Attachment_0055_Vehicle_Vulnerability_Data_Instructions.docx

Attachment 0055 - Vehicle Vulnerability Data Instructions Solicitation No.: W56HZV-22-R-0026

Attachment 0055 Vehicle Vulnerability Data Instructions

Solicitation No.: W56HZV-22-R-0026 Date: 29 March 2022

Distribution Statement A: Approved for public release; distribution is unlimited.

SECURITY NOTICE: Contractor responses to the data requirements below are likely to be at the Controlled Unclassified Information (CUI) level, and may be at the SECRET level. For security related guidance and procedures on how to mark, handle, and transmit classified information, contractors should refer to DoD 5220.22-M National Industrial Security Program Operating Manual, 28 Feb 2006, supporting DD 254, and the OMFV Security Classification Guide signed by PEO GCS on 18 February 2021.

All CUI responses should be marked with the following CUI Designation Indicator and Distribution Statement:

Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category(ies): CTI, EXPT Distribution Statement: D POC: name and phone number or email of POC

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD contractors; Specific Authority: DoDM 5200.01 and DoDM 5200.45, date of determination is: 26 December 2018. Other requests for this document shall be referred to the attention of the PM Maneuver Combat System (MCS) Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

SECRET responses should use the following Classification/Declassification Instruction:

Classified by: List name, position title of the Derivative classifier and office of origin Derived from: OMFV SCG, 20210218 Declassify on: YYYYMMDD (Refer to declassification column to determine the date)

Provide for vehicle submitted:

a. Component Vulnerability Data. This data must match the configuration of components and subsystems in the delivered CAD models. For each component in the vehicle the following component information is required:

i. Component description (function, interfaces, power requirements, NSN – if applicable)

ii. Location within vehicle

1. Electrical boxes

a. Materials of construction (e.g. steel, aluminum, plastic)

2. Casing material type and density, most critical dimensions

3. Casing dimensions, wall thicknesses, internal layout of subcomponents

4. Processing cards, power supplies

5. Electrical wiring:

a. Harnesses – list of included cables

b. Cable/harness overall diameters

c. Cable/harness shielding/insulation material(s) and thickness

d. Cable conductor materials

e. Routing in vehicle - interconnect/interface diagrams

6. Tubing/piping (cooling, lubrication, hydraulics, air):

a. Material types

b. Tubing Diameter

c. Tubing Wall Thickness

d. Pressures inside tubing

e. Routing in vehicle

f. For major mechanical components:

1) Material of construction

2) Dimensions

3) Details on internal subcomponents (number of barriers)

b. Fault Tree and Damage Assessment List (DAL) data. These documents should match the configuration of components and subsystems in the delivered models.

c. Top-Level vehicle design description:

i. Specifications/requirements

ii. Theory of operation

iii. Mission profile, mission description

iv. Interfaces - Communications, dismountables, other external links

v. Performance achievable per configuration provided in models

vi. Mobility - top speed, acceleration, grade performance, un-improved terrain performance, braking

vii. Communications - Data rates, bandwidth, connectivity

viii. Other Mission capabilities

d. Subsystem design descriptions

i. Specifications/requirements

ii. Component interfaces - control, power, cooling

iii. Interfaces with other subsystems - control, power, cooling

iv. Subsystem performance capabilities

v. Subsystem redundancies or isolation

e. Specific documents:

i. Architecture Descriptions/Schematics/Drawings (unless already delivered in CDRL E068)

ii. FMEA/FMECA

iii. All assembly drawings and Interface Control Documents (ICDs)

iv. Functional Analysis

v. Thermal Block Diagrams

vi. Electrical Block Diagrams

vii. Mechanical Block Diagrams

viii. Hydraulic Block Diagrams

ix. Cable Interconnect Drawings

x. Detailed, component-level mass property reports

xi. Existing component/system vulnerability test data

xii. Existing component/system performance test data image1.png image2.jpeg