Attachment 006 - I-BOM Sample.xlsx

XLSX spreadsheet 31 KB Posted

Attached to
Mobile Tactical Cannon (MTC) Request for Prototype Proposal
Solicitation number
W912CH26RA017
Issued by

About this file

This is a sample template for a Production Baseline Indentured Bill of Materials (I-BOM) spreadsheet associated with the Joint Light Tactical Vehicle (JLTV) Low-Rate Initial Production and Full-Rate Production contract W56HZV-15-C-0095 with Oshkosh Defense, LLC. The template is marked FOR OFFICIAL USE ONLY (FOUO) and contains technical data restricted by the Arms Export Control Act and Export Administration Act.

The I-BOM template provides a structured format for documenting component-level information including OEM part numbers, item names, CAGE codes, quantities, drawing references, NSN nomenclature, next higher assembly details, vendor/alternate part information, manufacturer details, software/firmware versions, component types, provisioning status, lead times, stock on hand, end-of-life status, recommended replacements, and cost data (including unit cost, cost source, make-or-buy determination, and extended cost). The template includes a comprehensive dropdown menu of component classifications spanning hardware categories (ASICs, FPGAs, ROM, SRAM, oscillators, processors, PCBs, microcontrollers, logic devices, LRUs) and software/firmware categories (operating systems, applications, databases, tools). The document specifies that the final P-BL submission should include only the Title Page and P-BL sheets with actual component data replacing the placeholder X values shown in this sample format.

View the file

Other files

File Type Posted
MTC OTA Request for Prototype Proposal AMD 03.docx DOCX document
MTC OTA Prototype Project Agreement AMD 02.docx DOCX document
MTC RPP Questions and Responses (Dist A) revC.xlsx XLSX spreadsheet
Appendix E - Milestone Pricing Summary_20 APR 2026.xlsx XLSX spreadsheet
MTC OTA Request for Prototype Proposal AMD 02.docx DOCX document
MTC OTA Prototype Project Agreement AMD 02.docx DOCX document
MTC RPP Questions and Responses (Dist A) revB.xlsx XLSX spreadsheet
Appendix E - Milestone Pricing Summary_02 APR 2026.xlsx XLSX spreadsheet
MTC OTA Request for Prototype Proposal AMD 01.docx DOCX document
MTC OTA Prototype Project Agreement AMD 01.docx DOCX document
Attachment 019 - As-built Production Unit Cost Volume revB.xlsx XLSX spreadsheet
Appendix A - Project Articles_31 MAR 2026.docx DOCX document
Appendix E - Milestone Pricing Summary 31_MAR 2026.xlsx XLSX spreadsheet
Attachment 001 Contract Data Requirements Lists (CDRLs)_31 MAR 2026.pdf PDF
MTC RPP Questions and Responses (Dist A).xlsx XLSX spreadsheet
Attachment 003 - Supply Chain Market Checklist.pptx PPTX presentation
Attachment 004 - Assertion of Restrictions.xlsx XLSX spreadsheet
Attachment 009 - Proof Gun system Overview Distro A - Embedded video 1.pdf PDF
Attachment 016 - MTC Sample Special License Agreement (SLA).docx DOCX document
MTC OTA Request for Prototype Proposal.docx DOCX document
Appendix A - Project Articles.docx DOCX document
Appendix B - Project Other Terms and Conditions 9 Mar 26.docx DOCX document
Attachment 001 Contract Data Requirements Lists (CDRLs).pdf PDF
Attachment 011 - TDP OPTION WORKSHEET TDP.pdf PDF
Attachment 013 ATTLA_Universal_Data_Sheet 9 Mar 26.xlsx XLSX spreadsheet
Attachment 014 POL Guide v1.2 2024.pdf PDF
MTC OTA Prototype Project Agreement 9 Mar 26.docx DOCX document
Appendix E(2) - Milestone Pricing Sheet - Table F-2 Continuation.xlsx XLSX spreadsheet
Attachment 005 - As-Built Configuration Template.xlsx XLSX spreadsheet
Appendix C - Representations and Certifications.docx DOCX document
Appendix E - Milestone Pricing Summary.xlsx XLSX spreadsheet
Appendix E(1) - Milestone Pricing Sheet - Table F-1.xlsx XLSX spreadsheet
Attachment 007 - MATCE Input Datasheet Wheeled Vehicles.xlsx XLSX spreadsheet
Attachment 010 - TDP OPTION WORKSHEET CAD.pdf PDF
Attachment 012 MTC Test Schedule Breakdown.xlsx XLSX spreadsheet
Attachment 019 - As-built Production Unit Cost Volume.xlsx XLSX spreadsheet
Show all 36

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Cover Page

UNCLASSIFIED

Item Description:Production Baseline - Indentured Bill of Materials
Cover Page

Distribution Statement A. Approved for Public Release; distribution is unlimited. PEO GSC OPSEC# OPSEC-2026-275

(*Distribution Statement A only applies when form is not filled in. Once filled check the Security Class Guide for proper distribution statement/markings)

As part of the P-BL development, delete this sheet and submit only the "Title Page" and "P-BL" sheets.

&"Arial,Bold"&8OSHKOSH DEFENSE, LLC – JLTV LRIP / FRP – W56HZV-15-C-0095 &F &G

&"Arial,Bold"&8OSHKOSH DEFENSE, LLC – JLTV LRIP / FRP – W56HZV-15-C-0095 &F &G

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

Title Page

Contract #
PROGRAM NAME
Contractor Name
CDRL####Rev #
Item Description:(Contractor Name) (MTC or RSV) IBOM
Delivery Type:Draft
h
Due Date:
Submittal Date:

DISTRIBUTION STATEMENT XXXX: Distribution authorized to the Department of Defense and U.S. DOD contractors only (Administrative or Operational use; export controlled) (Date of Determination: XXXX). Other requests for this document shall be referred to XXXX Security Manager at: Program Executive Office XXXX, ATTN: XXXX, 6501 East 11 Mile Road, Mail Stop 506, Warren, MI 48397-5000.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

Distribution Statement A. Approved for Public Release; distribution is unlimited. PEO GSC OPSEC# OPSEC-2026-275

(*Distribution Statement A only applies when form is not filled in. Once filled check the Security Class Guide for proper distribution statement/markings)

&"Arial,Bold"&8OSHKOSH DEFENSE, LLC – JLTV LRIP / FRP – W56HZV-15-C-0095 &F &G

&"Arial,Bold"&8OSHKOSH DEFENSE, LLC – JLTV LRIP / FRP – W56HZV-15-C-0095 &F &G

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

&"-,Bold"&14FOR OFFICIAL USE ONLY (FOUO) &P

P-BL

Title (MFR_(MTC or RSV)_IBOM_YYYY.MM.DD
IndentureOEM Part NoOEM Item NameOEM CAGEQTYRevisionDrawing NoDWG CAGEFind No.DWG. NomenclatureNSNNSN NomenclatureNext Higher Assembly No.NHA CAGEVendor/Alternate PNVendor/Alternate CAGEMFR/Supplier PNMFR/Supplier CAGEMFR AddressMFR WebsiteSoftware/Firmware VersionComponent TypeProvisioning StatusAlternate ForItem ClassItem TypeSourcesLead TimeSotck On HandEOLRecommended Replacement ItemCost SourceMake or BuyCostExtended Cost
AXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
AXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
BXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
BXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
CXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
CXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
DXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
DXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
EXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
EXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
FXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
FXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
GXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
GXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
HXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
HXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
IXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
IXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
JXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
JXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
KXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
KXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
LXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
LXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
MXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
MXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
NXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
NXXXXXXXXXXXXXXXXXXXXXXXXXXX-XX-XXX-XXXX
Distribution Statement A. Approved for Public Release; distribution is unlimited. PEO GSC OPSEC# OPSEC-2026-275

(*Distribution Statement A only applies when form is not filled in. Once filled check the Security Class Guide for proper distribution statement/markings)

Sheet1

Hardware - ASIC
Hardware - FPGA
Hardware - ROM
Hardware - SRAM
Hardware - Oscillator
Hardware - Digital Signal Processor
Hardware - Printed Circuit Board
Hardware - Microprocessor
Hardware - Microcontroller
Hardware - Flash
Hardware - DRAM
Hardware - Data Converter
Hardware - Interface Chips
Hardware - Amplifier or Comparator
Hardware - PLD
Hardware - Logic ASSP
Hardware - Analog ASSP
Hardware - General Purpose Logic
Hardware - Line Replaceable Unit (LRU)
Software - Operating System
Software - Application/Program
Software - Database
Software - RICEW Objects
Software - Tool (e.g., Library, Compiler, etc.)
Firmware
Service - Please Explain
Other - Please Explain
Approved for Public Release

File details come from the government source that posted it. Updated .