UFGS 09 06 90 Color Schedule (need colors).docx

SECTION TABLE OF CONTENTS

DIVISION 09 – FINISHES

SECTION 09 06 90

COLOR SCHEDULE

05/09

PART 1 GENERAL

1.1 SUMMARY

PART 2 PRODUCTS

2.1 COLOR SCHEDULE

2.2 EXTERIOR FINISHES (NOT USED)

2.3 INTERIOR FINISHES

2.3.1 Interior Floor Finishes

2.3.1.1 Concrete (Paint)

2.3.1.2 Industrial Floor Coating

2.3.2 Interior Base Finishes

2.3.2.1 Resilient Base and Moldings

2.3.2.2 Integral Cove Base

2.3.2.3 Paint

2.3.3 Interior Wall Finishes (Not Used)

2.3.4 Interior Ceiling Finishes (Not Used)

2.3.5 Interior Trim

2.3.5.1 Metal Stairs

2.3.5.2 Bollards

2.4 PLACEMENT SCHEDULE

PART 3 EXECUTION

-- End of Section Table of Contents --

SECTION 09 06 90 Page 2

SECTION 09 06 90 COLOR SCHEDULE

05/09

PART 1 GENERAL

1.1 SUMMARY

This section covers only the color of interior materials and products that are exposed to view in the finished construction. The word "color", as used herein, includes surface color and pattern. Requirements for quality, product specifications, and method of installation are covered in other appropriate sections of the specifications. Specific locations where the various materials are required are shown on the drawings if not identified in this specification. Items not designated for color in this section may be specified in other sections. When color is not designated for items, propose a color for approval.

PART 2 PRODUCTS

2.1 COLOR SCHEDULE

The color schedule information provided in the following paragraphs lists the colors, patterns and textures required for exterior and interior finishes, including both factory applied and field applied colors. Where color is shown as being specific to one manufacturer, an equivalent color by another manufacturer may be submitted for approval. Manufacturers and materials specified are not intended to limit the selection of equal colors from other manufacturers. In the case of difference between the drawings and specifications, colors identified in this specification govern.

2.2 EXTERIOR FINISHES

Not used.

2.3 INTERIOR FINISHES

2.3.1 Interior Floor Finishes

Provide flooring materials to match the colors listed below.

2.3.1.1 Concrete (Paint)

2.3.1.2 Industrial Floor Coating

2.3.2 Interior Base Finishes

Provide base materials to match the colors listed below.

2.3.2.1 Resilient Base and Moldings

2.3.2.2 Integral Cove Base

2.3.2.3 Paint

2.3.3 Interior Wall Finishes

Not used.

2.3.4 Interior Ceiling Finishes

Not used.

2.3.5 Interior Trim

Provide interior trim to match the colors listed below.

2.3.5.1 Metal Stairs

2.3.5.2 Bollards

2.4 PLACEMENT SCHEDULE

Placement of color to be in accordance with the following schedule:

PART 3 EXECUTION

Not Used

-- End of Section --