TE-23 - UFGS 09 90 00 - Paintings and Coatings - 2021.pdf

USACE / NAVFAC / AFCEC UFGS- 09 90 00 ( Febr uar y 2021)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 09 90 00 ( May 2011)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2024

SECTI ON TABLE OF CONTENTS

DI VI SI ON 09 - FI NI SHES

SECTI ON 09 90 00

PAI NTS AND COATI NGS

02/ 21

PART 1 GENERAL

1. 1 RELATED REQUI REMENTS

1. 1. 1 Pai nt i ng I ncl uded

1. 1. 1. 1 Ext er i or Pai nt i ng

1. 1. 1. 2 I nt er i or Pai nt i ng

1. 1. 2 Pai nt i ng Excl uded

1. 1. 3 Mechani cal and El ect r i cal Pai nt i ng

1. 1. 3. 1 Fi r e Ext i ngui shi ng Spr i nkl er Syst ems

1. 1. 4 Ext er i or Pai nt i ng of Si t e Wor k I t ems

1. 1. 5 Mi scel l aneous Pai nt i ng

1. 1. 5. 1 Let t er i ng [ Bui l di ng ] [ Room Number ( s) ]

1. 1. 5. 2 Obst r uct i ons To Avi at i on

1. 2 REFERENCES

1. 3 DEFI NI TI ONS

1. 3. 1 Qual i f i cat i on Test i ng

1. 3. 2 Bat ch Qual i t y Conf or mance Test i ng

1. 3. 3 Coat i ng

1. 3. 4 DFT or df t

1. 3. 5 DSD

1. 3. 6 EXT

1. 3. 7 I NT

1. 3. 8 Loose Pai nt

1. 3. 9 mi cr on / mi cr ons

1. 3. 10 mi l / mi l s

1. 3. 11 mm

1. 3. 12 MPI Gl oss Level s

1. 3. 13 MPI Syst em Number

1. 3. 14 Pai nt

1. 3. 15 REX

1. 3. 16 RI N

1. 4 SCHEDULI NG

1. 5 SUBMI TTALS

1. 6 QUALI TY ASSURANCE

SECTI ON 09 90 00 Page 1

1. 6. 1 Regul at or y Requi r ement s

1. 6. 1. 1 Envi r onment al Pr ot ect i on

1. 6. 1. 2 Lead Cont ent

1. 6. 1. 3 Chr omat e Cont ent

1. 6. 1. 4 Asbest os Cont ent

1. 6. 1. 5 Mer cur y Cont ent

1. 6. 1. 6 Si l i ca

1. 6. 1. 7 Human Car ci nogens

1. 6. 1. 8 Car bon Based Fi ber s / Tubes

1. 6. 2 Coat i ng Cont r act or ' s Qual i f i cat i on

1. 6. 3 SSPC QP 1 Cer t i f i cat i on

1. 6. 4 Appr oved Pr oduct s Li st

1. 6. 5 Pai nt s and Coat i ngs I ndoor Ai r Qual i t y Cer t i f i cat i ons

1. 6. 6 Fi el d Sampl es and Test s

1. 6. 6. 1 Sampl i ng Pr ocedur e

1. 6. 6. 2 Test i ng Pr ocedur e

1. 6. 7 Text ur ed Wal l Coat i ng Syst em

1. 6. 8 Sampl e Text ur ed Wal l Coat i ng Syst em Mock- Up

1. 7 PACKAGI NG, LABELI NG, AND STORAGE

1. 8 SAFETY AND HEALTH

1. 8. 1 Toxi c Mat er i al s

1. 9 ENVI RONMENTAL REQUI REMENTS

1. 9. 1 Coat i ngs

1. 9. 2 Post - Appl i cat i on

PART 2 PRODUCTS

2. 1 MATERI ALS

2. 2 COLOR CODI NG FOR SHORE- TO SHI P UTI LI TY CONNECTI ONS

2. 3 COLOR SELECTI ON OF FI NI SH COATS

PART 3 EXECUTI ON

3. 1 PROTECTI ON OF AREAS AND SPACES NOT TO BE PAI NTED

3. 2 REPUTTYI NG AND REGLAZI NG

3. 3 RESEALI NG OF EXI STI NG EXTERI OR JOI NTS

3. 3. 1 Sur f ace Condi t i on

3. 3. 2 Backst ops

3. 3. 3 Pr i mer and Bond Br eaker

3. 3. 4 Ambi ent Temper at ur e

3. 3. 5 Ext er i or Seal ant

3. 3. 6 Cl eani ng

3. 4 SURFACE PREPARATI ON

3. 4. 1 Addi t i onal Requi r ement s f or Pr epar at i on of Sur f aces Wi t h

Exi st i ng Coat i ngs

3. 4. 2 Exi st i ng Coat ed Sur f aces wi t h Mi nor Def ect s

3. 4. 3 Removal of Exi st i ng Coat i ngs

3. 4. 4 Subst r at e Repai r

3. 5 PREPARATI ON OF METAL SURFACES

3. 5. 1 Exi st i ng and New Fer r ous Sur f aces

3. 5. 2 Fi nal Fer r ous Sur f ace Condi t i on:

3. 5. 2. 1 Tool Cl eaned Sur f aces

3. 5. 2. 2 Abr asi ve Bl ast Cl eaned Sur f aces

3. 5. 2. 3 Wat er j et Cl eaned Sur f aces

3. 5. 3 Gal vani zed Sur f aces

3. 5. 4 Non- Fer r ous Met al l i c Sur f aces

3. 5. 5 Ter ne- Coat ed Met al Sur f aces

3. 5. 6 Exi st i ng Sur f aces wi t h a Bi t umi nous or Mast i c- Type Coat i ng

3. 6 PREPARATI ON OF CONCRETE AND CEMENTI TI OUS SURFACE

SECTI ON 09 90 00 Page 2

3. 6. 1 Concr et e and Masonr y

3. 6. 2 Gypsum Boar d, Pl ast er , and St ucco

3. 6. 2. 1 Sur f ace Cl eani ng

3. 6. 2. 2 Repai r of Mi nor Def ect s

3. 6. 2. 3 Al l owabl e Moi st ur e Cont ent

3. 6. 3 Exi st i ng Asbest os Cement Sur f aces

3. 7 PREPARATI ON OF WOOD AND PLYWOOD SURFACES

3. 7. 1 New[ , Exi st i ng Uncoat ed, ] [ and] [ Exi st i ng Coat ed] Pl ywood and

Wood Sur f aces, Except Fl oor s:

3. 7. 2 Wood Fl oor Sur f aces, Nat ur al Fi ni sh

3. 7. 3 I nt er i or Wood Sur f aces, St ai n Fi ni sh

3. 7. 4 Wat er Bl ast i ng of Exi st i ng Coat ed Wood Sur f aces:

3. 8 APPLI CATI ON

3. 8. 1 Coat i ng Appl i cat i on

3. 8. 2 Mi xi ng and Thi nni ng of Pai nt s

3. 8. 3 Two- Component Syst ems

3. 8. 4 Coat i ng Syst ems

3. 9 COATI NG SYSTEMS FOR METAL

3. 10 COATI NG SYSTEMS FOR CONCRETE AND CEMENTI TI OUS SUBSTRATES

3. 11 COATI NG SYSTEMS FOR WOOD AND PLYWOOD

3. 12 PI PI NG I DENTI FI CATI ON

3. 13 I NSPECTI ON AND ACCEPTANCE

3. 14 WASTE MANAGEMENT

3. 15 PAI NT TABLES

3. 15. 1 Ext er i or Pai nt Tabl es

3. 15. 1. 1 MPI Di v i s i on 3: Ext er i or Concr et e Pai nt Tabl e

3. 15. 1. 2 MPI Di v i s i on 4: Ext er i or Concr et e Masonr y Uni t s Pai nt

Tabl e

3. 15. 1. 3 MPI Di v i s i on 5: Ext er i or Met al , Fer r ous and Non- Fer r ous

Pai nt Tabl e

3. 15. 1. 4 MPI Di v i s i on 6: Ext er i or Wood; Dr essed Lumber , Panel i ng, Decki ng, Shi ngl es Pai nt Tabl e

3. 15. 1. 5 MPI Di v i s i on 9: Ext er i or St ucco Pai nt Tabl e

3. 15. 1. 6 MPI Di v i s i on 10: Ext er i or Cl ot h Cover i ngs and Bi t umi nous

Coat ed Sur f aces Pai nt Tabl e

3. 15. 2 I nt er i or Pai nt Tabl es

3. 15. 2. 1 MPI Di v i s i on 3: I nt er i or Concr et e Pai nt Tabl e

3. 15. 2. 2 MPI Di v i s i on 4: I nt er i or Concr et e Masonr y Uni t s Pai nt

Tabl e

3. 15. 2. 3 MPI Di v i s i on 5: I nt er i or Met al , Fer r ous and Non- Fer r ous

Pai nt Tabl e

3. 15. 2. 4 MPI Di v i s i on 6: I nt er i or Wood Pai nt Tabl e

3. 15. 2. 5 MPI Di v i s i on 9: I nt er i or Pl ast er , Gypsum Boar d, Text ur ed

Sur f aces Pai nt Tabl e

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 09 90 00 Page 3

USACE / NAVFAC / AFCEC UFGS- 09 90 00 ( Febr uar y 2021)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 09 90 00 ( May 2011)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2024

SECTI ON 09 90 00

PAI NTS AND COATI NGS

02/ 21

NOTE: Thi s gui de speci f i cat i on cover s t he r equi r ement s f or pai nt i ng of new and exi st i ng, i nt er i or and ext er i or subst r at es, i ncl udi ng masonr y, concr et e, met al , wood, and ot her mi scel l aneous mat er i al s.

Adher e t o UFC 1- 300- 02 Uni f i ed Faci l i t i es Gui de Speci f i cat i ons ( UFGS) For mat St andar d when edi t i ng t hi s gui de speci f i cat i on or pr epar i ng new pr oj ect speci f i cat i on sect i ons. Edi t t hi s gui de speci f i cat i on f or pr oj ect speci f i c r equi r ement s by addi ng, del et i ng, or r evi s i ng t ext . For br acket ed i t ems, choose appl i cabl e i t em( s) or i nser t appr opr i at e i nf or mat i on.

Remove i nf or mat i on and r equi r ement s not r equi r ed i n r espect i ve pr oj ect , whet her or not br acket s ar e pr esent .

Comment s, suggest i ons and r ecommended changes f or t hi s gui de speci f i cat i on ar e wel come and shoul d be submi t t ed as a Cr i t er i a Change Request ( CCR) .

NOTE: Thi s gui de speci f i cat i on i ncl udes t ai l or i ng f or ARMY and NAVY pr oj ect s, and f or I NTERI OR and EXTERI OR pai nt i ng. Wher e an Edi t or ' s Not e st at es a par agr aph i s t ai l or ed f or a Ser vi ce or pai nt i ng t ype, t he cont ent of t he par agr aph, or a por t i on of t he par agr aph, i s sui t ed speci f i cal l y t o be i ncl uded onl y f or t hat Ser vi ce or pai nt i ng t ype.

NOTE: Thi s Gui de Speci f i cat i on i s used i n t he pr epar at i on of pr oj ect speci f i cat i ons f or Depar t ment of Def ense f aci l i t i es:

1. Bui l di ngs;

SECTI ON 09 90 00 Page 4

2. Rel at ed mechani cal , el ect r i cal , and mi scel l aneous i t ems; and

3. Shor e- t o- shi p ut i l i t y connect i ons.

Thi s gui de speci f i cat i on has been pr epar ed t o addr ess t he r equi r ement s of r out i ne mai nt enance pai nt i ng when modi f i ed t o i ncl ude or ut i l i ze mai nt enance opt i ons.

Thi s gui de speci f i cat i on DOES NOT addr ess hi gh- per f or mance or speci al t y coat i ng r equi r ement s, or pr ot ect i ve coat i ng of i ndust r i al st r uct ur es or f aci l i t i es, i ncl udi ng but not l i mi t ed t o:

1. Tower s;

2. Pi l i ngs;

3. Pavement mar ki ngs;

4. I t ems r equi r i ng speci al i zed t r eat ment due t o pecul i ar usage;

5. Pet r ol eum st or age f aci l i t i es;

6. Wat er st or age f aci l i t i es;

7. Wat er f r ont f aci l i t i es, except shor e- t o- shi p ut i l i t y connect i ons; and

8. Hangar s

I f such i t ems ar e i n t he pr oj ect i ncl ude i n a separ at e sect i on or modi f y t hi s sect i on accor di ngl y. The f ol l owi ng gui de speci f i cat i ons ar e exampl es of t hose avai l abl e f or speci f i c ser vi ce condi t i ons not ed, and may be modi f i ed t o pr ovi de f or r el at ed ser vi ce condi t i ons:

1. Sect i on 09 97 23 METALLI C TYPE CONDUCTI VE/ SPARK RESI STANT CONCRETE FLOOR FI NI SH. Thi s speci f i cat i on cover s t he r equi r ement s f or met al l i c t ype conduct i ve/ spar k r esi st ant concr et e f l oor f i ni sh f or or dnance and ot her s i mi l ar st r uct ur es.

2. Sect i on 09 97 02 PAI NTI NG: HYDRAULI C STRUCTURES. Thi s speci f i cat i on cover s t he pai nt i ng of hydr aul i c st r uct ur es l ocat ed i n f r esh wat er such as l ocks and dams.

3. Sect i on 09 97 13. 27 HI GH PERFORMANCE COATI NG FOR STEEL STRUCTURES. Thi s speci f i cat i on i s usabl e f or any st eel st r uct ur e exposed t o weat her , and i s usabl e f or ot her pur poses as wel l , such as hangar st r uct ur es, encl osed swi mmi ng pool st r uct ur es, and most s i t uat i ons r equi r i ng hi gh- per f or mance pr ot ect i ve coat i ng syst ems.

4. Sect i on 09 97 13. 16 I NTERI OR COATI NG OF WELDED STEEL WATER TANKS. Thi s gui de speci f i cat i on cover s t he r equi r ement s f or pol yami de epoxy coat i ng syst em f or i nt er i or of newl y const r uct ed Navy and Ai r For ce wat er t anks, pot abl e and non- pot abl e, wher e shop appl i ed coat i ngs ar e not bei ng consi der ed.

Thi s gui de speci f i cat i on gener al l y cont ai ns onl y t wo t ypes of coat i ng syst ems, sol vent based and wat er

SECTI ON 09 90 00 Page 5 based. I f di f f er ent syst ems ar e r equi r ed r egi onal l y, or f or speci al needs, modi f y t he gui de accor di ngl y.

PART 1 GENERAL

1. 1 RELATED REQUI REMENTS

NOTE: I ndi cat e t ype and ext ent of wor k on dr awi ngs. Speci f i c quant i t i es shoul d not be ci t ed i n t he speci f i cat i on. I ndi cat e on t he dr awi ngs t he l i near amount of exi st i ng put t y, gl azi ng compound, seal ant or caul k i ng t o be r epl aced wi t h new mat er i al and quant i f y t he ar ea of exi st i ng coat i ng t o be r emoved by met hods speci f i ed f or each subst r at e mat er i al .

1. 1. 1 Pai nt i ng I ncl uded

Wher e a space or sur f ace i s i ndi cat ed t o be pai nt ed, i ncl ude t he f ol l owi ng unl ess i ndi cat ed ot her wi se.

a. Sur f aces behi nd por t abl e obj ect s and sur f ace mount ed ar t i c l es r eadi l y det achabl e by r emoval of f ast ener s, such as scr ews and bol t s.

b. New f act or y f i ni shed sur f aces t hat r equi r e i dent i f i cat i on or col or codi ng and f act or y f i ni shed sur f aces t hat ar e damaged dur i ng per f or mance of t he wor k.

c. Exi st i ng coat ed sur f aces t hat ar e damaged dur i ng per f or mance of t he wor k.

1. 1. 1. 1 Ext er i or Pai nt i ng

NOTE: The f ol l owi ng subpar agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h ext er i or pai nt i ng.

Choose br acket ed i t ems accor di ng t o scope of pr oj ect .

I ncl udes new sur f aces[ , exi st i ng coat ed sur f aces, ] [ and ] [ exi st i ng uncoat ed sur f aces, ] of t he bui l di ng[ s] and appur t enances. Al so i ncl uded ar e exi st i ng coat ed sur f aces made bar e by c l eani ng oper at i ons.

1. 1. 1. 2 I nt er i or Pai nt i ng

NOTE: The f ol l owi ng subpar agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h i nt er i or pai nt i ng.

Choose br acket ed i t ems accor di ng t o scope of pr oj ect .

I ncl udes new sur f aces[ , exi st i ng uncoat ed sur f aces, ] [ and ] [ exi st i ng coat ed sur f aces] of t he bui l di ng[ s] and appur t enances as i ndi cat ed and

SECTI ON 09 90 00 Page 6 exi st i ng coat ed sur f aces made bar e by c l eani ng oper at i ons. Wher e a space or sur f ace i s i ndi cat ed t o be pai nt ed, i ncl ude t he f ol l owi ng i t ems, unl ess i ndi cat ed ot her wi se.

a. Exposed col umns, gi r der s, beams, j oi st s, and met al deck; and

b. Ot her cont i guous sur f aces.

1. 1. 2 Pai nt i ng Excl uded

Do not pai nt t he f ol l owi ng unl ess i ndi cat ed ot her wi se.

a. Sur f aces conceal ed and made i naccessi bl e by panel boar ds, f i xed duct wor k, machi ner y, and equi pment f i xed i n pl ace.

b. Sur f aces i n conceal ed spaces. Conceal ed spaces ar e def i ned as encl osed spaces above suspended cei l i ngs, f ur r ed spaces, at t i c spaces, cr awl spaces, el evat or shaf t s and chases.

c. St eel t o be embedded i n concr et e.

d. Copper , st ai nl ess st eel , al umi num, anodi zed al umi num, br ass, and l ead except exi st i ng coat ed sur f aces.

e. Har dwar e, f i t t i ngs, and ot her f act or y f i ni shed i t ems.

[ f . Do not pai nt sur f aces i n t he f ol l owi ng ar eas: [ _____] .

] 1. 1. 3 Mechani cal and El ect r i cal Pai nt i ng

NOTE: Choose br acket ed i t ems i n par agr aph bel ow accor di ng t o scope of pr oj ect .

I ncl udes f i el d coat i ng of [ i nt er i or ] [ and ] [ ext er i or ] new[ and exi st i ng] sur f aces.

a. Wher e a space or sur f ace i s i ndi cat ed t o be pai nt ed, i ncl ude t he f ol l owi ng i t ems unl ess i ndi cat ed ot her wi se.

( 1) Exposed pi pi ng, condui t , and duct wor k;

( 2) Suppor t s, hanger s, ai r gr i l l es, and r egi st er s;

( 3) Mi scel l aneous met al wor k and i nsul at i on cover i ngs.

[ b. Do not pai nt t he f ol l owi ng, unl ess i ndi cat ed ot her wi se:

[ ( 1) New zi nc- coat ed, al umi num, and copper sur f aces under i nsul at i on

] [ ( 2) New al umi num j acket on pi pi ng

] [ ( 3) New i nt er i or f er r ous pi pi ng under i nsul at i on.

] ] [ 1. 1. 3. 1 Fi r e Ext i ngui shi ng Spr i nkl er Syst ems

Cl ean, pr et r eat , pr i me, and pai nt new f i r e ext i ngui shi ng spr i nkl er syst ems i ncl udi ng val ves, pi pi ng, condui t , hanger s, suppor t s, mi scel l aneous

SECTI ON 09 90 00 Page 7 met al wor k, and accessor i es. Appl y coat i ngs t o c l ean, dr y sur f aces, usi ng cl ean br ushes.

] [ 1. 1. 4 Ext er i or Pai nt i ng of Si t e Wor k I t ems

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h ext er i or pai nt i ng.

I nser t l i s t of Si t e Wor k I t ems t o be pai nt ed i n t abl e bel ow, such as hand r ai l s, f i r e ext i ngui shi ng syst ems, door s.

Fi el d coat t he f ol l owi ng i t ems:

New Sur f aces Exi st i ng Sur f aces a.

b.

c.

] 1. 1. 5 Mi scel l aneous Pai nt i ng

1. 1. 5. 1 Let t er i ng [ Bui l di ng ] [ Room Number ( s) ]

Pr ovi de l et t er i ng [ as schedul ed on t he dr awi ngs] [ bl ock] [ Got hi c] t ype, [ bl ack enamel ] [ wat er - t ype decal comani a, f i ni shed wi t h a pr ot ect i ve coat i ng of spar var ni sh] . Sampl es must be appr oved bef or e appl i cat i on.

[ 1. 1. 5. 2 Obst r uct i ons To Avi at i on

NOTE: Speci f y by name st r uct ur es such as smokest acks, pol es, and bui l di ngs whi ch have been i dent i f i ed as obst r uct i on t o avi at i on. Ver i f y t hat t he st r uct ur es so i dent i f i ed ar e not speci f i ed t o be pai nt ed i n t he sect i ons speci f y i ng t he st r uct ur es so t hat pai nt i ng wi l l not be speci f i ed t wi ce.

Coor di nat e wi t h FAA f or al t er nat e col or s and pat t er ns.

Pai nt t he f ol l owi ng obst r uct i ons t o avi at i on i n t he pat t er n and col or pr escr i bed by FAA AC 70/ 7460- 1: [ smokest acks] [ pol es] [ bui l di ngs] [ _____]

] 1. 2 REFERENCES

NOTE: Thi s par agr aph i s used t o l i s t t he publ i cat i ons c i t ed i n t he t ext of t he gui de speci f i cat i on. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y and l i s t ed i n t hi s par agr aph by or gani zat i on, desi gnat i on, dat e, and t i t l e.

SECTI ON 09 90 00 Page 8

Use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e when you add a Ref er ence I dent i f i er ( RI D) out si de of t he Sect i on' s Ref er ence Ar t i c l e t o aut omat i cal l y pl ace t he r ef er ence i n t he Ref er ence Ar t i c l e. Al so use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e t o updat e t he i ssue dat es.

Ref er ences not used i n t he t ext wi l l aut omat i cal l y be del et ed f r om t hi s sect i on of t he pr oj ect speci f i cat i on when you choose t o r econci l e r ef er ences i n t he publ i sh pr i nt pr ocess.

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN CONFERENCE OF GOVERNMENTAL I NDUSTRI AL HYGI ENI STS ( ACGI H)

ACGI H 0100 ( 2017; Suppl 2020) Document at i on of t he Thr eshol d Li mi t Val ues and Bi ol ogi cal Exposur e I ndi ces

AMERI CAN SOCI ETY OF MECHANI CAL ENGI NEERS ( ASME)

ASME A13. 1 ( 2023) Scheme f or t he I dent i f i cat i on of Pi pi ng Syst ems

ASTM I NTERNATI ONAL ( ASTM)

ASTM C920 ( 2018) St andar d Speci f i cat i on f or El ast omer i c Joi nt Seal ant s

ASTM D235 ( 2002; R 2012) Mi ner al Spi r i t s ( Pet r ol eum Spi r i t s) ( Hydr ocar bon Dr y Cl eani ng Sol vent )

ASTM D523 ( 2014; R 2018) St andar d Test Met hod f or Specul ar Gl oss

ASTM D2824/ D2824M ( 2018) St andar d Speci f i cat i on f or Al umi num- Pi gment ed Asphal t Roof Coat i ngs, Non- Fi ber ed, and Fi ber ed wi t hout Asbest os

ASTM D4214 ( 2007; R 2015) St andar d Test Met hod f or Eval uat i ng t he Degr ee of Chal k i ng of Ext er i or Pai nt Fi l ms

ASTM D4263 ( 1983; R 2018) St andar d Test Met hod f or I ndi cat i ng Moi st ur e i n Concr et e by t he Pl ast i c Sheet Met hod

ASTM D4444 ( 2013; R 2018) St andar d Test Met hod f or Labor at or y St andar di zat i on and Cal i br at i on of Hand- Hel d Moi st ur e Met er s

ASTM D6386 ( 2016a) St andar d Pr act i ce f or Pr epar at i on of Zi nc ( Hot - Di p Gal vani zed) Coat ed I r on and St eel Pr oduct and Har dwar e Sur f aces f or Pai nt i ng

SECTI ON 09 90 00 Page 9

ASTM F1869 ( 2023) St andar d Test Met hod f or Measur i ng Moi st ur e Vapor Emi ssi on Rat e of Concr et e Subf l oor Usi ng Anhydr ous Cal ci um Chl or i de

CENTERS FOR DI SEASE CONTROL AND PREVENTI ON ( CDC)

I nt el l i gence Bul l et i n 65 ( 2013) Occupat i onal Exposur e t o Car bon Nanot ubes and Nanof i ber s

MASTER PAI NTERS I NSTI TUTE ( MPI )

MPI 1 ( 2012) Al umi num Pai nt

MPI 2 ( 2012) Al umi num Heat Resi st ant Enamel ( up t o 427 C and 800 F

MPI 3 ( 2016) Pr i mer , Al kal i Resi st ant , Wat er Based

MPI 4 ( 2016) I nt er i or / Ext er i or Lat ex Bl ock Fi l l er

MPI 5 ( 2015) Pr i mer , Ext er i or Al kyd Wood

MPI 6 ( 2015) Pr i mer , Ext er i or Lat ex Wood

MPI 8 ( 2016) Al kyd, Ext er i or Fl at ( MPI Gl oss Level I )

MPI 9 ( 2016) Al kyd, Ext er i or Gl oss ( MPI Gl oss Level 6)

MPI 10 ( 2016) Lat ex, Ext er i or Fl at ( MPI Gl oss Level 1)

MPI 11 ( 2016) Lat ex, Ext er i or Semi - Gl oss, MPI Gl oss Level 5

MPI 13 ( 2016) St ai n, Ext er i or Sol vent - Based, Semi - Tr anspar ent

MPI 16 ( 2016) St ai n, Ext er i or , Wat er Based, Sol i d Hi de

MPI 17 ( 2016) Pr i mer , Bondi ng, Wat er Based

MPI 19 ( 2012) Pr i mer , Zi nc Ri ch, I nor gani c

MPI 21 ( 2012) Heat Resi st ant Coat i ng, ( Up t o 205° C/ 402° F) , MPI Gl oss Level 6

MPI 22 ( 2012) Al umi num Pai nt , Hi gh Heat ( up t o 590° C/ 1100° F)

MPI 23 ( 2015) Pr i mer , Met al , Sur f ace Tol er ant

MPI 27 ( 2016) Fl oor Enamel , Al kyd, Gl oss ( MPI Gl oss Level 6)

SECTI ON 09 90 00 Page 10

MPI 31 ( 2012) Var ni sh, Pol yur et hane, Moi st ur e Cur ed, Gl oss ( MPI Gl oss Level 6)

MPI 38 ( 2016) El ast omer i c Coat i ng, Ext er i or , Wat er Based, Non- Fl at

MPI 39 ( 2018) Pr i mer , Lat ex, f or I nt er i or Wood

MPI 42 ( 2012) Text ur ed Coat i ng, Lat ex, Fl at

MPI 44 ( 2016) Lat ex, I nt er i or , ( MPI Gl oss Level 2)

MPI 45 ( 2016) Pr i mer Seal er , I nt er i or Al kyd

MPI 46 ( 2016) Under coat , Enamel , I nt er i or

MPI 47 ( 2016) Al kyd, I nt er i or , Semi - Gl oss ( MPI Gl oss Level 5)

MPI 48 ( 2016) Al kyd, I nt er i or , Gl oss ( MPI Gl oss Level 6- 7)

MPI 49 ( 2015) Al kyd, I nt er i or , Fl at ( MPI Gl oss Level 1)

MPI 50 ( 2015) Pr i mer Seal er , Lat ex, I nt er i or

MPI 51 ( 2016) Al kyd, I nt er i or , ( MPI Gl oss Level

3) 2

MPI 52 ( 2016) Lat ex, I nt er i or , ( MPI Gl oss Level 3)

MPI 54 ( 2016) Lat ex, I nt er i or , Semi - Gl oss ( MPI Gl oss Level 5)

MPI 56 ( 2012) Var ni sh, I nt er i or , Pol yur et hane, Oi l Modi f i ed, Gl oss

MPI 57 ( 2012) Var ni sh, I nt er i or , Pol yur et hane, Oi l Modi f i ed, Sat i n

MPI 59 ( 2016) Fl oor Pai nt , Al kyd, Low Gl oss

MPI 60 ( 2016) Fl oor Pai nt , Lat ex, Low Gl oss

MPI 68 ( 2016) Fl oor Pai nt , Lat ex, Gl oss

MPI 71 ( 2012) Var ni sh, Pol yur et hane, Moi st ur e Cur ed, Fl at ( MPI Gl oss Level 1)

MPI 72 ( 2016) Pol yur et hane, Two- Component , Pi gment ed, Gl oss ( MPI Gl oss Level 6- 7)

MPI 76 ( 2016) Pr i mer , Al kyd, Qui ck Dr y, f or Met al

MPI 77 ( 2015) Epoxy, Gl oss

MPI 79 ( 2016) Pr i mer , Al kyd, Ant i - Cor r osi ve f or Met al

SECTI ON 09 90 00 Page 11

MPI 90 ( 2012) St ai n, Semi - Tr anspar ent , f or I nt er i or Wood

MPI 94 ( 2016) Al kyd, Ext er i or , Semi - Gl oss ( MPI Gl oss Level 5)

MPI 95 ( 2015) Pr i mer , Qui ck Dr y, f or Al umi num

MPI 101 ( 2016) Pr i mer , Epoxy, Ant i - Cor r osi ve, f or Met al

MPI 107 ( 2016) Pr i mer , Rust - I nhi bi t i ve, Wat er Based

MPI 108 ( 2015) Epoxy, Hi gh Bui l d, Low Gl oss

MPI 113 ( 2018) El ast omer i c, Pi gment ed, Ext er i or , Wat er Based, Fl at

MPI 116 ( 2012) Bl ock Fi l l er , Epoxy

MPI 119 ( 2016) Lat ex, Ext er i or , Gl oss ( MPI Gl oss Level 6)

MPI 120 ( 2020) Epoxy, Hi gh Bui l d, Sel f Pr i mi ng, Low Gl oss

MPI 134 ( 2015) Pr i mer , Gal vani zed, Wat er Based

MPI 138 ( 2016) Lat ex, I nt er i or , Hi gh Per f or mance Ar chi t ect ur al , ( MPI Gl oss Level 2)

MPI 139 ( 2016) Lat ex, I nt er i or , Hi gh Per f or mance Ar chi t ect ur al , ( MPI Gl oss Level 3)

MPI 140 ( 2016) Lat ex, I nt er i or , Hi gh Per f or mance Ar chi t ect ur al , ( MPI Gl oss Level 4)

MPI 141 ( 2016) Lat ex, I nt er i or , Hi gh Per f or mance Ar chi t ect ur al , Semi - Gl oss ( MPI Gl oss Level 5)

MPI 144 ( 2016) Lat ex, I nt er i or , I nst i t ut i onal Low Odor / VOC, ( MPI Gl oss Level 2)

MPI 145 ( 2016) Lat ex, I nt er i or , I nst i t ut i onal Low Odor / VOC, ( MPI Gl oss Level 3)

MPI 146 ( 2016) Lat ex, I nt er i or , I nst i t ut i onal Low Odor / VOC, ( MPI Gl oss Level 4)

MPI 147 ( May 2016) Lat ex, I nt er i or , I nst i t ut i onal Low Odor / VOC, Semi - Gl oss ( MPI Gl oss Level 5)

MPI 149 ( 2016) Pr i mer Seal er , I nt er i or , I nst i t ut i onal Low Odor / VOC

MPI 151 ( 2016) Li ght I ndust r i al Coat i ng, I nt er i or , SECTI ON 09 90 00 Page 12

Wat er Based ( MPI Gl oss Level 3)

MPI 153 ( 2016) Li ght I ndust r i al Coat i ng, I nt er i or , Wat er Based, Semi - Gl oss ( MPI Gl oss Level 5)

MPI 154 ( 2016) Li ght I ndust r i al Coat i ng, I nt er i or , Wat er Based, Gl oss ( MPI Gl oss Level 6)

MPI 161 ( 2016) Li ght I ndust r i al Coat i ng, Ext er i or , Wat er Based ( MPI Gl oss Level 3)

MPI 163 ( 2016) Li ght I ndust r i al Coat i ng, Ext er i or , Wat er Based, Semi - Gl oss ( MPI Gl oss Level 5)

MPI 164 ( 2016) Li ght I ndust r i al Coat i ng, Ext er i or , Wat er Based, Gl oss ( MPI Gl oss Level 6)

MPI 177 ( 2020) Epoxy, Semi - Gl oss ( MPI Gl oss Level 5)

MPI 214 ( 2016) Lat ex, Ext er i or ( MPI Gl oss Level 2)

MPI ASM ( 2019) Ar chi t ect ur al Pai nt i ng Speci f i cat i on Manual

MPI GPS- 1- 14 ( 2014) Gr een Per f or mance St andar d GPS- 1- 14

MPI GPS- 2- 14 ( 2014) Gr een Per f or mance St andar d GPS- 2- 14

MPI MRM ( 2015) Mai nt enance Repai nt i ng Manual

SOCI ETY FOR PROTECTI VE COATI NGS ( SSPC)

SSPC 7/ NACE No. 4 ( 2007) Br ush- Of f Bl ast Cl eani ng

SSPC Gl ossar y ( 2011) SSPC Pr ot ect i ve Coat i ngs Gl ossar y

SSPC Gui de 6 ( 2021) Gui de f or Cont ai ni ng Sur f ace Pr epar at i on Debr i s Gener at ed Dur i ng Pai nt Removal Oper at i ons

SSPC Gui de 7 ( 2015) Gui de t o t he Di sposal of Lead- Cont ami nat ed Sur f ace Pr epar at i on Debr i s

SSPC PA 1 ( 2016) Shop, Fi el d, and Mai nt enance Coat i ng of Met al s

SSPC QP 1 ( 2019) St andar d Pr ocedur e f or Eval uat i ng t he Qual i f i cat i ons of I ndust r i al / Mar i ne Pai nt i ng Cont r act or s ( Fi el d Appl i cat i on t o Compl ex I ndust r i al St eel St r uct ur es and Ot her Met al Component s)

SSPC SP 1 ( 2015) Sol vent Cl eani ng

SSPC SP 2 ( 2018) Hand Tool Cl eani ng

SSPC SP 3 ( 2018) Power Tool Cl eani ng

SECTI ON 09 90 00 Page 13

SSPC SP 6/ NACE No. 3 ( 2007) Commer ci al Bl ast Cl eani ng

SSPC SP 10/ NACE No. 2 ( 2015) Near - Whi t e Bl ast Cl eani ng

SSPC VI S 1 ( 2002; E 2004) Gui de and Ref er ence Phot ogr aphs f or St eel Sur f aces Pr epar ed by Dr y Abr asi ve Bl ast Cl eani ng

SSPC VI S 3 ( 2004) Gui de and Ref er ence Phot ogr aphs f or St eel Sur f aces Pr epar ed by Hand and Power Tool Cl eani ng

SSPC VI S 4/ NACE VI S 7 ( 1998; E 2000; E 2004) Gui de and Ref er ence Phot ogr aphs f or St eel Sur f aces Pr epar ed by Wat er j et t i ng

SSPC- SP WJ- 1/ NACE WJ- 1 ( 2012) Cl ean t o Bar e Subst r at e, Wat er j et Cl eani ng of Met al s

SSPC- SP WJ- 2/ NACE WJ- 2 ( 2012) Ver y Thor ough Cl eani ng, Wat er j et Cl eani ng of Met al s

SSPC- SP WJ- 3/ NACE WJ- 3 ( 2012) Thor ough Cl eani ng, Wat er j et Cl eani ng of Met al s

SSPC- SP WJ- 4/ NACE WJ- 4 ( 2012) Li ght Cl eani ng, Wat er j et Cl eani ng of Met al s

SOCI ETY OF AUTOMOTI VE ENGI NEERS I NTERNATI ONAL ( SAE)

SAE AMS- STD- 595A ( 2017) Col or s used i n Gover nment Pr ocur ement

U. S. ARMY CORPS OF ENGI NEERS ( USACE)

EM 385- 1- 1 ( 2024) Saf et y - - Saf et y and Heal t h Requi r ement s Manual

U. S. DEPARTMENT OF DEFENSE ( DOD)

MI L- PRF- 680 ( 2010; Rev C; Not i ce 1 2015) Degr easi ng Sol vent

MI L- STD- 101 ( 2014; Rev C) Col or Code f or Pi pel i nes and f or Compr essed Gas Cyl i nder s

U. S. ENVI RONMENTAL PROTECTI ON AGENCY ( EPA)

EPA Met hod 24 ( 2000) Det er mi nat i on of Vol at i l e Mat t er Cont ent , Wat er Cont ent , Densi t y, Vol ume Sol i ds, and Wei ght Sol i ds of Sur f ace Coat i ngs

U. S. FEDERAL AVI ATI ON ADMI NI STRATI ON ( FAA)

FAA AC 70/ 7460- 1 ( 2016; Rev L; Change 2) Obst r uct i on Mar ki ng and Li ght i ng

SECTI ON 09 90 00 Page 14

U. S. GENERAL SERVI CES ADMI NI STRATI ON ( GSA)

FED- STD- 313 ( 2018) Mat er i al Saf et y Dat a, Tr anspor t at i on Dat a and Di sposal Dat a f or Hazar dous Mat er i al s Fur ni shed t o Gover nment Act i v i t i es

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

29 CFR 1910. 1000 Ai r Cont ami nant s

29 CFR 1910. 1001 Asbest os

29 CFR 1910. 1025 Lead

29 CFR 1926. 62 Lead

1. 3 DEFI NI TI ONS

1. 3. 1 Qual i f i cat i on Test i ng

Qual i f i cat i on t est i ng i s t he per f or mance of al l t est r equi r ement s l i s t ed i n t he pr oduct speci f i cat i on. Thi s t est i ng i s accompl i shed by MPI t o qual i f y each pr oduct f or t he MPI Appr oved Pr oduct Li st , and may al so be accompl i shed by Cont r act or ' s t hi r d- par t y t est i ng l ab i f an al t er nat i ve t o Bat ch Qual i t y Conf or mance Test i ng by MPI i s desi r ed.

1. 3. 2 Bat ch Qual i t y Conf or mance Test i ng

Bat ch qual i t y conf or mance t est i ng det er mi nes t hat t he pr oduct pr ovi ded i s t he same as t he pr oduct qual i f i ed t o t he appr opr i at e pr oduct speci f i cat i on. Thi s t est i ng must be accompl i shed by an MPI t est i ng l ab.

1. 3. 3 Coat i ng

SSPC Gl ossar y; ( 1) A l i qui d, l i quef i abl e, or mast i c composi t i on t hat i s conver t ed t o a sol i d pr ot ect i ve, decor at i ve, or f unct i onal adher ent f i l m af t er appl i cat i on as a t hi n l ayer ; ( 2) Gener i c t er m f or pai nt , l acquer , enamel .

1. 3. 4 DFT or df t

Dr y f i l m t hi ckness, t he f i l m t hi ckness of t he f ul l y cur ed, dr y pai nt or coat i ng.

1. 3. 5 DSD

Degr ee of Sur f ace Degr adat i on, t he MPI syst em of def i ni ng degr ee of sur f ace degr adat i on. Fi ve l evel s ar e gener i cal l y def i ned under t he Assessment sect i ons i n t he MPI MRM, MPI Mai nt enance Repai nt i ng Manual .

1. 3. 6 EXT

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h ext er i or pai nt i ng.

MPI shor t t er m desi gnat i on f or an ext er i or coat i ng syst em.

SECTI ON 09 90 00 Page 15

1. 3. 7 I NT

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h i nt er i or pai nt i ng.

MPI shor t t er m desi gnat i on f or an i nt er i or coat i ng syst em.

1. 3. 8 Loose Pai nt

Pai nt or coat i ng t hat can be r emoved wi t h a dul l put t y kni f e.

1. 3. 9 mi cr on / mi cr ons

The met r i c measur ement f or 0. 001 mm or one one- t housandt h of a mi l l i met er .

1. 3. 10 mi l / mi l s

The Engl i sh measur ement f or 0. 001 i n or one one- t housandt h of an i nch.

1. 3. 11 mm

The met r i c measur ement f or mi l l i met er , 0. 001 met er or one one- t housandt h of a met er .

1. 3. 12 MPI Gl oss Level s

MPI syst em of def i ni ng gl oss. Seven gl oss l evel s ( G1 t o G7) ar e gener i cal l y def i ned under t he Eval uat i on sect i ons of t he MPI Manual s.

Tr adi t i onal l y, Fl at r ef er s t o G1/ G2, Eggshel l r ef er s t o G3, Semi gl oss r ef er s t o G5, and Gl oss r ef er s t o G6.

Gl oss l evel s ar e def i ned by MPI as f ol l ows:

Gl oss Level Descr i pt i on Uni t s at 60 degr ee angl e

Uni t s at 80 degr ee angl e

G1 Mat t e or Fl at 0 t o 5 10 max

G2 Vel vet 0 t o 10 10 t o 35

G3 Eggshel l 10 t o 25 10 t o 35

G4 Sat i n 20 t o 35 35 mi n

G5 Semi - Gl oss 35 t o 70

G6 Gl oss 70 t o 85

G7 Hi gh Gl oss

Gl oss i s t est ed i n accor dance wi t h ASTM D523. Hi st or i cal l y, t he Gover nment has used Fl at ( G1 / G2) , Eggshel l ( G3) , Semi - Gl oss ( G5) , and Gl oss ( G6) .

SECTI ON 09 90 00 Page 16

1. 3. 13 MPI Syst em Number

The MPI coat i ng syst em number i n each MPI Di v i s i on f ound i n ei t her t he MPI Ar chi t ect ur al Pai nt i ng Speci f i cat i on Manual or t he Mai nt enance Repai nt i ng Manual and def i ned as an ext er i or ( EXT/ REX) or i nt er i or syst em ( I NT/ RI N) .

1. 3. 14 Pai nt

SSPC Gl ossar y; ( 1) Any pi gment ed l i qui d, l i quef i abl e, or mast i c composi t i on desi gned f or appl i cat i on t o a subst r at e i n a t hi n l ayer t hat i s conver t ed t o an opaque sol i d f i l m af t er appl i cat i on. Used f or pr ot ect i on, decor at i on, i dent i f i cat i on, or t o ser ve some ot her f unct i onal pur poses; ( 2) Appl i cat i on of a coat i ng mat er i al .

1. 3. 15 REX

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h ext er i or pai nt i ng.

MPI shor t t er m desi gnat i on f or an ext er i or coat i ng syst em used i n r epai nt i ng pr oj ect s or over exi st i ng coat i ng syst ems.

1. 3. 16 RI N

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n pr oj ect s wi t h i nt er i or pai nt i ng.

MPI shor t t er m desi gnat i on f or an i nt er i or coat i ng syst em used i n r epai nt i ng pr oj ect s or over exi st i ng coat i ng syst ems.

1. 4 SCHEDULI NG

NOTE: Thi s Ar t i c l e i s t ai l or ed f or i ncl usi on i n NAVY pr oj ect s onl y.

Mat er i al s t hat adsor b VOCs i ncl ude car pet s, t ext i l es, unpr i med gypsum wal l boar d, and acoust i cal cei l i ng panel s. Add any of t hese mat er i al s t hat ar e i ncl uded i n t he pr oj ect and ot her adsor bi ng mat er i al s i nt o t he empt y br acket .

Al l ow pai nt , pol yur et hane, var ni sh, and wood st ai n i nst al l at i ons t o cur e pr i or t o t he i nst al l at i on of mat er i al s t hat adsor b VOCs, i ncl udi ng[ car pet s, ] [ t ext i l es, ] [ unpr i med gypsum wal l boar d, ] [ acoust i cal cei l i ng panel s, ] [ _____] .

1. 5 SUBMI TTALS

NOTE: Revi ew Submi t t al Descr i pt i on ( SD) def i ni t i ons i n Sect i on 01 33 00 SUBMI TTAL PROCEDURES and edi t t he f ol l owi ng l i s t , and cor r espondi ng submi t t al i t ems i n t he t ext , t o r ef l ect onl y t he submi t t al s

SECTI ON 09 90 00 Page 17 r equi r ed f or t he pr oj ect . The Gui de Speci f i cat i on t echni cal edi t or s have cl assi f i ed t hose i t ems t hat r equi r e Gover nment appr oval , due t o t hei r compl exi t y or cr i t i cal i t y, wi t h a " G. " Gener al l y, ot her submi t t al i t ems can be r evi ewed by t he Cont r act or ' s Qual i t y Cont r ol Syst em. Onl y add a " G" t o an i t em i f t he submi t t al i s suf f i c i ent l y i mpor t ant or compl ex i n cont ext of t he pr oj ect .

For Ar my pr oj ect s, f i l l i n t he empt y br acket s f ol l owi ng t he " G" c l assi f i cat i on, wi t h a code of up t o t hr ee char act er s t o i ndi cat e t he appr ovi ng aut hor i t y. Codes f or Ar my pr oj ect s usi ng t he Resi dent Management Syst em ( RMS) ar e: " AE" f or Ar chi t ect - Engi neer ; " DO" f or Di st r i ct Of f i ce ( Engi neer i ng Di v i s i on or ot her or gani zat i on i n t he Di st r i ct Of f i ce) ; " AO" f or Ar ea Of f i ce; " RO" f or Resi dent Of f i ce; and " PO" f or Pr oj ect Of f i ce. Codes f ol l owi ng t he " G" t ypi cal l y ar e not used f or Navy and Ai r For ce pr oj ect s.

The " S" c l assi f i cat i on i ndi cat es submi t t al s r equi r ed as pr oof of compl i ance f or sust ai nabi l i t y Gui di ng Pr i nci pl es Val i dat i on or Thi r d Par t y Cer t i f i cat i on and as descr i bed i n Sect i on 01 33 00 SUBMI TTAL

PROCEDURES.

Choose t he f i r st br acket ed i t em f or Navy and Ai r For ce pr oj ect s, or choose t he second br acket ed i t em f or Ar my pr oj ect s.

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e [ f or Cont r act or Qual i t y Cont r ol appr oval . ] [ f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

Sampl es of speci f i ed mat er i al s may be t aken and t est ed f or compl i ance wi t h speci f i cat i on r equi r ement s.

SD- 02 Shop Dr awi ngs

Pi pi ng I dent i f i cat i on

SD- 03 Pr oduct Dat a

Coat i ng; G[ , [ _____] ]

Pr oduct Dat a Sheet s

Seal ant

SD- 04 Sampl es

Col or ; G[ , [ _____] ]

Text ur ed Wal l Coat i ng Syst em; G[ , [ _____] ]

SECTI ON 09 90 00 Page 18

[ Sampl e Text ur ed Wal l Coat i ng Syst em Mock- Up; G[ , [ _____] ]

] SD- 07 Cer t i f i cat es

Qual i f i cat i on Test i ng l abor at or y f or coat i ngs; G[ , [ _____] ]

I ndoor Ai r Qual i t y f or Pai nt s and Pr i mer s

[ I ndoor Ai r Qual i t y f or Consol i dat ed Lat ex Pai nt s

] SD- 08 Manuf act ur er ' s I nst r uct i ons

Appl i cat i on I nst r uct i ons

Mi xi ng

Manuf act ur er ' s Saf et y Dat a Sheet s

SD- 10 Oper at i on and Mai nt enance Dat a

Coat i ngs, Dat a Package 1; G[ , [ _____] ]

1. 6 QUALI TY ASSURANCE

1. 6. 1 Regul at or y Requi r ement s

1. 6. 1. 1 Envi r onment al Pr ot ect i on

I n addi t i on t o r equi r ement s speci f i ed el sewher e f or envi r onment al pr ot ect i on, pr ovi de coat i ng mat er i al s t hat conf or m t o t he r est r i ct i ons of t he l ocal Ai r Pol l ut i on Cont r ol Di st r i ct and r egi onal j ur i sdi ct i on.

Not i f y Cont r act i ng Of f i cer of any pai nt speci f i ed her ei n whi ch f ai l s t o conf or m.

1. 6. 1. 2 Lead Cont ent

Do not use coat i ngs havi ng a l ead cont ent over 0. 06 per cent by wei ght of nonvol at i l e cont ent .

1. 6. 1. 3 Chr omat e Cont ent

Do not use coat i ngs cont ai ni ng zi nc- chr omat e or st r ont i um- chr omat e.

1. 6. 1. 4 Asbest os Cont ent

Pr ovi de asbest os- f r ee mat er i al s.

1. 6. 1. 5 Mer cur y Cont ent

Pr ovi de mat er i al s f r ee of mer cur y or mer cur y compounds.

1. 6. 1. 6 Si l i ca

Pr ovi de abr asi ve bl ast medi a cont ai ni ng no f r ee cr yst al l i ne s i l i ca.

1. 6. 1. 7 Human Car ci nogens

Pr ovi de mat er i al s t hat do not cont ai n ACGI H 0100 conf i r med human

SECTI ON 09 90 00 Page 19 car ci nogens ( A1) or suspect ed human car ci nogens ( A2) .

1. 6. 1. 8 Car bon Based Fi ber s / Tubes

Mat er i al s must not cont ai n car bon based f i ber s such as car bon nanot ubes or car bon nanof i ber s. I nt el l i gence Bul l et i n 65 r anks t oxi c i t y of car bon nanot ubes on a par wi t h asbest os.

NOTE: Sel ect onl y one of t he f ol l owi ng t wo br acket ed par agr aphs.

[ 1. 6. 2 Coat i ng Cont r act or ' s Qual i f i cat i on

NOTE: When usi ng t he Cont r act or qual i f i cat i on c l ause r at her t han t he SSPC Cer t i f i cat i on r equi r ement s, edi t t o r equi r e appr opr i at e exper i ence.

NOTE: I nser t st r uct ur e t ype compar abl e t o t hose bei ng pai nt ed i n br acket s.

Submi t t he name, addr ess, t el ephone number , and e- mai l addr ess of t he Cont r act or t hat wi l l be per f or mi ng al l sur f ace pr epar at i on and coat i ng appl i cat i on. Submi t evi dence t hat key per sonnel have successf ul l y per f or med sur f ace pr epar at i on and appl i cat i on of coat i ngs on [ _____] on a mi ni mum of t hr ee si mi l ar pr oj ect s wi t hi n t he past t hr ee year s. Li st i nf or mat i on by i ndi v i dual and i ncl ude t he f ol l owi ng:

a. Name of i ndi v i dual and pr oposed posi t i on f or t hi s wor k.

b. I nf or mat i on about each pr evi ous assi gnment i ncl udi ng:

Posi t i on or r esponsi bi l i t y

Empl oyer ( i f ot her t han t he Cont r act or )

Name of f aci l i t y owner

Mai l i ng addr ess and t el ephone number of f aci l i t y owner

Name of i ndi v i dual i n f aci l i t y owner ' s or gani zat i on who can be cont act ed as a r ef er ence

Locat i on, s i ze and descr i pt i on of st r uct ur e

Dat es wor k was car r i ed out

Descr i pt i on of wor k car r i ed out on st r uct ur e

] [ 1. 6. 3 SSPC QP 1 Cer t i f i cat i on

NOTE: For pr oj ect s i n cont i nent al U. S. , Hawai i , Al aska, and Puer t o Ri co, r equi r e SSPC

SECTI ON 09 90 00 Page 20

Cer t i f i cat i on. Use i n ot her l ocat i ons wher e qual i f i ed U. S. Cont r act or i s desi r ed. I f pr oj ect i nvol ves r emoval of pai nt cont ai ni ng hazar dous mat er i al s, add r equi r ement f or SSPC QP 2 cer t i f i cat i on i n sect i on of speci f i cat i on wher e t he hazar dous pai nt r emoval i s speci f i ed, gener al l y Sect i on 02 83 00 LEAD REMEDI ATI ON.

NOTE: * * WARNI NG* * WARNI NG* * WARNI NG* * WARNI NG* *

Sol i c i t at i ons r equi r i ng SSPC Cer t i f i cat i on must poi nt out t he exi st ence and l ocat i on of t he cer t i f i cat i on r equi r ement , i n t he Pr oj ect I nf or mat i on For m. To be enf or ceabl e, i ncl ude t he r equi r ement i n t he sol i c i t at i on document s. SSPC Cer t i f i cat i on i s a speci al r esponsi bi l i t y r equi r ement pur suant t o FAR 9. 104- 2 Speci al St andar ds. Thi s i s anal ogous t o r equi r i ng bi dder s t o have a speci f i ed l evel of exper i ence or exper t i se and GAO has sust ai ned t hese t ypes of speci al r equi r ement s.

NOTE: Use br acket opt i on bel ow concer ni ng SSPC QP 1 onl y when i ndust r i al coat i ngs ar e r equi r ed.

Pai nt i ng qual i f i cat i ons f or pr oj ect s such as BEQ' s, t r ai ni ng f aci l i t i es and gener al admi ni st r at i on bui l di ngs do not r equi r e QP 1 cer t i f i cat i on.

Cont r act or s t hat per f or m sur f ace pr epar at i on or coat i ng appl i cat i on on st eel subst r at es must be cer t i f i ed by t he Soci et y f or Pr ot ect i ve Coat i ngs ( f or mer l y St eel St r uct ur es Pai nt i ng Counci l ) ( SSPC) t o t he r equi r ement s of SSPC QP 1 pr i or t o Cont r act awar d, and must r emai n cer t i f i ed whi l e accompl i shi ng any sur f ace pr epar at i on or coat i ng appl i cat i on. I f a Cont r act or ' s cer t i f i cat i on expi r es, t he f i r m wi l l not be al l owed t o per f or m any wor k unt i l t he cer t i f i cat i on i s r ei ssued. Request s f or ext ensi on of t i me f or any del ay t o t he compl et i on of t he pr oj ect due t o an i nact i ve cer t i f i cat i on wi l l not be consi der ed. Not i f y t he Cont r act i ng Of f i cer of any change i n Cont r act or cer t i f i cat i on st at us. Not i f y t he Cont r act i ng Of f i cer of al l schedul ed and unannounced on- si t e audi t s f r om SSPC and f ur ni sh a copy of al l audi t r epor t s.

] 1. 6. 4 Appr oved Pr oduct s Li st

The cur r ent MPI , " Appr oved Pr oduct Li st " whi ch l i s t s pai nt by br and, l abel , pr oduct name and pr oduct code as of t he dat e of Cont r act awar d, wi l l be used t o det er mi ne compl i ance wi t h t he submi t t al r equi r ement s of t hi s speci f i cat i on. The Cont r act or may choose t o use a subsequent MPI " Appr oved Pr oduct Li st " , however , onl y one l i s t may be used f or t he ent i r e Cont r act and each coat i ng syst em i s t o be f r om a si ngl e manuf act ur er .

Pr ovi de al l coat s on a par t i cul ar subst r at e f r om a si ngl e manuf act ur er .

No var i at i on f r om t he MPI Appr oved Pr oduct s Li st i s accept abl e.

1. 6. 5 Pai nt s and Coat i ngs I ndoor Ai r Qual i t y Cer t i f i cat i ons

SECTI ON 09 90 00 Page 21

NOTE: The Gover nment s ' s pr ef er ence i s f or use of pr oduct s t hat have been cer t i f i ed f or i ndoor ai r qual i t y by a t hi r d- par t y or gani zat i on such as MPI ' s MPI GPS- 1- 14 and MPI GPS- 2- 14 Gr een Per f or mance St andar ds. Resear ch has shown t hat al l pai nt s except consol i dat ed l at ex pai nt s ar e avai l abl e among t hr ee nat i onal manuf act ur er s. Ver i f y t her e i s a cer t i f i ed pr oduct avai l abl e when speci f y i ng consol i dat ed l at ex pai nt t hat i s bot h cost ef f ect i ve and appr opr i at e f or t he pr oj ect . Conf i r m l ocal / r egi onal avai l abi l i t y of cer t i f i ed pr oduct s when speci f y i ng consol i dat ed l at ex pai nt t hat does not i mpact cost ef f ect i veness.

Pr ovi de pai nt and coat i ng pr oduct s cer t i f i ed t o meet i ndoor ai r qual i t y r equi r ement s by MPI GPS- 1- 14, MPI GPS- 2- 14 or pr ovi de cer t i f i cat i on by ot her t hi r d- par t y pr ogr ams. Pr ovi de cur r ent pr oduct cer t i f i cat i on document at i on f r om cer t i f i cat i on body.

Pr ovi de cer t i f i cat i on of I ndoor Ai r Qual i t y f or Pai nt s and Pr i mer s.

[ Pr ovi de cer t i f i cat i on of I ndoor Ai r Qual i t y f or Consol i dat ed Lat ex Pai nt s.

] Submi t r equi r ed i ndoor ai r qual i t y cer t i f i cat i ons i n one submi t t al package.

1. 6. 6 Fi el d Sampl es and Test s

The Cont r act i ng Of f i cer may choose up t o t wo coat i ngs t hat have been del i ver ed t o t he s i t e t o be t est ed at no cost t o t he Gover nment . Take sampl es of each chosen pr oduct as speci f i ed i n t he par agr aph SAMPLI NG PROCEDURE. Test each chosen pr oduct as speci f i ed i n t he par agr aph TESTI NG PROCEDURE. Remove pr oduct s f r om t he j ob s i t e whi ch do not conf or m, and r epl ace wi t h new pr oduct s t hat conf or m t o t he r ef er enced speci f i cat i on.

Test r epl acement pr oduct s t hat f ai l ed i ni t i al t est i ng as speci f i ed i n t he par agr aph TESTI NG PROCEDURE at no cost t o t he Gover nment .

NOTE: The f ol l owi ng par agr aph i s t ai l or ed f or i ncl usi on i n ARMY pr oj ect s onl y.

Onl y r equi r e t he t est i ng f or l ar ge quant i t i es of epoxy/ pol yur et hane coat i ngs or a s i ngl e coat i ng syst em t hat i s used i n l ar ge quant i t i es on t he pr oj ect . A l ar ge quant i t y of epoxy/ pol yur et hane coat i ngs i s consi der ed t o be 189 Li t er s 50 gal l ons or mor e, a l ar ge quant i t y of ot her coat i ng syst ems i s consi der ed t o be 757 Li t er s 200 gal l ons or mor e.

Li st al l coat i ngs f or t est i ng by MPI or SSPC pai nt number i n t he f ol l owi ng par agr aph.

[ Anot her r equi r ed t est i ng i s Bat ch Qual i t y Conf or mance Test i ng t o pr ove conf or mance of t he manuf act ur er ' s pai nt t o t he speci f i ed MPI st andar d.

Thi s t est i ng i s accompl i shed bef or e t he mat er i al s ar e del i ver ed t o t he j ob s i t e. Pr ovi de t est i ng f or [ _____] pai nt pr oduct s. Test pai nt pr oduct s as speci f i ed i n t he par agr aph TESTI NG PROCEDURE.

SECTI ON 09 90 00 Page 22

1. 6. 6. 1 Sampl i ng Pr ocedur e

Sel ect pai nt at r andom f r om t he pr oduct s t hat have been del i ver ed t o t he j ob s i t e f or sampl e t est i ng. The Cont r act or must pr ovi de one l i t er one quar t sampl es of t he sel ect ed pai nt mat er i al s. Take sampl es i n t he pr esence of t he Cont r act i ng Of f i cer , and l abel , and i dent i f y each sampl e.

Pr ovi de l abel s i n accor dance wi t h t he par agr aph PACKAGI NG, LABELI NG, AND

STORAGE.

1. 6. 6. 2 Test i ng Pr ocedur e

Pr ovi de Bat ch Qual i t y Conf or mance Test i ng f or speci f i ed pr oduct s, as def i ned by and per f or med by MPI . As an al t er nat i ve t o Bat ch Qual i t y Conf or mance Test i ng, t he Cont r act or may pr ovi de Qual i f i cat i on Test i ng f or speci f i ed pr oduct s above t o t he appr opr i at e MPI pr oduct speci f i cat i on, usi ng t he t hi r d- par t y l abor at or y appr oved under t he par agr aph QUALI FI CATI ON TESTI NG l abor at or y f or coat i ngs. I ncl ude t he backup dat a and summar y of t he t est r esul t s wi t hi n t he qual i f i cat i on t est i ng l ab r epor t . Pr ovi de a summar y l i s t i ng of al l t he r ef er ence speci f i cat i on r equi r ement s and t he r esul t of each t est . Cl ear l y i ndi cat e i n t he summar y whet her t he t est ed pai nt meet s each t est r equi r ement . Not e t hat Qual i f i cat i on Test i ng may t ake 4 t o 6 weeks t o per f or m, due t o t he ext ent of t est i ng r equi r ed.

Submi t name, addr ess, t el ephone number , FAX number , and e- mai l addr ess of t he i ndependent t hi r d par t y l abor at or y sel ect ed t o per f or m t est i ng of coat i ng sampl es f or compl i ance wi t h speci f i cat i on r equi r ement s. Submi t document at i on t hat l abor at or y i s r egul ar l y engaged i n t est i ng of pai nt sampl es f or conf or mance wi t h speci f i cat i ons, and t hat empl oyees per f or mi ng t est i ng ar e qual i f i ed. I f MPI i s chosen t o per f or m t he Bat ch Qual i t y Conf or mance t est i ng, t he above submi t t al i nf or mat i on i s not r equi r ed, onl y a l et t er i s r equi r ed f r om t he Cont r act or st at i ng t hat MPI wi l l per f or m t he t est i ng.

1. 6. 7 Text ur ed Wal l Coat i ng Syst em

Thr ee compl et e sampl es of each i ndi cat ed t ype, pat t er n, and col or of t ext ur ed wal l coat i ng syst em appl i ed t o a panel of t he same mat er i al as t hat on whi ch t he coat i ng syst em wi l l be appl i ed i n t he wor k. Pr ovi de sampl es of wal l coat i ng syst ems mi ni mum 125 by 175 mm 5 by 7 i nches and of suf f i c i ent s i ze t o show pat t er n r epeat and t ext ur e.

[ 1. 6. 8 Sampl e Text ur ed Wal l Coat i ng Syst em Mock- Up

NOTE: I ncl ude t he f ol l owi ng Mock- Up sect i on when a t ext ur ed wal l coat i ng syst em i s i ncl uded i n t he pr oj ect .

Af t er coat i ng sampl es ar e appr oved and pr i or t o st ar t i ng i nst al l at i on, pr ovi de a mi ni mum 2. 43 m by 2. 43 m 8 f oot by 8 f oot mock- up f or each subst r at e and f or each col or and t ype of t ext ur ed wal l coat i ng usi ng t he act ual subst r at e mat er i al s. Use t he appr oved mock- up sampl es as a st andar d of wor kmanshi p f or i nst al l at i on wi t hi n t he f aci l i t y . Submi t at l east 48 hour advance wr i t t en not i ce t o t he Cont r act i ng Of f i cer ' s Repr esent at i ve pr i or t o mock- up i nst al l at i on.

SECTI ON 09 90 00 Page 23

] 1. 7 PACKAGI NG, LABELI NG, AND STORAGE

NOTE: The f ol l owi ng par agr aph i ncl udes t ai l or i ng f or i ncl usi on i n Navy pr oj ect s. I ncl ude t he l ast t wo sent ences f or Navy pr oj ect s onl y.

Mat er i al s wi t h a hi gh capaci t y t o absor b VOC emi ssi ons i ncl ude mat er i al s whi ch ar e woven, f i br ous or por ous i n nat ur e, such as acoust i cal cei l i ngs, car pet , and t ext i l es. I ncl ude such mat er i al s bei ng i nst al l ed i n br acket s.

Pr ovi de pai nt s i n seal ed cont ai ner s t hat l egi bl y show t he Cont r act speci f i cat i on number , desi gnat i on name, f or mul a or speci f i cat i on number , bat ch number , col or , quant i t y, dat e of manuf act ur e, manuf act ur er ' s f or mul at i on number , manuf act ur er ' s di r ect i ons i ncl udi ng any war ni ngs and speci al pr ecaut i ons, and name and addr ess of manuf act ur er . Fur ni sh pi gment ed pai nt s i n cont ai ner s not l ar ger t han 20 l i t er s 5 gal l ons. St or e pai nt s and t hi nner s i n accor dance wi t h t he manuf act ur er ' s wr i t t en di r ect i ons, and as a mi ni mum, st or ed of f t he gr ound, under cover , wi t h suf f i c i ent vent i l at i on t o pr event t he bui l dup of f l ammabl e vapor s, and at t emper at ur es bet ween 4 t o 35 degr ees C 40 t o 95 degr ees F. Do not st or e pai nt , pol yur et hane, var ni sh, or wood st ai n pr oduct s wi t h mat er i al s t hat have a hi gh capaci t y t o absor b VOC emi ssi ons[ , i ncl udi ng [ _____] ] . Do not st or e pai nt , pol yur et hane, var ni sh, or wood st ai n pr oduct s i n occupi ed spaces.

1. 8 SAFETY AND HEALTH

Compl y wi t h appl i cabl e Feder al , St at e, and l ocal l aws and r egul at i ons, and wi t h t he ACCI DENT PREVENTI ON PLAN, i ncl udi ng t he Act i v i t y Hazar d Anal ysi s as speci f i ed i n Sect i on 01 35 26 GOVERNMENTAL SAFETY REQUI REMENTS and i n Appendi x A of EM 385- 1- 1.