ASP Addendum No 0009 - Notice to Bidders.doc
DOC document 69 KB Posted
- Attached to
- Construction of an Ammunitions Supply Point Facility Federal contract opportunity
- Solicitation number
- W911YP-09-B-0002
About this file
A-E's Notice to Bidders information.
View the file
Other files for this federal contract opportunity
Show all 35
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Addendum No. X UTARNG Ammunition Supply Point
10 Sept 09
Tech Specialist: Bob Seipold (Omaha)
2009/9/10
ADDENDUM NO. 0009
TO
CONTRACT DOCUMENTS AND SPECIFICATIONS
FOR
Ammunition Supply Point Camp W.G. Williams
DATE OF ISSUE: 11 September, 2009
TO: PROSPECTIVE BIDDERS AND OTHER INTERESTED PARTIES
THE CONTRACT DOCUMENTS AND SPECIFICATIONS, INCLUDING THE CONTRACT DRAWINGS, ARE HEREBY MODIFIED BY THE FOLLOWING ITEMS:
CHANGES TO SPECIFICATIONS
AD-X Item 1 SECTION 01330 – Submittals A. INSERT the following to Paragraph 2.1.K:
"Contractor shall prepare a fully conforming set of as-built redline drawings within 2 weeks of the completion of the project to the contracting officer. The CO will review the set and provide comments and the contractor shall resubmit incorporating any comments into the redline set. Further, the contractor shall submit a disk with GIS located utility information to the contracting officer within 2 weeks of completion of the project. The files on the disk shall conform to the following standards:
ASP GIS Format
UTM NAD 1983 Zone 12N
GIS Data .shp file
Coordinate with the contracting officer for applicable ASP GIS Format information prior to submission."
AD-X Item 2
SECTION 01360 –ACCIDENT PREVENTION
A. INSERT the section in its entirety to the division 1 specification
AD-X Item 3
SECTION 02930 – SEEDING AND LANDSCAPING
A. Paragraph 2.1.A.1 – INSERT Table Titled “Utah National Guard Seed Mix”:
B. Paragraph 2.1.A.2- INSERT “Contractor shall submit temporary seed mix in accordance with Utah Department of Transportation standards”
AD-X Item 4 SECTION 08315 – Sliding Blast Resistant Door
A. DELETE Existing Section 08315 and REPLACE with attached 08315
AD-X Item 5
SECTION 13121- METAL BUILDING SYSTEMS
A. Paragraph 2.5.A.a.1- DELETE SSCP SP-6 reference and replace with SSCP SP-2.
B. Paragraph 2.5.A.b.4 - DELETE entire sentence and REPLACE with “Manufacturers standard shop applied primer accordance with US Federal Specification TT-P-636.”
C. Refer to 2.3.A for liner panel finish D. Paragraph 2.3.F.1.c.1.a – REPLACE with “Factory applied prime coat in accordance with US Federal Specification TT-P-636.”
E. Paragraph 2.3.F.2.c.1.a – REPLACE with “Factory applied prime coat in accordance with US Federal Specification TT-P-636.”
F. Paragraph 2.5.A.7.b.2 – REPLACE with “Paint “finish coats” in accordance with Section 09904.”
AD-X Item 6 SECTION 15970 – HVAC Controls and Instrumentation A. Paragraph 2.1.A.2 – DELETE the following:
“a. Texas Analytical Controls Inc. (TAC), Sole Source”
B Paragraph 2.1.A.2 – ADD the Following:
“a. TAC INet Controls, Sole Source”
AD-X Item 7
SECTION 16782- VIDEO SURVEILLANCE/CCTV
A. Paragraph 2.2.A.1.A – DELETE “Bosch” and “Panasonic” , ADD “Pelco, SOLE SOURCE”.
B. Paragraph 2.2.A.1.A –ADD “Cisco, SOLE SOURCE (Media Converter Components Only) Contact Shawn Heiden for more information on specific component requirements 801 455-0141”.
ALL ITEMS IN CONFLICT WITH THE ADDENDA ARE HEREBY DELETED.
THIS ADDENDUM IS MADE PART OF THE CONTRACT DOCUMENTS AND SHALL BE NOTED ON THE PROPOSAL.
HDR ENGINEERING, INC.
Greg Martinez, P.E.
File details come from the government source that posted it. Updated .