16-Maximum Allowable Concentrations.pdf

Revised: August 27, 2012

Summary of

Maximum Allowable Concentrations of Chemical Constituents In Uncontaminated Soil Used as Fill Material

At Regulated Fill Operations (35 Ill. Adm. Code 1100.Subpart F)

Chemical Name Maximum Allowable Concentration a

Acenaphthene 570b mg/kg

Acetone 25b mg/kg

Alachlor 0.04b mg/kg

Aldicarb 0.013b,l mg/kg

Aldrin 0.94c mg/kg

Anthracene 12,000b mg/kg

Antimony 5d,m mg/kg

Arsenic:

within a MSA county 13.0e mg/kg within a non-MSA county 11.3e mg/kg

Atrazine 0.066b mg/kg

Barium 1,500d,m mg/kg

Benzene 0.03b mg/kg

Benzo(a)anthracene:

within Chicago corporate limits 1.1f mg/kg within a populated area in a MSA excluding Chicago 1.8f mg/kg within a populated area in a non-MSA county or outside a populated area 0.9g mg/kg

Benzo(b)fluoranthene:

within Chicago corporate limits 1.5f mg/kg within a populated area in a MSA excluding Chicago 2.1f mg/kg within a populated area in a non-MSA county or outside a populated area 0.9g mg/kg

Benzo(k)fluoranthene 9g mg/kg

Benzoic Acid 400d mg/kg

Benzo(a)pyrene:

within Chicago corporate limits 1.3f mg/kg within a populated area in a MSA excluding Chicago 2.1f mg/kg within a populated area in a non-MSA county 0.98f mg/kg outside a populated area 0.09g mg/kg

Beryllium 22d,m mg/kg

Bis(2-chloroethyl)ether 0.66c mg/kg

Bis(2-ethylhexyl)phthalate 46g mg/kg

Boron 40h,m mg/kg

Bromodichloromethane (Dichlorobromomethane) 0.6b mg/kg

Bromoform 0.8b mg/kg

Butanol 17b mg/kg

Butyl benzyl phthalate 930i mg/kg

Cadmium 5.2d,m mg/kg

Calcium ---j

Carbazole 0.6b mg/kg

Carbofuran 0.22b,l mg/kg

Carbon disulfide 9g mg/kg

Carbon tetrachloride 0.07b mg/kg

Chlordane 1.8g mg/kg

Chloride 4,000h,m mg/kg

4-Chloroaniline (p-Chloroaniline) 0.7b mg/kg

Chlorobenzene (Monochlorobenzene) 1b mg/kg

Chlorodibromomethane (Dibromochloromethane) 0.4b mg/kg

Chloroform 0.3g mg/kg

2-Chlorophenol 1.5d mg/kg

Chromium, total 21d,m mg/kg

Chrysene 88g mg/kg

Cobalt 20h,m mg/kg

Copper 2,900g mg/kg

Cyanide 40d,m mg/kg

2,4-D 1.5b mg/kg

Dalapon 0.85b mg/kg

DDD 3g mg/kg

DDE 2g mg/kg

DDT 2g mg/kg

Dibenzo(a,h)anthracene:

within Chicago corporate limits 0.20f mg/kg within a populated area in a MSA excluding Chicago 0.42f mg/kg within a populated area in a non-MSA county 0.15f mg/kg outside a populated area 0.09g mg/kg

1,2-Dibromo-3-chloropropane 0.002b mg/kg

1,2-Dibromoethane (Ethylene dibromide) 0.005c mg/kg

Di-n-butyl phthalate 2,300i mg/kg

1,2-Dichlorobenzene (o – Dichlorobenzene) 17b mg/kg

1,4-Dichlorobenzene (p – Dichlorobenzene) 2b mg/kg

3,3'-Dichlorobenzidine 1.3c mg/kg

1,1-Dichloroethane 23b mg/kg

1,2-Dichloroethane (Ethylene dichloride) 0.02b mg/kg

1,1-Dichloroethylene 0.06b mg/kg cis-1,2-Dichloroethylene 0.4b mg/kg trans-1,2-Dichloroethylene 0.7b mg/kg

2,4-Dichlorophenol 0.48d mg/kg

1,2-Dichloropropane 0.03b mg/kg

1,3-Dichloropropene (1,3-Dichloropropylene, cis + trans) 0.005c mg/kg

Dieldrin 0.603c mg/kg

Diethyl phthalate 470b mg/kg

2,4-Dimethylphenol 9b mg/kg

2,4-Dinitrophenol 3.3c mg/kg

2,4-Dinitrotoluene 0.25c mg/kg

2,6-Dinitrotoluene 0.26c mg/kg

Dinoseb 0.25d mg/kg

Di-n-octyl phthalate 1,600g mg/kg

Endosulfan 18b mg/kg

Endothall 0.4b,l mg/kg

Endrin 1b mg/kg

Ethylbenzene 13b mg/kg

Fluoranthene 3,100g mg/kg

Fluorene 560b mg/kg

Fluoride 80h,m mg/kg

Heptachlor 0.871c mg/kg

Heptachlor epoxide 1.005c mg/kg

Hexachlorobenzene 0.4g mg/kg

Alpha-HCH (alpha-BHC) 0.0074c mg/kg

Gamma-HCH (Lindane) 0.009b mg/kg

Hexachlorocyclopentadiene 1.1g mg/kg

Hexachloroethane 0.5b mg/kg

Indeno(1,2,3-c,d)pyrene:

within a populated area in a MSA excluding Chicago 1.6f mg/kg within Chicago corporate limits or within a populated area in a non-MSA county or outside a populated area 0.9g mg/kg

Iron:

within a MSA county 15,900e,m mg/kg within a non-MSA county 15,000e,m mg/kg

Isophorone 8b mg/kg

Lead 107d,m mg/kg

Magnesium 325,000g mg/kg

Manganese:

within a MSA county 636e,m mg/kg within a non-MSA county 630e,m mg/kg

Mercury:

elemental 0.1g,n mg/kg

Mercury:

ionic 0.89d,m,n mg/kg

Methoxychlor 160b mg/kg

Methyl bromide (Bromomethane) 0.2b mg/kg

Methyl tertiary-butyl ether 0.32b mg/kg

Methylene chloride (Dichloromethane) 0.02b mg/kg

2-Methylphenol (o – Cresol) 15b mg/kg

Naphthalene 1.8g mg/kg

Nickel 100d,m mg/kg

Nitrate as N 200h,m mg/kg

Nitrobenzene 0.26c mg/kg

N-Nitrosodiphenylamine 1b mg/kg

N-Nitrosodi-n-propylamine 0.0018c mg/kg

Pentachlorophenol 0.02d mg/kg

Phenol 100b mg/kg

Phosphorus ---j

Picloram 2b mg/kg

Polychlorinated biphenyls (PCBs) 1k mg/kg

Potassium ---j

Pyrene 2,300g mg/kg

Selenium 1.3d,m mg/kg

Silver 4.4d,m mg/kg

Simazine 0.04b mg/kg

Sodium ---j

Styrene 4b mg/kg

Sulfate 8,000h,m mg/kg

Tetrachloroethylene (Perchloroethylene) 0.06b mg/kg

Thallium 2.6d,m mg/kg

Toluene 12b mg/kg

Toxaphene 0.6g mg/kg

2,4,5-TP (Silvex) 11d mg/kg

1,2,4-Trichlorobenzene 5b mg/kg

1,1,1-Trichloroethane 2b mg/kg

1,1,2-Trichloroethane 0.02b mg/kg

Trichloroethylene 0.06b mg/kg

2,4,5-Trichlorophenol 26d mg/kg

2,4,6-Trichlorophenol 0.66c mg/kg

Vanadium 550g mg/kg

Vinyl acetate 10g mg/kg

Vinyl chloride 0.01b mg/kg m-Xylene 6.4g mg/kg o-Xylene 6.5g mg/kg p-Xylene 5.9g mg/kg

Xylenes (total) 5.6g mg/kg

Zinc 5,100d,m mg/kg a = Concentrations are the results after using methods described in 35 IAC 1100.Subpart F for determining the Maximum Allowable Concentrations of chemical constituents in uncontaminated soils used as fill material at regulated fill operations.

b = Value is the TACO Class I Soil Component of the Groundwater Ingestion Exposure Route concentration (35 IAC 742.Appendix B, Tables A and B).

c = Value is the TACO-defined Acceptable Detection Limit (ADL) for the chemical in soil.

d = Value is the lowest TACO Class I concentration between column range 6.25 to 6.64 and column range

8.75 to 9.0 from the pH-Specific Soil Remediation Objectives table for Inorganic and Ionizing Organic Chemicals for the Soil Component of the Groundwater Ingestion Route (35 IAC 742.Appendix B, Table C).

(See 35 IAC 1100.605(a)(2); 1100.605(a)(3)(A)).

e = Value is the location-specific allowable concentration based upon TACO-defined background values for inorganic chemicals (35 IAC 742.Appendix A, Table G). The location of the fill site determines the allowable concentration. Two background locations are defined; one for counties that are designated as Metropolitan Statistical Areas (MSA) (see Board Note, 35 IAC 742.Appendix A, Table G), the other for counties designated as a non-MSA.

f = Value is the location-specific allowable concentration based upon TACO-defined background values for polynuclear aromatic hydrocarbon chemicals (35 IAC 742.Appendix A, Table H). The location of the fill site determines the allowable concentration. Three background locations are defined; one for areas within the corporate limits of the City of Chicago, another for populated areas (defined at 35 IAC

742.200) in counties that are designated as Metropolitan Statistical Areas (MSA) (see Board Note, 35 IAC 742.Appendix A, Table G) excluding the City of Chicago, and the third for populated areas within non- MSA counties. No background concentrations have been defined for locations outside of populated areas; therefore, the maximum allowable concentrations in these locations are determined using 35 IAC 1100.Subpart F.

g = Value is the lowest TACO Soil Remediation Objective by the ingestion or inhalation routes of exposure for the Residential and Construction Worker receptors (35 IAC 742.Appendix B, Tables A and B). When applicable, definitions for “MSA” and “populated area” are presented in 35 IAC 742.Appendix A, Table H and 35 IAC 742.200, respectively.

h = Value is the TACO Class I Soil Component of the Groundwater Ingestion Exposure Route value multiplied by 20.

i = Soil saturation concentration (Csat).

j = This chemical is of no concern for soil ingestion and no data are available to assess other routes of exposure. There is no soil concentration limit established for this constituent.

k = Value for PCBs is the highest allowable concentration requiring no controls based on USEPA TSCA (40 CFR 761) policy.

l = SW-846 methods may not support analytical detection at the concentration specified. Modified or alternative methods may be required to achieve the lowest practical detection level possible.

m= As an alternative to the subject maximum allowable concentration value, compliance verification may be determined by comparing soil sample extraction results (TCLP/SPLP) for this constituent to the respective TACO Class I Soil Component of the Groundwater Ingestion Exposure Route objective (35 Ill.

Admin. Code 742.Appendix B, Table A). (See 35 IAC 1100.610(b)(1)(B); 1100.610(b)(3)(C)).

n = Elemental mercury is an inhalation hazard and is evaluated based upon the IRIS inhalation reference concentration for elemental mercury (CAS No. 7439-97-6). All other forms of mercury are evaluated using the IRIS oral reference dose for mercuric chloride (CAS No. 7487-94-7). The inhalation MAC only applies where elemental mercury is a contaminant of concern; the MAC for ionic mercury applies everywhere.