Attachment_0088_OMFV_Bill_of_Materials_(BOM).xlsx
XLSX spreadsheet 50 KB Posted
- Attached to
- Optionally Manned Fighting Vehicle (OMFV) Draft Request for Proposal (RFP) W56HZV-22-R-0026
- Solicitation number
- W56HZV-22-R-0026
About this file
This document contains a draft Request for Proposal (RFP) for the Optionally Manned Fighting Vehicle (OMFV) program, along with related attachments. The Army is seeking industry feedback on the draft RFP by May 2nd for the detailed design, prototype build, and test phase of the OMFV program. The draft RFP and related attachments contain both unclassified controlled information and classified information. Interested parties must submit a request for any controlled or classified documents by providing their facility security clearance information and justification for need to know. Feedback should be provided using the provided comment resolution matrix templates. The draft RFP covers requirements for the detailed design and build of OMFV prototypes, along with associated program documentation and data deliverables.
View the file
Other files
Show all 49
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Coversheet
| Attachment 0088 |
| OMFV Bill of Materials Template |
| Solicitation Number | W56HZV-22-R-0026 |
| Revision Number | 000 |
| Date | 29-Mar-2022 |
All data in this workbook is subject to the distribution statement found on "USG Attachment Coversheet"
| Distribution Statement A: Approved for public release; distribution is unlimited. |
| SECURITY NOTICE: Contractor responses to the data requirements are likely to be at the Controlled Unclassified Information (CUI) level. For security related guidance and procedures on how to mark, handle, and transmit classified information, contractors should refer to DoD 5220.22-M National Industrial Security Program Operating Manual, 28 Feb 2006, supporting DD 254, and the OMFV Security Classification Guide signed by PEO GCS on 18 February 2021. |
All CUI responses should be marked with the following CUI Designation Indicator and Distribution Statement:
Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category(ies): CTI, EXPT,SSEL Distribution Statement: E POC: name and phone number or email of POC DISTRIBUTION STATEMENT E: Distribution authorized to the Department of Defense Components only; Proprietary Information (DFARS Limited/Restricted Rights); Export Control; date of determination is 18 February 2021. Other requests for this document shall be referred to the attention of the PM MCS Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 E. 11 Mile Road, Detroit Arsenal, MI 48397-5000.
WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.
This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed -- in whole or in part -- for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of -- or in connection with -- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction. Source Selection Information -- See FAR 2.101 and 3.104.
BOM DATA FIELDS
| DATA FIELD | DEFINITION/EXPLANATORY NOTES |
| AS OF DATE | The date in which the source data used to create the report was current. |
| MANUFACTURE DATE | The date in which the componeNt, part, assembly, subassembly, etc. was manufactured. |
| WBS NUMBER | The WBS number of the lowest applicable level Product Orientated WBS element from the CSDR Plan (reference Attachment 0001) |
| WBS NAME | The name of the lowest applicable level Product Orientated WBS element from the CSDR Plan (reference Attachment 0001) |
| INDENTURE LEVEL | A number that represents the specific level of the top down structure specified on the Bill of Materials |
| ASSEMBLY LEVEL | An integer utilized to identify the parent-child hierarchical relationship for all parts included in the end item system. Utilize “1” for a highest level of assembly/part number (e.g., the prime mission product, Variant A, Variant B, bumper kit, add-on armor kit), utilize “2” to identify assemblies/part numbers which - when combined - create the highest level of assembly/part number (i.e., Assembly Level “1”). Utilize “3” to identify assemblies/part numbers which - when combined - create the part number listed in the “Parent Part Number” column (i.e., the part number at Assembly Level 2). Repeat the aforementioned pattern/methodology for assembly levels “4” and greater. |
At least one Assembly Level “1” shall be reported; multiple Assembly Level “1” may be required if multiple end items will or could be DD-250’ed to the Government (e.g., Variant A and Variant B would both have a Assembly Level “1”). NULL/missing values are not allowed.
| NEXT HIGHER ASSESMBLY (NHA) PART NUMBER (P/N) | The OEM Part Number of the referenced part’s parent (Next Higher Assembly (NHA)); the part number of the next higher assembly. | Enter “N/A” if Assembly Level is “1” and no higher level of assembly exists. If the referenced part is software or firmware then the NHA is the item the software is used on. | |
| NEXT HIGHER ASSESMBLY (NHA) NAME | The OEM Name of the referenced part’s parent (Next Higher Assembly (NHA)); the name of the next higher assembly. | ||
| NEXT HIGHER ASSESMBLY (NHA) CAGE CODE | CAGE code of the OEM of the NHA | ||
| PART NAME | The noun name assigned as the unique identifier; (nomenclature i.e. Antenna, Filter, etc); the noun name and version assigned to software (i.e. Compose 3.1.0.0, etc.) | ||
| PART NOMENCLATURE | The nomenclature the prime contractor utilizes to refer to the part. The name or designation of the referenced part | ||
| NATIONAL STOCK NUMBER (NSN) | Self-Explanatory | ||
| PART NUMBER REVISION DESIGNATOR | A unique value used to track and identify the prior, current, or proposed design associated with part number/assembly level. | NULL/missing values are allowed only if no design change has occurred during the course of the contract or the record is for GFE. | |
| PART NUMBER ALTERNATE | The OEM part number of the item the referenced part is the alternate for | Required if the referenced part is an alternate to another part in the BOM | |
| HARDWARE OR SOFTWARE ITEM | Identifies part, assembly, subassembly, component, etc. as a hardware configuration item or computer software configuration item. | ||
| SOFTWARE IDENTIFIER | Computer Software Configuration Item (CSCI) assigned a unique identifier consisting of a name and/or number. It may also uniquely identify the software when combined with the CAGE code or name of the company that developed it. A version identifier | ||
| may be used to supplement the software identifier. | Software identifiers consist of a name or other identifier and a version identifier, assigned by the developing contractor. The identifiers relate the software to its associated configuration documentation (software requirements specification, software |
design documents, object description model documents, etc.), revision and release date. The software and version identifiers are embedded within the source code, and are marked on media containing the software.
| SOFTWARE VERSION IDENTIFIER | Each Version of the Software CSCI has a version identifier supplementing the software identifier. | Software units, at and below the CSCI level might be identified using the developing contractor convention, typically the conventions of the software language in which it is written. |
| FIRMWARE IDENTIFIER | Hardware configuration items or devices containing firmware code. | Used in cases where both the hardware device and the embedded firmware code are documented and controlled via the same engineering design document (drawing) and the Part or Identifying Number (PIN) for the device with the code embedded identifies the firmware. Or in cases where the hardware device and the software to be embedded are documented and controlled separately. The device is identified by a PIN and serial number; the embedded software is identified as a software configuration item |
| PART NUMBER STATUS | e.g. Active (used if the row represents the current design), Inactive (used if the row has been superseded by a more current “Active" design), Obsolete (a special form of “Inactive" used to identify that a change in design occurred due to obsolescence rather a performance change). | The contractor is encouraged to utilize whatever values it believes will best represent the status of a row but shall provide a data dictionary of utilized terms. |
| SERIAL OR LOT NUMBER (NHA) | Uniquely identify an individual unit or specific group of units of an item (when used with the manufacturer's identifier, i.e. CAGE code, and the basis for serialization -- product-tracking base identifier) Serial and Lot numbers are unique, consecutive, and non-duplicating for a specific nomenclature or part identifier. | |
| SERIAL OR LOT NUMBER (PART) | Uniquely identify an individual unit or specific group of units of an item (when used with the manufacturer's identifier, i.e. CAGE code, and the basis for serialization -- product-tracking base identifier) Serial and Lot numbers are unique, consecutive, and non-duplicating for a specific nomenclature or part identifier. | |
| PART NUMBER (PRIME CONTRACTOR/OEM) | The part number assigned by the Original Equipment Manufacturer (OEM) or Prime Contractor. It is also the part number the prime contractor uses to identify, track, and manage the part.This may be the same as the Manufacturer’s number but more often than not it is different. Sometimes referred to the Configuration Part Number or the Drawing Number. | |
| CAGE CODE (PRIME CONTRACTOR/OEM) | Commercial and Government Entity (CAGE) code of the OEM. | |
| PART NUMBER (SUBCONTRACTOR / MANUFACTURER) | The part number the Subcontractor uses to identify a part. The part number assigned by the actual manufacturer of the referenced item. May be the same as the referenced part if the part is manufactured by the OEM. | |
| CAGE CODE (SUBCONTRACTOR / MANUFACTURER) | The CAGE code of the entity that actually manufacturers the referenced part | |
| OEM/PRIME CONTRACTOR NAME | The full legal name of the entity that is providing the referenced part to the government. Sometimes referred to as the Prime Integrator or Prime; The name of the prime contractor responsible for delivery of the end item to the Government. The name reported should match the DD 250 form that will or could be used to deliver the end item to the Government (utilize the prime contractor’s nomenclature even for GFE parts when the GFE parts will be integrated into the end item prior to delivery to the Government). NULL/missing values are not allowed. |
| OEM/PRIME CONTRACTOR ADDRESS | The physical address of the part’s OEM, including country | |
| OEM/PRIME CONTRACTOR WEBSITE | The web address of the part’s OEM, as applicable | |
| OEM/PRIME CONTRACTOR FACILITY CLEARANCE LEVEL | The level of security clearance the OEM’s facility holds | |
| MANUFACTURER/SUBCONTRACTOR NAME(S) | Full Legal name of the entity that supplied/will supply/currently supplies the part to the prime contract for additional and/or final assembly into the MCS-OMFV. Sometimes referred to as the supplier. | The name of the subcontractor/manufacturer who supplies the part to the prime contractor for additional and/or final assembly into the Assembly Level “1” end item. Enter the prime contractor’s nomenclature if produced by the prime contractor or if the level of assembly includes both prime and supplier/manufacturer provided parts/assemblies. Enter “TBD” for parts/assemblies which do not yet have a known source of supply. If multiple sources of supply are or could be utilized, report the data using one of the of the following formats: |
1) Enter “MULTIPLE:” followed by a comma delimited list of supplier/manufacturer nomenclatures. If a Supplier/Manufacturer Nomenclatures includes a comma(s), escape the comma(s) by putting a forward slash (“/”) in front of it (for example, “Joe’s Breaks, Tires, and Oil Filters” and “Jan’s Tires” would be entered as “MULTIPLE: Joe’s Breaks/, Tires/, and Oil Filters, Jan’s Tires”).
2) Duplicate the part’s record within the submission (e.g., included the same info on multiple rows except) listing each Supplier/Manufacturer Nomenclatures on its own row.
NULL/missing values are not allowed.
| MANUFACTURER/SUBCONTRACTOR DUNS | Self-Explanatory | |
| MANUFACTURER/SUBCONTRACTOR ADDRESS | The physical address of the part’s Manufacturer/Subcontractor, including country. | |
| MANUFACTURER/SUBCONTRACTOR WEBSITE | The web address of the part’s Manufacturer/Subcontractor, as applicable. | |
| MANUFACTURER/SUBCONTRACTOR FACILITY CLEARANCE LEVEL | The level of security clearance the Manufacturer/Subcontractor's facility holds. | |
| ENGINEERING CHANGE ACTIVITY | Listing of engineering changes and their implementation activities, including: the reason(s) for the changes, ECN or Engineering Change Proposal (ECP) ID, justification for the changes or reference thereto, effective date of the change, and the effectivity to which this change is applicable. | |
| DOCUMENT: NAME, NUMBER AND REVISION DESIGNATOR | Name of document, document number and the most curent revision level of the technical document (Applicable Technical Manuals and/or specifications, or drawings and their revisions, specification, etc.) that references the item. | Mark N/A for any information that does not exist. Mark TBD for any information that is in draft. |
| SAFETY CRITICAL/CRITICAL SAFETY ITEM | A listing of any item that is a CSI, SCI, or both and the Safety Hazard Severity Code IAW MIL-STD-881. | Mark any item that has been determined to be a SCI or CSI “Y”. If not, mark “N”If the part is a Critical Safety Item (CSI), Safety Critical Item (SCI),the manufacturer and manufacture date shall be included for any age or date managed life limited item. If not a CSI or age or date managed life limited item, installation date shall be provided, if available. If the installation date is not available, the Department of Defense (DD) Form 250, Material Inspection and Receiving Report, date shall be provided. (Copies of this form are available online at https://www.esd.whs.mil/Directives/forms.) |
| HARDENESS CRITICAL ITEM | Mark any item that has been determined to be a HCI “Y”. If not, mark “N” | If the part is an HCI, the manufacturer and manufacture date shall be included for any age or date managed life limited item. HCI is an item at any assembly level having performance requirements for the purpose of nuclear survivability protection. |
| HARDENESS CRITICAL ASSEMBLY | Mark any item that has been determined to be a HCI “Y”. If not, mark “N” | If the part is an HCA, the manufacturer and manufacture date shall be included for any age or date managed life limited item. HCA is an item at Assembly Level 1 having performance requirements for the purpose of nuclear survivability protection. |
| BATTERIES | Indicates whether an item contains batteries. | Required. If the referenced part contains batteries and is a subassembly, its NHA should indicate that it also contains batteries. |
| COEI/AAL/BII | Identifies if part, assembly, subassembly, component, etc. is part of an end item used as ASL, COEI or BII | |
| DISTRIBUTION STATEMENT | Specific distribution statements and export restrictions must be marked on information subject to secondary distribution limitations as prescribed by law and as indicated by the contract. Refer to DoDI 5230.24 forspecific descriptions of use. | |
| SECURITY MARKING | Security markings are required to be clearly marked on all documents, data and classified information where special handling requirements apply IAW the OMFV SCG. | |
| ASSERTED DATA RIGHTS | Identify what rights and source controls the contractor has and is asserting on the part number identified on the row. | Mark per IAW DFARS Regulations for technical data, computer software and computer software documentation. Documents which contain data for which the Government or other parties do not have unlimited rights, must be appropriately labeled to indicate the data rights limitations, so that proprietary information disclosed to the Government for specific purposes is protected. |
| QUANTITY BY ASSEMBLY-VALUE | The quantity as either an integer (e.g., 1, 2, 3) or floating point number (e.g., 1.5, 0.33) of each item at the specified level of assembly/row. NULL/missing values are not allowed. | |
| QUANTITY BY ASSEMBLY- UNIT OF MEASURE | The count of the referenced part per NHA. The basis of measurement for “Quantity by Assembly” (e.g., “EA” for each, “IN” for inch). The contractor is encouraged to utilize values found in ASME Y14.38-2007 (or latest addition). If the contractor utilizes any values not found in ASME Y14.38-2007 (or latest addition), the contractor shall provide a data dictionary of utilized terms. NULL/missing values are not allowed. | |
| UNIT WEIGHT- VALUE | An integer or floating point number which, combined with the “Unit Weight - Unit of Measure”, identifies the weight of one unit such that “Unit Weight” multiplied by “Quantity by Assembly” will equal the total weight of the part number in one complete assembly. Mark “NA” on rows which represent software. NULL/missing values are not allowed. | |
| UNIT WEIGHT-UNIT OF MEASURE | The unit of measure (e.g., “kg” for kilogram) represented in “Unit Weight”. The contractor is encouraged to utilize values found in either ASME Y14.38-2007 (or latest addition) or IEEE Standard Letter Symbols for Units of Measurement, Std 260.1-2004 (or latest addition). If the contractor utilizes any values not found in ASME Y14.38-2007 (or latest addition) or IEEE Standard Letter Symbols for Units of Measurement, Std 260.1-2004 (or latest addition), the contractor shall provide a data dictionary of utilized terms. Mark “NA” on rows which represent software. NULL/missing values are not allowed. | |
| UNIT COST SOURCE | The source of the data provided for “Unit Cost" (e.g., quote/purchase order number, estimate). | |
| UNIT PRICE | A representative sale price for the row. This value is the “Unit Cost" plus all associated loaders and overheads documented via the contractor's CAS Disclosure Statement which would prepresent the sale price which the government may pay the contractor to procure the part number identified on the row. The contractor shall identify which forward rate pricing loaders, overheads, and profit/fee were utilized to calculate the row from “Unit Cost" to “Unit Price". | |
| UNIT PRICE BASIS OF ESTIMATE | The planned procurement quantity of the item utilized when developing the unit price (e.g., if the unit price is from a supplier quote, what quantity of the part was quoted). If using a standard price accounting system, enter the average quantity used to establish the standard price and mark that the unit price is a standard price. | |
| UNIT COST REFERENCE QUANTITY | The planned procurement quantity of the item utilized when developing the unit cost (e.g., if the unit cost is from a supplier quote, what quantity of the part was quoted). If using a standard cost accounting system, enter the average quantity used to establish the standard cost. | |
| PROCUREMENT LEVEL OF ASSEMBLY | (Yes/Below/Above): “Yes" if the row represents the lowest ASSEMBLY LEVEL item which the Prime Contractor plans or assumes to fabricate, procure or supply for integration into OMFV, “Below" if the row is a component of a higher level assembly that has a distinct planned or assumed fabrication, procurement or supply action, “Above" if the row represents a collection of items whose lower level breakdown represents distinct planned or assumed fabrication, procuremetn or supply actions. | |
| UNIT PRICE BASIS OF ESTIMATE | The planned procurement quantity of the item utilized when developing the unit price (e.g., if the unit price is from a supplier quote, what quantity of the part was quoted). If using a standard price accounting system, enter the average quantity used to establish the standard price and mark that the unit price is a standard price. | |
| BUY TYPE | E.g., Commercial-Off-the-Shelf (COTS), Government-Off-The-Shelf (GOTS), modified COTS/GOTS, Developmental Item, Government Furnished Equipment, other (specific with description). For software, also indicate whether Open Source Software. For systems that include GFE, the BOM shall identify the GFE at the top indenture level. | |
| APPLICATION TO VEHICLE OR KIT | Identify if the row is associated with the primary OMFV or a kit. | |
| PROCUREMENT LEAD TIME | Identify the number of calendar days from the initiation of the procurement action for the part until delivery to the contractor. | |
| PROCUREMENT LEAD TIME SOURCE | The source of the data provided for “Procurement Lead Time" (e.g., quote/purchase order number, estimate). | |
| EXTENDED QTY | The total quantity per vehicle | |
| EXTENDED LINE ITEM COST PER VEHICLE | The contractor would multiply the extended Qty per vehicle by the unit cost to get the cost per vehicle. | |
| EXTENDED LINE ITEM PRICE PER VEHICLE | The contractor would multiply the extended Qty per vehicle by the unit price to get the cost per vehicle. | |
| OPTIONAL INFORMATION | The contractor may add additional data/fields/columns to clarify any of the required information (e.g., Pegging Assembly, Make Buy Code). The contractor is encouraged to provide a brief explanation, data dictionary, additional notes, guides, summaries for any additional data/fields/columns it includes within its submission. | |
| SPECIAL PACKAGING | Item requires Special Packaging Instructions (SPI) or a Long Life Reusable Container (LLRC). Mark as SPI or LLRC | |
| ADVANCED MANUFACTURING CANDIDATE | Mark Yes or No | |
| LONG LEAD ITEM | Items that require a longer delivery period. | |
| SHELF LIFE | The amount of time that the item is usable. | |
| SYSTEM SUPPORT PACKAGE | Mark as SSP if item is part of a System Support Package.Mark as N/A if not applicable | |
| NMWR CANDIDATES | Information regarding the National Maintenance Work Requirement (NMWR) Candidate List to develop Sustainment-Level technical publications. Mark as yes or no | |
| MAC INFORMATION | Maintenance Allocation Chart entry | |
| SPECIAL TOOLS | A list of special tools required to service the part. Mark as yes or no | |
| TECHNICAL MANUAL WORK PACKAGES | Technical Manual Work Packages related to the item. Identify related TM. Mark as N/A if not applicable. | |
| TRAINING SUPPORT PACKAGE | Mark as TSP if Training Support Packages are related to the item. Mark as N/A if not applicable | |
| PROVISIONING DATA CODE | See Provisioning Data Tab | |
| PROVISIONING DATA FIELD NAME | See Provisioning Data Tab |
PROVISIONING DATA INFO
| Data Product Title | Select Information | Additional Information | Reference DID/Attachment |
| ACQUISITION METHOD CODE (AMC) | N | Cannot used 0 (Zero) | L004 |
| ACQUISITION METHOD SUFFIX CODE | N | Cannot use O (Alpha) | L004 |
| ALLOWANCE ITEM CODE (AIC) | A | Not Mandatory for initial record build; howver, if the item is a BII, COEI, AAL, or other LSAR then populate the data. | L004 |
| ALLOWANCE ITEM QUANTITY | A | L004 | |
| DATA PROCESSING EQUIPMENT CODE | X | L004 | |
| BASIS OF ISSUE (BOI) | T/A | See GEIA-STD-0007-B or latest version for options when populating BOI in formation | L004 |
| QUANTITY AUTHORIZED (QTY‑AUTH) | T/A | L004 | |
| END ITEM | T/A | L004 | |
| LEVEL | T/A | L004 | |
| CONTROL | T/A | L004 | |
| COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE | X | Shall be the OEM cage listed not a vendor CAGE | L004 |
| CONTROLLED INVENTORY ITEM CODE | N | ALSO KNOWN AS THE Physical Security and Pilferage Code (PSPC) | L004 |
| CRITICALITY CODE | A | L004 | |
| DEMILITARIZATION CODE (DMIL) | X | L004 | |
| DOCUMENT AVAILABILITY CODE | N | L004 | |
| ESSENTIALITY CODE | X | L004 | |
| FUNCTIONAL GROUP CODE | T | L004 | |
| HARDNESS CRITICAL ITEM (HCI) | A | L004 | |
| INDENTURE CODE | X | L004 | |
| OPTION 4 | X | All parts indicated on drawing will be listed in the breakdown in proper indenture without specific identification that the parts are utilized as "attaching parts" | L004 |
| INDENTURE FOR KITS | A | L004 | |
| OPTION 1 | A | Kits shall be assigned an indenture lower than the subassembly/assembly/component/end item for which it is used. | L004 |
| ITEM NAME | X | Shall be the approved item name based on the H6 handbook | L004 |
| ITEM NUMBER | T | L004 | |
| LINE REPLACEABLE UNIT (LRU) | L | IF ITEM IS LRU THEN ENTER Y, IF NOT A LRU LEAVE BLANK | L004 |
| MAINTENANCE REPLACEMENT RATE I (MRRI) | P | L004 | |
| MAINTENANCE REPLACEMENT RATE II (MRRII) | P | L004 | |
| MAINTENANCE REPLACEMENT RATE MODIFIER (MRR MOD) | P | L004 | |
| MAINTENANCE TASK DISTRIBUTION | R | L004 | |
| FEDERAL SUPPPLY CLASSIFICATION | A | Also needed for P-Coded PLISNs without a NSN | L004 |
| NATIONAL ITEM IDENTIFICATION NUMBER | A | L004 | |
| NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE NUMBER (NHA PLISN) | X | L004 | |
| NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE NUMBER INDICATOR (NHA IND) | X | ONLY USE "N" TRUE NEXT HIGHER. | L004 |
| PRECIOUS METAL INDICATOR CODE (PMIC) | N | L004 | |
| PRODUCTION LEAD TIME (PLT) | X | L004 | |
| PROVISIONING CONTRACT CONTROL NUMBER (PCCN) | X | L004 | |
| PROVISIONING LIST CATEGORY CODE (PLCC) | A | Required if the item is documented on another list or is Govenment Furnished. See SAE GEIA STD 0007B for proper codes | L004 |
| PROVISIONING LIST ITEM SEQUENCE NUMBER (PLISN) | X | L004 | |
| PROVISIONING NOMENCLATURE | T/A | L004 | |
| PROVISIONING REMARKS | A | L004 | |
| QUANTITY PER ASSEMBLY (QPA) | X | V (variable) shall not be used. | L004 |
| OPTION 1 | X | L004 | |
| QUANTITY PER FIGURE | T | L004 | |
| QUANTITY PER UNIT PACK | N | L004 | |
| REFERENCE DESIGNATION | A | only use for a true reference designator IAW ASME Y14.44 and IEEE Std 315 | L004 |
| OPTION 1 | A | L004 | |
| REFERENCE DESIGNATION CODE (RDC) | A | L004 | |
| REFERENCE NUMBER | X | L004 | |
| REFERENCE NUMBER CATEGORY CODE (RNCC) | X | L004 | |
| REFERENCE NUMBER VARIATION CODE (RNVC) | X | L004 | |
| REPAIR CYCLE TIME | R | See attachment ? For reference | L004 |
| REPLACEMENT TASK DISTRIBUTION | X | See attachment ? For reference | L004 |
| SHELF LIFE (SL) | X | L004 | |
| SHELF LIFE ACTION CODE (SLAC) | A | L004 | |
| SOURCE, MAINTENANCE AND RECOVERABILITY (SMR) CODE | X | L004 | |
| SPECIAL MAINTENANCE ITEM CODE (SMIC) | A | L004 | |
| SPECIAL MATERIAL CONTENT CODE (SMCC) | A | L004 | |
| TECHNICAL MANUAL CHANGE NUMBER (TM CHG) | T/A | L004 | |
| TECHNICAL MANUAL INDENTURE CODE (TM IND) | T/A | L004 | |
| TECHNICAL MANUAL NUMBER | T | L004 | |
| UNIT OF ISSUE/UNIT OF MEASURE PRICE (UI/UM PRICE) | X | ONLY POPULATE FOR UNIT OF MEASURE PRICE | L004 |
| UNIT OF MEASURE (UM) | X | L004 | |
| USABLE ON CODE (UOC) | X | L004 |
Legend X = Required on all items regardless of source code.
A = As applicable based on other required driving data.
R = Required for all “P” code repairable items (4th&5th SMR not ZZ).
P = Required on all “P” SMR coded item EXCEPT for “PB” and all Source code “P” with SMR use position of D.
N = Required for “P” source coded items that will be managed by A12, AKZ, B14.
T = Required for all items that appear in RPSTL.
L = Required for items deemed to be LRU/WRA.
Note: Other codes may be assigned by the requireing authority as identified below.
Program specific selections and explanations.
image1.png
File details come from the government source that posted it. Updated .