIMENSIONS
D13 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D14 REMOVE ALL ROOM FINISHES. REMOVE FLOOR FINISHES DOWN TO SLAB. PREPARE EXISTING SLAB TO RECEIVE NEW
FLOORING.
D15 REMOVE ELEVATOR AND ALL ASSOCIATED EQUIPMENT DOWN TO PIT
D16 REMOVE ALL CEILINGS AND BULKHEADS INCLUDING ALL ANCHORS, HANGERS, LIGHTING DEVICES, ETC.
D17 REMOVE LOCKERS
D18 REMOVE CORRIDOR WALL FINISHES, CORNER GUARDS, WALL PROTECTION FLOORING DOWN TO SLAB, BASE, AND ALL
OTHER FINISH ITEMS.
2/15/2023 17 of 233
C
D
E
F
H
E.8
C.3
G
1 94 5 876321A 1910 151411 12 13 16 17 187.66.4
A.8
B.9
5.2 11a
A.A
REMOVE EXISTING STONE CORNICE TO EXTENT REQUIRED TO INSTALL NEW
CONSTRUCTION. SEE ARCHITECTURAL NEW WORK
EXISTING SHEATHING AND JOISTS TO REMAIN. NEW OPENINGS TO BE CUT
WHERE SHOWN ON NEW WORK PLAN.
REMOVE EXISTING DORMER AND STRUCTURE TO EXTENT REQUIRED TO
INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL AND STRUCTURAL NEW
WORK
DETAIL
2/AE506
DETAIL
2/AE506
DETAIL
2/AE506
DETAIL
2/AE506
DETAIL
2/AE506
A.9
AD-130
EXISTING JOISTS AND
SHEATHING TO REMAIN.
CAREFULLY REMOVE
EXISTING LOUVER
C.6
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT NOTED ON THE DEMOLITION
PLANS.
5. THE OWNER HAS FIRST RIGHT OF REFUSAL OF ALL SALVAGE ITEMS. THE CONTRACTOR SHALL PROPERLY DISPOSE OF
ALL CONSTRUCTION DEBRIS. DO NOT STOCKPILE DEBRIS ON SITE.
6. ITEMS TO BE DEMOLISHED SHALL BE REMOVED COMPLETELY INCLUDING ALL ANCHORS, HANGERS, FASTENERS, PIPES, CONDUCTS, DUCTS, ETC. UNLESS OTHERWISE INDICATED TO BE ABANDONED IN PLACE.
7. CONC. SLAB PATCHES MUST BE FLUSH WITH REMAINING SURFACES TO PERMIT APPLICATION OF FINISHES. PROVIDE
WELDED WIRE MESH IN PATCH AREAS LARGER THAT (4) FOUR SQUARE FEET.
8. CONC. SLABS TO REMAIN SHALL BE PATCHED, SCRAPED, LEVELED, AND CLEANED TO PROVIDE SURFACE SUITABLE FOR NEW FINISHES. WHERE RENOVATED AREAS ARE RECEIVING NEW UNDERGROUND MECHANICAL, PLUMBING, ELECTRICAL, OR ADDITIONAL FOUNDATION WORK, SEE MECHANICAL, PLUMBING, ELECTRIC, AND STRUCTURAL DRAWINGS, AS WELL AS ARCHITECTURAL DRAWINGS TO DETERMINE EXTENT OF REQUIRED CUT AND PATCH OF EXISTING SLAB. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONC. SLAB DEMOLITION AND REPLACEMENT NECESSARY TO INSTALL THE NEW WORK. BACKFILL ALL BELOW GRADE DEMOLITION WORK WITH SUITABLE FILL
MEETING STRUCTURAL REQUIREMENTS FOR NEW WORK.
9. PARTITIONS SHOWN TO BE REMOVED SHALL BE CONFIRMED BY THE CONTRACTOR AS TO TYPE OF PARTITION AND EXACT LOCATION. COMPLETELY REMOVE PARTITIONS FROM FLOOR TO STRUCTURE ABOVE INCLUDING BASE, ALL FASTENERS, GROUTS, SEAL ANTS, ETC., UNLESS NOTED OTHERWISE. MASONRY PARTITIONS WHICH EXTEND THROUGH THE SLAB SHALL BE REMOVED TO 8" BELOW FINISH FLOOR. FILL SLAB OPENING WITH CONCRETE FILL TO RECEIVE FINISH FLOOR. WHERE WALLS SCHEDULED TO BE REMOVED SIT ON SLABS, GRIND SLAB TO RECEIVE FINISH FLOOR.
10. REMOVE, PATCH AND REPAIR PORTIONS OF WALL PARTITIONS WHICH CONFLICT WITH NEW WORK TO BE INSTALLED, EVEN IF NOT SPECIFICALLY NOTED TO BE DEMOLISHED ON PLANS.
11. WALLS TO BE REMOVED FROM INTERSECTING WALLS SHALL INCLUDE TOOTHED IN REPLACEMENT OF DAMAGED MASONRY ON WALL TO REMAIN AND REMOVAL OF TIES PROJECTING FROM WALLS. SEE DETAILS FOR ADDITIONAL
CONDITIONS.
12. WALLS TO BE PARTIALLY REMOVED SHALL BE TERMINATED WITH FINISHED MASONRY ENDS BY TOOTHING IN NEW MASONRY UNITS, TO MATCH ADJACENT MASONRY. SEE DETAILS FOR OTHER CONDITIONS. NO WALLS SHALL BE
TERMINATED WITH EXPOSED OPEN CELLS OR DAMAGED MASONRY UNITS.
13. WHERE NEW OPENINGS ARE SHOWN IN EXISTING WALLS, CAREFULLY REMOVE MASONRY TO NEAREST JOINT LINE WITHOUT DISTURBING ADJACENT WORK SO THAT NEW WORK CAN BE PATCHED IN TO MATCH. ALL NEW MASONRY
WORK SHALL BE TOOTHED IN.
14. ALL EXISTING STRUCTURE SHALL REMAIN, UNLESS NOTED OTHERWISE.
15. COORDINATE DEMOLITION OF ALL STRUCTURAL ITEMS (COLUMNS, BEAMS, SLABS, ET, ETC.) WITH STRUCTURAL DWGS.
EXTENT OF DEMOLITION AREA SHALL BE IN ACCORDANCE WITH STRUCTURAL REQUIREMENTS AND COORDINATED WITH
ALL NEW WORK.
16. TEMPORARILY SUPPORT ALL BEAMS, LINTELS, PORTIONS OF WALLS ETC., TO BE DISTURBED BY DEMOLITION WORK, UNTIL THEY ARE RE-SUPPORTED BY NEW WORK.
17. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE INTEGRITY OF EXISTING BUILDING ELEMENTS TO REMAIN THROUGHOUT SEQUENCE OF WORK. ANY DAMAGE TO EXISTING BUILDING CONDITIONS SHOWN TO REMAIN SHALL BE
RESTORED TO NEW WORK CONDITION AT NO ADDITIONAL COST TO THE OWNER.
18. WINDOWS SCHEDULED FOR REMOVAL SHALL BE REMOVED COMPLETELY. FASTENERS MAY BE CUT FLUSH WITH HEAD, JAMBS, AND SILLS IF THE NEW WINDOW UNIT WILL CONCEAL FASTENER. PROTECT EXISTING SILLS SCHEDULED TO REMAIN. ALL EXISTING WINDOW OPENINGS MUST BE FIELD MEASURED PRIOR TO SUBMITTAL OF SHOP DRAWINGS.
19. WERE FINISHES ARE INDICATED TO BE REMOVED, REMOVAL SHALL INCLUDE ANY GROUT, ADHESIVES, FASTENERS, AND
ALL OTHER ITEMS USED TO ATTACH THE FINISHES TO THE SURFACES THAT THEY COVER.
20. ANY FLOOR AREAS DAMAGED BY THE DEMOLITION CONTRACTOR SHALL BE PATCHED TO MATCH EXISTING.
21. WHERE CEILINGS ARE TO BE REMOVED, REMOVE ALL CEILINGS SYSTEMS COMPLETE INCLUDING GRID, TRIM HANGER, CLIPS, ETC. WHERE NEW CEILINGS ARE SPECIFIED, NO DOUBLE CEILINGS PERMITTED. REMOVE ALL ORIGINAL
CONCEALED CEILINGS WHERE ENCOUNTERED.
22. ALL EXISTING SURFACES TO REMAIN SHALL BE PROTECTED, PATCHED IF DAMAGED AND CLEANED PRIOR TO
APPLICATION OF FINISHES.
23. CONTRACTOR TO PROTECT ALL EQUIPMENT AND OTHER ELEMENTS IN AREA OF NEW OR DEMOLITION WORK.
24. REMOVE ALL CURTAINS AND BLINDS IN AREAS OF RENOVATION OR DEMOLITION, UNLESS NOTED OTHERWISE.
25. REMOVE MECHANICAL, ELECTRICAL AND PLUMBING ITEMS AS NOTED ON MECHANICAL, ELECTRICAL AND PLUMBING
PLANS. COORDINATE WITH CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, AND PLUMBING, FOR ADDITIONAL DEMOLITION NOTES. REMOVAL WORK IS INTENDED TO INCLUDE ALL ASSOCIATED ITEMS SUCH AS ELECTRICAL OUTLETS, SWITCHES, CONDUITS, CONTROLS, PIPING, MOUNTING BLOCKS, ETC., AS NOTED. THE CONTRACTOR SHALL REFER TO ALL CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING DRAWINGS AND SPECIFICATIONS FOR PROCEDURES CONCERNING RELATED TRADES IN AREAS WHICH REQUIRE DEMOLITION. REPAIR AND PATCH ANY AREAS
DAMAGED DURING REMOVAL WORK.
26. ASBESTOS CONTAINING MATERIALS (ACM) MAY BE PRESENT IN DEMOLISHED MATERIALS. CONTRACTOR TO PROVIDE TESTING AND REMEDIATE ANY MATERIAL FOUND IN SCOPE OF WORK AREA. IF ACM OR OTHER HAZARDOUS MATERIALS ARE FOUND IN PROJECT AREA AND ARE DISTURBED BY CONSTRUCTION ACTIVITY STOP WORK IMMEDIATELY AND
CONTACT THE COR FOR THE PROJECT.
GENERAL NOTES - DEMOLITION
DOOR TO BE REMOVED
CONSTRUCTION TO BE REMOVED
CONSTRUCTION TO REMAIN
DEMOLITION LEGEND
AREA NOT INCLUDED IN SCOPE
N
KEY PLAN
NEW ADDITION
A R C H I T E C T S E N G I N E E R S
CB
Drawing Number:
Project Title:
Project Location:
Issue Date
Checked By: Drawn By:
Drawing Title:
FULLY
SPRINKLERED
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
A
Submission:
ARCHITECT / ENGINEER OF RECORD:PROFESSIONAL SEAL:
Revisions: Date:
CONSULTANT:
23456789101112131415
B
C
D
E
F
G
H
I
J
123456789101112131415
/8
/4
/8
/2
/4
-1
/2
Drawing of
Architect:
CB DESIGN GROUP, INC.
421 King St., Suite 301 Alexandria, VA 22314 POC: Wes Bridges, AIA 703.772.4213
TOMAH VAMC
TOMAH, WISCONSIN
DECEMBER 15, 2022
676-325
AuthorChecker
EXPAND AND RENOVATE
B404 FOR OUTPATIENT
MENTAL HEALTH
BID SET
ATTIC FLOOR DEMO PLAN
AD-104
18 250
-3
A D
-1
/1
/2
.p d f
SCALE: 1/8" = 1'-0"AD-104
1 ATTIC FLOOR DEMO PLAN
KEYNOTES - DEMOLITION PLAN
# DESCRIPTION
D1 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D2 REMOVE PLUMBING FIXTURES AND TOILET ACCESSORIES.
D3 REMOVE FURRED WALL STRUCTURE SLAB TO DECK
D4 REMOVE EXISTING WINDOW, FRAME, SILL, SHADES, BLINDS, AND ALL ASSOCIATED HARDWARE. PREPARE FOR NEW
WINDOW INSTALLATION OR INFILL. SEE NEW WORK PLANS
D5 REMOVE DOOR(S) AND FRAME(S). (TO INCLUDE STOPS & HOLD OPENS WHERE THEY OCCUR)
D6 REMOVE EXTERIOR MASONRY WALL (BRICK & CMU), INCLUDING ALL WINDOWS, DOORS, ETC. IN AREA INDICATED. EXIST.
FOUNDATION & FOOTING TO REMAIN IN PLACE FOR REUSE W/ NEW EXTERIOR CLOSURE SYSTEM - SEE STRUCT. DWGS.
D7 REMOVE PORTION OF WALL INDICATED. INSTALL LINTEL PER STRUCTURAL AS REQUIRED. SEE ARCHITECTURAL PLANS
FOR SIZE.
D8 REMOVE LANDING, STAIR, AND FOUNDATION
D9 REFER TO MECHANICAL DEMO PLAN
D10 REMOVE EXISTING MILLWORK AND ALL ASSOICATED COMPONENTS.
D11 CAREFULLY REMOVE EXISTING PARTITION AS NEEDED FOR NEW DOOR INSTALLATION. PROVIDE TEMPORARY SUPPORT
AT OPENING DURING CONSTRUCTION. REFER TO NEW WORK PLAN FOR NEW DOOR LOCATION
D12 CAREFULLY REMOVE EXISTING CONCRETE SLAB TO THE EXTENT SHOWN TO PREPARE FOR NEW WORK REFER TO NEW
WORK PLAN FOR DIMENSIONS
D13 REMOVE EXISTING STONE BELT TO EXTENT REQUIRED TO INSTALL NEW CONSTRUCTION. SEE ARCHITECTURAL NEW
WORK
D14 REMOVE ALL ROOM FINISHES. REMOVE FLOOR FINISHES DOWN TO SLAB. PREPARE EXISTING SLAB TO RECEIVE NEW
FLOORING.
D15 REMOVE ELEVATOR AND ALL ASSOCIATED EQUIPMENT DOWN TO PIT
D16 REMOVE ALL CEILINGS AND BULKHEADS INCLUDING ALL ANCHORS, HANGERS, LIGHTING DEVICES, ETC.
D17 REMOVE LOCKERS
D18 REMOVE CORRIDOR WALL FINISHES, CORNER GUARDS, WALL PROTECTION FLOORING DOWN TO SLAB, BASE, AND ALL
OTHER FINISH ITEMS.
18 of 2332/15/2023 18 of 233
1. ALL WORK SHOWN IS EXISTING TO REMAIN UNLESS NOTED OR INDICATED AS DASHED LINES TO BE REMOVED. THE EXTENT OF DEMOLITION WORK SHALL INCLUDE ALL INCIDENTAL DEMOLITION WORK NECESSARY TO PROPERLY PROVIDE ALL NEW WORK SHOWN AND SPECIFIED, TO INCLUDE MECHANICAL, ELECTRICAL, & PLUMBING ITEMS.
2. DEMOLITION WORK SHOWN IS BASED ON EXISTING DRAWINGS AND INSPECTIONS. THE CONTRACTOR SHALL VISUALLY INSPECT ALL EXISTING CONDITIONS, AND IS RESPONSIBLE FOR PERFORMING THE INDICATED DEMOLITION WORK EVEN
IF ACTUAL CONDITIONS DIFFER FROM THESE SHOWN ON THE DRAWINGS.
3. DEMOLITION CONTRACTOR SHALL COORDINATE WITH NEW WORK SECTIONS FOR ADDITIONAL INFORMATION RELATED
TO EXTENT OF DEMOLITION.
4. REFER TO ALL OTHER DRAWINGS IN THIS SET FOR INCIDENTAL DEMOLITION WORK NOT…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .