ATTACHMENT 1 - JAMA_IV_Capability_Questionnaire Exhibit A.docx

Exhibit A – Joint Additive Manufacturing Acceptability (JAMA) IV Industry Vendor Capability Questionnaire

The JAMA project is a collaboration across the Defense Logistics Agency (DLA) Research & Development (R&D), the Office of Secretary of Defense (OSD) Research and Engineering (R&E), the National Institute of Aviation Research (NIAR), and various Military Services (MILSVCs) with the goal of expediting the adoption of Additive Manufacturing (AM) throughout the Department of Defense (DoD) supply chain. JAMA IV specifically aims to integrate industry vendors into the AM supply chain by conducting trials for AM parts procurement and manufacturing, and facilitating quality assurance (QA) testing to ensure the adoption of reliable and high-quality AM components.

Your responses to the questions in this survey may not preclude you from participating in JAMA IV, please complete the survey accurately and honestly to assist in planning for JAMA IV part production. Upon completion of the questionnaire, the findings will be summarized and released to questionnaire participants and JAMA IV stakeholders, per DLA and OSD discretion. All information provided will be made anonymous and kept confidential upon the release of any findings.

Thank you in advance for your participation.

Respondent Information

Please tell us about yourself:

Affiliated Organization:

Respondent's First and Last Name:

Respondent's Position/Title:

Contact Email:

Contact Phone Number:

DLA - Required Items

The following questions provide the JAMA IV Team information regarding your organization's status of required certifications to conduct work with the DLA.

Please indicate which of the below certifications your organization currently possesses or plans to complete before producing parts for JAMA IV:

Current Status

1 CAGE is defined as Commercial and Government Entity 2 NIST is defined as National Institute of Standards and Technology 3 SPRS is defined as Supplier Performance Risk System

Please provide your organization's US CAGE Code below or respond with "N/A" if not assigned:

(Optional) Please list estimated timelines for certifications you marked as "In-Progress/Pending":

Additional Manufacturing Readiness Levels (MRLs) Requirements

The following questions provide the JAMA IV Team with information on your organization's current MRL.

Please indicate which of the following your organization offers:

Source of Capability

The DoD has ten MRLs to assess the maturity of manufacturing readiness outlined in Table 1 below.

CUI

ATTACHMENT 1

Controlled Unclassified Information (CUI)

Table 1. MRLs

Based on the information in Table 1, which MRL most accurately describes your organization's readiness when manufacturing AM products?m MRL 6 m MRL 7 m MRL 8 m MRL 9 m MRL 10 m MRL 1 m MRL 2 m MRL 3 m MRL 4 m MRL 5

How many AM products did your organization produce for customers within the past year?

m 0 m 1-99 m 100-499 m 500+

What types of production parts does your organization currently have in distribution?

Vendor Standards, Qualifications, and Data Management Assessment

The following questions provide the JAMA IV Team information regarding your organization's industry qualifications and data management practices, including cybersecurity. Your responses to some of the questions below may not preclude your organization from participating in JAMA IV.

Please indicate which of the below standards/qualifications your organization currently possesses or is in the process of obtaining:

Current Status

(Optional) Please list any additional relevant AM quality management standards your organization has in place (including additional NADCAP certifications):

Please indicate which International Traffic in Arms Regulations (ITAR) your organization is currently compliant with (your response to this question may not preclude your organization from participating in JAMA IV):

q Management q Processes q Employee Policies q None of the above

(Optional) Please provide context for your organization's background/experience with ITAR:

Please select the supply chain security measures your organization currently has in place:

q Auditing suppliers regularly q Requiring cybersecurity checks at supplier locations q Using accredited or certified suppliers q None of the above q Other

Is your organization compliant with the Buy American Act?

m Yes m No

Does your organization currently possess a DoD Facility Clearance (FCL) (your response to this question may not preclude your organization from participating in JAMA IV)?

m Yes m No m In-Progress

Additive Manufacturing Capability Information

The following questions provide the JAMA IV Team information regarding your organization's current AM capabilities.

Please select the 3-Dimensional (3D) printing service(s) and metal(s) your organization is currently able to print:

3D Printing Service Materials

^^ 316L is defined as Austenitic Stainless Steel ^^^ CuNi is defined as Copper Nickel ^^^^ CoCr is defined as Cobalt-Chrome

* IN718 is defined as Inconel Alloy 718 ** Ti64 is defined as Titanium Alloy Ti-6Al-4V *** AlSi7Mg is defined as Aluminum Silicon 7 Magnesium alloy, also known as F357

(Optional) Please list any metal-based 3D printing services, and their applicable material printing options, not accounted for above, that your organization currently offers:

Please select the 3D printing service(s) and polymer(s) your organization is currently able to print:

3D Printing Service Engineering-Grade Materials

Aerospace-Grade Materials

Composite Capability

Chopped or Continuous

4 PEKK is defined as polyetherketoneketone 5 PEEK is defined as polyetheretherketone 6 PEI is defined as polyetherimide, also known as ULTEM

1 ABS is defined as acrylonitrile butadiene styrene 2 PLA is defined as polylactic acid 3 ASA is defined as acrylic styrene acrylonitrile

Please provide a detailed list of the machines and machine/material combinations you have qualified with customers, including the machine type and model, material type, qualification details, and customer details.

(Optional) Please list any polymer-based 3D printing services, and their applicable material printing options, not accounted for above, that your organization currently offers:

Please select the AM post-processing service(s) your organization currently offers for metals and polymers:

Post-Processing Service Source of Capability

(Optional) Please list other AM post-processing services your organization currently offers and whether they are performed in-house or outsourced:

image2.png image1.png