W912QR24R0034_B1244_Specs-0005.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See Amendment 0005 Continuation Page.

1. CONTRACT ID CODE PAGE OF PAGES

1 45

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912QR24R0034

X 9B. DATED (SEE ITEM 11)

04-Sep-2024

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO.

5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Apr-2025

CODE

U. S. ARMY ENGINEER DISTRICT, LOUISVILLE

600 DR. MARTIN LUTHER KING, JR. PLACE

ROOM 821

LOUISVILLE KY 40202-2239

W912QR 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912QR24R0034_B1244_Specs-0005

W912QR24R0034

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE (SF 30)

The following have been added by full text:

AMDT 0005 CONTINUATION PAGE

Solicitation W912QR24R0034 for the Construction of a KC-46 Two-Bay Maintenance/Fuel Cell Hangar at March ARB, CA is hereby modified as follows:

1. Wage Decision CA20250025, dated 28 February 2025, is hereby revised, and replaced in its entirety by Wage Decision CA20250025, dated 28 March 2025.

2. The following CLAUSES have been added in their entirety:

52.204-8 (Dev) Annual Representations and Certifications MAR 2025 52.204-29 Federal Acquisition Supply Chain Act Orders… DEC 2023 52.222-9 (Dev) Apprentices and Trainees MAR 2025 52.223-23(Dev) Sustainable Products and Services MAR 2025 52.226-7 Drug Free Workplace MAY 2024 52.226-8 Encouraging Contractor Policies to Ban Text… MAY 2024 52.240-1 Prohibition of Unmanned Aircraft Systems… NOV 2024 52.244-6 (Dev) Subcontractors for Commercial Products… MAR 2025 252.225-7058 Postaward Disclosure of Employment of… JAN 2023 252.225-7972 (Dev O0014) Prohibition on the Procurement… AUG 2024 252.225-7973 (Dev O0014) Prohibition on the Procurement… AUG 2024

3. The following CLAUSES have been revised and replaced in their entirety:

52.217-7 Option for Increased Quantity-Separately Priced Line Item MAR 1989 252.225-7966 (Dev 24-0006, Rev1) Prohibition Regarding Russian… MAR 2024 252.225-7967 (Dev 24-0006, Rev1) Prohibition Regarding Russian… FEB 2024

4. The following CLAUSES have been removed in their entirety:

52.204-8 Annual Representations and Certifications JAN 2025 52.222-9 Apprentices and Trainees JUL 2005 52.222-21 Prohibition of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-27 Affirmative Action Compliance Requirement for Construction APR 2015 52.222-33 Notice of Requirement of Project Labor Agreement MAY 2010 52.222-34 Project Labor Agreement MAY 2010 52.223-21 Foams JUN 2016 52.225-9 Buy American Construction Materials OCT 2022 252.225-7972 (Dev O0015) Prohibition on the Procurement... MAY 2020 252.225-7973 (Dev O0015) Prohibition on the Procurement... MAY 2020

5. The PRICE BREAKOUT SCHEDULE has been replaced in its entirety:

6. The following PLAN SHEETS have been revised and replaced in their entirety:

KC-46A Two Bay Hangar P2- 505421/ P2#509757: Mooring Points & Restriping

VOLUME I

CS101 ENLARGED SITE PLAN – 1

CS502 SITE DETAILS – 2

S-001 GENERAL NOTES

S-111 SLAB JOINTING PLAN – AREA A

S-112 SLAB JOINTING PLAN – AREA B

S-115 SLAB JOINTING PLAN – AREA E

S-116 SLAB JOINTING PLAN – AREA F

S-117 SLAB JOINTING PLAN – AREA G

S-118 SLAB JOINTING PLAN – AREA H

S-119 SLAB JOINTING PLAN – AREA J

S-121 LOW ROOF FRAMING PLAN – AREA A

S-122 LOW ROOF FRAMING PLAN – AREA B

S-125 LOW ROOF FRAMING PLAN – AREA E

S-126 LOW ROOF FRAMING PLAN – AREA F

S-127 LOW ROOF FRAMING PLAN – AREA G

S-128 LOW ROOF FRAMING PLAN – AREA H

S-129 LOW ROOF FRAMING PLAN – AREA J

S-136 BOTTOM CHORD FRAMING PLAN – AREA F

S-146 HIGH ROOF FRAMING PLAN – AREA F

S-403 ELEVATED SLAB ENLARGED PLANS AND DETAILS

S-405 EQUIPMENT PLATFORM FRAMING ENLARGED PLANS AND DETAILS – AREA

F & G

S-406 EQUIPMENT PLATFORM FRAMING ENLARGED PLANS AND DETAILS – AREA

H & I

VOLUME II

S-557 FRAMING DETAILS - SHOPS/ADMIN

GI010 LIFE SAFETY PLAN - GROUND FLOOR – OVERALL

A-010 AIRCRAFT CLEARANCE AND STRIPING – OVERALL

A-162 REFLECTED CEILING PLAN - OPTION BIRD NETTING

A-304 BUILDING SECTIONS

A-501 PARTITION TYPES

A-511 PARTITION TYPE DETAILS

A-601 DOOR SCHEDULE 100 – 200

A-701 ROOM FINISH SCHEDULE AND INTERIOR FINISH LEGEND

EG101 GROUNDING PLAN – GROUND FLOOR – OVERALL

EP101 POWER PLAN - GROUND FLOOR – AREA A

TN401 SPECIAL SYSTEMS – ENLARGED PLANS AND ELEVATION – COMM 112

TN402 SPECIAL SYSTEMS – ENLARGED PLANS AND ELEVATION – COMM 147

TN403 SPECIAL SYSTEMS – ENLARGED PLANS AND ELEVATION – COMM 304

TN404 SPECIAL SYSTEMS – ENLARGED PLANS AND ELEVATION – COMM 332

TN502 SPECIAL SYSTEMS DETAILS

TS101 COMMUNICATION SITE PLAN – OVERALL

P2# 504634 Addition/Alteration of B1244:

A-201 EXTERIOR BUILDING ELEVATIONS

A-312 WALL SECTIONS

A-313 WALL SECTIONS

A-601 DOOR TYPES/SCHEDULE

CP101 PAVEMENT JOINTING PLAN

CS504 SIDE DETAILS-4

ED102 ELECTRICAL DEMOLITION PLAN- AREA A

EP601 ELECTRICAL ONE-LINE DIAGRAMS

M-602 MECHANICAL SCHEDULES

P-502 PLUMBING DETAILS

S-002 GENERAL STRUCTURAL NOTES

S-111 LOW ROOF FRAMING PLAN – AREA A

S-301 WALL SECTIONS

S-302 WALL SECTIONS

S-532 STANDARD CFS FRAMING DETAILS

S-533 STANDARD CFS FRAMING DETAILS

TN401 TELECOMMUNICATIONS ENLARGED PLAN

TS101 TELECOMMUNICATIONS SITE PLAN

7. The following SPECIFICATION SECTIONS have been revised and replaced in their entirety:

KC-46A Two Bay Hangar P2- 505421/ P2#509757: Mooring Points & Restriping

00 10 00 PRICE BREAKOUT SCHEDULE

01 46 00.00 06 TOTAL BUILDING COMMISSIONING

05 40 00 COLD-FORMED METAL FRAMING

07 60 00 FLASHING AND SHEET METAL

08 11 13 STEEL DOORS AND FRAMES

09 67 23.13 STANDARD RESINOUS FLOORING

09 90 00 PAINTS AND COATINGS

22 00 00 PLUMBING, GENERAL PURPOSE

26 32 15.00 ENGINE-GENERATOR SET STATIONARY 15-2500 KW, WITH

AUXILIARIES

31 00 00.00 06 EARTHWORK

41 22 13.15 BRIDGE CRANES, OVERHEAD ELECTRIC, UNDER RUNNING

TROLLEY

SUBMITTAL REGISTER ATTACHMENT

P2# 504634 Addition/Alteration of B1244:

FUT_TOC PROJECT TABLE OF CONTENTS

05 40 00 COLD-FORMED METAL FRAMING

08 11 13 STEEL DOOR AND FRAMES

09 90 00 TOTAL BUILDING COMMISSIONING

13 34 19 METAL BUILDING SYSTEMS

22 00 00 PLUMBING, GENERAL PURPOSE

SUBMITTAL REGISTER ATTACHMENT

8. The following SPECIFICATION SECTIONS have been removed in their entirety:

P2# 504634 Addition/Alteration of B1244:

31 32 23.00 LOW MOBILITY GROUTING & GROUT PILES

9. All other terms and conditions remain unchanged.

SECTION 00 10 00 - SOLICITATION

The standard size code has changed from $39,500,000 to $45,000,000.

The following have been modified:

PRICE BREAKOUT SCHEDULE

Amendment 0005

Project:

KC-46A Two-Bay Maintenance Hangar (PN PDPG 221012) KC-46A Fuselage Trainer (PN PDPG 221014) KC-46A Mooring Points & Restriping (PN PDPG 221021)

Location: March Air Reserve Base, California

Proposer's Name:

Item No. Description Quantity Unit Unit Price Amount

BASE PROPOSAL

0001 Primary Facility – KC- 46A Two-Bay Maintenance Hangar

1 Job N/A $

0002 Primary Facility – KC- 46A Fuselage Trainer

1 Job N/A $

0003 CMU Wall Crack Repair

– Fuselage Trainer

240 LF $ $

0004 Sitework – KC-46A Two-Bay Maintenance Hangar

1 Job N/A $

0005 Sitework – KC-46A Fuselage Trainer

1 Job N/A $

0006 B1246 Demolition 1 Job N/A $

0007 Western Municipal Water District - Water Inspection Fee

1 Job N/A $ 91,965.00

0008 Western Municipal Water District – Sewer Inspection Fee

1 Job N/A $ 70,965.00

0009 Contaminated Soil Removal and Disposal

50 CY $ $

0010 Contaminated Water Removal

30 Days $ $

TOTAL BASE PROPOSAL $

Item No. Description Quantity Unit Unit Price Amount

OPTIONS

0011A Option A – 5 Coat Floor Finish for Hangar Bays

1 Job N/A $

0011B Option B – Shake-on Floor Hardener for Hangar Bays

1 Job N/A $

0012 Option C – One 400 Hz Convertor

1 Job N/A $

0013 Option D – One 400 Hz Convertor

1 Job N/A $

0014 Option E – Breathing Compressor, Purifier, Receiver Tank

1 Job N/A $

0015 Option F – Flooded Screw Air Compressor

1 Job N/A $

0016 Option G – Reciprocating Air Compressor, Dryer, Receiver Tank

1 Job N/A $

0017 Option H – Aircraft Fall Protection System

1 Job N/A $

0018 Option I – Aircraft Wash System

1 Job N/A $

0019 Option J – Painting of Structural Building Steel

1 Job N/A $

0020 Option K – Furnishings - Two-Bay Maintenance Hangar

1 Job N/A $

0021 Option L – Furnishings – Fuselage Trainer

1 Job N/A $

0022 Option M – Bird Netting

- Two-Bay Maintenance Hangar

1 Job N/A $

0023 Option N – Bird Netting for Canopy Structure – Fuselage Trainer

1 Job $ $

0024 Option O – Exterior Insulated Metal Panel – Fuselage Trainer

1 Job $ $

Item No. Description Quantity Unit Unit Price Amount

0025 Option P – Generator - Two-Bay Maintenance Hangar

1 Job N/A $

0026 Option Q - Contaminated Soil Removal and Disposal

50 CY $ $

0027 Option R – Contaminated Water Removal

30 Days $ $

0028 Option S - Airfield Striping and Mooring Points

1 Job N/A $

TOTAL OPTIONS $

TOTAL BASE PROPOSAL AND ALL

OPTIONS

Description of Base Bid Proposal Items

a) Item No. 0001 "Primary Facility – KC-46A Hangar" includes all Base Proposal work required within a line five feet outside of the new KC-46A Hangar.

b) Item No. 0002 "Primary Facility – KC-46A Fuselage Trainer" includes all Base Proposal work required within a line five feet outside of the new KC-46A Fuselage Trainer.

c) Item No. 0003 " CMU Wall Crack Repair – Fuselage Trainer" includes all Base Proposal work required for repair of cracks within the existing CMU Wall. Cracks are to be cleaned and sealed with epoxy resin per manufactures recommendations for an existing wall.

d) Item No. 0004 "Sitework - KC-46A Hangar " includes all Base Proposal work required for demolition (exclusive of that work covered under Item No. 0006 B1246 Demolition), site clearing, grading and drainage, utilities, paving, landscaping, permits, and other construction work required beyond a line five feet outside of the new KC-46A Hangar.

e) Item No. 0005 "Sitework - KC-46A Fuselage Trainer " includes all Base Proposal work required for demolition (exclusive of that work covered under Item No. 0006 B1246 Demolition), site clearing, grading and drainage, utilities, paving, landscaping, permits, and other construction work required beyond a line five feet outside of the new KC-46A Hangar.

f) Item No. 0006 "B1246 Demolition" includes all Base Proposal work associated with the demolition and removal of the existing hangar (Building 1246), to include all work required for removal of the complete building and foundations systems.

g) Item No. 0007 " Western Municipal Water District - Water Inspection Fee " includes the inspection fee required to be paid to Western Municipal District during construction.

h) Item No. 0008 " Western Municipal Sewer District - Water Inspection Fee " includes the inspection fee required to be paid to Western Municipal District during construction.

i) Item No. 0009 “Contaminated Soil Removal and Disposal” includes the work shall include removal and disposal of contaminated soil associated with construction on this project. Costs for this item shall include excavation, laboratory analytical testing, characterization, manifesting, confirmation sampling, containerization, transportation, and off-site disposal. Cost should also be included if Contractor determined additional fill is required to replace the off-site disposal amount. For estimating purposes any waste encountered would be classified as industrial waste and not Hazardous waste.

j) Item No. 0010 “Contaminated Water Removal” includes all work, materials, and labor required to remove contaminated groundwater from site. This includes the required equipment for dewatering and treating the ground water as described within the drawings and specifications. Quantity is estimated and is subject to the requirements of FAR 51.211-18 Variation in Estimated Quantity.

Variations in the actual quantities encountered will be the subject of a contract modification as provided in Clause 52.211-18 Variation in Estimated Quantities.

Description of Option Bid Items

k) Item No. 0011A “Option A – 5 Coat Floor Finish for Hangar Bays” includes all additional work required to provide and install the 5-coat floor coating system for both Hangar Bays, in lieu of the sealed concrete pavement and other items included in the Base Proposal. See drawings and specifications for further definition.

NOTE: This option cannot be awarded if “Option B – Shake-on Floor Hardener for both Hangar Bays” is awarded.

***This option may be exercised within 180 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

l) Item No. 0011B “Option B – Shake-on Floor Hardener for Hangar Bays” includes all additional work required to provide and install the shake on floor hardener system for both Hangar Bays, in lieu of the sealed concrete pavement and other items included in the Base Proposal. See drawings and specifications for further definition.

NOTE: This option cannot be awarded if “Option A – 5 Coat Floor Finish for both Hangar Bays” is awarded.

*** This option may be exercised within 180 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

m) Item No. 0012 “Option C – One 400 Hz Convertor” includes all work required to provide and install of one 400Hz Conver10tor and 400Hz Cable Assembly. All 480V/60Hz electrical distribution to the convertor shall be included in the Base Proposal.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

n) Item No. 0013 “Option D – One 400 Hz Convertor” includes all work required to provide and install of one 400Hz Convertor and 400Hz Cable Assembly. All 480V/60Hz electrical distribution to the convertor shall be included in the Base Proposal.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

o) Item No. 0014 “Option E – Breathing Compressor, Purifier, Receiver Tank” includes all work required to provide and install of the breathing air compressor (AC-103), breathing air receiver tank (AR-102), and breathing air purifier (PUR-101). All breathing air distribution piping and accessories downstream of the purifier shall be included in the Base Proposal.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

p) Item No. 0015 “Option F – Flooded Screw Air Compressor” includes all work required to provide and install the oil flooded screw air compressor (AC-101), as shown in the schedule. All compressed air distribution piping downstream shall be included in the Base Proposal. The Base Proposal includes all compressed air distribution piping downstream as shown on the drawings.

*** This option may be exercised within 540 days after Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

q) Item No. 0016 “Option G – Reciprocating Air Compressor, Dryer, Receiver Tank” includes all work required to provide and install of the reciprocating air compressor (AC-102), thermal mass compressed air dryer (RAD-101), and compressed air receiver tank (AR-101). The Base Proposal includes all compressed air distribution piping and accessories downstream of the compressed air dryer.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

r) Item No. 0017 “Option H – Aircraft Fall Protection System” includes all work required to provide and install an aircraft fall protection system (including fall protection track, self-retracting lanyards, harnesses, and miscellaneous bracing/supports for the fall protection track) in both bays of the new KC-46A Hangar. See drawings and specifications for further definition.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

s) Item No. 0018 “Option I – Aircraft Wash System” includes all work required to provide and installation of the aircraft wash booster pump. See drawings and specifications for further definition.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

t) Item No. 0019 “Option J – Painting of Structural Building Steel” includes all work and materials required to paint all exposed steel within both bays of the new KC-46A Hangar. See specifications for further information.

*** This option may be exercised within 30 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

u) Item No. 0020 “Option K – Furnishings – Two-Bay Maintenance Hangar” includes all work required to provide and installation of the furnishings for the facility. See drawings and specifications for further definition.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

v) Item No. 0021 “Option L – Furnishings – Fuselage Trainer” includes all work required to provide and installation of the furnishings for the facility. See drawings and specifications for further definition.

*** This option may be exercised within 540 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

w) Item No. 0022 “Option M – Bird Netting – Two-Bay Maintenance Hangar” includes all work, materials, and labor required to install bird netting in the hangar bays. See drawings and specifications for further definition.

*** This option may be exercised within 90 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

x) Item No. 0023 “Option N – Bird Netting for Canopy Structure – Fuselage Trainer” includes all work, materials, and labor required to install bird netting in the hangar bays. See drawings and specifications for further definition.

*** This option may be exercised within 90 days after Administrative Notice-To-Proceed (NTP) is issued.

y) Item No. 0024 “Option O – Exterior Insulated Metal Panels – Fuselage Trainer” includes all work required to demolish existing metal siding, provide and installation of the insulated metal panels for the facility. See drawings and specifications for further definition.

*** This option may be exercised within 90 days after Administrative Notice-To-Proceed (NTP) is issued.

z) Item No. 0025 “Option P – Generator – Two-Bay Maintenance Hangar” includes all work required to purchase and install the Generator as noted on ES101. The generator will be O&M Funded. See drawings and specifications for further definition.

*** This Option will be awarded at the time of Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

aa) Item No. 0025 “Option Q – Contaminated Soil Removal and Disposal” includes the work shall include removal and disposal of contaminated soil associated with construction on this project. Costs for this item shall include excavation, laboratory analytical testing, characterization, manifesting, confirmation sampling, containerization, transportation, and off-site disposal. Cost should also be included if Contractor determined additional fill is required to replace the off-site disposal amount.

For estimating purposes any waste encountered would be classified as industrial waste and not Hazardous waste.

*** This option may be exercised within 360 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

bb) Item No. 0026 “Option R – Contaminated Water Removal” includes all work, materials, and labor required to remove contaminated groundwater from site. This includes the required equipment for dewatering and treating the ground water as described within the drawings and specifications. Quantity is estimated and is subject to the requirements of FAR 51.211-18 Variation in Estimated Quantity. Variations in the actual quantities encountered will be the subject of a contract modification as provided in Clause 52.211-18 Variation in Estimated Quantities.

***This option may be exercised within 365 calendar days after issuance of the Administrative Notice to Proceed and does not extend the period of performance.

cc) Item No. 0027 "Airfield Restriping and Mooring Points” includes all work, materials, and labor required for restriping and installation of mooring points in the existing apron. This work is as described on drawings CD120, CD127, CD128, CD129, CS103, CS104, CS105, CS106, and CS108.

*** This option may be exercised within 90 days after Administrative Notice-To-Proceed (NTP) is issued and does not extend the period of performance.

- END OF PRICE BREAKOUT SCHEDULE -

SECTION 00 21 00 - INSTRUCTIONS

The following have been modified:

PROJNET INSTRUCTIONS

OFFEROR'S QUESTIONS AND COMMENTS

Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.ProjNet.org/ProjNet. As noted below, offerors shall not submit their proposals via ProjNet.

Offerors shall submit their proposals in accordance with the provisions stated in the solicitation.

To submit and review bid inquiry items, bidders will need to be a current registered user or selfregister into system.

The Solicitation Number is: W912QR24R0034 The Bidder Inquiry Key is: 6C7HIN-X3EUB5

Specific Instructions for ProjNet Bid Inquiry Access:

1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

2. Identify the Agency. This should be marked as USACE.

3. Key. Enter the Bidder Inquiry Key listed above.

4. Email. Enter the email address you would like to use for communication.

5. Select Continue. A page will then open stating a user account was not found and will ask you to create one using the provided form.

6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system.

7. Select Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

Specific Instructions for Future ProjNet Bid Inquiry Access:

1. For future access to ProjNet, you will not be emailed any type of password. You will utilize your Secret

Question and Secret Answer to log in.

2. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

3. Identify the Agency. This should be marked as USACE.

4. Key. Enter the Bidder Inquiry Key listed above.

5. Email. Enter the email address you used to register previously in ProjNet.

6. Select Continue. A page will then open asking you to enter the answer to your SecretQuestion.

7. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system.

From this page you may view all bidder inquiries or add an inquiry.

Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.

Offerors are requested to review the specification in its entirety and to review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

NOTES:

1. Offerors shall not submit their proposals via ProjNet, but in accordance with the provisions stated in the solicitation. Any questions regarding acceptable means of submitting offers shall be made directly to the Contract Specialist identified in the solicitation.

2. Government responses to technical inquiries and questions relating to proposal procedures or bonds that are submitted to ProjNet in accordance with the procedures above are not binding on the Government unless an amendment is issued on Standard Form 30. In the case of any conflicts, the solicitation governs.

Any changes or revisions to the solicitation will be made by formal amendment. Government responses will be limited to: (a) Notice that an amendment will be issued; (b) Reference to an existing requirement contained in the solicitation; or (c) Notice that a response is not necessary.

3. The ability to enter technical inquiries and questions relating to proposal procedures or bonds is due No Later than (NTL) 4:00 PM ET 11 April 2025. No Government responses will be entered into the ProjNet system after 15 April 2025.

SECTION 00 45 00 - REPRESENTATIONS AND CERTIFICATIONS

The following have been added by reference:

252.225-7973 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems - Representation (DEVIATION 2024- O0014)

AUG 2024

The following have been added by full text:

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2025-O0003/ DEVIATION

2025-O0004) (MAR 2025)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 236220.

(2) The small business size standard is $45M.

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition--

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph

(d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

[ ] Paragraph (d) applies.

[ ] Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.204-26, Covered Telecommunications Equipment or Services--Representation. This provision applies to all solicitations.

(vii) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations--Representation.

(viii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(ix) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(x) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(xi) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xii) 52.219-1, Small Business Program Representations (Basic, Alternates I, and II). This provision applies to solicitations when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(C) The provision with its Alternate II applies to solicitations that will result in a multiple-award contract with more than one NAICS code assigned.

(xiii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(xiv) [Reserved]

(xv) [Reserved]

(xvi) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial products or commercial services.

(xvii) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of biobased products in USDA-designated product categories; or include the clause at 52.223-2, Reporting of Biobased Products Under Service and Construction Contracts.

(xviii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xix) [Reserved]

(xx) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xxi) 52.225-4, Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Basic, Alternates II and III.)

This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $50,000, the basic provision applies.

(B) If the acquisition value is $50,000 or more but is less than $100,000, the provision with its Alternate II applies.

(C) If the acquisition value is $100,000 or more but is less than $102,280, the provision with its Alternate III applies.

(xxii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xxiii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxiv) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certification. This provision applies to all solicitations.

(xxv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

X (i) 52.204-17, Ownership or Control of Offeror.

X (ii) 52.204-20, Predecessor of Offeror.

(iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

(v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.

(vi) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(vii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The Offeror has completed the annual representations and certifications electronically in SAM accessed through https://www.sam.gov. After reviewing the SAM information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [ offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of provision)

The following have been deleted:

52.204-8 Annual Representations and Certifications JAN 2022 252.225-7966 (Dev) Prohibition Regarding Russian Fossil Fuel Business

Operations - Representation (Deviation 2024-O0006).

FEB 2024

252.225-7973 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems - Representation (DEVIATION 2020- O0015)

MAY 2020

SECTION 00 70 00 - CONDITIONS OF THE CONTRACT

The following have been added by reference:

52.222-9 (Dev) Apprentices and Trainees (DEVIATION 2025-O0003) MAR 2025 52.223-23 (Dev) Sustainable Products and Services (DEVIATION 2025-

O0004)

MAR 2025

52.226-7 Drug-Free Workplace MAY 2024 52.226-8 Encouraging Contractor Policies To Ban Text Messaging

While Driving

MAY 2024

52.240-1 Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act--Covered Foreign Entities

NOV 2024

52.244-6 (Dev) Subcontracts for Commercial Products and Commercial Services (DEVIATION 2025-O0003)

MAR 2025

252.204-7012 (Dev) Safeguarding Covered Defense Information and Cyber Incident Reporting (DEVIATION 2024-O0013 REVISION 1)

MAY 2024

252.225-7058 Postaward Disclosure of Employment of Individuals Who Work in the People's Republic of China

JAN 2023

252.225-7966 (Dev) Prohibition Regarding Russian Fossil Fuel Business Operations - Representation (Deviation 2024-O0006).

MAR 2024

252.225-7967 (Dev) Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006).

MAR 2024

252.225-7972 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems (DEVIATION 2024-O0014)

AUG 2024

The following have been added by full text:

52.204-29 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS--REPRESENTATION

AND DISCLOSURES (DEC 2023)

(a) Definitions. As used in this provision, Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive compartmented information system, and Source have the meaning provided in the clause 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition.

(b) Prohibition. Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition.

(c) Procedures.

(1) The Offeror shall search for the phrase "FASCSA order" in the System for Award Management (SAM)(https://www.sam.gov) for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) Disclosures. The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

(End of provision)

The following have been modified:

52.217-7 OPTION FOR INCREASED QUANTITY--SEPARATELY PRICED LINE ITEM (MAR 1989)

The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the options by written notice to the Contractor within the Price Breakout Schedule.

(End of clause)

The following have been deleted:

52.222-9 Apprentices and Trainees JUL 2005 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-23 Notice of Requirement for Affirmative Action to Ensure

Equal Employment Opportunity for Construction

FEB 1999

52.222-26 Equal Opportunity SEP 2016 52.222-27 Affirmative Action Compliance Requirements for

Construction

APR 2015

52.222-33 Notice of Requirement for Project labor Agreement MAY 2010 52.222-34 Project Labor Agreement MAY 2010 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.223-21 Foams JUN 2016 52.225-9 Buy American--Construction Materials NOV 2021 52.244-6 Subcontracts for Commercial Products and Commercial

Services

JAN 2022

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.225-7967 (Dev) Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006).

FEB 2024

252.225-7972 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems (DEVIATION 2020-O0015)

MAY 2020

SECTION 00 73 00 - SUPPLEMENTARY CONDITIONS

The following have been added by full text:

WAGE DETERMINATION

"General Decision Number: CA20250025 03/28/2025

Superseded General Decision Number: CA20240025

State: California

Construction Types: Building, Heavy (Heavy and Dredging) and Highway

County: Riverside County in California.

BUILDING CONSTRUCTION PROJECTS; DREDGING PROJECTS (does not include hopper dredge work); HEAVY CONSTRUCTION PROJECTS (does not include water well drilling); HIGHWAY CONSTRUCTION PROJECTS

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.75 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2025. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $13.30 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2025. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2025 1 01/10/2025 2 01/24/2025 3 02/07/2025 4 02/21/2025 5 02/28/2025 6 03/28/2025

ASBE0005-002 09/01/2023

Rates Fringes

Asbestos Workers/Insulator (Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 49.58 25.27 Fire Stop Technician (Application of Firestopping Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 36.97 20.36

ASBE0005-004 07/04/2022

Rates Fringes

Asbestos Removal worker/hazardous material handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 23.52 13.37

BOIL0092-003 01/01/2024

Rates Fringes

BOILERMAKER......................$ 51.98 42.11

* BRCA0004-011 05/01/2024

Rates Fringes

BRICKLAYER; MARBLE SETTER........$ 45.53 20.29

*The wage scale for prevailing wage projects performed in Blythe, China lake, Death Valley, Fort Irwin, Twenty-Nine Palms, Needles and 1-15 corridor (Barstow to the Nevada State Line) will be Three Dollars ($3.00) above the standard San Bernardino/Riverside County hourly wage rate

BRCA0018-004 06/01/2024

Rates Fringes

MARBLE FINISHER..................$ 43.38 15.36

TILE FINISHER....................$ 37.96 13.77

TILE LAYER.......................$ 51.82 19.32

* BRCA0018-010 09/01/2024

Rates Fringes

TERRAZZO FINISHER................$ 42.11 14.67

TERRAZZO WORKER/SETTER...........$ 49.62 15.26

CARP0213-001 01/01/2024

Rates Fringes

CARPENTER

(1) Carpenter, Cabinet Installer, Insulation Installer, Hardwood Floor Worker and acoustical installer...................$ 48.86 22.88

(2) Millwright..............$ 49.36 22.88

(3) Piledrivermen/Derrick Bargeman, Bridge or Dock Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler

(Commercial)................$ 48.99 22.88

(4) Pneumatic Nailer, Power Stapler...............$ 51.85 16.28

(5) Sawfiler...............$ 51.69 16.28

(6) Scaffold Builder.......$ 40.77 22.38

(7) Table Power Saw

Operator....................$ 51.70 16.28

FOOTNOTE: Work of forming in the construction of open cut sewers or storm drains, on operations in which horizontal lagging is used in conjunction with steel H-Beams driven or placed in pre- drilled holes, for that portion of a lagged trench against which concrete is poured, namely, as a substitute for back forms (which work is performed by piledrivers): $0.13 per hour additional.

CARP0213-002 07/01/2021

Rates Fringes

Diver

(1) Wet.....................$ 834.40 16.28

(2) Standby.................$ 445.84 16.28

(3) Tender..................$ 437.84 16.28

(4) Assistant Tender........$ 413.84 16.28

Amounts in ""Rates' column are per day

CARP0213-004 01/01/2024

Rates Fringes

Drywall

DRYWALL INSTALLER/LATHER....$ 48.86 22.88

STOCKER/SCRAPPER............$ 20.80 9.97

CARP0721-001 07/01/2021

Rates Fringes

Modular Furniture Installer......$ 21.85 7.15

ELEC0440-001 12/30/2024

Rates Fringes

ELECTRICIAN

INSIDE ELECTRICIAN..........$ 56.26 3%+28.48

INTELLIGENT TRANSPORTATION

SYSTEMS

Electrician................$ 36.99 3%+23.18 Technician.................$ 27.75 3%+23.18

ZONE PAY: Zone A: Free travel zone for all contractors performing work in Zone A.

Zone B:Any work performed in Zone (B) shall add $12.00 per hour to the current wage scale. Zone (B) shall be the area from the eastern perimeter of Zone (A) to a line which runs north and south begininng at Little Morongo Canyon (San Bernardino/Riverside County Line), Southeast along the Coachella Tunnels, Colorado River Aqueduct and Mecca Tunnels to Pinkham Wash then South to Box Canyon Road, then southwest along Box Canyon Road to Highway 195 west onto 195 south to Highway 86 to Riverside/Imperial County Line.

ELEC1245-001 01/01/2025

Rates Fringes

LINE CONSTRUCTION

(1) Lineman; Cable splicer..$ 70.16 24.71

(2) Equipment specialist (operates crawler tractors, commercial motor vehicles, backhoes, trenchers, cranes (50 tons and below), overhead & underground distribution line equipment).............$ 53.30 22.26

(3) Groundman...............$ 40.76 21.76

(4) Powderman...............$ 51.87 18.79

HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day and day after Thanksgiving, Christmas Day

ELEV0018-001 01/01/2025

Rates Fringes

ELEVATOR MECHANIC................$ 69.43 38.435+a+b

FOOTNO…