Attach-10_Cost.Volume.Template_FINAL.docx

ATTACHMENT 10: W900KK-22-R-0012

SOURCE SELECTION INFORMATION – SEE FAR 2.101 AND 3.104

INSTRUCTIONS: VOLUME 3: COST VOLUME TEMPLATE

The Cost Volume must address the full program (base + options) and must include all components described herein. No page limit is specified for the Cost Proposal Workbook (Attachment 11), but the Proposal Cost Narrative (Offeror Generated document in native format) shall be limited to ten (10) pages. Information incorporated into the Cost Volume which is not related to cost will not be considered.

Full proposals requesting a procurement contract or other transaction (OT) must use this form (Attachment 10) and Attachment 11 - Cost Proposal Workbook, and include a Proposal Cost Narrative, as described in Enclosure 4 – Proposal Submission Instructions.

All pages shall be formatted for printing on 8-1/2 by 11-inch paper with 1-inch margins and font size not smaller than 11 point. Font sizes not smaller than 8 point may be used for figures, tables, and charts.

All documents must be in .pdf, .odx, .doc, or .docx formats. Submissions must be written in English.

No page limit has been specified for the Administrative and National Policy Requirements document.

Remove these instructions prior to saving and sending the document.

The Government requires that proposers use the provided Attachment 11 - Cost Workbook in the development of their cost proposals. All tabs and tables in the cost proposal workbook should be developed in an editable format with calculation formulas intact to allow traceability of the cost proposal. This cost proposal workbook must be used by the Offeror organization and all subcontractors (this does not include material suppliers). In addition to using the cost proposal workbook, the cost proposal still must include all other items required in this announcement that are not covered by the editable spreadsheet. Subcontractor cost proposal workbooks may be submitted directly to the Government by the proposed subcontractor via e-mail as specified in Section II.A of Enclosure 4- Proposal Submission Instructions. Using the provided cost proposal workbook will assist the Government in a rapid analysis of your proposed costs and, if your proposal is selected for award, speed up the negotiation and award execution process.

Costs must be traceable between the Offeror and all subawardees/consultants, as well as between the cost volume and the SOW. This includes ensuring a consistent task structure across all proposal documents. Cost information must be provided in sufficient detail to substantiate the proposed prices, and must include relevant Basis of Estimate data (See Attachment 12 - Basis of Estimate Desk Guide, and Proposal Cost Narrative instructions contained in Enclosure 4).

The Offeror is responsible for the compilation and submission of all non-proprietary subawardee cost proposals. Proposal submissions will not be considered complete until the Government has received all subawardee cost proposals.

Proprietary subawardee cost proposals may be included as part of the Cost Volume or emailed separately by the subawardee usarmy.orlando.peo-stri.list.trmc-te-st-baa@army.mil. Email messages must include “Subawardee Cost Proposal” in the subject line and identify the principal investigator, prime proposer organization and proposal title in the body of the message.

Remove the italicized directions in brackets within the template after completing the content within the identified sections.

END OF INSTRUCTIONS

ATTACHMENT 10: W900KK-22-R-0012

SOURCE SELECTION INFORMATION – SEE FAR 2.101 AND 3.104

TRMC T&E/S&T BAA Attachment 10 Instructions: page 2

[PRIME ORGANIZATION LOGO]

VOLUME 2: COST PROPOSAL

Proposal Title

Proposer Organization

Domain Number and Name

Topic Number and Name

Proposer Reference Number, if any

Address:

Telephone:

Email:

Address:

Telephone:

Email:

Place(s) of Performance

Period(s) of Performance

Months

Organization:

Organization Type:

Year 2: $ Year 3: $ Year 4: $ Total: $

Data Universal Numbering System (DUNS) number[endnoteRef:1] [1: The DUNS number is used as the contractor identification code for all Government procurement-related activities. Go to http://fedgov.dnb.com/webform/index.jsp to request a DUNS number (may take at least 1 business day). ]

Taxpayer identification number (TIN)[endnoteRef:2] [2: See https://www.irs.gov/individuals/international-taxpayers/taxpayer-identification-numbers-tin for information on requesting a TIN. Note, requests may take from 1 business day to 1 month depending on the method (online, fax, mail).]

Commercial and Government Entity (CAGE) code[endnoteRef:3] [3: A CAGE Code identifies companies doing or wishing to do business with the Federal Government. ]

Administration Office POC at Defense Contract Management Agency (DCMA)[endnoteRef:4] or Office of Naval Research (ONR)[endnoteRef:5], if known [4: https://pubapp.dcma.mil/CASD/CasdSearch.do.] [5: http://www.onr.navy.mil/Contracts-Grants/Regional-Contacts.aspx.]

Name:

Address:

Telephone:

Audit Office POC at Defense Contract Audit Agency (DCAA)[endnoteRef:6], if known [6: http://www.dcaa.mil/Home/Locator?title=Locator]

Name:

Address:

Telephone:

Date Proposal was Prepared

Proposal Validity Period (minimum 180 days)

TABLE OF CONTENTS

1. Cost Summary [Provide the following cost summaries information:

· Cost Summary by Phase:

· Provide total effort cost by phase (or by base effort and options) and by contractor fiscal year. Costs must be broken down by major cost items to include: labor costs, materials, travel, consultants, subawards, other direct charges (ODCs), indirect costs (overhead, fringe, general and administrative (G&A)), and any proposed fee for the project. Proposers are required to use Attachment 11 - : COST PROPOSAL WORKBOOK to provide the detailed cost summaries for each phase (or base effort and any proposed options) by contractor fiscal year.]

Cost Details [Provide the cost details broken down by the following. Include supporting documentation describing the method used to estimate costs:

· Phase

· Contractor fiscal year

· Month]

Direct Labor [Provide individual labor categories or persons, with associated labor hours and direct labor rates.]

Indirect Costs [Identify all indirect cost rates (Fringe Benefits, Overhead, G&A, Facilities Cost of Money, etc.) and the basis for each.]

Materials [Provide an itemized list of all proposed materials including quantities, unit prices, proposed vendors (if known), and the basis of estimate (e.g., quotes, prior purchases, catalog price lists, etc.). Any item that exceeds $5,000 must be supported with back-up documentation such as a copy of catalog price lists or quotes prior to purchase.]

Equipment Purchases [Provide an itemized list of all proposed equipment including quantities, unit prices, proposed vendors (if known), and the basis of estimate (e.g., quotes, prior purchases, catalog price lists, etc.). Any item that exceeds $5,000 must be supported with back-up documentation such as a copy of catalog price lists or quotes prior to purchase. Include any requests for Government-furnished equipment or information with cost estimates and delivery dates.]

Travel [Provide the purpose of the trip, number of trips, number of days per trip, departure and arrival destinations, number of people, etc.]

Other Direct Costs (ODCs) [Provide an itemized breakdown with costs. Backup documentation must be submitted to support proposed costs. An explanation of any estimating factors, including their derivation and application, must be provided.]

Cost Sharing [Provide the source, nature, and amount of any industry cost-sharing.]

Consultant Costs [Provide a copy of all consultants’ proposed SOWs as well as signed consultant agreements or other documents which verify the proposed loaded daily / hourly rate, hours and any other proposed consultant costs (e.g., travel).]

Subawardee Costs [For each proposed subawardee, provide the information requested above in Sections 1-7. All documentation must be prepared at the same level of detail as that required of the prime proposer.

Provide the following for all proposed subawardees, as applicable:

· A copy of the proposed SOW as well as any documents which verify the proposed loaded daily / hourly rate, hours and any other proposed costs (e.g., travel).

· Interdivisional work transfer agreements or evidence of similar arrangements.

· A cost or price reasonableness analysis of proposed subawardee prices as defined in FAR 15.404-3. Such analysis shall indicate the extent to which the prime contractor has negotiated subcontract prices.]

Rate Agreements [Provide any available approved rate information or other documentation that may assist in expediting negotiations (e.g., Forward Pricing Rate Agreementor Office of Naval Research (ONR) rate agreements).

Requirements for proposers requesting a procurement contract [Provide the following information where applicable. Note: this information is not required if requesting an award instrument other than a procurement contract.]

1. Proposals for $2,000,000 or more (inclusive of all options) [If applicable per FAR 15.403-4 (Class Deviation 2018-O0015), provide “certified cost or pricing data” (as defined in FAR 2.101). If applicable per FAR 52.230-2 (Class Deviation 2018-O0015), provide a Cost Accounting Standards (CAS) Disclosure Statement as required by 48 CFR 9903.202.

*In accordance with Class Deviation 2018-O0009, the list of exceptions to certified cost or pricing data requirements at Federal Acquisition Regulation (FAR) 15.403-1(b) is expanded to include contracts, subcontracts, or modifications of contracts or subcontracts valued at less than $7.5 million awarded to a small business concern or nontraditional defense contractor pursuant to-

(1) A technical, merit-based selection procedure, such as a broad agency announcement (see FAR 35.016(b)(2))]

1. Proposals for $750,000 or more (inclusive of all options) [Applicable proposals that (1) include subawardees and (2) are not exempt per FAR 19.702(b) must include a subcontracting plan pursuant to Section 8(d) of the Small Business Act (15 U.S.C. § 637(d)) and FAR 19.702(a)(1). The plan format is outlined in FAR 19.704.]

1. Proposals for a cost-type contract [Proposers who do not have a cost accounting system that has been deemed adequate for determining accurate costs must provide the DCAA Pre-award Accounting System Adequacy Checklist in order to facilitate DCAA’s completion of Standard Form (SF) 1408. The checklist may be found at: http://www.dcaa.mil/Home/Preaward ]

Requirements for proposers requesting an Other Transaction for Prototypes [Provide the following information where applicable.

Proposers must indicate whether they qualify as a nontraditional Defense contractor,[endnoteRef:7] have teamed with a nontraditional Defense contractor, or are providing a one-third cost share for this effort. Provide information to support the claims. [7: For definitions and information on Other Transaction agreements see http://www.darpa.mil/work-with-us/contract-management#OtherTransactions.]

Provide a detailed list of milestones including: description, completion criteria, due date, and payment/funding schedule (to include, if cost share is proposed, contractor and Government share amounts). Milestones must relate directly to accomplishment of technical metrics as defined in the solicitation and/or the proposal. While agreement type (fixed price or expenditure based) will be subject to negotiation, the use of fixed price milestones with a payment/funding schedule is preferred. Proprietary information must not be included as part of the milestones.] TRMC T&E/S&T BAA Attachment 10: page 5