UFGS 01 57 19.01 20 Supplemental Temporary Environmental Controls.pdf

USACE / NAVFAC / AFCEC / NASA UFGS-01 57 19.01 20 (November 2015)

Change 5 - 08/21

Preparing Activity: NAVFAC Superseding UFGS-01 57 19.01 20 (February 2010) UFGS-01 57 19.02 (January 2008)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated April 2022

SECTION TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 01 57 19.01 20

SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS

11/15, CHG 5: 08/21

PART 1 GENERAL

1.1 REFERENCES

1.2 DEFINITIONS

1.2.1 Dangerous Waste

1.2.2 Encountered Waste

1.2.3 Firewood

1.2.4 Fugitive Dust

1.2.5 Ozone Depleting Substance (ODS) Substitute

1.2.6 Refrigerant

1.2.7 Refuse

1.2.8 Sewage

1.2.9 Spill Event

1.2.9.1 Reportable Release

1.2.9.2 Non-emergency Spill Event

1.2.10 Timber, Merchantable

1.2.11 Nonroad Engine

1.2.12 Landfill-Controlled Waste

1.2.13 Universal Waste

1.3 SUBMITTALS

1.4 MID-ATLANTIC

1.4.1 Virginia

1.4.1.1 Definition and Disposal Requirements of Empty Paint Cans

1.4.1.2 Erosion and Sediment Control Measures and Stormwater

Management

1.4.1.2.1 Erosion and Sediment Control

1.4.1.2.2 Construction Dewatering

1.4.1.3 Virginia Stormwater Management

1.4.1.3.1 Stormwater General Permit for Construction Activities

Registration Statement

1.4.1.3.2 Stormwater General Permit Inspection Reports

1.4.1.4 Asbestos Abatement and Notification Procedures

1.4.1.4.1 Best Management Practices

SECTION 01 57 19.01 20 Page 1

1.4.1.4.2 Asbestos Waste Disposal

1.4.1.5 Hazardous Waste Requirements for Virginia Installations:

1.4.1.5.1 Demolition

1.4.1.5.2 Hazardous and Universal Waste Generation

1.4.1.5.3 Waste Management - Disposal by the Contractor

1.4.1.5.3.1 Contractor Site Custodian

1.4.1.5.3.2 Waste Accumulation

1.4.1.5.3.3 Waste Disposal

1.4.1.5.4 Waste Management - Disposal by the Navy

1.4.1.5.4.1 Contractor Site Custodian

1.4.1.5.4.2 Waste Accumulation

1.4.1.5.4.3 Waste Disposal

1.4.1.5.5 Excavation

1.4.1.5.6 Painting and Paint Removal

1.4.1.5.7 Dumpsters

1.4.1.6 Air Requirements:

1.4.1.6.1 Concrete Crushing

1.4.1.7 Spill Response and Reporting

1.4.2 Maryland

1.4.3 West Virginia

1.4.4 Pennsylvania

1.4.5 New Jersey

1.4.6 North Carolina

1.4.6.1 Camp Lejeune

1.4.6.1.1 Removal of Waste from Camp Lejeune

1.4.6.1.2 Surplus Soils Disposal for Camp Lejeune & MCAS New

River

1.4.6.2 MCAS Cherry Point

1.4.7 New York

1.4.8 Maine

1.4.9 District of Columbia

1.5 NORTHWEST (Washington)

1.5.1 Contractor Employee Training Records

1.5.1.1 Waste Originator Training for NBK Bangor

1.5.1.2 Waste Originator Training for NBK Keyport

1.5.1.3 Waste Originator Training for NBK Bremerton

1.5.1.4 Waste Originator Training for NBK Everett

1.5.2 Refrigerant Work Checklist

1.5.3 Environmental Protection Plan (EPP)

1.5.3.1 Solid Waste Management

1.5.3.2 Control and Management of Hazardous Waste

1.5.3.2.1 Dangerous Waste Turn-in

1.5.3.2.1.1 Naval Base Kitsap (NBK) Bangor

1.5.3.2.1.2 Naval Base Kitsap (NBK) Keyport

1.5.3.2.1.3 Indian Island

1.5.3.2.2 Dangerous Waste Disposal

1.5.3.3 Stormwater Management and Control

1.5.3.4 Clean Air Act Compliance for [NBK Bangor][NBK Keyport][NBK

Bremerton][Everett]

1.5.3.5 Clean Air Act Compliance for Whidbey Island and Indian

Island

1.5.3.6 Notice of Construction (NOC) and Notice of Completion

Licenses and Permits

1.6 SOUTHEAST

1.6.1 Florida

1.6.1.1 Naval Air Station (NAS) Jacksonville

1.6.1.1.1 Definition: Petroleum-Contaminated Waste

1.6.1.1.2 Environmental Protection Requirements

1.6.1.1.3 Employee Training Records

SECTION 01 57 19.01 20 Page 2

1.6.1.1.4 Control and Management of Hazardous Waste

1.6.1.1.5 Battery Disposal

1.6.1.1.6 Mercury Containing Devices Management and Disposal

1.6.1.2 Naval Air Station (NAS) Pensacola

1.6.1.2.1 Excavation Permits

1.6.2 Georgia

1.6.3 Mississippi

1.6.3.1 Naval Construction Battalion Command (NCBC) Gulfport

1.6.3.1.1 Excavation Permits

1.6.3.2 Naval Air Station (NAS) Meridian

1.6.3.2.1 Contractor Hazardous Material Inventory Log

1.6.4 South Carolina

1.6.5 Texas

1.6.6 Cuba

1.6.6.1 Naval Station, Guantanamo Bay (GTMO)

1.6.6.1.1 Contractor Liabilities for Environmental Protection

1.6.6.1.2 Licenses and Permits

1.6.6.1.3 Environmental Protection Plan (EPP)

1.7 SOUTHWEST

1.7.1 Arizona

1.7.1.1 Regulatory Requirements for the Notice of Intent (NOI)

1.7.2 California

1.7.2.1 Regulatory Requirements for the Notice of Intent

1.7.2.2 Stormwater Notice of Termination

1.7.2.3 Sampling and Analysis of Hazardous Waste

1.7.3 Nevada

1.7.3.1 Regulatory Requirements for the Notice of Intent

1.8 PACIFIC

1.8.1 Control and Disposal of [Ionization Smoke Detectors][Tritium

Exit Signs]

1.8.1.1 Material Bagging

1.8.1.2 Material Storage

1.8.1.3 Storage Site and Disposal

1.8.1.4 Storage and Disposal by Contractor

1.8.2 Hawaii

1.8.3 Guam

1.8.4 Japan

1.9 EUROPE

1.9.1 Italy

1.9.2 Spain

1.9.3 Greece

PART 2 PRODUCTS

PART 3 EXECUTION

3.1 NORTHWEST (Washington)

3.1.1 Protection of Natural Resources

3.1.1.1 Erosion and Sediment Control Measures

3.1.1.2 Erosion and Sediment Control Inspection Reports

3.1.1.3 Stormwater Notice of Intent for Construction Activities and Storm Water Pollution Prevention Plan

3.1.1.3.1 Stormwater NOI

3.1.1.3.2 Public Notice

3.1.1.4 Stormwater NOT

3.1.1.5 Stormwater Inspection Reports for General Permit

3.1.1.6 Water Resources

3.1.1.7 Stormwater Drainage and Construction Dewatering

SECTION 01 57 19.01 20 Page 3

3.1.1.8 Groundwater

3.1.1.9 Merchantable Timber

3.1.2 Historical and Archaeological Resources

3.1.3 Concrete Operations

3.1.3.1 Washing of Concrete Truck at [NBK

Bremerton][Everett][Whidbey Island]

3.1.3.2 Washing of Concrete Truck at [Indian Island][NBK

Bangor][NBK Keyport]

3.1.4 Control and Management of Solid Waste at Whidbey Island

3.1.5 Control and Management of Solid Waste at NBK Bremerton

3.1.6 Wastewater Discharge [NBK Bremerton][Everett][Whidbey Island]

3.1.6.1 Discharge at NBK Bremerton

3.1.6.2 Discharge at Everett

3.1.6.3 Hydrotest Water Discharge at NBK Bremerton

3.1.7 Control and Disposal of Landfill-Controlled Waste

3.1.8 Waste Determination Documentation

3.1.8.1 Waste Information Specification Form for NBK Bangor

3.1.8.2 Waste Information Sheet Form for Everett

3.1.8.3 Waste Information Sheet Form for NBK Bremerton

3.1.8.4 Waste Generation Record for[ Indian Island][ NBK Keyport][

Whidbey Island]

3.1.8.5 Control of Waste Without Documented Waste Determination

3.1.8.6 Laboratory Analysis

3.1.9 Contractor Hazardous Material Inventory Log

3.1.10 Hazardous Materials Prohibition

3.1.11 Solid Waste Management Report

3.1.12 Fuel Tanks

3.1.13 Releases and Spills of Oil and Hazardous Substances

3.1.14 Control and Management of Hazardous Waste

3.1.14.1 Facility Hazardous Waste Generator Status

3.1.14.2 Hazardous Waste Management

3.1.14.3 Contractor-Generated Hazardous Waste

3.1.14.4 Encountered Waste

3.1.14.5 Certificate of Final Disposal (CFD)

3.1.14.6 Regulated Waste Storage, Satellite Accumulation, and

90-Day Storage Areas

3.1.14.7 Vacuum Cleaners

3.1.14.8 Class I and Class II ODS Prohibition

3.1.15 Noise

3.1.16 Drinking Water

3.1.16.1 Project Report

3.1.16.2 Public Works Department Permit

3.1.16.3 Project Completion Report

3.1.16.4 Disinfection of Water System Components

3.1.17 Contractor's Operation and Maintenance (O&M) Plan

3.1.18 Emission Standards

3.1.18.1 Volatile Organic Compound Emission Control

3.2 SOUTHEAST

3.2.1 Florida

3.2.1.1 Laboratory Analysis

3.2.1.2 Waste Storage/Satellite Accumulation

3.2.1.3 Control and Management of Hazardous Waste

3.2.1.3.1 Universal Waste

3.2.1.3.2 Mercury Containing Materials

3.2.1.3.3 Aerosol Cans Management and Disposal

3.2.1.3.4 Disposal of Regulated Waste

3.2.1.3.5 Disposal of Petroleum Contaminated Waste

3.2.1.4 Dumpsters

3.2.2 Cuba

SECTION 01 57 19.01 20 Page 4

3.2.2.1 Fish and Wildlife Resources

3.2.2.2 Protection of Erodible Soils

3.2.2.3 Control and Management of Solid Waste

3.2.2.3.1 Disposal of Solid Waste and Debris

3.2.2.3.1.1 Base Sanitary Landfill and Concrete Areas

3.2.2.3.2 Disposal of Rubbish and Debris

3.2.2.3.2.1 Permitted Material in Landfill

3.2.2.3.2.2 Metals Disposal

3.2.2.4 Sewage

3.2.2.5 Control and Disposal of Hazardous Waste

3.2.2.5.1 Hazardous Waste Generation

3.2.2.5.2 Hazardous Waste Disposal

3.2.2.5.3 Hazardous Waste Accumulation

3.2.2.5.3.1 Site Storage

3.2.2.5.3.2 Turn-In

3.2.2.5.4 Spills of Oil and Hazardous Materials

3.2.2.5.5 Oily and Hazardous Substances

3.2.2.5.6 Lead-Acid Batteries

3.2.2.5.7 Mercury Controls

3.2.2.5.8 Petroleum Products

3.2.2.5.9 Class I and Class II Ozone Depleting Substances (ODS)

3.2.2.5.10 Vegetation

3.2.2.5.11 Contract Completion and Close-Out

ATTACHMENTS:

Table 1 - Spill Reporting Contact Number

Refrigerant Work Checklist

Groundwater/Stormwater Flow Chart

Storm Drain and Sanitary Sewer Discharge Approval

Estimated Waste Table

Encountered Waste Summary

Waste Generation Record (WGR)

PSNS 5090/132 CHMI

Contractor Request for 45/90-Day Hazardous Waste Accumulation Certification/Recertification

Contractor Request for Hazardous Waste Satellite Accumulation Area (SAA) Registration

Accumulation Area Inspection Record

Hazardous Waste Accumulation Area Registration Form

-- End of Section Table of Contents --

SECTION 01 57 19.01 20 Page 5

USACE / NAVFAC / AFCEC / NASA UFGS-01 57 19.01 20 (November 2015)

Change 5 - 08/21

Preparing Activity: NAVFAC Superseding UFGS-01 57 19.01 20 (February 2010) UFGS-01 57 19.02 (January 2008)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated April 2022

SECTION 01 57 19.01 20

SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS

11/15, CHG 5: 08/21

NOTE: This guide specification covers the requirements for state and local environmental protection and for environmental temporary controls. The purpose of this document is to supplement Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS with specific State and Local requirements.

Coordinate with and do not repeat what is already provided in the Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS. Edit section thoroughly to delete paragraphs not applicable to project. Use this section for both Design-Bid-Build and Design-Build projects.

To assist specification editors and Contractors with finding all of the pertinent sections, the requirements are arranged by Region, then State and Installation. Rather than writing the same State requirement for every installation in a given state, the requirement should be listed under that state.

If a requirement only applies at a specific installation, list it under the appropriate installation.

Many States and Municipalities have more stringent or additional requirements. Modify this section to include State and Local differences as required to suit local conditions and regulations.

Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable item(s) or insert appropriate information.

Remove information and requirements not required in

SECTION 01 57 19.01 20 Page 6 respective project, whether or not brackets are present.

Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).

To download UFGS Forms, Graphics, and Tables, go to:

http://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs/forms-graphics-tables

NOTE: Select the appropriate FEC/Region where work is being done and delete the un-used Regions.

PART 1 GENERAL

1.1 REFERENCES

NOTE: These references are only for State specific requirements and supplement the references in Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS.

NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.

Use the Reference Wizard's Check Reference feature when you add a Reference Identifier (RID) outside of the Section's Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizard's Check Reference feature to update the issue dates.

References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only. If state or local references are not provided here, refer to Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS for appropriate references.

NOTE to FEC: For each state listed below, the FEC should edit the section to include state or local specific references that will be called out in later portions of this document.

SECTION 01 57 19.01 20 Page 7

Reference lists are tailored by each FEC.

ASTM INTERNATIONAL (ASTM)

ASTM E2356 (2018) Standard Practice for Comprehensive Building Asbestos Surveys

INSTRUCTIONS AND STANDARDS FOR NAVBASE GUANTANAMO BAY CUBA

(COMNAVBASEGTMOINST)

1710.10 Outdoor Recreational and Wildlife

Instruction

4400.2A Consolidated Hazardous Material Reutilization and Inventory Management Program

5090.1 Hazardous Waste Management Plan

5090.4 Standard Operating Procedures for Landfill

5090.7 Pollution Control Procedures for Oil and

Hazardous Substances

5090.8 Asbestos Program Management

5100.13 Hazardous Material/Excess Hazardous

Material Control and Safety Program

FGS (1994) Final Governing Standards for Environmental Protection by U.S. Forces in Cuba

PUGET SOUND CLEAN AIR AGENCY (PSCAA)

PSCAA Regulation Regulation I, II, and III

STATE OF VIRGINIA ADMINISTRATIVE CODE (VAC)

9 VAC 25-840 Title 9, Agency 25, Chapter 840: Erosion And Sediment Control Regulations

9 VAC 25-850 Title 9, Agency 25, Chapter 850: Erosion And Sediment Control And Stormwater Management Certification Regulations

9 VAC 25-870 Title 9, Agency 25, Chapter 870: Virginia Stormwater Management Program (VSMP) Regulation

U.S. DEPARTMENT OF DEFENSE (DOD)

DOD 4715.05-G (2007) Overseas Environmental Baseline Guidance Document

SECTION 01 57 19.01 20 Page 8

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA)

EPA SW-846 (Third Edition; Update IV) Test Methods for Evaluating Solid Waste:

Physical/Chemical Methods

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

40 CFR 82 Protection of Stratospheric Ozone

40 CFR 260 Hazardous Waste Management System: General

40 CFR 261 Identification and Listing of Hazardous Waste

40 CFR 262 Standards Applicable to Generators of Hazardous Waste

40 CFR 263 Standards Applicable to Transporters of Hazardous Waste

40 CFR 264 Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities

40 CFR 265 Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities

40 CFR 355 Emergency Planning and Notification

49 CFR 171 General Information, Regulations, and Definitions

49 CFR 172 Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements

49 CFR 178 Specifications for Packagings

77 FR 12286 Final National Pollutant Discharge Elimination System (NPDES) General Permit for Stormwater Discharges from Construction Activities

WASHINGTON STATE ADMINISTRATIVE CODE (WAC)

WAC-173-60 Maximum Environmental Noise Levels

WAC-173-160 Minimum Standards for Construction and Maintenance of Wells

WAC-173-303 Washington Dangerous Waste Regulations

WAC-173-303-330 Personnel Training

WAC-173-303-573 Standards for Universal Waste Management

SECTION 01 57 19.01 20 Page 9

WAC-173-303-573(2) Standards for Universal Waste Management - Batteries

WAC-173-303-573(3) Standards for Universal Waste Management - Mercury-containing Equipment

WAC-173-303-573(5) Standards for Universal Waste Management - Lamps

WAC-173-350 Solid Waste Handling Standards

WAC-222-30 Timber Harvesting

WAC-246-290 Department of Health Drinking Water Regulation

WASHINGTON STATE DEPARTMENT OF ECOLOGY (WSDE)

WSDE SMM (2014) Washington State Stormwater Management Manual for Western Washington

1.2 DEFINITIONS

NOTE: This article contains tailoring tags for, and is for, NAVFAC NW projects only.

1.2.1 Dangerous Waste

Waste defined as dangerous waste in accordance with WAC-173-303. This includes, but is not limited to, hazardous waste, extremely hazardous waste and state-only dangerous waste.

1.2.2 Encountered Waste

Material that is of Government origin that becomes a waste during construction at or on Government property. This term includes both foreseen and unforeseen Government waste discovered at the worksite.

1.2.3 Firewood

Raw, woody material cut into short lengths and burned to produce energy.

1.2.4 Fugitive Dust

Particulate matter or any visible air contaminant (smoke, dust, or fume) other than uncombined water that is not collected by a capture system and emitted from a stack, but is released to the atmosphere at the point of generation.

1.2.5 Ozone Depleting Substance (ODS) Substitute

Any chemical or product, whether existing or new, that is used by any person as an EPA-approved replacement for a Class I or Class II ODS in a given refrigeration or air-conditioning end-use.

SECTION 01 57 19.01 20 Page 10

1.2.6 Refrigerant

Any substance consisting in part or whole of a Class I or Class II ODS, or an ODS substitute that is used for heat transfer purposes and provides a cooling effect.

1.2.7 Refuse

Includes, but is not limited to garbage, rubbish, trash, some soils, and non-painted demolition and construction debris. The Government will designate refuse. When designated as "refuse," the Government has determined the waste is not "Dangerous Waste."

1.2.8 Sewage

Liquid waste designated by the Government as "domestic sanitary sewage" and normally discharged through domestic sanitary sewage systems. Liquids designated as "sewage" include human body waste, and wastewater from sinks, showers, laundries, dishwashers, and garbage disposals when these liquids use only chemicals approved by the Government for discharge into the sanitary sewer.

1.2.9 Spill Event

A spill is any release of oil or hazardous substances to the water or ground that is not controlled or permitted. This includes any spilling, leaking, pumping, emitting, discharging, injecting, escaping, leaching, disposing, or dumping of liquid or solid material that is not authorized in writing by the Contracting Officer.

1.2.9.1 Reportable Release

A reportable release means any spilling, leaking, pumping, pouring, emitting, emptying, discharging, injecting, escaping, leaching, dumping, or disposing into the environment of a known or unknown material or hazardous substance that poses an immediate threat to human health or the environment to the air, soil, or water. Reportable releases are: a sheen of oil on the water; a violation of the Installation's or project's water permit (NPDES permit); A sewage spill that threatens human health or the environment; a Comprehensive Environmental Response, Compensation, and Liability Act reportable quantity for hazardous/toxic substances (40 CFR 302); an air or hazardous substance release that is a threat to human health or the environment, or released outside the facility boundaries;

any discharge from an underground storage tank regulated under WAC 173-360; or oil spilled to the ground or to permeable secondary containment of 160 liters 42 gallons and greater.

1.2.9.2 Non-emergency Spill Event

A non-emergency spill event is a discharge of a known material or any hazardous substance that does not pose an immediate threat to human health or the environment, can be cleaned up as part of normal housekeeping by the personnel who discovered the spill, and is not released on the soil or into any waterway inlet (for example, storm drain) or outside Navy property boundaries.

1.2.10 Timber, Merchantable

Any raw material yielded by a forest that is of a size, quality and

SECTION 01 57 19.01 20 Page 11 condition suitable for marketing under given economic conditions, even if it is situated such that it is not immediately accessible for logging.

1.2.11 Nonroad Engine

Any internal combustion engine, except motor vehicle (highway engines, stationary engines, or engines that remain at one location for more than 12 months), engines used solely for competition, or engines used in aircraft. This definition is based on the principle of mobility and portability, and includes engines installed on (1) self-propelled equipment, (2) equipment that is propelled while performing its function, or (3) equipment that is portable or transportable, as indicated by the presence of wheels, skids, carrying handles, dolly, trailer, or platform.

Examples of regulated applications include farm tractors, excavators, bulldozers, wheel loaders, backhoe loaders, road graders, diesel lawn tractors, logging equipment, portable generators, skid steer loaders, or forklifts.

[1.2.12 Landfill-Controlled Waste

Waste containing harmful substances but not designated as dangerous in accordance with WAC-173-303 that are screened by a receiving facility to ensure that it meets the requirements of their operating permit. Examples include petroleum-contaminated soil, abrasive blast grit, street or dry-dock sweepings, treated wood, oily debris, and waste containing free liquids as determined by the Paint Filter Liquids Test method 9095.

]1.2.13 Universal Waste

Any of the following dangerous waste that are subject to the universal waste requirements of WAC-173-303-573: Batteries as described in WAC-173-303-573(2)); Lamps as described in WAC-173-303-573(5);

Mercury-containing equipment as described in WAC-173-303-573(3).

1.3 SUBMITTALS

NOTE: Review Submittal Description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list, and corresponding submittal items in the text, to reflect only the submittals required for the project. The Guide Specification technical editors have classified those items that require Government approval, due to their complexity or criticality, with a "G." Generally, other submittal items can be reviewed by the Contractor's Quality Control System. Only add a "G" to an item if the submittal is sufficiently important or complex in context of the project.

For Army projects, fill in the empty brackets following the "G" classification, with a code of up to three characters to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: "AE" for Architect-Engineer; "DO" for District Office (Engineering Division or other organization in the District Office); "AO" for Area Office; "RO" for Resident Office; and "PO" for Project Office. Codes

SECTION 01 57 19.01 20 Page 12 following the "G" typically are not used for Navy, Air Force, and NASA projects.

The "S" classification indicates submittals required as proof of compliance for sustainability Guiding Principles Validation or Third Party Certification and as described in Section 01 33 00 SUBMITTAL

PROCEDURES.

Choose the first bracketed item for Navy, Air Force, and NASA projects, or choose the second bracketed item for Army projects.

NOTE: Add additional statement to include State or Local submittal requirements. Submittals added here must be called for and explained in the specification paragraph text within.

Delete any inapplicable submittal requirements.

NOTE: NOTE: For Navy Design-Build projects, delete 01 33 00 SUBMITTAL PROCEDURES, and replace with UFGS 01 33 00.05 20 CONSTRUCTION SUBMITTAL PROCEDURES and

UFGS 01 33 10.05 20 DESIGN SUBMITTAL PROCEDURES.

Government approval is required for submittals with a "G" or "S" classification. Submittals not having a "G" or "S" classification are [for Contractor Quality Control approval.][for information only. When used, a code following the "G" classification identifies the office that will review the submittal for the Government.] Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals

NOTE: For projects in the NAVFAC PAC Area of Operation, and for the submittals identified as SD-01 Preconstruction SubmittalS, remove the "G" designation.

Excavation Permits; G[, [_____]]

NOTE: Include the following submittal for NAVFAC PAC projects.

Storage Material Inventory; G[, [_____]]

NOTE: Include the following submittal for NBK Bangor, NBK Keyport, NBK Bremerton, NAVSTA Everett.

SECTION 01 57 19.01 20 Page 13

PSCAA Nonroad Engine Notification Form; G[, [_____]]

NOTE: Include the following submittal for construction of a new air pollution source. At NBK Bangor, NBK Keyport, NBK Bremerton, and Everett choose PSCAA. At Indian Island, choose ORCAA. At Whidbey, choose NWCAA.

Notice of Construction, [PSCAA][ORCAA][NWCAA]; G[, [_____]]

Contractor's Operation and Maintenance (O & M) Plan

Project Report

Waste Originator Training Certification; G[, [_____]]

SD-07 Certificates

NOTE: Include the following for NBK Bremerton and NAVSTA Everett.

Storm Drain and Sanitary Sewer Discharge Approval; G[, [_____]]

Waste Determination Documentation; G[, [_____]]

Monthly Project Waste Summary Report

Landfill Disposal Form; G[, [_____]]

Hazardous Waste Accumulation Area Registration Form

Contractor Request for Hazardous Waste Satellite Accumulation Area (SAA) Registration; G[, [_____]]

Contractor Request for 45/90-Day Hazardous Waste Accumulation Certification/Recertification; G[, [_____]]

Accumulation Area Inspection Record

Dangerous Waste Profile; G[, [_____]]

Dangerous Waste Manifests; G[, [_____]]

NOTE: Include the following submittal for Whidbey and NAVSTA Everett.

Certificate Of Final Disposal; G[, [_____]]

SD-11 Closeout Submittals

SECTION 01 57 19.01 20 Page 14

NOTE: Select ORCAA for Indian Island, NWCAA for Whidbey, or PSCAA for Everett, NBK Bangor, NBK Bremerton, and NBK Keyport.

Notice of Completion, [PSCAA][NWCAA][ORCAA]

NOTE: Use the following submittal for NBK Bremerton and Whidbey.

Solid Waste Tracking Sheet

NOTE: Use the following submittal for NBK Keyport, NBK Bangor, NAVSTA Everett, and Indian Island.

Refuse and Recycle Quantity Form; G[, [_____]]

Project Completion Report; G[, [_____]]

Refrigerant Work Checklist; G[, [_____]]

Operation and Maintenance Records (Air Pollution Sources)

1.4 MID-ATLANTIC

NOTE: Applicable environmental requirements such as; erosion/sediment control, storm water, hazardous waste, and solid waste may have unique state regulations that exceed the requirements of Section 01 57 19, TEMPORARY ENVIRONMENTAL CONTROLS. Edit this section to include these unique state requirements for each state listed below.

NOTE: For each installation, provide the following:

1. Unique local requirements that exceed Section

01 57 19, TEMPORARY ENVIRONMENTAL CONTROLS

requirements and state regulations.

2. Environmental Point of Contact information for design review and base specific requirements.

3. For every installation in area of responsibility, the FEC must identify the facility Hazardous Waste Generator status as specified in Section 01 57 19 paragraph FACILITY HAZARDOUS WASTE GENERATOR STATUS.

4. For each installation listed below, provide specific requirements of the installation's Environmental Management System (EMS) that relate to construction operations. Identify those site specific EMS actions that the Contractor must perform under this contract.

Comply with the following state, regional, and local requirements which

SECTION 01 57 19.01 20 Page 15 supplement Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS.

1.4.1 Virginia

NOTE: The following paragraphs apply to Hampton Roads Installations (Norfolk Naval Station, NAS Oceana, Dam Neck Annex, JEB Little Creek/Fort Story, Norfolk Naval Shipyard, NWS Yorktown, NSA Hampton Roads) Modify and add requirements if used for other Installations in Virginia according to their practices.

1.4.1.1 Definition and Disposal Requirements of Empty Paint Cans

Paint Cans: Paint cans that are empty (free of liquids and contains less than 2.54 cm one inch of dried material) of paints, solvents, thinners and adhesives may be disposed of in dumpsters.

Metal paint cans that meet the empty standard can be placed in dumpsters marked "metal only"; plastic cans may be placed in solid waste dumpsters.

Manage paint cans with liquid or more than 2.54 cm one inch of solidified oil-based paint as a hazardous waste and label properly. Manage paint cans with excess water-based paint as non-hazardous waste. Contact NAVFAC MIDLANT Environmental Services for management requirements.

1.4.1.2 Erosion and Sediment Control Measures and Stormwater Management

1.4.1.2.1 Erosion and Sediment Control

NOTE: Use this paragraph where land disturbance is 929 square meters 10,000 square feet or greater.

Submit an erosion and sediment control plan, and comply with the requirements specified in the Virginia Erosion and Sediment Control Law and Regulations. (Virginia Code: 9 VAC 25-840). Obtain a Certificate of Competency in accordance with 9 VAC 25-850.

1.4.1.2.2 Construction Dewatering

Construction site stormwater runoff must be treated using proper erosion control measures or stormwater management practices prior to release from the construction site. Pollutants, including but not limited to chemicals, fuels, lubricants, sewage, paints, sedimentation, and other harmful materials must not be discharged into or alongside any river, stream, or impoundment, or into any channels leading to them. Implement appropriate erosion and sediment control measures to all disturbed areas or bare soils to prevent unauthorized offsite sedimentation. Apply stabilization measures to denuded portions of a project that are at final grade or where work has temporarily ceased within 7 days.

1.4.1.3 Virginia Stormwater Management

NOTE: Use this paragraph where land disturbance is 4047 square meters one acre or greater.

SECTION 01 57 19.01 20 Page 16

Where land disturbance is equal to or exceeds 4046 square meters one acre, prepare and submit a Stormwater Pollution Prevention Plan (SWPPP) and comply with the requirements specified in the Virginia Stormwater Management Law and Regulations (Virginia Code: 9 VAC 25-870). Obtain Certificate of Competency in accordance with 9 VAC 25-850.

1.4.1.3.1 Stormwater General Permit for Construction Activities Registration Statement

In accordance with 9 VAC 25-870, submit a Registration Statement to the State to obtain Virginia Stormwater Management Program General Permit coverage, and as required under the General Permit, develop a SWPPP for the project. The SWPPP must meet the requirements of the State General Permit for storm water discharges from construction activities. Submit the Registration Statement and appropriate permit fees to the appropriate state agency for approval a minimum of 15 calendar days prior to the start of any land disturbing activities. Maintain an approved copy of the SWPPP at the onsite construction office, and continually update as regulations require, reflecting current site conditions.

Coverage under this permit requires the Contractor to prepare a SWPPP, prepare and submit a Registration Statement and provide the permit fee to the responsible state agency before any land disturbing activities begin.

File for permit coverage on behalf of both the Contractor and the Construction Officer, and file a Notice of Termination once construction is complete and the site is stabilized with a final sustainable cover.

Install, inspect, maintain best management practices (BMPs), and submit stormwater BMP inspection reports and SWPPP inspection reports as required under the terms and conditions of the permit. Ensure construction operations and management comply with the terms and conditions of the general permit for stormwater discharges from construction activities.

1.4.1.3.2 Stormwater General Permit Inspection Reports

Complete and document, in the SWPPP Notebook, the Stormwater Inspection Reports as required by the State VSMP General Permit. The Stormwater inspections reports must include items required by the General Permit and must be completed at the inspection frequency detailed in 9 VAC 25-870.

Obtain certificate of competency in accordance with 9 VAC 25-850.

1.4.1.4 Asbestos Abatement and Notification Procedures

Structures must be surveyed for the presence of asbestos prior to demolition or renovation. A structure is defined as including any load-bearing portion of a structure. The survey must be performed by a licensed, certified, accredited asbestos inspector in accordance with

ASTM E2356.

Notify EPA and Virginia Department of Labor and Industry (VADOLI) at least 20 calendar days before start of asbestos abatement if asbestos is expected to total at least 79 Linear Meters 260 LF, 14.9 Square Meters 160 SF, or one cubic meter 35 CF. Provide copies of notifications to the environmental office (Air Manager) through the Contracting Officer prior to beginning work. Make notifications for any project that includes asbestos abatement (and for all demolition projects, regardless of whether asbestos containing materials are present in the structure or facility) in accordance with paragraph DEMOLITION. Notification is not required if

SECTION 01 57 19.01 20 Page 17 asbestos is nonfriable asbestos containing roofing, flooring, or siding materials that when installed, encapsulated, or removed do not become friable. If the material is damaged, the matrix binding the asbestos fibers has deteriorated, or mechanical removal results in more-than-incidental breakage, then notification is required. Activities such as grinding, mechanical chipping, sawing or drilling can make the asbestos containing material friable and would require notification.

1.4.1.4.1 Best Management Practices

Use BMPs to ensure EPA and VADOLI requirements are met, including:

preventing airborne emissions via wetting asbestos prior to removal; using glove bags or containment; using HEPA-filtered vacuum or ventilation systems; restricting access to asbestos-control areas until thoroughly cleaned and inspected, and acceptable air-samples have been received.

Consideration should be given to other environmental program requirements such as Clean Water Act (CWA) requirements when making decisions regarding BMPs.

1.4.1.4.2 Asbestos Waste Disposal

For asbestos waste disposal, phone the NAVFAC MIDLANT Environmental (EV) Service Desk to arrange pick up in your area. A manifest must be signed by this office prior to waste being removed from the installation.

Provide copies of manifests and notifications to NAVFAC Mid-Atlantic EV Hazardous Waste (HW) Program Manager.

1.4.1.5 Hazardous Waste Requirements for Virginia Installations:

1.4.1.5.1 Demolition

Remove the following items from the site prior to demolition:

polychlorinated biphenyls (PCBs), fluorescent bulbs, mercury and metal components (such as furnaces, ducts, and piping), and any hazardous materials. Manage lead, fluorescent bulbs, mercury-containing equipment, and any other waste as "hazardous or universal waste" as appropriate (see paragraph HAZARDOUS AND UNIVERSAL WASTE GENERATION). If the demolition activity encompasses the whole building (the building must be demolished to the ground), the resulting construction debris (including lead paint) requires Toxicity Characteristic Leaching Procedure (TCLP) analysis to make a waste determination and ensure proper management and disposal before it can be disposed as solid waste.

1.4.1.5.2 Hazardous and Universal Waste Generation

NOTE: Activity Hazardous Material Reutilization, Hazardous Waste Minimization and Disposal Guide is available for download at http://www.wbdg.org/ffc/ dod/unified-facilities-guide-specifications-ufgs/forms-graphics-tables

Hazardous and Universal Waste includes fluorescent bulbs, PCB ballast, lead paint, and mercury-containing equipment. Contact the EV HW Program Manager to set up an appropriate accumulation area. Manage waste in a satellite accumulation area (SAA), hazardous waste accumulation area (HWAA), or universal waste accumulation area (UWAA) as directed by the EV HW Program Manager through the Contracting Officer. Keep containers

SECTION 01 57 19.01 20 Page 18 securely closed unless adding or removing material and waste. Ensure custodians managing the accumulation area(s) have appropriate training that has been taken within the year prior to the area being established.

Training is an annual requirement that can be taken on the https://environmentaltraining.ecatts.

com/ site. Keep copies of training records and certificates on site.

Hazardous Waste Accumulation Areas (less than 90-day sites) require Virginia Department of Environmental Quality (VDEQ) notification. Notify the HA Media Manager (HW MM) 14 days prior to the start of waste accumulation. The EV HW Program Manager is authorized to notify VDEQ when Hazardous Waste Accumulation Areas are established. A copy of the Activity Hazardous Material Reutilization, Hazardous Waste Minimization and Disposal Guide will be provided by the Contracting Officer. For waste disposal, phone the NAVFAC MIDLANT EV Service Desk to arrange pick up in your area. Fax a completed DD 1348-1A to the Service Desk for all waste turn-ins. Notify the Service Desk if any containers are leaking or are in poor condition. A representative from NAVFAC MIDLANT EV Services is the authorized entity approved to sign manifests for off-site waste disposal.

[1.4.1.5.3 Waste Management - Disposal by the Contractor

NOTE: Coordinate with the installation EV to determine whether paragraph WASTE MANAGEMENT - DISPOSAL BY THE CONTRACTOR or paragraph WASTE MANAGEMENT - DISPOSAL BY THE NAVY is applicable for the project's location.

Manage and dispose of all Hazardous Waste generated or discovered during the project. Dispose of all waste in accordance with all federal and state environmental regulations. Sign and submit all paperwork (lab analyses, profiles, manifests) and records to the Navy. Allow inspection by the Regional Environmental Core for compliance with federal, state and Navy requirements.

1.4.1.5.3.1 Contractor Site Custodian

a. Designate a Site Custodian and an Alternate for waste management.

Provide 24-hour phone numbers where Site Custodian and alternate can be contacted in the event of an emergency.

b. Personnel must be trained in hazardous waste management procedures to comply with the requirements of 40 CFR 262.34 and 40 CFR 265.16.

1.4.1.5.3.2 Waste Accumulation

a. Establish a SAA, UWAA or a temporary 90-Day HWAA for waste accumulation. Obtain the HW Media Manager approval. Do not use accumulation areas as lay-down areas.

b. EV Core HW MM will notify VDEQ. Notify the HW MM 14 days prior to the start of waste accumulation. All agency notifications will originate from the Regional Environmental Core.

c. The Site Custodian and Alternate must attend the HW MM training session for the management of the SAA, UWAA or HWAA.

SECTION 01 57 19.01 20 Page 19

1.4.1.5.3.3 Waste Disposal

a. The Navy will be considered the "generator" for any and all waste that are generated on Navy property, regardless if the waste was generated as result of Contractor activity.

b. Pack, mark, label and transport all waste in accordance with Department of Transportation 49 CFR Regulations.

c. Obtain the EPA Hazardous Waste Identification Number (EPA ID#) for the installation or off-site Contractor location, from the EV Core HW MM.

Use the generator's EPA ID# on the Hazardous Waste Manifest.

(1) Provide the name and EPA ID Number for the Hazardous Waste Transporter and the disposal facility to the HW MM.

(2) Submit all waste profiles and documentation supporting the waste disposal to the HW MM for review.

d. Obtain the Hazardous Waste Manifest signature from designated representative of the Regional Environmental Services Group (EV Services). Contact the Environmental Services Department Dispatcher to schedule this service. Obtain signature on the day the waste is scheduled to be picked up.

e. The Contractor is to ensure that the Certificates of Disposal and Manifests are mailed to EV Services, in accordance with the all Federal and State regulations.

][1.4.1.5.4 Waste Management - Disposal by the Navy

NOTE: Coordinate with the installation EV to determine whether paragraph WASTE MANAGEMENT - DISPOSAL BY THE CONTRACTOR or paragraph WASTE MANAGEMENT - DISPOSAL BY THE NAVY is applicable for the project's location.

Coordinate waste management actions with the HW MM responsible for the installation. Manage all hazardous waste in accordance with federal, state and Navy Environmental Regulations. Sign and submit all paperwork (lab analyses, profiles, manifests) and records to the Navy. Allow inspection by the Regional Environmental Core for compliance with federal, state and Navy requirements.

1.4.1.5.4.1 Contractor Site Custodian

a. Designate a Site Custodian and an alternate for waste management.

Provide 24-hour phone numbers where Site Custodian or Site Manager and alternate can be contacted in the event of an emergency.

b. Personnel must be trained in hazardous waste management procedures to comply with the requirements of 40 CFR 262.34 and 40 CFR 265.16.

1.4.1.5.4.2 Waste Accumulation

a. Establish a Satellite Accumulation Area (SAA), Universal Waste Accumulation Area (UWAA) or a temporary 90-Day Hazardous Waste

SECTION 01 57 19.01 20 Page 20

Accumulation Area (HWAA) for waste accumulation. Do not use accumulation areas as Contractor lay-down areas.

b. EV Core HW MM will notify VDEQ. Notify the HW MM 14 days prior to the start of waste accumulation. All agency notifications will originate from the Regional Environmental Core.

c. The Site Custodian and alternate must attend the HW MM training session for the management of the SAA, UWAA or HWAA.

d. Manage waste containers in accordance with all applicable Federal, State, and Navy regulations.

1.4.1.5.4.3 Waste Disposal

a. The Navy will be considered the "generator" (EPA definition) for any and all waste that are generated on Navy property, regardless if the waste was generated as result of Contractor activity.

b. Obtain a Job Order Number from the NAVFAC MIDLANT Financial Management Business Line, Accounts Receivable Department.

c. Submit all waste profiles and documentation supporting the waste disposal to the HW MM for review.

d. Coordinate with the HW MM for waste pickup by EV Services. EV Services will pick up the waste and coordinate transport to an off-site permitted Treatment Storage or Disposal facility.

e. Obtain the Hazardous Waste Manifest signature from designated representative of the Regional EV Services. Contact the Environmental Services Department Dispatcher to schedule this service. Obtain signature on the day the waste is scheduled to be picked up.

]1.4.1.5.5 Excavation

If soil is to be reused onsite, sampling is not required unless otherwise directed. Excavated soil may be reused within the construction site with no testing necessary. Soil may be stockpiled until the end of the project, then reused as much as possible prior to sampling and analysis for residual soil to be disposed. Store in a manner that prevents rain from infiltrating the soil matrix and preventing any runoff into the surrounding soil or pavement (for example, store the soil on top of plastic sheets and covered with plastic sheets or store in lined, covered dumpsters). If the soil is going to be relocated or disposed outside the construction site, sampling and analysis is required. Contact the installation HW Program Manager prior to disposal to determine the appropriate sampling and test parameter. Soil disposal requirements will depend on test results. If soil is to be shipped to a destination outside the fire ant quarantine area (outside of James City County, York County, Chesapeake, Hampton, Newport News, Norfolk, Poquoson, Portsmouth, Suffolk, Virginia Beach, or Williamsburg) it MUST have a valid inspection certificate issued by an Officer of the Plant Protection and Quarantine Program (PPQ) of the U.S. Department of Agriculture. Contact the EV Pest Management Coordinator for additional information.

1.4.1.5.6 Painting and Paint Removal

Air-drying cans for disposal are allowed only if liquid residue is less

SECTION 01 57 19.01 20 Page 21 than 2.54 cm one inch; keep all paint or solvent containers closed and secured when not adding or removing material or waste. Waste paint chips and debris must be collected and sampled to determine the proper disposal method. Contact the NAVFAC MIDLANT EV HW Program Manager for sampling requirements. If waste paint is determined to be hazardous, waste must be managed as hazardous and an appropriate accumulation area must be established. Contact the NAVFAC MIDLANT EV HW Program Manager for site setup.

1.4.1.5.7 Dumpsters

Label trash containers to appropriately describe the contents.

1.4.1.6 Air Requirements:

1.4.1.6.1 Concrete Crushing

Secure an air permit for the crusher from the regulatory agency where the equipment is home-based (in Virginia contact VADEQ). Provide a copy of the permit to the EV Office (Air Program Manager) through the Contracting Officer at least 30 days prior to bringing crusher onsite.

1.4.1.7 Spill Response and Reporting

NOTE: Attach Table 1 - Spill Reporting Contact Numbers, which is available for download at http://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs/forms-graphics-tables

Report spills at Hampton Roads Navy installations to the appropriate installation Emergency Call Center (ECC) immediately upon discovery.

After notifying the installation ECC, notify the Navy point of contact.

Refer to the Installation Hazardous Material Reutilization, Hazardous Waste Minimization and Disposal Guide Appendix 3 for spill contact procedures. Refer to Table 1 - Spill Reporting Contact Number for the appropriate point of contact.

1.4.2 Maryland

a. Patuxent River

1.4.3 West Virginia

a. Sugar Grove

1.4.4 Pennsylvania

1.4.5 New Jersey

1.4.6 North Carolina

1.4.6.1 Camp Lejeune

1.4.6.1.1 Removal of Waste from Camp Lejeune

Remove and dispose of rubbish and debris from Government property.

SECTION 01 57 19.01 20 Page 22

Provide 24-hour advance written notice to the Contracting Office of Contractor's intention to dispose rubbish and debris off base. Disposal at sites or landfills not holding a valid state of North Carolina permit is specifically prohibited. The prohibition also applies to sites where a permit my have been applied for but not yet obtained. If construction debris has been disposed off-base outside the parameter of this paragraph at a site without state permits or not in accordance with regulatory requirements, remove, transport, and relocate the debris to a state-approved site at Contractor expense. Pay any required fines, penalties, or fees related to the illegal disposal of construction debris. Metal will not be accepted at the Base Sanitary Landfill.

1.4.6.1.2 Surplus Soils Disposal for Camp Lejeune & MCAS New River

Transport all surplus soil to one of the designated locations on government property. No surplus material will leave government property without approval of installation Environmental Program Manager and the Contracting Officer. Deliver and properly manage any surplus soil that cannot be reused on its originating site to one of the following locations:

a. Area managed by G-3/5 for reuse on training areas for various maintenance activities:

3.5 acre storage, within TLZ Condor off Verona Loop Road, approximate coordinates 34d 38'07.3"N 77d 26' 41.7"W.

Coordinate with G-3/5 Project Development Specialist, MCIEAST-MCB CAMLEJ at (910) 451-5772 to determine capacity available at the storage location, prior to delivery.

This site operates Monday through Thursday between 0730 and 1500.

b. Area managed by PWD for use as daily cover:

Base landfill, located on Piney Green Road, approximate coordinates 34d 41' 26.9"N 77d 19' 27.4"W.

Contractor shall provide temporary silt fencing around designated stockpile areas as needed.

Coordinate with Landfill Manager at (910) 451-8666. Landfill use letters will be provided so that deliveries can be tracked.

This site operates Monday through Thursday between 0730 and 1500 and on Friday between 0700 and 1400.

Contact POCs listed above 7 to 10 days in advance to coordinate delivery of material at the storage locations.

Prior to transportation to one of the designated locations, screen all surplus soil to remove all objects greater than 3 inches and deleterious material. Deleterious material consists of organic debris such as roots, stumps, timber, and construction debris. Construction debris shall include, but is not limited to wood, plastic, glass, concrete, brick, and metal. Dispose of deleterious material and objects larger than 3 inches in accordance with Section 01 57 19 Temporary Environmental Controls.

Provide all plant, material, and labor for placement and management of the surplus material at the designated locations. Grade surplus material to a

SECTION 01 57 19.01 20 Page 23 flat condition and slope to provide positive drainage daily. Submit the following verification documents to the Contracting Officer for review and approval:

(1) Photographic documentation that surplus soil has been properly placed. Photograph will include time and date of image.

(2) Certification statement indicating volume, in cubic yards (CY), of material delivered and confirming material is free of contaminants.

NOTE: Soil contaminated with debris or chemicals cannot be disposed at the stockpile locations. If contaminated soils are suspected or confirmed through presence of UXO, odors, or visual staining, affected soils must be properly tested, manifested, and disposed of in accordance with RCRA regulations. Contact Base EMD, ER Program Manager, for more information.

1.4.6.2 MCAS Cherry Point

1.4.7 New York

1.4.8 Maine

1.4.9 District of Columbia

[1.5 NORTHWEST (Washington)

NOTE: The following paragraphs are tailored for NAVFAC NW use.

Forms referenced for attachment are available for download at: http://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs/forms-graphics-tables

Comply with the following state, regional, and local requirements which supplement Section 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS.

1.5.1 Contractor Employee Training Records

Train employees in accordance with WAC-173-303-330. Training must be completed and documented prior to the generation of waste.

1.5.1.1 Waste Originator Training for NBK Bangor

NBK Environmental Division Waste Originator…