A02_Attachment_4_Field_Maintenance_Manual.xlsx

XLSX spreadsheet 28 KB Posted

Attached to
Award Notice for The Next General Chemical Detector 1 (NGCD1), Aerosol & Vapor Chemical Agent Detector (AVCAD) 541712
Solicitation number
W911SR-17-R-0005
Issued by

About this file

From the source

Field Maintenance Manual

View the file

Other files

File Type Posted
Government_Response_10_May.pdf PDF
NGCD1_AVCAD_Amendment__27_April_2018.pdf PDF
A07_Attachment_9_Cost_Template_Feb_2018_.xlsx XLSX spreadsheet
Attachment_4_-_40051-2C_TABLE_A-IV_TM_3-6665-441-23_and_P.XLSX XLSX spreadsheet
Attachment_3_-_40051-2C_TABLE_A-II_TM_3-6665-441-10.xlsx XLSX spreadsheet
Attachment_11_-_DDForm254_AVCAD_17_Aug_17_Signed.pdf PDF
Attachment_9_7th_BETA_NGCD_1_Cost_Template,_.xlsx XLSX spreadsheet
Attachment_12_-_Past_Performance_Questionnaire_01_Aug_2017_.docx DOCX document
Attachment_10_-_Small_Business_Participation_Proposa_01_Aug_2017_l.docx DOCX document
EXHIBIT_A_AVCAD_CDRLs_19_Sep_2017.pdf PDF
Attachment_5_-_40051-2C_TABLE_A-III_TM_3-6665-441-40.xlsx XLSX spreadsheet
Attachment_1_-_AVCAD_Performance_Specification_29AUG2017.pdf PDF
W911SR-17-R-0005_RFP_NGCD1_AVCAD_21_Sep_2017.pdf PDF
Attachment_2_-_AVCAD_Logistics_Product_Data_Selection_Worksheet.pdf PDF
NGCD_1_Technical_Slides.pptx PPTX presentation
NGCD_1_FPI(S)_Basics.pdf PDF
Government_response_to_Questions_27_July_2017.pdf PDF
CDRLs_5_Jul_2017.pdf PDF
A02_Attachment_9_Cost_Template.xlsx XLSX spreadsheet
A02_SECTION_L_5_July.pdf PDF
Attachment_1_Pspec_29JUN2017.pdf PDF
A02_Attachment_3_Operator's_Maintenance_Manual_.xlsx XLSX spreadsheet
B02_Section_M_7_July.pdf PDF
A02_Attachment_2_-_Logistics_Product_Data_Selection_Worksheet.pdf PDF
Draft_RFP.pdf PDF
A02_Section_B_30_June_2017.xlsx XLSX spreadsheet
A02_Attachment_10_Small_Business_Participation_Proposal_(Sample_Format).pdf PDF
A02Attachment_5_Depot_Maintenance_Manual.xlsx XLSX spreadsheet
Government_Response.pdf PDF
Government_Response.pdf PDF
13-Draft_AVCAD_section_L_2017420.pdf PDF
NGCD1_AVCAD_Questions_and_Responses.xlsx XLSX spreadsheet
13-Draft_AVCAD_section_L_2017420.pdf PDF
17-Draft_AVCAD_Section_M_20170420.pdf PDF
5-Attachment_1_-_Draft_AVCAD_Performance_Specification_20_Apr_2017.pdf PDF
4-Draft_AVCAD_Section_C_-_PWS_20170420.pdf PDF
Show all 36

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

-23&P

https://www.logsa.army.mil/mil40051/matrix2_chg4.cfm
TABLE A-IV.

Combined maintenance and maintenance with parts requirements matrix for

TM 3-6665-441-23&P

TM Content‑23MIL‑STD‑40051-2CElement Name
‑23&PReference
FRONT MATTERR5.2.1<paper.frnt>
Front coverR5.2.1.1<frntcover>
(MC) Promulgation letterTBD5.2.1.3<promulgation>
Warning summaryTBD5.2.1.4<warnsum>
Change transmittal pageTBD5.2.1.5<chgsheet>
List of effective pages/work packagesR5.2.1.6<loepwp>
Title pageR5.2.1.7<titleblk>
Table of contentsR5.2.1.9<contents>
How to use this manualR5.2.1.10<howtouse>
CHAPTER 1.RAPPENDIX B<gim>
GENERAL INFORMATION, Equipment DESCRIPTION, AND THEORY OF OPERATION
GENERAL INFORMATION WORK PACKAGERB.5.2<ginfowp>
ScopeRB.5.2.3<scope>
Maintenance forms, records, and reportsRB.5.2.4<mfrr>
Reporting Equipment Improvement Recommendations (EIR)RB.5.2.5<eir>
Hand Receipt (HR) informationTBDB.5.2.6<handreceipt>
Corrosion Prevention and Control (CPC)RB.5.2.7<cpcdata>
Ozone Depleting Substances (ODS)TBDB.5.2.8<odsdata>
Destruction of Army materiel to prevent enemy useRB.5.2.9<destructmat>
Preparation for storage or shipmentRB.5.2.10<pssref>
Transportability guidanceRB.5.2.11<transportability>
Warranty informationTBDB.5.2.12<wrntyref>
Nomenclature cross‑reference listTBDB.5.2.13<nomenreflist>
List of abbreviationsRB.5.2.14<loa>
Quality of materialRB.5.2.16<qual.mat.info>
Safety, care, and handlingTBDB.5.2.17<sftyinfo>
Nuclear hardnessTBDB.5.2.18<hcp>
CalibrationTBDB.5.2.19<calref>
Item unique identification (IUID)TBDB.5.2.20<iuid>
Supporting information for repair parts, special tools, TMDE, and support equipmentTBDB.5.2.27<supdata>
Copyright credit lineTBDB.5.2.28<copyrt>
EQUIPMENT DESCRIPTION AND DATA WORK PACKAGERB.5.3<descwp>
Equipment characteristics, capabilities, and featuresRB.5.3.3<eqpinfo>
Location and description of major componentsRB.5.3.4<locdesc>
Equipment differencesRB.5.3.5<eqpdiff>
Equipment dataRB.5.3.6<eqpdata>
THEORY OF OPERATION WORK PACKAGERB.5.4<thrywp>
CHAPTER X.TBDAPPENDIX D<tim>
TROUBLESHOOTINGD.5.4.4<masterindexcategory>
MASTER INDEX
TROUBLESHOOTING INDEX WORK PACKAGERD.5.5.5<tsindxwp>
CHAPTER X.RAPPENDIX D<tim>
TROUBLESHOOTING PROCEDURESD.5.4.2<troublecategory>
NOTE
The notation (*) indicates that at least one of the these content items shall be included
INTRODUCTION WORK PACKAGETBDD.5.5.3<tsintrowp>
TROUBLESHOOTING INDEX WORK PACKAGETBDD.5.5.5<tsindxwp>
*OPERATIONAL CHECKOUT WORK PACKAGESTBDD.5.5.8.3<opcheckwp>
*TROUBLESHOOTING WORK PACKAGESTBDD.5.5.8.4<tswp>
*COMBINED OPERATIONAL CHECKOUT AND TROUBLESHOOTING WORK PACKAGESTBDD.5.5.8.5<opcheck‑tswp>
CHAPTER X.TBDAPPENDIX E<mim>
PMCSE.5.2.1<pmcscategory>
MAINTENANCE INSTRUCTIONS
NOTE
PMCS may be in its own chapter or may be combined with other maintenance work packages in a maintenance chapter but not both places.
PMCS INTRODUCTION WORK PACKAGERE.5.3.4.1<pmcsintrowp>
PMCS, INCLUDING LUBRICATIONRE.5.3.4.2<pmcswp>
INSTRUCTIONS, WORK PACKAGE
CHAPTER X.RAPPENDIX E<mim>
MAINTENANCE INSTRUCTIONSE.5.2.2<maintenancepmcscategory>
NOTEE.5.2.3<maintenancecategory>
PMCS may be in its own chapter or may be combined with other maintenance work packages in a maintenance chapter but not both places.
SERVICE UPON RECEIPT WORK PACKAGETBDE.5.3.2<surwp>
Service upon receipt tasksTBDE.5.3.2.3<surtsk>
SitingTBDE.5.3.2.3.1<siting>
Shelter requirementsTBDE.5.3.2.3.2<shltr>
Service upon receipt of materielTBDE.5.3.2.3.3<surmat>
Installation instructionsTBDE.5.3.2.3.4<install>
Preliminary servicing of equipmentTBDE.5.3.2.3.5<preserv>
Preliminary checks and adjustment of equipmentTBDE.5.3.2.3.6<prechkadj>
Preliminary calibration of equipmentTBDE.5.3.2.3.7<precal>
Circuit alignmentTBDE.5.3.2.3.8<calign>
Ammunition markingsTBDE.5.3.2.3.9.1<mark>
Classification of defectsTBDE.5.3.2.3.9.2<ammo.defect>
Ammunition handlingTBDE.5.3.2.3.9.3<ammo.handling>
Procedures to activate ammunitionTBDE.5.3.2.3.9.4<arm>
Additional service upon receipt taskTBDE.5.3.2.3.10<other.surtsk>
Follow-on maintenanceTBDE.5.3.2.3.11<followon.maintsk>
EQUIPMENT/USER FITTING INSTRUCTIONS WORK PACKAGETBDE.5.3.3<perseqpwp>
PMCS INTRODUCTION WORK PACKAGETBDE.5.3.4.1<pmcsintrowp>
PMCS WORK PACKAGETBDE.5.3.4.2<pmcswp>
MAINTENANCE WORK PACKAGESRE.5.3.5<maintwp>
Maintenance tasksRE.5.3.5.3<maintsk>
InspectTBDE.5.3.5.3.2<inspect>
TestTBDE.5.3.5.3.3<test>
ServiceTBDE.5.3.5.3.4<service>
AdjustTBDE.5.3.5.3.5<adjust>
AlignTBDE.5.3.5.3.6<align>
CalibrateTBDE.5.3.5.3.7<calibration>
RemoveTBDE.5.3.5.3.8<remove>
InstallTBDE.5.3.5.3.9<install>
ReplaceTBDE.5.3.5.3.10<replace>
RepairTBDE.5.3.5.3.11<repair>
PaintTBDE.5.3.5.3.12<paint>
OverhaulTBDE.5.3.5.3.13<overhaul>
RebuildTBDE.5.3.5.3.14<rebuild>
LubricateTBDE.5.3.5.3.15<lube>
MarkTBDE.5.3.5.3.16<mark>
PackTBDE.5.3.5.3.17<pack>
UnpackTBDE.5.3.5.3.18<unpack>
PreserveTBDE.5.3.5.3.19<preservation>
Prepare for useTBDE.5.3.5.3.20<prepforuse>
AssembleTBDE.5.3.5.3.21<assem>
DisassembleTBDE.5.3.5.3.22<disassem>
CleanTBDE.5.3.5.3.23<clean>
Nondestructive inspectionTBDE.5.3.5.3.24<ndi>
Radio interference suppressionTBDE.5.3.5.3.25<ris>
Place in serviceTBDE.5.3.5.3.26<pis>
TowingTBDE.5.3.5.3.27<tow>
JackingTBDE.5.3.5.3.28<jack>
ParkingTBDE.5.3.5.3.29<park>
MooringTBDE.5.3.5.3.30<moor>
CoveringTBDE.5.3.5.3.31<cover>
HoistingTBDE.5.3.5.3.32<hoist>
Sling loadingTBDE.5.3.5.3.33<sling>
External powerTBDE.5.3.5.3.34<extpwr>
Preparation for storageRE.5.3.5.3.35<prepstore>
Preparation for shipmentRE.5.3.5.3.36<prepship>
TransportRE.5.3.5.3.37<transport>
ArmTBDE.5.3.5.3.38<arm>
LoadTBDE.5.3.5.3.39<load>
UnloadTBDE.5.3.5.3.40<unload>
Install peripheral deviceTBDE.5.3.5.3.41<installperdev>
Uninstall peripheral deviceTBDE.5.3.5.3.42<uninstallperdev>
Upgrade/patch softwareTBDE.5.3.5.3.43<upgrade>
Configure softwareTBDE.5.3.5.3.44<configure>
Debug softwareTBDE.5.3.5.3.45<debug>
Additional maintenance taskTBDE.5.3.5.3.46<other.maintsk>
Follow-on maintenanceTBDE.5.3.5.3.47<followon.maintsk>
GENERAL MAINTENANCE WORK PACKAGETBDE.5.3.7<gen.maintwp>
LUBRICATION INSTRUCTIONS WORK PACKAGETBDE.5.3.8<lubewp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGETBDE.5.3.10
Illustrated list of manufactured items introduction work packageRE.5.3.10.1<manu_items_introwp>
Manufacturing procedures work packageRE.5.3.10.2<manuwp>
TORQUE LIMITS WORK PACKAGETBDE.5.3.11<torquewp>
WIRING DIAGRAMS WORK PACKAGETBDE.5.3.12<wiringwp>
CHAPTER X.TBDAPPENDIX E<mim>
AUXILIARY EQUIPMENTTBDE.5.2.6<auxiliarycategory>
MAINTENANCE INSTRUCTIONSTBD
AUXILIARY EQUIPMENT MAINTENANCE WORK PACKAGETBDE.5.3.14<auxeqpwp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGETBDE.5.3.10
Illustrated list of manufactured items introduction work packageRE.5.3.10.1<manu_items_introwp>
Manufacturing procedures work packageRE.5.3.10.2<manuwp>
TORQUE LIMITS WORK PACKAGETBDE.5.3.11<torquewp>
WIRING DIAGRAMS WORK PACKAGETBDE.5.3.12<wiringwp>
CHAPTER X.TBDAPPENDIX E<mim>
AMMUNITIONTBDE.5.2.7<ammunitioncategory>
MAINTENANCE INSTRUCTIONSTBD
AMMUNITION MAINTENANCE WORK PACKAGETBDE.5.3.15.1<ammowp>
AMMUNITION MARKING INFORMATION WORK PACKAGETBDE.5.3.15.2<ammo.markingwp>
FOREIGN AMMUNITION (NATO) WORK PACKAGETBDE.5.3.15.3<natowp>
CHAPTER X.TBDAPPENDIX H<dim>
DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USETBD
NOTETBD
If a separate destruction of material manual is not developed for this equipment, then the destruction chapter must be included.TBD
Destruction PROCEDURES introduction work packageRH.5.3<destruct-introwp>
Authority to destroyRH.5.3.3<authorize_to_destroy>
Reporting destructionRH.5.3.4<report_destruct>
General destruction informationRH.5.3.5<general_destruct_info>
Degree of destructionRH.5.3.6<degree_of_destruct>
Essential components and spare partsH.5.3.7<component_spares>
DESTRUCTION WORK PACKAGERH.5.4<destruct-materialwp>
Parts listTBDH.5.4.3<essential_spares>
Specific destruction proceduresRH.5.4.4<proc>
SOFTWARE INFORMATIONTBDAppendix M<soim>
<softwarecategory>
SOFTWARE GENERAL INFORMAtiON WORK PACKAGERM.5.3.1<softginfowp>
System OverviewRM.5.3.1.6<softsysover>
Document OverviewRM.5.3.1.7<softdocover>
software summary work packageRM.5.3.2<softsumwp>
software effectivity work packageTBDM.5.3.3<softeffectwp>
differences between software versions work packageTBDM.5.3.4<softdiffversionwp>
features and capaiblities work packageM.5.4.1<softfeaturescapwp>
R
screen displays work packageRM.5.4.2<softscreendisplaywp>
menus/directories work packageRM.5.4.3<softmenuwp>
tools and buttons work packagesRM.5.4.4<softtoolswp>
security and privacy procedures work packageRM.5.5.1<softsecprivwp>
supervisory controls work packageTBDM.5.5.2<softsuperctrlswp>
powerup/startup and powerdown/shutdown procedures work packageRM.5.5.3<softpowerupwp>
accessing/exiting software work packageRM.5.5.4<softaccesswp>
key commands work packageTBDM.5.5.5<softkeycmdswp>
processes and commands work packageTBDM.5.5.6<softproccmdwp>
user interface work packageTBDM.5.5.7<softguiwp>
Software OPERATING conventions work packageTBDM.5.5.8<softopconventionswp>
Additional software operation wpTBDM.5.5.9<softgenwp>
messages work packageTBDM.5.6.3<softmessageswp>
recovery from errors, malfunctions, and emergencies work packageTBDM.5.6.4<softerrorswp>
CHAPTER X.APPENDIX F<pim>
RPSTL
P
(–23&P)R
Introduction work packageRF.5.3.5<introwp>
Repair parts list work packageRF.5.3.6<plwp>
Repair parts for special tools work packageTBDF.5.3.7<stl_partswp>
Kit parts list work packageTBDF.5.3.8<kitswp>
bulk Item Work PackageTBDF.5.3.9<bulk_itemswp>
Special tools list work packageTBDF.5.3.10<stlwp>
NSN index work packageRF.5.3.11.1<nsnindxwp>
P/N index work packageRF.5.3.11.2<pnindxwp>
Reference designator index work packageTBDF.5.3.11.3<refdesindxwp>
CHAPTER X.RAPPENDIX G<sim>
SUPPORTING INFORMATION
NOTE
Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.
REFERENCES WORK PACKAGERG.5.2<refwp>
INTRODUCTION FOR NON-AVIATION TWO-LEVEL MAC WORK PACKAGERG.5.3.1<macintrowp>
NON-AVIATION TWO-LEVEL MAC WORK PACKAGERG.5.3.3<macwp>
EXPENDABLE AND DURABLE ITEMS WORK PACKAGERG.5.7<explistwp>
TOOL IDENTIFICATION LIST WORK PACKAGERG.5.8<toolidwp>
MANDATORY REPLACEMENT PARTS WORK PACKAGERG.5.9<mrplwp>
CRITICAL SAFETY ITEMS WORK PACKAGERG.5.10<csi.wp>
SUPPORT ITEMS WORK PACKAGETBDG.5.11<supitemwp>
ADDITIONAL SUPPORTING WORK PACKAGESTBDG.5.12<genwp>
REAR MATTERR5.2.2<rear>
GlossaryTBD5.2.2.1<glossary>
Alphabetical indexTBD5.2.2.2<aindx>
DA Form 2028R5.2.2.3<da2028>
Authentication pageR5.2.2.4<authent>
Foldout pagesTBD5.2.2.5<foldsect>
Back coverR5.2.2.6<back>
Legend
TBD - To Be Determined
R - Required
P - Prohibited
blue - location in MIL-STD
green - XML tag

File details come from the government source that posted it. Updated .