Attachment_05_-CONTRACT_SECURITY_CLASSIFICATION_DATA_(DD254)_WITH_SECURITY_CLASS_GUIDE_(SCG)_-_01.24.2017.pdf

Shipping and Storage Container, Guided Missile P/N 13556595

DD Form 254: Security Classification Guide

Attachment 05

W31P4Q-17-R-0063

DATE – 24 Jan 2017

Joint Air-to-Ground Missile

EXPORT CONTROL ACT WARNING: "WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25."

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense (DoD) and U.S. DoD contractors only; Critical Technology; 30 April 2014. Other requests shall be referred to: Project Manager, JAMS, SFAE-MSL-JA, Redstone Arsenal, AL 35898- 5710.

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DOD Industrial Security Manual apply to all security aspects of this effort)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED NONE

b. LEVEL OF SAFEGUARDING REQUIRED: NONE

2. THIS SPECIFICATION IS FOR: (x and complete as applicable) 3. THIS SPECIFICATION IS: (X and complete as applicable)

a. PRIME CONTRACT NUMBER a. ORIGINAL (Complete date in all cases) Date (YYMMDD)

b. SUBCONTRACT NUMBER b. REVISED (Supersedes all previous specs

Revision No. Date(YYMMDD)

c. SOLICITATION OR OTHER NUMBER W31P4Q-17-R-0063

Due Date (YYMMDD) 170118 X

c. FINAL (Complete item 5 in all cases) Date (YYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? [ ] YES [ X ] NO, If yes, complete the following Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract

5. IS THIS A FINAL DD FORM 254 [ ] YES [ X ] NO, If yes, complete the following:

In response to the contractors request dated ,retention of the identified classified material is authorized for a period of:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP

FOR BIDDING PURPOSES ONLY. NOT VALID FOR ACTUAL

CONTRACT UPON AWARD, SUBMIT CONTRACT AWARD DD

FORM 254 THROUGH APPROPRIATE AMCOM SECURITY

CHANNELS FOR CERTIFICATION.

b. CAGE

CODE

b. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP N/A

b. CAGE

CODE

c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

N/A

8. ACTUAL PERFORMANCE

b. CAGE

CODE

Defense Security Service

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

Joint Air-to-Ground Missile System (JAGM) Shipping and Storage Container, Guided Missile P/N 13556595

10. CONTRACTOR WILL REQUIRE ACCESS TO: YES NO 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: YES NO a.COMMUNICATIONS Security (COMSEC) Information

SECURITY (COMSEC) INFORMATION

X a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER CONTRACTORS FACILITY OR GOVERNMENT

ACTIVITY X

b. RESTRICTED DATA X b. RECEIVE CLASSIFIED DOCUMENTS ONLY X

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION X c. RECEIVE AND GENERATE CLASSIFIED MATERIAL X

d. FORMERLY RESTRICTED DATA X d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE X

e. INTELLIGENCE INFORMATION e. PERFORM SERVICES ONLY X

(1) Sensitive Compartmented Information (SCI) X f. HAVE ACCESS TO US CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND

TRUST TERRITORIES X

(2) Non-SCI X g. BE AUTHORIZED TO USE THE SERVICES OF THE DEFENSE TECHNICAL INFORMATION CENTER (DTIC) OR OTHER

SECONDARY DISTRIBUTION CENTER X

f. SPECIAL ACCESS INFORMATION X h. REQUIRE A COMSEC ACCOUNT X

g. NATO INFORMATION X i. HAVE TEMPEST REQUIREMENTS X

h. FOREIGN GOVERNMENT INFORMATION

X X j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS X

i. LIMITED DISSEMINATION INFORMATION X k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE X

j. FOR OFFICIAL USE ONLY INFORMATION X l. OTHER (specify X

k. OTHER (Specify) See items 13 X

DD Form 254, (Back), DEC 1999

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release. [ ] DIRECT [ X ] THROUGH (Specify)

Commander USAAMCOM Office of Public and Congressional Affairs, ATTN: AMSAM-PC, Redstone Arsenal, AL 35898-5000

JAMS Project Office, ATTN: SFAE-MSLS-JAMS-S, Redstone Arsenal, AL 35898-5000

The JAMS PMO technical point of contact is Eileen Beardsley , 256-876-0834 See attached continuation sheet.

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract. [ ] YES [ x ] NO (If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Statement of Work (Attachment 01) Attachment 02 AT/OPSEC (Attachment 02)

15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office. (If yes, explain and [ ] YES [X ] NO identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if more space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

a. TYPED NAME OF CERTIFYING OFFICIAL Tilden M. Clark

b. TITLE Chief, Intelligence and Security Manager

c. TELEPHONE (Include Area Code) 256-842-7734

d. ADDRESS (Include Zip Code)

Joint Attack Munition Systems Project Office 3300 Zeus Road Redstone Arsenal, AL 35898

17. REQUIRED DISTRIBUTION

[ X ] a. CONTRACTOR

[ ] b. SUBCONTRACTOR

[ X ] c. COGNIZANT SECURITY OFFICE FOR PRIME & SUBCONTRACTOR

[ ] d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY

ADMINISTRATION

[ X ] e. ADMINISTRATIVE CONTRACTING OFFICER

[ X ] f. OTHERS AS NECESSARY

e. SIGNATURE

Contract # W31P4Q-17-0063

CONTINUATION SHEET, DD FORM 254

ITEM 13 CONTINUED:

Prior to sub-contracting with a foreign industry the U.S. contractor will consult with the Contracting Officer and PEO Missiles and Space Foreign Disclosure Officer. Foreign subcontractors must agree that only citizens of their country or the U.S. will be allowed to perform on the contract. The U.S. contractor is responsible for complying with the regulations outlined in the International Traffic Arms and Regulations (ITAR)."

The contractor is not authorized to release any data to foreign nationals or foreign representatives without an approved export license.

Per DFARS 252.204-7012 Safeguarding of Unclassified Controlled Technical Information, all technical information resident on or transiting through contractor unclassified information systems requires safeguarding.

Per DFARS 252.239-7001, Information Assurance Contractor Training and Certificate is applicable.

Ref AT/OPSEC: The contractor shall develop an OPSEC Standing Operation Procedure (SOP)/Plan within 90 calendar days of contract award, to be reviewed and approved by the responsible Government OPSEC officer, per AR 530-1, Operations Security. This SOP/Plan will include the government’s critical information, why it needs to be protected, where it is located, who is responsible for it, and how to protect it. In addition, the contractor shall identify an individual who will be an OPSEC Coordinator. The contractor will ensure this individual becomes OPSEC Level II certified per AR 530-1.

Ref AT/OPSEC: Per AR 530-1, Operations Security, new contractor employees must complete Level 1 OPSEC training within 30 days of their reporting for duty. All contractor employees must complete annual OPSEC awareness training.

Item 10j. FOR OFFICAL USE ONLY INFORMATION (FOUO): Contractor will comply with the requirements of DoDM 5200.01, VOL 4. (pages 11-18), section 2. (FOUO INFORMATION) for the processing of FOUO information in this contract. Questions regarding this matter should be to the JAMS Industrial Security at 256-842-7734.

REF Item 10.k: IAW AR 381-12, Threat Awareness and Reporting Program (TARP), 04 Oct 10, contractors will report threat related incident, behavioral indicators, and other matters of CI interest specified in chapter 3, to the FSO, the nearest military CI office, the FBI, or the DSS.

Contractor Employees working as an integral part of the Army organization are required to complete annual Threat Awareness training. Contractor FSOs will ensure that all applicable AR381-12 requirements are implemented for personnel who work at contractor facilities.”

11.j: “Ref AT/OPSEC”, For contracts that require OPSEC Training, Per AR 530-1. Operations Security, new contractor employees...

ITEM 13 CONTINUED:

Ref 11.k: The Contracting Officer must obtain written approval from the Commander, Defense Courier Service, ATTN: Operations Division, Fort George G. Meade, MD 20755-5370. Only certain classified information qualifies for shipment by DCS. AMCOM is responsible for complying with DCS policy and procedures. Prior approval of AMCOM Contracting Officer is required before a prime contractor can authorize a subcontractor to use the services of DCS.

DODI 5200.33R, Defense Courier Operation, 19 May 07, and National Security Agency, Central Security Service, NSA/CSS Policy Manual No. 3-16, Aug 05, provide additional guidance regarding contractor use of the DCS. “Contractor Courier account will be established and maintained in accordance with DODI 5200.33R, Defense Courier Operation.”

DFARS Subpart 204.73: All contractors to report to DoD within 72 hours of discovery of any cyber incident that affects unclassified CTI resident on or transiting through the Contractor's unclassified information systems. When a cyber incident is reported by the contractor, the contracting officer will receive an e-mail notification from the Defense Cyber Crime Center (DC3). The contracting officer shall immediately notify the requiring activity's security manager of the incident and consult with the security manager prior to assessing contractor compliance. For Program Executive Office (PEO) activities, the security manager is the program/project/product manager (PM) or designee within the PM office. For non-PEO acquisitions, the security manager is the Contracting Officer's Representative (COR) or other technical point of contact at the requiring activity. To ensure swift reporting of cyber incidents, contracting officers should identify the appropriate security manager point of contact prior to the release of the solicitation.

If the security manager (or other acquisition and/or investigatory authority) elects to conduct a damage assessment of the incident, the contracting officer will request that the contractor provide all of the damage assessment information gathered in accordance with paragraph (d)(4) of the clause at 252.204-7012. The contracting officer shall consider reported cyber incidents in the context of an overall assessment of the contractor's compliance with the requirements of the clause at 252.204-7012.

ITEM 13 CONTINUED:

Distribution Statements: Distribution Statements are used to control the secondary distribution and release of program data which include research, development, technical, engineering, test, sustainment and logistics information. Distribution Statements help identify what audience is authorized to receive the impending information and reduce the risk of sensitive data being distributed via unapproved channels. A Distribution Statement on a piece of information is tailored to a specific audience in order to restrict the flow of that particular information. The following information is provided:

(1) Distribution Statement A Audience – Distribution Statement A is information that is approved for public disclosure. Information that is labeled with Distribution Statement A is authorized for release to the public and distribution is unlimited.

(2) Distribution Statement B Audience – Distribution Statement B is for information that is only to be disclosed to U.S. Government agencies only. This information may be disclosed to any government agency to include Non- Department of Defense (Non-DoD) organizations, but excludes disclosure to any Contractor or the public.

(3) Distribution Statement C Audience – Distribution Statement C is for information that may be disclosed to U.S. Government agencies and their contractors only. This information may be disclosed to any Government agency and the contractors that support that agency. This Distribution Statement includes disclosure to Non-DoD organizations and contractors, but excludes disclosure to the public.

(4) Distribution Statement D Audience – Distribution Statement D limits disclosure to DoD organizations and their contractors only. This information may be disclosed to any DoD organizations and the contractors that support them. Distribution D excludes disclosure to Non-DoD organizations, their contractors or the public.

(5) Distribution Statement E Audience – Distribution Statements E authorize disclosure to DoD components only. This Distribution Statement excludes disclosure to Non-DoD organization, all contractors or the public.

(6) Distribution Statement F Audience – Distribution Statement F is designated for a specific audience and restricts further dissemination. Any further dissemination must be approved by the Office of Primary Responsibility (OPR) or a higher DoD authority.

Reasons to Assign Distribution Statements: Distribution Statements denote the extent of availability, distribution, release and disclosure of the information without additional approvals or authorizations. A distribution statement an additional marking that is distinct from assigned security classification markings. The “Reasons” assigned to a distribution statement capture the rationale for limiting distribution to a particular audience. The letters A, B, C, D and E represent the Distribution Statement associated with the reason listed:

ITEM 13 CONTINUED:

REASON

DISTRIBUTION

STATEMENT

The complete reason shall be written in the Distribution Statement on the document

A B C D E F

PUBLIC RELEASE X N/A

ADMINISTRATIVE OR OPERATIONAL USE:

To protect technical or operational data or information from automatic dissemination under the International Exchange Program or by other means.

This protection covers publications required solely for official use or strictly for administrative or operational purposes. This statement may apply to manuals, pamphlets, technical orders, technical reports, and other publications containing valuable technical or operational data.

X X X X N/A

CONTRACTOR PERFORMANCE EVALUATION:

To protect information in management reviews, records of contract performance evaluation, or other advisory documents evaluating programs of contractors.

X X N/A

CRITICAL TECHNOLOGY:

To protect information and technical data that advance current technology or describe new technology in an area of significant or potentially significant military application or that relate to a specific military deficiency of a potential adversary. Information of this type may be classified or unclassified.

X X X X N/A

DIRECT MILITARY SUPPORT:

The document contains export-controlled technical data of such military significance that release for purposes other than direct support of DoD-approved activities may jeopardize an important technological or operational military advantage of the United States, another country, or a joint U.S.-foreign program. Designation of such data is made by competent authority in accordance with DoD Directive 5230.25.

X N/A

EXPORT CONTROLLED:

To protect information subject to the provisions of DoD Directive 5230.25. X X X X N/A

FOREIGN GOVERNMENT INFORMATION:

To protect and limit distribution in accordance with the desires of and agreements with the foreign government that furnished the technical information.

X X X X N/A

OPERATIONS SECURITY:

To protect information and technical data that may be observed by adversary intelligence systems and determining what indicators hostile intelligence systems may obtain that could be interpreted or pieced together to derive critical information in time to be useful to adversaries.

X X N/A

PREMATURE DISSEMINATION:

To protect patentable information on systems or processes in the development or concept stage from premature dissemination.

X X N/A

PROPRIETARY INFORMATION:

To protect information not owned by the U.S. Government and marked with a statement of a legal property right. This information is received with the understanding that it will not be routinely transmitted outside the U.S.

Government.

X X N/A

TEST AND EVALUATION:

To protect results of test and evaluation of commercial products or military hardware when disclosure may cause unfair advantage or disadvantage to the manufacturer of the product.

X X N/A

SOFTWARE DOCUMENTATION: X X X X N/A

ITEM 13 CONTINUED:

REASON

DISTRIBUTION

STATEMENT

The complete reason shall be written in the Distribution Statement on the document A B C D E F

To protect technical data relating to computer software that is releasable only in accordance with the software license in subpart 227.72 of title 48, Code of

Federal Regulations. It includes documentation such as user or owner manuals, installation instructions, operating instructions, and other information that explains the capabilities of or provides instructions for using or maintaining computer software.

SPECIFIC AUTHORITY:

To protect information not specifically included in the above reasons, but which requires protection in accordance with valid documented authority

(e.g., Executive orders, statutes such as Atomic Energy Federal regulation).

When filling in the reason, cite “Specific Authority (identification of valid documented authority).”

X X X X N/A

VULNERABILITY INFORMATION:

To protect information and technical data that provides insight into vulnerabilities of U.S. critical infrastructure, including DoD warfighting infrastructure, vital to National Security that are otherwise not publicly available.

X X X X N/A

Official Distribution Statement Examples: Distribution Statements B, C, D and E shall list the audience authorized to receive the information, the reason the information release is restricted, the date the determination was made and previsions to request authorization from the controlling office to further disseminate this information to any other audience. The reason is not required for Distribution Statements A and F. The following are examples of valid Distribution Statements:

(1) Distribution Statement A – Approved for public release; distribution is unlimited (Public Domain Information).

(2) Distribution Statement B – Distribution authorized to U.S. Government agencies only (fill in the complete reason statement) (date of determination). Other requests for this document shall be referred to Joint Attack Munition Systems (JAMS) Project Office, ATTN: Security Office (SFAE-MSL-JAS), Redstone Arsenal, AL 35898-5710.

(3) Distribution Statement C – Distribution authorized to U.S. Government agencies and their contractors (fill in the complete reason statement) (date of determination). Other requests for this document shall be referred to Joint Attack Munition Systems (JAMS) Project Office, ATTN: Security Office (SFAE-MSL-JAS), Redstone Arsenal, AL 35898- 5710.

(4) Distribution Statement D – Distribution authorized to the Department of Defense (DoD) and DoD contractors only (fill in the complete reason statement) (date of determination).

Other requests for this document shall be referred to Joint Attack Munition System (JAMS) Project Office, ATTN: Security Office (SFAE-MSL-JAS), Redstone Arsenal, AL 35898-5710.

ITEM 13 CONTINUED:

(5) Distribution Statement E – Distribution authorized to DoD Components only (fill in the complete reason statement) (date of determination). Other requests for this document shall be referred to Joint Attack Munition Systems (JAMS) Project Office, ATTN:

Security Office (SFAE-MSL-JAS), Redstone Arsenal, AL 35898-5710.

(6) Distribution Statement F – Further dissemination only as directed by Joint Attack Munition Systems (JAMS) Project Office (date of determination) or higher DoD authority.

Other requests for this document shall be referred to JAMS Project Office, ATTN:

Security Office (SFAE-MSL-JAS), Redstone Arsenal, AL 35898-5710.

Export Control Act Statement: Under 22 United States Code (U.S.C.) 2778, the penalty for unlawful export of items or information controlled under the International Traffic in Arms Regulations (ITAR) is up to 2 years imprisonment, or a fine of $100,000, or both. Under 50 U.S.C., Appendix 2410, the penalty for unlawful export of items or information controlled under the Export Administration Regulation (EAR) is a fine of up to $1,000,000, or five times the value of the exports, whichever is greater; or for an individual, imprisonment of up to 10 years or a fine of up to $250,000, or both.

UNLESS OTHERWISE APPROVED BY THE JAMS PROJECT OFFICE, ALL PRINTED AND

DIGITAL TECHNICAL DOCUMENTS, SOFTWARE AND COST DATA SHALL BE SUBJECT

TO EXPORT RESTRICTIONS AS FOLLOWS:

This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. Seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. Seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

JAMS SECURITY CLASSIFICATION GUIDE FOR JOINT AIR-TO-GROUND MISSILE (JAGM)

PROGRAM EXECUTIVE OFFICE, MISSILES AND SPACE

Joint Attack Munition Systems (JAMS)

Joint Air-to-Ground Missile (JAGM)

SECURITY CLASSIFICATION GUIDE (SCG)

DISTRIBUTION STATEMENT D: Distribution authorized to Department of Defense (DoD) and DoD Contractors only by reason of critical technology, 19 May 2014. Other requests for this document shall be referred to Program Executive Officer, Missiles and Space, ATTN: SFAE-MSL-JAS.

This document contains information that is exempt from mandatory disclosure under the Freedom of Information Act. Exemption 2 applies.

LOCAL REPRODUCTION: This document is authorized for reproduction only in its entirety.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction as if it were classified waste is recommended.

FOR OFFICIAL USE ONLY

JAGM SECURITY CLASSIFICATION GUIDE

DEPARTMENT OF THE ARMY

PROGRAM EXECUTIVE OFFICE MISSILES AND SPACE

PROJECT MANAGER, JOINT ATTACK MUNITION SYSTEMS

REDSTONE ARSENAL, AL 35898-8000

Security Classification Guide

This document shall be used as guidance for classifying and declassifying information and material related to the Joint Air-to-Ground Missile program.

Supersedes: Joint Air-to-Ground Missile (JAGM) Dated: 14 Sept. 2010

Approved by Program Executive Officer, Missiles and Space.

rigadier General (P), Program Executive Officer, Missiles and Space

I G}rf io.(

TABLE OF CONTENTS

Section

AUTHENTICATION PAGE

TABLE OF CONTENTS

Page

SECTION 1: GENERA.L

1. Purpose

2. Authority and Scope

3. Office of Primary Responsibility

4. Classification Challenges

5. Reproduction, Extraction and Dissemination

6. Determination of Classification . .. . ...... ...... ........ , ....... . ........... ,

7. Public Release

8. Foreign Disclosure

SECTION 2: OVERA.LL EFFORT

SECTION 3: PERFORMANCE AND CAPABILITIES

SECTION 4: SPECIFICATIONS .................................... ~

SECTION 5: CRITICAL ELEMENTS

SECTION 6: VULNERA.BILITIES AND WEAKNESSES

SECTION 7: ADMINISTRA.TIVE DATA

SECTION 8: SOFTWARE AND FIRMWARE

APPENDIX A: ACRONYMS AND DEFINITIONS

APPENDIX B: REFERENCES

SECTION 1. GENERAL

1. Purpose: To provide classification policy, guidance, and procedures for information and activities pertinent to the JAGM program.

2. Authority and Scope:

a. This guide is issued pursuant to provisions of Department of Defense (DoD) Manual 5200.01 Vol 1-4 Information Security Program, Army Regulation (AR) 380-5 Department of the Army Information Security Program, and DoD Manual 5220.22-M, National Industrial Security Program Operating Manual. Information classified according to this guide, including operations and activities that reveal such information, shall be safeguarded in accordance with applicable agency security directives. This guide includes requirements established by Executive Order (EO) 13526, Classified National Security Information, as amended.

b. This guide constitutes authority and shall be cited as the basis for classification, re-grading and declassification of information and material associated with the JAGM program. Changes in classification required by application of this guide are effective immediately. There is no retroactive requirement to re-mark classified JAGM documents which were generated prior to the effective date of this guide. However, mark those documents generated under EO 13526, as amended, to comply with applicable agency policy directives for implementing the EO. The classification shown within this SCG is the highest level anticipated.

3. Office of Primary Responsibility (OPR): The Joint Attack Munition Systems (JAMS) Project Office has primary responsibility for overall management of the JAGM program. Inquiries, challenges, suspected compromises of information and suggestions concerning this guide and its interpretation should be addressed to Joint Attack Munition Systems Project Office, SF AE-MSL-JAS, 5250 Martin Road, Redstone Arsenal, AL 35898-8000 ATTN: SFAE-MSL-JAS, Commercial 256-842-7734 or DSN 788-7734.

4. Classification Challenges: If there is substantial reason to believe the security classifications prescribed in this guide impose requirements that are impractical or, if this guide needs to be changed due to the technological changes in the state-of-the-art or progress attained in the effort, communicate such to the JAMS security manager. Pending final decision, handle and protect the information at its current classification level or at the recommended change level, whichever is higher. Point of contact for challenge to classification decisions for information related to the JAGM program is Joint Attack Munition Systems Project Office, Building 5250 Martin Road Redstone Arsenal, AL 35898 ATTN: SFAE-MSL-JAS. Commercial 256-842-7734 or DSN 788-7734. Include sufficient description to permit identification of the specific information under challenge with reasonable effort. Include detailed justification outlining why the information is improperly or unnecessarily classified.

5. Reproduction, Extraction and Dissemination: This document provides authority to reproduce, extract from and or disseminate the SCG as necessary to those supporting the effort, including industry. Reproduction, extraction and dissemination are limited to the restrictions of the Distribution Statement applied to this SCG. Distribution authorized to DoD agencies and their contractors for administrative and operational use.

6. Determination of Classification:

The security classification system should deny foreign governments information regarding U.S. capabilities and intentions that would permit them to modify their military systems and plans in a manner to lessen the effectiveness of U.S. systems and de-value the U.S. investment in the acquisition of that system. Information that requires application of national security considerations include:

effectiveness, countermeasure susceptibility, limitations, and concepts for potential operational deployment and tactics. Equally important is the protection of information that, if known by a foreign country, could reduce the time, cost, and risk of developing a viable defense system or similar technology for weapon system application. Critical data needed to accomplish program goals require higher security classification. Information shall be classified based on context as well as content.

1.4a - military plans, weapon systems, or operations;

1.4e - scientific, technological, or economic matters relating to the national security;

1.4g - vulnerabilities or capabilities of systems, installations, infrastructures, projects, plans or protection relating to the national security; which includes defense transnational terrorism;

7. Public Release:

a. The fact that this guide shows certain details of information to be unclassified does not authorize automatic public release of such information. Separate from classification, there are other reasons why information may not be releasable including national-level policy implications. Other important release restrictions are governed by the provisions of the Freedom of Information Act (FOIA), Operation Security (OPSEC) and regulations that apply to technical or other export controlled data. FOIA requests shall be processed through established FOIA channels as described in DoD Regulation 5400.7-R, DoD Freedom oflnformation Act Program. Strictly control distribution of the material until reviewed and approved for public release by the U.S. Army Program Executive Office, Missiles and Space (PEO MS).

b. Any proposed release into the public domain of information pertaining to JAGM from outside of the JAGM or other PEO MS office, will be submitted through Commander, US Army Aviation and Missile Command Life Cycle Management Command (USAAMCOM LCMC), ATTN: AMSAM-PA, Redstone Arsenal, AL 35898-5020, in accordance with Chapter 5, AR 360-1 The Army Public Affairs Program. Releases which require referral to the Office of the Assistant Secretary of Defense (Public Affairs) (OASD (PA)) as set forth in DoD Manual 5220.22-M, National Industrial Security Program Operating Manual, DoD 5230.09, Clearance ofDoD Information for Public Release, with Change 1, and DoD Regulation 5400.7-R, shall be submitted 60 days in advance to allow sufficient time for processing. No material will be released until clearance is granted.

c. All material proposed for public release will require an OPS EC review by JAGM OPSEC personnel and technical review by a JAGM subject matter/technical expert review before release to the general public.

8. Foreign Disclosure:

a. Release of any information on this program to any foreign government, foreign nationals, representatives of a foreign government or nation, or U.S. citizen residing in a foreign country, is subject to the provisions of AR 380-10, Foreign Disclosure and Contacts with Foreign Representatives. Any government activity or defense contractor receiving a request for classified or unclassified official information pertaining to this program from any foreign government, foreign national, representative of a foreign government or nation, or U.S. citizen residing in a foreign country shall advise the requestor to make an official request through his Embassy to the Department of Army, Deputy Chief of Staff for Intelligence (DCSINT).

b. For classified military information, the disclosure authority is the PEO MS Foreign Disclosure Officer (FOO) and the HQDA, G2. Such material must be consistent and supported by an appropriate release mechanism (i.e., Foreign Military Sales (FMS) case or Delegated Disclosure Letter (DDL)).

c. For controlled unclassified information (CUI), the disclosure authority is the respective PM in accordance with the PEO MS Memorandum, subject: Authority to Disclose Technical Controlled Unclassified Information (CUI).

d. Foreign military sales issues will be considered during the review of all classification guides and coordination for such issues will be made with foreign disclosure officers and security assistance/foreign military sales representatives.

SECTION 2: OVERALL EFFORT

ELEMENT CLASS DECLASS REASON REMARKS

2.1 Identification

2.1.1 Model Designation u

2.1.2 Nomenclature u

2.1.3 National Stock Number u

2.2 End Items

Military applications are UNCLASSIFIED.

Military applications become CONFIDENTIAL when sufficient detail is presented such that classified system performance or force capabilities are revealed or implied. Force capabilities measures such as force probability of survival, force loss exchange ratio, and threat stopped distance are UNCLASSIFIED when the

2.2.1 Military Application of the System U,C,S

14 Sept

1.4 (a) (g) country of the opposing forces is not stated or

2032 implied. The specific exchange ratio between U.S. firing platforms and specific targets is equal to the level of classification of the Probability of Single Shot Kill (PSSK) and Probability of Single Shot Incapacitation (PSSI) for the specific target. In all cases, whether at the force level or lower, when countermeasures explicitly are a contributing factor, the results are SECRET.

2.2.2 External View u

Internal views and drawings, photographs, hardware models, and mockups of the missile will be UNCLASSIFIED unless annotations or

2.2.3 Internal View (Missile)

information contained within reveal classified U,S 1.4 (a) (e) parameters, characteristics, and/or performance per this SCG. If the design contains or uses a warhead whose penetration performance exceeds 11 charge diameters then warhead detailed views are SECRET.

Reports, specifications, data publications, drawings, schematics, photographs, magnetic and video tapes, films, models, mockups, training aids, laboratory hardware, computer programs, production line test equipment/software, and all other forms of information/ presentation will be individually

2.2.4 Documentation and Design Reports

assigned a security classification commensurate

See with the classification level of information/data, (except Warhead and Software)

Remarks revealed therein as determined by application of this guide. Any detailed discussion, report, or study of system capabilities and/or limitations from which conclusions may be drawn that could suggest a design solution, technique, tactic, or procedure to defeat a specific missile capability will be classified SECRET. This does not imply that individual performance characteristics of the system are SECRET.

2.2.5 Test and Simulation Data

Flight, simulation, and field test data are UNCLASSIFIED unless associated with actual target or background conditions such as target type, target delta temperature, target radar cross section, target reflectivity, obscurant levels, in which case the data is CONFIDENTIAL. Data

2.2.5.1 Test and Simulation Data U,C,S

14 Sept 1.4 (a) (e) with quantified weather or obscuration effects 2032 (g) (rain rate, atmospheric transmission, etc.) are

CONFIDENTIAL. If the description of countermeasures employed is revealed or seeker/tracker vulnerability is apparent, the tracking data is SECRET. Data revealing a susceptibility to a countermeasure is classified

SECRET.

2.2.5.2 Thrust, Accelerations, Velocity, or u

Position vs. Time or Range

Track point or aim point, hit point, and miss distance are UNCLASSIFIED for single tactical

2.2.5.3 Track Point, Hit Point, Aim Point, 14 Sept

flight simulation runs or single flight tests if not u,s 1.4 (a) (e) associated with specific non-variable target Miss Distance 2032 input scenario parameters (e.g. target heading, target velocity, target maneuvers). Statistically

- significant sample sizes are SECRET.

ELEMENT CLASS DE CLASS REASON REMARKS

Seeker Data is classified up to the SECRET level. Sensor data with information defining ranges to the target together with target to

2.2.5.4 Seeker Data s 14 Sept

1.4 (a) (e) background ratios (delta temperatures, signal to 2032 noise ratio, signal to clutter ratios, target radar cross section, target reflectivity, etc.) are SECRET. See Section 5.2 for Seeker parameter specifics.

Trajectory data, photographs, and videotapes that show the instantaneous body angle are

UNCLASSIFIED unless associated with

2.2.5.5 Trajectory Data U,S 1.4 (a)(e) Probability of Hit (Phit) or Probability of Kill

(PK) in which case the level of classification appropriate to the information revealed will be applied. See Section 2.2.11, 2.2.12, and 2.2.13

The classification level of test and simulation data for warhead performance, Probability of

See Kill (PK), and Probability of Incapacitation (Pl)

2.2.6 Warhead Test Data

Remarks against the JAGM target suite are determined by the level to which the target structure or range target information is classified for each JAGM target.

2.2. 7 System Specification s 14 Sept

2.2.8 Hardware

2.2.8.1 Equipment designed specifically

to operate and launch the JAGM which can u neither store nor access CLASSIFIED data.

2.2.8.2 All components, hardware, equip, and systems that do not by themselves store, u access, or reveal parameters CLASSIFIED elsewhere

2.2.9 Launchers u

2.2.10 Minimum Arming Distance u

2.2.11 Performance Envelopes when c 14 Sept

1.4 (a)(e) associated with Phit 2032

2.2.12 Performance Envelopes when s 14 Sept

associated with PK, PI 2032

2.2.13 Performance Envelopes when not u

associated with Phit or PK, PI

SECTION 3: PERFORMANCE AND CAP ABILITIES

3.1 Missile Performance

3.1.1 Trajectories u

3 .1.2 Speed (maximum and velocity profile) u

3.1.3 Terminal Missile Body Angle u

3 .1.4 Maximum Lateral Acceleration u

Capability

3.1.5 Time of Flight u

3 .1. 6 Gimbal Angle Deflection u

3.1.7 Scan Rate u

3.1.8 Maximum Slew Rate u

3.1.9 Maximum Tracking Rate u

3.1.10 Missile Acquisition and Engagement

Timeline (handover, acquisition, tracking, u missile away)

3 .1.11 Range

3.1.11. l Minimum and Maximum Range

Design Requirement or capability when c 14 Sept associated with Phit or seeker Guided Circular 2032 Error Probable (CEP)

3.1.11.2 Minimum and Maximum Range

Design Requirement or capability when s 1.4 (a) (e) associated with PK, PSSI, or PI

3.1.11.3 Minimum and Maximum Range

Design Requirement or Capability when not u Associated with Phit, PSSI, PI, PK, or Se~ker

Guided CEP

Performance against specific targets is equal to the level of classification of the PSSK for the

3.2 Performance Against Targets

See specific target. In all cases, whether at the force

Remarks level or lower, when countermeasures explicitly are a contributing factor, the results are

3.3 System Effectiveness

3.3.1 Hit Probability (Phit) (actual or from

Approximate values of Ph and sensor guided simulation) and Seeker Guided CEP in Clear Air See CEP for production missiles for use in

Remarks documents such as training manuals are

UNCLASSIFIED.

3.3.2 Phit and Seeker Guided CEP against s 14 Sept 1.4 (a)(e) CMs or Weather Effects 2032 (g)

3.3.3 PK, PSSI, and PI s 14 Sept

3.3.4 Inertial Accuracy and Inertial u

Measurement System (IMS) performance

3.4 Telemetry

An Unencrypted Telemetry Stream is UNCLASSIFIED when separated from the Telemetry Data Scale Factors, and

3.4.1 Unencrypted Telemetry Data Stream U,S

Descriptions and transmitted on a CONUS

2032 Government Test Range, otherwise it is classified at the level of information presented up to the level of SECRET as specified in this

SCG.

Scale factors, ordered list of transmitted variables, and data describing digital

3.4.2 Telemetry Data Scale Factors, Format, See representation of telemetry data is classified and Descriptions Remarks to the level of the information protected up to SECRET as specified in this SCG.

When a telemetry data stream is encrypted

3.4.3 Encrypted Telemetry Data Stream u using NSA certified methods, procedures, and hardware it is UNCLASSIFIED.

3.5 Motor/Propellant

3.5.1 Type u

3.5.2 Burn Time u .

Exact and complete minimum smoke propellant formulation data is CONFIDENTIAL (unless superseded by another applicable SCG).

3.5.3 Formulation U,C 1.4 (a)(e) Approximated formulation data, required for safety documentation, is UNCLASSIFED.

Reduced smoke propellant formulation data is

3.5.4 Thrust/Specific Impulse u

3.5.5 Weight u

3.5.6 Grain Configuration u

SECTION 4: SPECIFICATIONS

4.1 Physical Characteristics u

4.2 Quality Assurance u

4.3 Power Requirements u

4.4 Platform Target Acquisition

System/Designator System Interfaces

4.4.1 Electrical and Mechanical u

Requirements

This item describes the security classification of the JAGM requirements for the missile to aircraft interfaces of platform target acquisition

4.4.2 Performance Requirements

See and designator systems. The performance

Remarks capabilities for the interfaces for each specific platform shall be classified in accordance with each platform security classification guide up to the level of SECRET.

4.5 Explosive Ordnance Disposal Technical c 14 Sept

1.4 (e)

Manual 2032

SECTION 5: CRITICAL ELEMENTS

5.1 Lethality

5 .1.1 Warhead Performance

Analytical or experimental unitary/tandem warhead performance against an armored target shall be classified at the level of the target. Rolled Homogeneous Armor (RHA) test data is CONFIDENTIAL. When unitary

5.1.1.1 Armor Targets U,C,S

or tandem RHA penetration exceeds 11 charge

2032 diameters, specific liner coupled with waveshaper design features are classified SECRET. Flight test warhead data against vehicles are classified at the same level as the vehicle. Experimental spall data are

Analytical or experimental warhead performance against structure targets shall be classified at the level of the target up to

CONFIDENTIAL.

Warhead perforation performance against vehicles/ships structures is classified at the

5.1.1.2 Non-Armor Targets

level of the targets.

Warhead perforation performance against Military Operations on Urban Terrain (MOUT) targets is UNCLASSIFIED.

Warhead fragmentation and secondary lethality effects (pressure and temperature) data are UNCLASSIFIED.

5 .1.2 Probability of Kill and Probability of Incapacitation (PK/PSSK, PSSI)

Kill probability for tanks prior to T-64 are UNCLASSIFIED. Kill probability for T-64 and later tanks are classified SECRET. Kill

5.1.2.1 PK/PSSK for Armor Targets u,c,s 1.4 (a) (e) probability for armored vehicles prior to the

BMP-2 are UNCLASSIFED and for the BMP- 2 and later armored vehicles are classified

Kill probabilities for non-armored vehicles,

5.1.2.2 PKIPSSK for Non-Armor Targets

See MANP ADS, trucks/Sports Utility Vehicles, Remarks launchers, or structure targets are classified at the level of the target.

5.1.2.3 PI s 14 Sept

1.4 (e)

Probabilities of incapacitations are

2032 CONFIDENTIAL.

5.1.3 Warhead Design

5.1.3.1 Lethal Mechanism Type u

Basic warhead design features including simplified pictorials, spacing, and non-liner materials/dimensions are UNCLASSIFIED.

5.1.3.2 Charge Pictorial and Drawings u Warhead assemblies are UNCLASSIFIED if classified information cannot be obtained visually without disassembly and not superseded by another applicable SCG. Note exception in Element 2.2.3.

Jet radiographs are UNCLASSIFIED iftiming data and scale factors are not specified,

5.1.3.3 Jet Characteristics U,C

1.4 (a) (e) otherwise CONFIDENTIAL.

General jet characterization data including tip/tail velocity, total mass, and nominal breakup times are UNCLASSIFIED.

Warhead tactical time delay between tandem warhead munitions against heavy armored targets is CONFIDENTIAL. Default time

5.1.3.4 Time Delay U,C

delays, time delays for non-heavy armor

2032 targets and time delay for MOUT targets are UNCLASSIFIED. Contact fuze/impact sensor response times to given targets are

Height of burst performance is

5.1.3.5 StandoffFuzing Performance U,S

1.4 (a) (e) UNCLASSIFIED, Probability of Incapacitation is SECRET.

Advanced concepts and design data for warhead concepts that are being considered for incorporation into the JAGM system that are capable of penetration that exceeds 11 charge

5.1.3.6 Advanced Warhead Design Data

diameters are classified up to SECRET. This includes advanced liner concepts, their drawings or other design details that implies the source of the warhead superior performance.

5.2 Seeker General Characteristics

5.2.1 Target Detection Range s 14 Sept

1.4 (a) (e) (g)

5.2.2 Gimbal Maximum Slew Rate u

5.2.3 Gimbal Maximum Angular Deflections u

5.2.4 Scan Rate u

5.2.5 Gimbal Angle Maximum Limits u

CM technology, technical specification, and design for JAGM are SECRET. Distribution

5.2.6 Details of CM Technologies s 1.4 (a) (e) Statement F: Further dissemination only as directed by the JAMS Project Office (date of determination) or higher DOD authority.

Probability of detect, Probability of Correct

5.2.7 Seeker Performance Characteristics s

1.4 (a) (e) Classification, Probability of Identification, Probability of False Alarm.

Target Acquisition Range is SECRET when associated with specific targets, target

5.2.8 Target Acquisition Range U,S

signatures and environmental conditions.

2032 Approximate System Acquisition Range Capability is UNCLASSIFIED for test and simulation matrices and training.

Target Track Range is SECRET when associated with specific targets, target

5.2.9 Target Track Range U,S

1.4 (a)(e)(g) signatures and environmental conditions.

2032 Approximate System Track Range Capability is UNCLASSIFIED for test and simulation matrices and training manuals.

5 .2 .10 Target Classification/Identification s 14 Sept

Range 2032

5.2.11 Target Commit Range s 14 Sept

1.4 (a)(e) (g)

5.3 IR Sensor Characteristics

5.3.1 General Optical Techniques u

Component prescriptions are SECRET when the information can be used to derive classified parameters. Design and

5.3.2 Specific Design U,S

performance (e.g., system Modulation

2032 Transfer Function (MTF), system focal length) of combinations of components that reveals classified capabilities are classified to the level of the revealed parameters.

5.3.3 Optical susceptibility and s 14 Sept

vulnerability to countermeasures 2032

General spectral band, Midwave Infrared,

5.3.4 Spectral Response U,C

Longwave Infrared (e.g., MWIR, L WIR) is

2032 UNCLASSIFIED. Specific spectral design is

5.3.5 Field of View c 14 Sept

5.3.6 Maximum Tracking Rate u

5.3.7 Minimum Resolvable Temperature c 14 Sept

(MRT) 2032

5.3.8 Minimum Trackable Temperature c 14 Sept

(MTT) 2032

5.3.9 Noise Equivalent Delta c 14 Sept

Temoerature (NEDT) 2032

5.3.10 Optical Modulation c 14 Sept

Transfer Function (OMTF) 2032

5.3.11 Detectivity (D*) u

5.3.12 QuantumEfficiency u

5.3.13 Infrared (IR) Scene based non- c 14 Sept

uniformity correction performance 2032

5.3.14 Instantaneous field of View c 14 Sept

5.3.15 IR Detector Array System

(Spectral Response, size and Pixel dimensions, u

NEDT)

5.4 Radar Sensor Characteristics

5.4.1 Radar Mode Detection and s 14 Sept 1.4 (a)(e)

Acquisition Probabilities and Tracking Accuracy 2032

Alphabetical frequency band is

5.4.2 Radar Operating Frequency Band U,S

UNCLASSIFIED. Specific radar center

2032 frequency and radar frequency bandwidth are

5.4.3 Radar Center Frequency s 14 Sept

5.4.4 Antenna Aperture size, Gain, u

Beamwidth, or Sidelobes

5.4.5 Radar Mode-Specific Waveforms s 14 Sept

5.4.6 System Receiver Sensitivity (Minimum s 14 Sept

Detectable Signal to include processing gains) 2032

5.4.7 Receiver Noise Figure u

5.4.8 System Intermediate Frequency (IF) s 14 Sept 1.4 (a) (e) (g)

Bandwidth 2032

5.4.9 Radar Blind Range s 14 Sept

5.4.10 Range Gate Size/Positioning s 14 Sept

5.4.11 Radar Frequency Bandwidth s 14 Sept

5.4.12 Frequency Agility Stepsize s 14 Sept

5.4.13 Pulse Compression Codes and s 14 Sept

Ratios, Modulation Codes and Transition Points 2032

5.4.14 PRF/Processing Dwell Time s 14 Sept

5.4.15 Spurious Signals s 14 Sept 1.4 (a)(e)

5.4.16 Transmit Pulse Characteristics s 14 Sept

5.4.17 Antenna Center Frequency and s 14 Sept

Operating Bandwidth 2032

5.4.18 Fractional Frequencies of exciter s 14 Sept

Local Oscillator (LO) frequency used in design 2032

5.4.19 Pulse Repetition Interval (PRl) s 14 Sept

1.4(a)(e)

5.4.20 Pulse Widths s 14 Sept

5.4.21 Transmit Power s 14 Sept

5.4.22 Effective Radiated Power (ERP) s 14 Sept

5.4.23 System Losses s 14 Sept

5.5 Laser Sensor Characteristics

5.5.1 General Optical Techniques u

5.5.2 Optical susceptibility and vulnerability s 14 Sept

to countermeasures 2032

5.5.3 Noise Equivalent Irradiance (NEI) s 14 Sept

5.5.4 Field of View u

5.5.5 Number of pulses to correlate u

5.5.6 Number of pulses to decorrelate c 14 Sept 2032

5.5.7 Maximum Correlation Range c 14 Sept

5.5.8 Target Motion Capability u

5.5.9 Pulse Repetition Frequency (PRF) u

Codes/Pulse Rates/Channels

5. 5 .10 Pulse Timing _Accuracy c 14 Sept

5.5.11 Alternate coding system details, Algorithm, channel numbers, coding scheme u descriptions, hardware, and software except keywords.

5.5.12 Interface protocol for Alternate Coding

keyword I motherword handling between the u launch platform and the launcher

5.5.13 Conversion algorithm for

generating channels from Alternate Coding keywords and the interface protocol for the u output of channels from the launcher to the missile

5. 5 .14 Interface and Alternate Coding keyword generation (including pulse intervals, u channel lengths, and numbering schemes) information

Specific alternate code key words declassified by JAMS PO for use in testing and training, and the pulse outputs resulting from use of those key words are UNCLASSIFIED. Range Operations assigns classification for codes of the day for test and training and these codes

5.5.15 Alternate coding keywords and U,C 14 Sept

are usually CONFIDENTIAL for a specific outputs except for test and training 2032 period of time and are automatically declassified 24 hours after replacement. The Alternate Coding pulse interval sequences are UNCLASSIFIED when stored electronically in volatile memory in an operational designator or platform, otherwise they are

CONFIDENTIAL

The tactical key word of the day is

5.5.16 Keyword of the day in tactical use U,C

UNCLASSIFIED when stored electronically

2032 in volatile memory in an operational designator, otherwise it is CONFIDENTIAL.

5. 5 .1 7 Codes of the day in tactical use c 14 Sept

5.5.18 Keyword generation software u

5.5.19 Wavelength u

5.6 Counter Active Protection System

(CAPS), Counter Defensive Aide Suites (DAS) See See Counter Active Protection System Requirements, Missile Integration Design Remarks Security Classification Guide, 22 Aug 08 Information, and Performance

SECTION 6: VULNERABILITIES AND WEAKNESSES

6.1 Threat, Countermeasures (CM)

Susceptibility or Vulnerability

Any detailed discussion, report, study, test or simulation data describing JAGM susceptibilities, vulnerabilities, or limitations from which conclusions may be drawn that could suggest a design solution, technique,

6.1.1 Theoretical and Proven Vulnerability of

14 Sept 1.4 (a) (e)

.tactic, or procedure to defeat a specific…