23B0405B (SDs)_Part9.pdf

CUI // FEDCON

ATTACHMENT-J-1502000-07-004-002-01-04

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

Tsutomu.Toriyama.JA Rectangle

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

HISTORICAL RESULT OF ANALYSYS OF DEBRIS AT CABLE DITCHES FOR POWER RECEIVING OF LAND CRANES LC-47 & 48 AT YSK-B12

REPLACE THE EXISTING ELECTRIC POWER CABLES (FEEDER LINE CABLES) FOR LC47 AND LC 48

AT YSK-B12 WITH NEW ONES.

1. PREPARATION WORK:

a. The SRF Crane office (Government) will move the LC47 and LC48 at the designated place that is available to perform the replacement work.

b. The Utility (Government) will shut off power supply to LC47 and LC48 at XFMR stations before starting the replacement work, and turn on power supply to LC47 and LC48 at XFMR stations after completion of the replacement work.

c. The Contractor shall turn off VCBs at LC47 & LC48 in electrical room under the presence of SRF Crane office (Government) and turn on VCBs at LC47 & LC48 in electrical room under the presence of SRF Crane office (Government).

d. The Contractor shall perform insulation resistance test (1,000V) from XFMR stations to VCBs at electrical rooms in LC47 and LC48 before starting replacement work.

2. REPLACEMENT WORK:

a. LC47:

(1) Disconnect feeder cables at "T-F-BERTH-12 CRANE". (VCB "52F1).

(2) Pit cover shall be removed and restored by crane operation for cable replacement.

(3) Replace the existing electric power cable (IE-38sq, Approx. 155m) from XFMR station (T-F-

BERTH12 CRANE) to cable pit joint with new one.

(4) Replace the existing 6.6KV electric power cable (CET-38sq, Approx. 155m) from XFMR station (T-F-

BERTH12 CRANE) to cable pit joint with new one.

(5) Replace the existing 6.6KV flat type electric power cable (4C-38sq, Approx. 180m) from cable pit joint to cable reel.

(6) Replace the existing electric power cable (IE-100sq, Approx. 40m) from cable reel to electric RM.

(7) Replace the existing 6.6KV electric power cable (CET-38sq, Approx. 50m) from cable reel to electric

RM.

(8) Splice feeder cables and execute cable termination between "T-F-BERTH-12 CRANE" and cable connection pit.

(9) Splice feeder cables (Round - Flat) by straight connection in cable pit joint.

(10) Splice feeder cables and execute cable termination between cable reel and VCB in electrical room at

LC.

(11) Perform insulation resistance test (1,000V), and withstand voltage test (20,700V,10 minutes).

(12) Power supply will be restored for LC#47 system.

b. LC48:

(1) Disconnect feeder cables at "T-F-BERTH-12 CRANE". (VCB "52F2).

CUI // FEDCON

ATTACHMENT J-1502000-07-004-002-01-05

REFELENCE INITIAL REPLACEMENT REQUIREMENT AND PLAN FOR LC-47 & 48 AT YSK-B12

(2) Pit cover shall be removed and restored by crane operation for cable replacement.

(3) Replace the existing electric power cable (IE-38sq, Approx. 152m) from XFMR station (T-F- BERTH12 CRANE) to cable pit joint with new one.

(4) Replace the existing 6.6KV electric power cable (CET-38sq, Approx. 152m) from XFMR station (T-F-

BERTH12 CRANE) to cable pit joint with new one.

(5) Replace the existing 6.6KV flat type electric power cable (4C-38sq, Approx. 180m) from cable pit joint to cable reel.

(6) Replace the existing electric power cable (IE-100sq, Approx. 40m) from cable reel to electric RM.

(7) Replace the existing 6.6KV electric power cable (CET-38sq, Approx. 50m) from cable reel to electric

RM.

(8) Splice feeder cables and execute cable termination between "T-F-BERTH-12 CRANE" and cable connection pit.

(9) Splice feeder cables (Round - Flat) by straight connection in cable pit joint.

(10) Splice feeder cables and execute cable termination between cable reel and VCB in electrical room at

LC.

(11) Perform insulation resistance test (1,000V), and withstand voltage test (20,700V, 10 minutes).

(12) Power supply will be restored for LC#48 system.

c. Perform the following but not limited to test to ensure the LC47 and LC48 electric power receiving system are fully operational condition after completion of the replacement work.

(1) Perform insulation resistance test (1,000V), and withstand voltage test (20,700V / continuous 10 minutes).

(2) Perform insulation resistance test (1,000V) for new electric power cables from XFMR stations to VCBs at electrical room at LC47 and LC48.

(3) Perform total operation test and make necessary adjustment.

Note:

1) The following but not limited to relating work to perform the replacement work is including the Contractor’s work

• Disconnecting / connecting feeder cables from / to XFMR stations.

• Removing / restoring pit covers by crane.

• Splicing feeder cables and execute cable termination between XFMR stations and cable connection pit.

• Splicing feeder cables (Round - Flat) by straight connection in cable pit joint.

• Splicing feeder cables and execute cable termination between cable reel and VCB at electrical rooms in

LC47 and LC48.

• Painting at necessary portions.

• The tightness torque for the bolts, nuts and screws shall be in accordance with OEM standard value.

2) New electric power cables shall be generous length.

3. GENERAL INFORMATION:

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-004-002-01-05

a. The initial replacement work shall be completed within the Base Period.

b. During carrier is stay at Berth 12, the inspecting and replacement work for the LC47 and LC48 at the sites may not be allowed.

c. The Contractor’s onsite work schedule shall be approved by SRF (Government), Utility (Government) and other relating Activities (Government). The Contractor shall be changed the onsite work in accordance with the Government requirement.

d. Using LC47 and LC48 and supporting the Contractor’s work is not allowed. So the Contractor shall provide crane to lift the pit covers for the cable replacement work and shall provide scaffolding and/or aerial lift to replace the cables from the cable reel to the electrical room.

e. The contractor shall provide any tools and equipment to perform the replacement work.

ATTACHMENT J-1502000-07-004-002-01-05

New flat cable (38sq):

Joint pit to LC cable reel

Cable splicing portion between feeder cable and flat cable

Underground conduit route to B.5217 SW St.

BLDG 5217-SWITCH ST.

"T-F-BERTH-12 CRANE"

Cable Joint Pit Cable Pit under Panzer-belt Sys.

Land Crane #47 & 48

Cable Joint Pit (Enlarged View)

EXST Feeder Line System:

Cable Joint Pit

Land Crane #47

(YOKOZUNA)

Land Crane #48

(OZEKI)

Cable Pit under Panzer-belt Sys.

Cable Pit under Panzer-belt Sys.

UG conduit route.

BLDG 5217-SWITCH ST.

"T-F-BERTH-12 CRANE"

LEGEND:

Feeder Cable to be replaced

Flat Cable to be replaced

UG conduits route (Reuse)

Cable Pit w/ cable rack

Access Hatch

Cable Joint Pit

BLDG 5217-SWITCH ST.

"T-F-BERTH-12 CRANE"

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-004-002-01-05

Cable Route:

LC 47 Line:

B.5217 SW ST (VCB 52F1) - Cable Joint Pit - Cable Pit under Panzer-belt - Slip Ring at Cable Reel - VCB in Elec. RM at LC47 LC 48 Line:

B.5217 SW ST (VCB 52F2) - Cable Joint Pit - Cable Pit under Panzer-belt - Slip Ring at Cable Reel - VCB in Elec. RM at LC48

Cable connection point in Joint Pit

CET 140m 38sq

CET 140m 38sq

Straight joint connection

Straight joint connection

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-004-002-01-05

ATTACHMENT J-1502000-07-004-002-01-05

ATTACHMENT-J-1502000-005-001-01-01

SITE PLAN FOR LED MASAGE BOARD SYSTEM AT YSK-1292 (Sullivan School)

出力コントロールモジュール フルカラー（16,777ｋ色）コントロール

電光表示部寸法 1600-1120ｍｍ

内部メモリ 4GB（MAX)

データ受渡し方式 RJ45（LAN）・USB

表示能力 W＝366ﾄﾞｯﾄ H=224ﾄﾞｯﾄ

片面消費電力 1925W（最大） 1155W（平均）

製品名 屋外用フルカラーLEDモジュール（SMD)

輝度 7000 Nits

1パネル外径寸法 320-160ｍｍ

視野角 H:160°/V:120°

1パネル消費電力 55W（最大） 31W（平均）

使用可能温度 -20℃～50℃

パネル外装材料 PC

LEDピッチ 5ｍｍ

保護等級 前面IP65 後面IP44

LEDパネル

コントロールモジュール

製品仕様

表示モード 固定・点滅・反転・スクロールなど約40種

スケジュール機能 年・月・日・時・分・秒 曜日などの指定可能

表示文字 PCに依存

フォント PCに依存

テキスト登録数 内部メモリに依存

グラフィック BMP・JPEG・GIF・SWFその他合計15種類

輝度調節 ソフトウエアより調節可能(オプションで自動輝度調節追加可能）

動作OS Windows7 32bit

単相AC200V

.9イ

ン チ

行灯用LED DC12V 2.7Wｘ20ｘ2面＝108W

入力電源

両面消費電力 3850W（最大） 2310W（平均）

総消費電力 3958W（最大） 2418W（平均）

外板SUS1 .2未研

指定色塗装

本体骨 SUS 2B □50-2 .0

行灯押縁式 内照LED

行灯面板 インクジェット（両面）

A3=1/20

既 存

パ イ

プ 再

使 用

空気穴片側面2箇所（両面）

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-001-01-02

INVENTORY FOR LED MASAGE BOARD SYSTEM AT YSK-1292 (Sullivan School)

Main Sub1Sub2Sub3Sub4

150W(12V)

350W(5V)

LAN

USB

350W(5V)

350W(5V)

350W(5V)

350W(5V)

350W(5V)

350W(5V)

AC

350W(5V)

350W(5V)

350W(5V)

350W(5V)

350W(5V)

350W(5V)

350W(5V)

A面へ

A面へ

Sub4へ Sub3へ Sub2へ Sub1へ Mainへ

DC電源線 ５，１２V

映像制御線

16Cフラットケーブル

2C

映像制御線・設定線

LAN （CAT5）

映像入力線

USB

AC電源線+アース

VVF-2C+IV

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-001-01-02

Mainboard

USB

LAN

Subboard 1 Subboard 2 Subboard 3 Subboard 4

(Picture/Control/Set Up)

(Picture)

(Picture/Control)(Picture/Control) (Picture/Control) (Picture/Control) (Picture/Control)

LED Module

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-001-01-02

ATTACHMENT J-1502000-07-005-001-01-03

REFERENCE PM REQUIREMENT FOR LED MASAGE BOARD SYSTEM AT YSK-1292 (Sullivan School)

1. LED Massage Board System

(1) Annual PM Work: PM work shall be performed in accordance with OEM maintenance check sheet and manuals.

(a) Replace the existing USB & LAN cables and other consumption parts with new ones.

(b) Check LED indicators of display.

(c) Check main system.

(d) Check electric source.

(e) Check programing software.

(2) Five (5) Years Scheduled Repair Work:

Base Period

(2024th) 1st Option

Period (2025th)

2nd Option Period

(2026th)

3rd Option Period

(2027th)

4th Option Period

(2028th) N/A N/A N/A X N/A

(a) Replace the following parts with new ones.

Parts Name QTY

1. LED Panels on both side with control device and Information reproduction apparatus

2 EA

2. Upper Sign board LED with power supply 1 EA

3. Signal devices, power supplies, HUB and others 1 LS

(b) Perform operation test and make necessary adjustment after completion of all work to make sure the system is fully functional.

ATTACHMENT-J-1502000-005-002-01-01

SITE PLAN FOR ELECTRIC CARD LOCK SYSTEM AT YSK-1901 (Kinnick High School)

Category No Product Name Product Number QTY Unit VingCard Key System PC DELL OPTIPLEX 1 pcs Vison Software 470001 1 pcs

2 RFID Encoder RFID Encoder 681001030 1 pcs 3 Lock Link (Service Terminal) Lock Link (Service Terminal) 4821915 1 pcs

HW-1 Cardlock Classic RFID 482777151AFR 3 pcs HW-1 Exit Device (Rim) 8800 Exit Rim Device 3 pcs

HW-2, HW-3 5 Cardlock Classic RFID Cardlock Classic RFID CLA3519 36 pcs HW-4 Remote Controller 4826120 3 pcs HW-4 Exit Device (Rod) 8900 Mortise Lock Exit Device 3 pcs HW-4 Electric Strike 7100 Electric Strike 3 pcs HW-4 Timer SSC-7361 3 pcs

System

Cardlock

VingCard Key System PC and Vison Software 1

Cardlock Classic RFID & Exit Device

Remote Controller & Exit Device with Electric Strike & Timer6

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-01-02

INVENTORY FOR ELECTRIC CARD LOCK SYSTEM AT YSK-1901 (Kinnick High School)

Yokosuka Base Kinnick High School Front System Framework

Red：AAHJ Vision VCe Provide

■System Information PC： DELL Optiplex OS： Windows 7

Software： Vision 6.3 SR1

Front

LAN Cable(TCP/IP) USB Cable

Locklink

PDA

RFID Encoder

Server PC

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-01-02

INVENTORY FOR ELECTRIC CARD LOCK SYSTEM AT YSK-1901 (Kinnick High School)

システム保守作業一覧表 System Maintenance List

■システム機器

1. カード発行機 Card Encoder

内容： フロントに設置されている1台のカード発行機について、クリーニングを実施。その他、発行機能の確認、配線に問題ないか確認。

Content: We clean 1 pc Card Encoder in Front. We also check the function of Card Encoder and check wiring and power plug connection.

2. PC

内容： PCの各端子が正常に接続されているか確認。PCの背面に溜まる塵や埃の掃除

Content: We check the PC's cable connection. We clean PC remobing dust in the back and inside of PC

3. PDA

内容： PDAの各機能が正常に使えることを確認。(データー登録、イベント読み出し)

Content: We check the function of PDA (Install room data, Reading Event data)

4. BATTERY OF DOOR LOCK CYLINDERS BY EACH DOOR

内容： 各扉のバッテリーの交換

Content: Replace batteries of door lock cylinders by each door

■作業内容

No

①

②

③

④

⑤

⑥

⑦

■チェックリスト

No ① ② ③ ④ ⑤ ⑥ ⑦

01 Encoder

02 Encoder

03 Encoder

04 Encoder

01 PC

02 PC

03 PC

04 PC

01 PDA

02 PDA

Sign

充電機能確認 Batetery Charge function check

その他 Others

Remarks

作業内容 ( Work Contents )

クリーニング Cleaning

カード発行確認 Card Issue Function test

カードベリファイ確認 Card Veryfy Function test

配線、電源確認 Wirng and power plug connection check

3 PDA

部屋番号登録機能確認 Install room data function check

対象機器 Equipment

カード発行機

Card Encoder

2 PC

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-01-03

REFERENCE PM REQUIREMENT FOR ELECTRIC CARD LOCK SYSTEM AT YSK-1901 (Kinnick High School)

ATTACHMENT J-1502000-07-005-002-02-01

SITE PLAN FOR LED MASAGE BOARD SYSTEM AT YSK-1901 (Kinnick High School)

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-02-03

INVENTORY FOR LED MASAGE BOARD SYSTEM AT YSK-1901 (Kinnick High School)

Main Sub1Sub2Sub3Sub4

350W(5V)x5

光度センサー光度センサー

L A N

U S

B AC

DC電源線 ５，１２V

映像制御線

16Cフラットケーブル

2C

映像制御線・設定線

LAN （CAT5）

映像入力線

USB

光度センサーケーブル

専用線

AC電源線+アース

VVF-2C+IV

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-02-03

Mainboard

USB

LAN

Subboard 1 Subboard 2 Subboard 3 Subboard 4

(Picture/Control/Set Up)

(Picture)

(Picture/Control)(Picture/Control) (Picture/Control) (Picture/Control) (Picture/Control)

LED Module

LUMINOUS INTENITY

SENSOR

COMPORNENT EQUIPMENT OF LED MASSAGE BOARD

CUI // FEDCON

CUI // FEDCON

ATTACHMENT J-1502000-07-005-002-02-03

ATTACHMENT J-1502000-07-005-002-02-03

REFERENCE PM REQUIREMENT FOR LED MASAGE BOARD SYSTEM AT YSK-1901 (Kinnick High School)

1. LED Massage Board System

(1) Annual PM Work: PM work shall be performed in accordance with OEM maintenance check sheet and manuals.

(a) Replace the existing USB & LAN cables and other consumption parts with new ones.

(b) Check LED indicators of display.

(c) Check main system.

(d) Check electric source.

(e) Check programing software.

(2) Five (5) Years Scheduled Repair Work:

Base Period

(2024th) 1st Option

Period (2025th)

2nd Option Period

(2026th)

3rd Option Period

(2027th)

4th Option Period

(2028th) N/A N/A N/A N/A X

(a) Replace the following parts with new ones.

Parts Name QTY

1. LED Panels on both side with control device and Information reproduction apparatus

1 EA

2. Upper Sign board LED with power supply 1 EA

3. Signal devices, power supplies, HUB and others 1 LS

(b) Perform operation test and make necessary adjustment after completion of all work to make sure the system is fully functional.

ATTACHMENT-J-1502000-07-005-003-01-01

SITE PLAN FOR SECURITY CAMERA SYSTEM AT IKE-774

ATTACHMENT J-1502000-07-005-003-01-01

INVENTORY FOR SECURITY CAMERA SYSTEM AT IKE-774

The system was provided by TOA Co., Ltd

Name Description Model No. QTY Digital Recorder Four (4) Channels, ITB C-DV044-10 1 Liquid Crystal Monitor 19 Inches C-LC194 1 Exterior Fixed Camera Day and Night Use C-CV460D-3 3 Fixed indoor camera Indoor fixed mini dome IP

Camera H3S1P1 14

Main Cabinet 1

ATTACHMENT J-1502000-07-005-003-01-03

REFERENCE PM REQUIREMENT FOR SECURITY CAMERA SYSTEM AT IKE-774

The Contractor shall perform PM work in accordance with OEM maintenance procedure.

Note:

1) The following requirement is outline scope of work.

2) So the Contractor shall provide extremely detailed PM work to keep the security camera system is fully operational and functional.

1. SEMIANNUAL PM WORK:

a. Maintain image of camera for color, distortion and noise.

b. Maintain connecting and conduction for communication wirings.

c. Maintain setting, log and accumulate image data for digital recorder.

d. Maintain lens, angle of view, iris, focus and noise for cameras.

e. Clean for the equipment.

ATTACHMENT-J-1502000-005-004-01-01

SITE PLAN FOR SECURITY CAMERA SYSTEM AT IKE-824S

ATTACHMENT J-1502000-07-005-004-01-02

INVENTORY FOR SECURITY CAMERA SYSTEM AT OKE-824S

The system was provided by Tsuushin Setsubi Co., Ltd

Name Model No. OEM QTY Network Dome Type Camera With Ceiling Mounted Fixture

NCC2230D2 TOA Co., Ltd. 1

ITV Main System Cabinet Rack CR-413 TOA Co., Ltd. 1 Note Type PC dv7-7000/CT Hewlett-Packard (HP) 1 Sliding Rack EIA-D1 Aurora Co., Ltd. 1 Network Digital Recorder

(500CB)

Visor-2004Pro/50 R.O.D Co., Ltd. 1

PoE Switch Five (5) Ports PN27059-M TOA Co., Ltd. 1 Rack Panel R-HP042B TOA Co., Ltd. 1 Alarm Input Unit C-AL80 TOA Co., Ltd. 1 Main Power Panel PD-1130 TOA Co., Ltd. 1 Blank Panel 3U BK-033B TOA Co., Ltd. 3 Blank Panel 2U BK-023B TOA Co., Ltd. 2 Blank Panel 1U BK-013B TOA Co., Ltd. 1 Vent Panel PF-013B TOA Co., Ltd. 2 Rack Mount Fixture MB-23B TOA Co., Ltd. 1

ATTACHMENT J-1502000-07-005-004-01-03

REFERENCE PM REQUIREMENT FOR SECURITY CAMERA SYSTEM AT IKE-824S

Note:

1) The following requirement is outline scope of work.

2) So the Contractor shall provide extremely detailed PM work to keep the security camera system is fully operational and functional.

1. SEMIANNUAL PM WORK:

a. Maintain image of camera for color, distortion and noise.

b. Maintain connecting and conduction for communication wirings.

c. Maintain setting, log and accumulate image data for digital recorder.

d. Maintain lens, angle of view, iris, focus and noise for cameras.

e. Clean for the equipment.

ATTACHMENT-J-1502000-005-004-02-01

SITE PLAN FOR PA SYSTEM AT IKE-824S

ATTACHMENT J-1502000-07-005-004-02-02

INVENTORY FOR PA SYSTEM AT IKE-824S

System Name Equipment Name QTY Model No. OEM Emergency/Business PA System

Amplifire (AMP) 1 FS-971 TOA Co., Ltd.

Cabinet Rack 1 CR-413 Power AMP Panel (360W) 2 PA-3630 Pre-AMP Panel 1 PP-025C Operation Panel (10 Channel) 1 EP-0510 Extension Panel (10 Channel) 1 EP-029-10 Digital Announce Machine for Record / Reconstruction 1 EV-350R AM / FM Radio Tuner 1 DT-930 CD Player 1 CD-50 Emergency Power Panel 2 DS-290 Ni-Cd Battery 4 NDC-2460 IP Income Multi I / F Unit 1 N-8000MI Contactor I / F Unit 1 Emergency Business Junction Panel (10 Channel) 1 JP-0410 Extension Junction Panel (10 Channel) 1 JP-039-10 Blower Unit 1 BU-412 Vent Panel 1U 5 PF-013B Vent Panel 2U 1 PF-023B Rack Mount Fixture 1 MB-15B Ceiling Speaker 238 CM-2330 Ceiling Mount Speaker 238 CP-237 Wooden Wall Mounted Speaker (3W) 23 BZ-32Z Wide Phone Speaker (15W) 13 CS-153 Wide Phone Speaker (6W) 4 CS-63 Bulb Guard 4 R-SGC63 Attenuator (Under 6W) 89 AT-063 Remote Mike (20 Channel) 1 RM-1200

ATTACHMENT J-1502000-07-005-004-02-02

INVENTORY FOR PA SYSTEM AT IKE-824S

Sound System Rack Type Sound AMP 1 TOA Co., Ltd.

Cabinet Rack 41U 1 CR-413 Multi-channel Monitor 1 MP-1216 Diversity Wireless Tuner 1 WT-1824 Diversity Wireless Tuner Unit 2 WTU-1830 Wireless Antenna Mixing Distributor 1 WD-1810 Remote Console Unit 1 D-2012C CD Player 1 CD-50 Exterior Input Panel 1 Digital Mixing Processor Unit 1 D-2008SP Mike / Line Input Module 3 D-2000ADI Line Output Module 1 D-2000DAI Interface 1 PN28160-M Rack Panel 2U 1 R-HP022A-S Digital Power AMP 1 DA-250D Main Power Panel 1 PD-1130 Terminal Board Panel 1 R-JB032B Blank Panel 3U 2 BK-033B Blank Panel 2U 2 BK-023B Vent Panel 1U 6 PF-013B Vent Panel 2U 1 PF-023B Rack Mount Fixture 2 MB-15 Line Array Speaker 2 SR-T5 Wall Mounted Wireless Antenna 7 YW-550 Bulb Guard 7 R-SGYW550 Canon Type Floor Plug Receptacle Box 1 FX-1-32CF Plug Receptacle for Mike 1 YM-3CF Aluminum Plate 2 YP-1AF

ATTACHMENT J-1502000-07-005-004-02-03

REFERENCE PM REQUIREMENT FOR PA SYSTEM AT IKE-824S

1. PA Systems:

(1) Semiannual PM Work:

(a) The Contractor shall perform signal transfer system from existing fire alarm control panel and shall confirm automatic activation function of amplifier

ATTACHMENT-J-1502000-07-005-004-03-01 / 07-005-004-04-01

SITE PLAN FOR ELECTRIC CLOCK SYSTEM / EMERGENCY CALLING SYSTEM AT IKE-824S

ATTACHMENT J-1502000-07-005-004-03-02

INVENTORY FOR ELECTRIC CLOCK SYSTEM AT IKE-824S

Electric Clock System Master Clock (Cabinet Type) 1 PT-62T Citizen TIC Co., Ltd.

Slave Clock (Wall Mounted Type) 98 JA024158-4 Slave Clock (Water Proof & Wall Mounted Type) 2 JD70-BCAKT-X Long Wave Antenna (Wall Mounted Type) 1

ATTACHMENT J-1502000-07-005-004-03-03

REFERENCE PM REQUIREMENT FOR ELECTRIC CLOCK SYSTEM AT IKE-824S

PM shall be performed in accordance with OEM maintenance manual.

1. Electric Clock Systems

(1) Semiannual PM Work:

ATTACHMENT J-1502000-07-005-004-04-02

INVENTORY FOR EMERGENCY CALLING SYSTEM AT IKE-824S

Emergency Calling System Indicator for Calling (3 Windows Indication) 1 CBN-3C-D I-Phone Co., Ltd.

Indicator for Calling (25 Windows Indication) 1 CBN-25C-D Button at Bath RM (Wall Mounted Type) 18 NBR-7W Button at Freezer RM (-20℃) 2 VOSI-A-EB Emergency Lamp at Corridor 17 CBR-4 Emergency Lamp at Corridor for Freezer RM (Lock Type) 2 CBR-4$14 Restoration Button 17 NBR-2A-C Parent Interphone 1 AT-216 Child Interphone 1 AT-306 Interphone Income Fixture 89 YC-280 Interphone Income Exchanger 7 N-8000EX PoE Switch (8 Port) 2 PN27089K-M Rack Mount Fixture 2 PN71051 Interphone Income Multi I / F Unit 1 N-8000MI

005-002-01-03-CARD-PM

005-005-07-03-ECO-PM

07-006-004-GENE-YSK-4402

014_J_01Definition_1502