TGI_38K6112301A01_c0v0.pdf

FOUO

FOUO: Public availability to be determined under 5 USC 552

TASK GROUP INSTRUCTION

AIM REV 20.11.4.0 (OCTOBER 2020)

TGI COMPONENT NAME: TYPE: PHASE: REPEAT: CHANGE:

NO.: FWD UPTAKE RPR AY A 0 0

SHIP/HULL NO.: SHIP/HULL NAME: SYSTEM: PROJ/WO NO: CASREP CAT:

DDG-115 USS RAFAEL PERALTA K61

CU PHASE TITLE:

*F/O – REPAIR FWD UPTAKE SPACE

PREPARING ACTIVITY:

PREPARED BY: CODE PHONE DATE

REIYA KIMURA 234. 070-7603-8983 28-NOV-2025

APPROVED BY: CODE PHONE DATE

HIDEO HARADA 234. 315-243-5176 28-NOV-2025

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

REASON FOR WORK/NEED FOR CHANGE:

CHANGE INSTRUCTIONS:

SPECIAL REQUIREMENTS:

HOT WORK IN MAGAZINE AND ADJACENT SPACES IAW S6740-AA-SAF-010 AND NAVSEA OP 4

WORK CERTIFICATION SIGNATURES

COMPLETION OF WORK REVIEW: BADGE NO.: SHOP/CODE: PHONE: DATE:

ACCEPTANCE OF COMPLETED WORK

PHYSICAL INSPECTION PHYSICAL INSPECTION COMPLETED: BADGE NO.: SHOP/CODE: PHONE: DATE:

REQUIRED:☐YES ☒NO

RECORDS REVIEW: BADGE NO.: SHOP/CODE: PHONE: DATE:

TGI NO.: FWD UPTAKE RPR AY A 0

FOUO

SHIP: DDG-115 CHG/VER: 0/0

LIST OF EFFECTIVE PAGES

SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO.

1-6 Sketch- 01 (1-4)

J1-2 Sketch- 02 (1-11)

M1-3 Engrg Inst (1-5)

1. SCOPE/PURPOSE

1.1 Title: FWD Uptake Space; repair

1.2 Location of Work:

1.2.1 Uptake Engine Room No. One (02-186-0-Q)

1.2.2 Decoy Launching System (DLS) Magazine (MAG) No. One (02-186-2-M)

1.2.3 DLS MAG No. 2 (02-194-1-M)

1.2.4 02 Level Weather, Frames between 204 and 206, Port

1.2.5 05 Level Weather, Frames between 189 and 216, Port and Starboard (Stbd)

1.3 Identification:

1.3.1 Quantity (20 SF), Insulation and Lagging, Exhaust Duct, 1A Gas Turbine Module (GTM), Frame 210, Located in 1.2.1 Insulation: MIL-PRF-2818 Lagging: 1577CW-WME Remarks: See Sketch Enclosure-02 for detail.

1.3.2 Quantity (20 SF), Insulation and Lagging, Exhaust Duct, 1B GTM, Frame 195, Located in 1.2.1 Insulation: MIL-PRF-2818 Lagging: 1577CW-WME Remarks: See Sketch Enclosure-02 for detail.

1.3.3 Quantity (32 SF), Insulation and Lagging, Exhaust Duct, No. One Ship Service Gas Turbine Generator (SSGTG), Frame 202, Located in 1.2.1 Insulation: MIL-PRF-2818 Lagging: 1577CW-WME Remarks: See Sketch Enclosure-02 for detail.

1.3.4 Quantity (13 EA in Total), Stud in 02-186-0-Q

Material: Steel

1.3.4.1 Quantity (2 EA), Stud on Web Frame 212, Stbd

Remarks: See Sheet 3 Detail 3-B of Sketch Enclosure-03 for location detail

1.3.4.2 Quantity (One EA), Stud on Transverse Bulkhead, Frame 212, Stbd Remarks: See Sheet 3 Detail 3-C of Sketch Enclosure-03 for location detail

FOUO

SHIP: DDG-115 CHG/VER: 0/0

1.3.4.3 Quantity (7 EA), Stud on Horizontal Stiffener on Longitudinal Bulkhead of Forward Stack, Frames between 206 and 212, Port Remarks: See Sheet 4 Detail 4-B and 4-C of Sketch Enclosure-03 for location detail

1.3.4.4 Quantity (One EA), Stud on Lateral Stiffener on Sloping Transverse Bulkhead, Frame 220, Port Remarks: See Sheet 4 Detail 4-D of Sketch Enclosure-03 for location detail

1.3.4.5 Quantity (3 EA), Stud on Horizontal Stiffener on Longitudinal Bulkhead of Forward Stack, Frames between 204 and 206, Port Remarks: See Sheet 5 of Sketch Enclosure-03 for location detail

1.3.5 Quantity (8 EA in Total), Padeye in 02-186-0-Q

Material: Steel

1.3.5.1 Quantity (4 EA), Padeye on Stack Top, Frames between 193 and 208, Port and Stbd Remarks: See Sheet 11 of Sketch Enclosure-03 for location detail

1.3.5.2 Quantity (2 EA), Padeye on Horizontal Framing, Frames between 187 and 189, Port and Stbd Remarks: See Sheet 8 Detail 8-A and 8-D of Sketch Enclosure-03 for location detail

1.3.5.3 Quantity (2 EA), Padeye on Flange Plate of Horizontal Framing, Frames between 188 and 189, Port and Stbd Remarks: See Sheet 8 Detail 8-B and 8-C of Sketch Enclosure-03 for location detail

1.3.6 Quantity (4 EA in Total), Cable Stud in 02-186-0-Q

Material: Steel

1.3.6.1 Quantity (2 EA), Cable Stud on Horizontal Stiffener on Sloping Transverse Bulkhead, Frame 220, Stbd Remarks: See Sheet 10 of Sketch Enclosure-03 for location detail

1.3.6.2 Quantity (One EA), Cable Stud on Vertical Stiffener on Sloping Transverse Bulkhead, Frame 186, Stbd Remarks: See Sheet 9 Detail 9-B of Sketch Enclosure-03 for location detail

1.3.6.3 Quantity (One EA), Cable Stud on Horizontal Stiffener on Sloping Transverse Bulkhead, Frame 186, Stbd Remarks: See Sheet 9 Detail 9-C of Sketch Enclosure-03 for location detail

1.3.7 Quantity (One EA), Cable Clamp with Stud on Horizontal Stiffener on Sloping Transverse Bulkhead in 02-186- 0-Q, Frame 186, Stbd Material: Steel Remarks: See Sheet 9 Detail 9-D of Sketch Enclosure-03 for location detail

1.3.8 Quantity (4 EA), Stuffing Tube on Transverse Bulkhead in 02-186-0-Q, Frames between 204 and 205, Port Material: Steel Remarks: See Sheet 5 Section 5-A of Engrg Inst Enclosure-01 for location detail

1.3.9 Quantity (One Lot), Bulkhead Plating, Transverse Bulkhead in 02-186-0-Q, Frames between 204 and 205, Port Base Material: HTS, MIL-S-22698 GR-DH36, 7.65 LBs Plate Remarks: See Sheet 5 Section 5-A of Engrg Inst Enclosure-01

1.3.10 Quantity (One Lot), Cable Trunk in 02-186-0-Q, Port

Base Material: HTS, MIL-S-22698 GR-DH36, 7.65 LBs Plate

1.3.10.1 Quantity (13 EA), Stud for Access Cover Plate

Remarks: See Sheet 6 of Sketch Enclosure-03 for location detail

1.3.10.2 Quantity (16 EA), Stud for Access Cover Plate

FOUO

SHIP: DDG-115 CHG/VER: 0/0

Parts No.: M24149/3-3 Material: CRES 316, MIL-24149/3D, Type V, Class One, Style B Size: 1/4-20UNC-2A, One Inch Length Remarks: See Detail 7C-4G of 2.7 and 2.8 for detail, and Sheet 6 of Sketch Enclosure-03 for location detail

1.3.11 Quantity (2 EA), Thermostat Switch

Mfr: Detroit Switch Inc Part Number: 222-10NNM-2221375

NSN: 5930-01-023-9214

Remarks: Item No. One, See SECT 3-A and SECT 5-A of Engrg Inst Enclosure-01 for details.

1.3.12 Quantity (15 EA), Cable Hanger for Coaxial Cable (Ckt: R-RA96(R4)) in 02-186-0-Q Material: Steel Remarks: See Engrg Inst Enclosure-01 for details.

1.4 Security Classification:

1.4.1 Spaces - 1.2.2 and 1.2.3

1.5 Initial Condition:

1.5.1 Potential Asbestos Hazard.

1.6 Contractor work start date:

1.7 Contractor work completion date:

2. REFERENCES:

REF.

NO.

DOCUMENT

/DRAWING

NUMBER

DOCUMENT/DRAWING TITLE REV CHG

NO.

COPY

REQ’D

(Y/N)

SOURCE

DOC

(Y/N)

PARA SEC PG CHP

1 NSI FY-26 NAVSEA Standard Items - 1 N 2 LI FY-26 Local Standard Items - ORG N

3 TM S9086-

VH-STM-

010/CH-635

Thermal, Fire, and Acoustic Insulation

3 N

4 DWG 259-

6218406

FAB & INSTL OF GTRB UPTAKE &

AIR INTAKE ENG RM NO.1 &

ABOVE

AF N

5 DWG 259-

6218421

FAB & INSTL of SS GTRB Uptake & Air Intakes AUX MCHRY RM

NO.1 & ABV

AH N

6 DWG 150-

7026725

UNIT STRUCTURAL ARR DWG

ASSY UNIT 4420

J Y SE

E N

OT

E

7 DWG 150-

7026723

UNIT STRL ARR ASSY UNIT 4320 J Y 7C

-18

8 DWG 100-

6218863

STANDARD STRUCTURAL &

WELDING DETAILS

AJ Y 74

9 DWG 301-

7027056

INSTL ELEC EQUIP DZ 4420 FWD

STACK

H Y 23, 10 DWG 331-

7028051

One Line Diagram Lighting System G Y 59 E

11 MIL MIL-

STD-2003

Electric Plant Installation Standard Methods for Surface Ships and Submarines

B N

Kouichi.Yoshida.ja Typewritten Text 7/27/2026

Kouichi.Yoshida.ja Typewritten Text 9/4/2026

FOUO

SHIP: DDG-115 CHG/VER: 0/0

3. APPENDICES:

3.1. Appendix “J” TGI Job Summary Information Sheet

3.2. Appendix "M" TGI Material List

3.3. Appendix “D” Deficiency Form

4. GENERAL REQUIREMENTS:

4.1. Not Applicable.

5. PROCEDURE:

5.1 Remove each existing insulation and lagging listed in 1.3.1 through 1.3.3 from each exhaust duct, using 2.3 for guidance.

5.2 Accomplish the requirements of 009-011 of 2.1 for installation of each new insulation and lagging listed in 1.3.1 through 1.3.3 to each exhaust duct, using 2.4 and 2.5 for guidance.

5.3 Remove unused each existing stud, padeye, cable stud, cable clamp, and stuffing tube listed in 1.3.4 through

1.3.8 in accordance with Enclosure-01, using 2.6 for guidance.

5.3.1 Accomplish build up weld of remaining holes on each existing bulkhead plating listed in 1.3.9 where removal of unused each stuffing tube listed in 1.3.8.

5.3.1.1 Accomplish the requirements of 009-012 of 2.1, including Table 2, Column(s) A, Lines One through 7.

5.3.1.2 Accomplish the requirements of 009-025 of 2.1 for a local air hose test of each new weld of bulkhead plating listed in 1.3.11. Allowable leakage: None.

5.4 Remove 2 each of access cover plate of each existing cable trunk listed in 1.3.10, using 2.7 for guidance.

5.4.1 Remove remaining portion of each existing stud listed in 1.3.10.1.

5.5 Accomplish build up weld of remaining bolt holes on each existing cable trunk listed in 1.3.10, using 2.7 for guidance.

5.5.1 Drill 1/2 inch diameter hole on each remaining hole.

5.5.2 Shape remaining hole to minimum 20 degrees countersink.

5.5.3 Accomplish the requirements of 009-012 of 2.1, including Table 2, Column(s) A, Lines One through 7.

5.5.4 Accomplish the requirements of 009-025 of 2.1 for a local air hose test of each new weld of cable trunk listed in

1.3.10. Allowable leakage: None.

5.6 Install each new stud listed in 1.3.10.2 in accordance with 2.7 and 2.8.

5.6.1 Accomplish the requirements of 009-012 of 2.1, including Table 2, Column(s) A, Lines One through 7.

5.7 Reinstall 2 each of access cover plate of each cable trunk listed in 1.3.10, using new gaskets, CRES self-locking nuts conforming to NASM17830, and new CRES washers conforming to FF-W-92, Type A, Grade One, Class B, using 2.7 for guidance.

Kouichi.Yoshida.ja Cross-Out

Kouichi.Yoshida.ja Typewritten Text

1/26/2026 C1209.2 K. YOSHIDA

FOUO

SHIP: DDG-115 CHG/VER: 0/0

5.7.1 Fabricate new gaskets conforming to MIL-PRF-2765.

5.8 Remove existing and install new each equipment listed in 1.3.11 in accordance with Enclosure-01, using 2.9 and Sheet 59E of 2.10 for guidance.

5.9 Remove existing, fabricate, and install new each cable hanger listed in 1.3.12 in accordance with 2.11 and Enclosure-01.

5.10 Accomplish the requirements of 009-032 of 2.1 for each new and disturbed surface.

5.11 Notes:

5.11.1 Planner: Code 234 R. Kimura, 070-7603-8983

Planner: Code 231B C. Saito, 243-5840 Planner: Code 232 T. Ogata, 243-1176 Planner: Code 233 Y. Shinohara, 080-9350-1451 Planner: Code 233 R. Nakamura, 080-9350-1445 Engineer: Code 250 K. Ishiwata, 243-0092 Engineer: Code 270 N. Kozaki, 243-1880

5.11.2 Work Integration Manager (WIM): Code 333 T. Yaginuma, 080-5419-0598

5.11.3 JCNs EM01-L034 and ES01-NA61 are related to this TGI.

5.11.4 WPC will copy the following pages in reference.

REF. 2.6: Pages 3N-6, 3-12, 3A-12, 3B-18, 3C-18, and 3D-18

5.11.5 Thermostat switches listed in 1.3.11 will be adjusted by S/F.

5.12 Government Furnished Material (GFM):

5.12.1 SRF-JRMC will provide GFM listed in the Material List.

5.13 SRF-JRMC will provide the following service work: (TGI No. 38K6112301S02)

5.13.1 [C740] Crane and crane rigging service.

5.13.2 [X99E] Utilities service.

5.13.3 [X99M] Utilities service, including low pressure air supply, water supply, and steam supply.

5.13.4 [C106.1] Safety inspection for SRF-JRMC employees.

5.13.5 [C106.2] Gas free inspection for SRF-JRMC employees.

5.13.6 [C133] QA Inspection for (G) symbol(s).

FOUO

M-1

SHIP: DDG-115 CHG/VER: 0/0

APPENDIX “M”

TGI MATERIAL LIST

SYSTEM: PLANT NO.: COMPONENT NAME: TYPE: PHASE: REPEAT: CU PH

VERSION:

CASREP

CAT:

FWD UPTAKE RPR AY A 0 0

CU PHASE TITLE:

*F/O – REPAIR FWD UPTAKE SPACE

MATERIAL REFERENCES

REF

NO.

DOCUMENT/DRAWING

NUMBER

DOCUMENT/DRAWING TITLE REV

JOB ORDER: KEY OP:

38K6112301 A01

MATERIAL LIST

ITEM

NO.

PC

NO.

REF

NO.

M

C DESCRIPTION

STOCK

NUMBER

GENERIC

MATL

TYPE LVL QA

HAZ

MAT

DOC

NO.

QTY

REQD/

UNIT

QTY

USED/

UNIT

100 M INSULATI, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9Q 5640 013713263 NA 4 N 53175486 3/SH

101 M INSULATI, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9Q 5640 013713262 NA 4 N 53175457 4/SH

102 M TAPE,TEX, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 8315 002671632 NA 4 N 53175126 1/RO

103 M CAP,SNAP, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 5325 007377648 NA 4 N 53175136

100/EA

104 M ADHESIVE, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 8040 002738708 NA 4 Y 53175147 1/GL

NOTES:

FOUO

M-2

SHIP: DDG-115 CHG/VER: 0/0

MATERIAL LIST

ITEM

NO.

PC

NO.

REF

NO.

M

C DESCRIPTION

STOCK

NUMBER

GENERIC

MATL

TYPE LVL QA

HAZ

MAT

DOC

NO.

QTY

REQD/

UNIT

QTY

USED/

UNIT

105 M STUD WELDING, STUD

WELDING WITH ARC SHIELD

(FERRULE), SPEC:MIL-S-

24149/3 TYPE V STYLE B

(SOLID FLUX WELD-END)

CLASS 1, SIZE:1/4"-20UNC-2A

X 1"LG, MATL:CRES 316

ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

LL9310282 NA 4 N 16/EA

106 M NUT,SELF, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 5310 015126463 NA 4 N 53175491 40/EA

107 M WASHER,F, ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 5310 014476391 NA 4 N 53175386 40/EA

108 M RUBBER SHEET,SOLID,

ORDER FOR KTR

ORIG: C231B, C. SAITO, 243-

9B 9320 010199073 NA 4 N 53285143 2/SY

200 M SWITCH,THERMOSTATIC,

ORDERED FOR KTR

ORIG: C-232, T. OGATA 243-

3B 5930 010239214 NA 4 N 53175495 2/EA

201 M SCREW,CAP,HEXAGON H,

ORDERED FOR KTR

ORIG: C-232, T. OGATA 243-

9B 5305 015198464 NA 4 N 53175500 6/EA

300 M ANGLE DOWNCOMER, ANGLE

DOWNCOMER, STEEL, 120-

3/8"LG, UNIVERSAL TYPE,

WELD STUD MOUNTING, PART

NUMBER EQUALS ONE EACH.

ORIG: C233.2 R. NAKAMURA,

080-9350-1445

ORDERED FOR KTR

P/N: 3ADS-120U

9Q LL4660730 NA 4 N 1/EA

301 M CROSSTIER, NAVY STAN,

CROSSTIER, NAVY STANDARD

7"LONG.CABLE HANGER,

STEEL, USE FOR WIREWAY,

UNIVERSAL TYPE

ORIG: C233.2 R. NAKAMURA,

080-9350-1445

ORDERED FOR KTR

P/N: 3CTS-07

LL9000947 NA 4 N 15/EA

302 M CHANNEL, DOWNCOMER,

CHANNEL, DOWNCOMER,

LENGTH: 10 FT, MATL: STEEL,

ORIG: C233.2 R. NAKAMURA,

080-9350-1445

ORDERED FOR KTR

P/N: 3CDS-120

9G 5975 LL4588937 NA 4 N 53287468 1/EA

FOUO

M-3

SHIP: DDG-115 CHG/VER: 0/0

MATERIAL LIST

ITEM

NO.

PC

NO.

REF

NO.

M

C DESCRIPTION

STOCK

NUMBER

GENERIC

MATL

TYPE LVL QA

HAZ

MAT

DOC

NO.

QTY

REQD/

UNIT

QTY

USED/

UNIT

400 M INSULATI, INSULATION

BLANKET, THERMAL, MINERAL

WOOL,

SPEC: MIL-PRF-2818,

SIZE: 24" X 48" X 2" THK,

DENSITY: 8 LBS/CU FT,

BIW CATALOG NO. 47111-030,

ROCKWOOL P/N: SEAROX SL

620(128), REMARKS: OMIT METALLIC

SUPPORT MEMBERS FROM

BOTH SIDES,

ORG: C234 R.KIMURA, 070-

7603-8983

ORDERED FOR KTR

9B 5640 LL9606678 NA 4 N 53297746 10/SH

401 M INSULATION JKT TAPE,

INSULATION JKT TAPE,

3M VENTURECLAD

ENHANCED METAL

JACKETING, SILVER SMOOTH,

OVERALL WIDTH: 46”,

OVERALL LENGTH: 25 YARD,

ADHESIVE TYPE: ACRYLIC,

3M ID: 7100311664

ORG: C234 R.KIMURA, 070-

7603-8983

ORDERED FOR KTR

9B 5640 LL9609097 NA 4 N 1/RO

402 M TAPE INS, 3M 1577CW-3M (TM)

VENTURECLAD (TM)

INSULATION JACKETING TAPE

1577CW NATURAL ALUMINUM,

OVERALL WIDTH: 4”,

OVERALL LENGTH: 50 YARD,

ADHESIVE TYPE: ACRYLIC,

UI: CASE (4 ROLL),

C234 R.KIMURA, 070-7603-8983

ORDERED FOR KTR

9B 5640 LL9607166 NA 4 N 53297747 1/CS

FOUO: Public availability to be determined under 5 USC 552 SHEET_____OF_____

☐ NUCLEAR APPENDIX "D"

DEFICIENCY FORM

☐ NON-NUCLEAR

1. SHIP/HULL NO.: 2a. DL or DR No.

(Circle One)

2b. REVISION: 3a. COMPONENT NAME: 3b. TYPE: 3c. PHASE: 3d. REPEAT:

DDG-115 FWD UPTAKE RPR AY A 0

4a. ICN: 4b. KEY OP: 5. LOC SPACE/LVL: FRAME: P/S/C: 6. CAUSED BY:

38K6112301 A01

7. DESCRIPTION:

8. ORIGINATOR: NAME: BADGE: SHOP/CODE: DATE: PHONE NO.:

9. CORRECTIVE ACTION:

10. EVALUATOR: NAME: BADGE: SHOP/CODE: DATE: PHONE NO.:

FOR NON-NUCLEAR USE ONLY

11. RFD/RFW REQ’D ☐ LAR REQ'D ☐

ILS MOD REQ’D ☐

SRD/PLAN REV REQ'D ☐

DWG NO.: _____________________ S/A NO.: ___________________

12. ISOLATION SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.:

SATISFACTORY:

13. SUBSAFE OQE RECORD? SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

YES ☐ NO ☐

14. CORRECTIVE ACTION SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

COMPLETE:

15. INSPECTION REQ’D? INSPECTION COMPLETE/SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

_________:YES ☐ NO ☐

16. RECORDS REVIEW SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

COMPLETE (DR ONLY)

DL’s ISSUED

(DR ONLY)

FOUO: Public availability to be determined under 5 USC 552 SHEET_____OF_____

☐ NUCLEAR Deficiency Form Continuation Sheet ☐ NON-NUCLEAR

1. SHIP/HULL NO.: 2a. DL or DR No.

(Circle One) 2b. REVISION: 3a. COMPONENT NAME: 3b. TYPE: 3c. PHASE: 3d. REPEAT:

DDG-115 FWD UPTAKE RPR AY A 0

38K6112301A01 ENCLOSURE-01 Sheet 1 of 5

AutoCAD SHX Text REFERENCES: ASTERISKED (*) REFERENCES ARE NOT REQUIRED FOR PRODUCTION WORK ASTERISKED (*) REFERENCES ARE NOT REQUIRED FOR PRODUCTION WORK * (a). DDG51CL-331-7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM (a). DDG51CL-331-7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM 51CL-331-7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM -331-7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM 31-7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM -7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM 7028051 "G": ONE LINE DIAGRAM LIGHTING SYSTEM "G": ONE LINE DIAGRAM LIGHTING SYSTEM G": ONE LINE DIAGRAM LIGHTING SYSTEM ": ONE LINE DIAGRAM LIGHTING SYSTEM ONE LINE DIAGRAM LIGHTING SYSTEM (b). WCL FOR DDG115 "1": WIRE CONNECTION LIST FOR DDG115 WCL FOR DDG115 "1": WIRE CONNECTION LIST FOR DDG115 "1": WIRE CONNECTION LIST FOR DDG115 1": WIRE CONNECTION LIST FOR DDG115 ": WIRE CONNECTION LIST FOR DDG115 WIRE CONNECTION LIST FOR DDG115 *(c). DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM (c). DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM c). DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM ). DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM DDG51CL-441-6567479 "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM "L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM L": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM ": RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM RADIO COMMUNICATIONS SYSTEM (INTER-SPACE) CABLE BLOCK DIAGRAM *(d). DDG51CL-150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 (d). DDG51CL-150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 DDG51CL-150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 51CL-150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 -150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 150-7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 -7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 7026725 "J": UNIT STRL ARR DWG ASSY UNIT 4420 *(e). NAVSEA S9AA0-AB- GENERAL SPECIFICATIONS FOR OVERHAUL OF SURFACE SHIPS NAVSEA S9AA0-AB- GENERAL SPECIFICATIONS FOR OVERHAUL OF SURFACE SHIPS GENERAL SPECIFICATIONS FOR OVERHAUL OF SURFACE SHIPS GOS-010/GS0 REV 11: NOTES: 1. ELECTRICAL EQUIPMENT AND CABLING SHALL BE INSTALLED IN ACCORDANCE WITH MIL-STD-2003B(SH). ELECTRICAL EQUIPMENT AND CABLING SHALL BE INSTALLED IN ACCORDANCE WITH MIL-STD-2003B(SH). 2. EQUIPMENT SHALL BE BONDED/GROUNDED IN ACCORDANCE WITH MIL-STD-1310H(NAVY). EQUIPMENT SHALL BE BONDED/GROUNDED IN ACCORDANCE WITH MIL-STD-1310H(NAVY). 3. AFTER REMOVAL OF THE UNUSED STUFFING TUBE, BLANK WITH BUILD UP WELD FOR THE REMAINING HOLE. AFTER REMOVAL OF THE UNUSED STUFFING TUBE, BLANK WITH BUILD UP WELD FOR THE REMAINING HOLE. ALL WELDING AND INSPECTION FOR STEEL MATERIALS SHALL BE CONDUCTED IN ACCORDANCE WITH TABLE 2 OF NAVSEA STD ITEM (NSI) NO. 009-012. 012. 12. . 4. EXISTING CAPILLARY TUBE AND CABLE FOR THERMOSTAT SHALL BE REUSED. THE TEMPERATURE SETTING OF THE EXISTING CAPILLARY TUBE AND CABLE FOR THERMOSTAT SHALL BE REUSED. THE TEMPERATURE SETTING OF THE USED. THE TEMPERATURE SETTING OF THE . THE TEMPERATURE SETTING OF THE THE TEMPERATURE SETTING OF THE REPLACED THERMOSTAT SHALL BE ADJUSTED BY S/F. 5. ITEM 3 & 4 SHALL NOT REQUIRE CALIBRATION. ITEM 3 & 4 SHALL NOT REQUIRE CALIBRATION. TEST NOTE: T1. AFTER COMPLETION OF WORK, AIR HOSE TEST SHALL BE CONDUCTED APPLYING THE METHOD ON PARAGRAPH 192f OF REF (e) OR NAVSEA STD ITEM 009-025.

AutoCAD SHX Text_1

%%U ENGRG INST

AutoCAD SHX Text_2

NO

AutoCAD SHX Text_3

ITEM

AutoCAD SHX Text_4

SPEC/MATERIAL

AutoCAD SHX Text_5

REMARKS

AutoCAD SHX Text_6

QTY

AutoCAD SHX Text_7

DESCRIPTION

AutoCAD SHX Text_8

NO

AutoCAD SHX Text_9

ITEM

AutoCAD SHX Text_10

AutoCAD SHX Text_11

MATERIAL LIST

AutoCAD SHX Text_12

NSN

AutoCAD SHX Text_13

AutoCAD SHX Text_14

AutoCAD SHX Text_15

2 EA

AutoCAD SHX Text_16

AutoCAD SHX Text_17 5930-01-023-9214

AutoCAD SHX Text_18

1 EA

AutoCAD SHX Text_19

AutoCAD SHX Text_20

P/N: 3ADS-120U CAGE: 63044 OR EQL SEE NOTE 5

AutoCAD SHX Text_21

1 EA

AutoCAD SHX Text_22

AutoCAD SHX Text_23

SWITCH, THERMOSTAT

AutoCAD SHX Text_24

CROSSTIER, STEEL, LG 7"

AutoCAD SHX Text_25

15 EA

AutoCAD SHX Text_26

STEEL

AutoCAD SHX Text_27

P/N: 3CTS-07 CAGE: 63044 OR EQL

AutoCAD SHX Text_28

ANGLE DOWNCOMER, STEEL, LG 120"

AutoCAD SHX Text_29

CHANNEL DOWNCOMER, STEEL, LG 10'

AutoCAD SHX Text_30

P/N: 3CDS-120 CAGE: 63044 OR EQL SEE NOTE 5

AutoCAD SHX Text_31

AutoCAD SHX Text_32

38K6112301A01 ENCLOSURE-01 Sheet 2 of 5

AutoCAD SHX Text_33

AutoCAD SHX Text_34

AutoCAD SHX Text_35

AutoCAD SHX Text_36

AutoCAD SHX Text_37

AutoCAD SHX Text_38

AutoCAD SHX Text_39

AutoCAD SHX Text_40 C

AutoCAD SHX Text_41

SHIP

AutoCAD SHX Text_42

FWD

AutoCAD SHX Text_43 B

AutoCAD SHX Text_44

AutoCAD SHX Text_45

AutoCAD SHX Text_46 A

AutoCAD SHX Text_47

AutoCAD SHX Text_48 A

AutoCAD SHX Text_49

AutoCAD SHX Text_50 A

AutoCAD SHX Text_51

UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_52 02-186-0-Q

AutoCAD SHX Text_53

DLS MAGAZINE NO. 1

AutoCAD SHX Text_54 02-186-2-M

AutoCAD SHX Text_55

DLS MAGAZINE NO. 2

AutoCAD SHX Text_56 02-194-1-M

AutoCAD SHX Text_57

%%U ENGRG INST

AutoCAD SHX Text_58

PLAN 2-A

AutoCAD SHX Text_59

- SCALE : NONE -

AutoCAD SHX Text_60

02 LVL UPTAKE ENGINE RM NO. 1

38K6112301A01 ENCLOSURE-01 Sheet 3 of 5

AutoCAD SHX Text_61

%%U ENGRG INST

AutoCAD SHX Text_62

CKT R-RA96(R4)

AutoCAD SHX Text_63

AutoCAD SHX Text_64

(REPLT)

AutoCAD SHX Text_65

CABLE HANGER (9 EA)

AutoCAD SHX Text_66

SEE DET 5-B FOR REPLT

AutoCAD SHX Text_67

EL 3-B

AutoCAD SHX Text_68

LKG OUTBOARD

AutoCAD SHX Text_69

- SCALE : NONE -

AutoCAD SHX Text_70

REPLT

AutoCAD SHX Text_71

02 LVL UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_72

MTG PAD FOR DETROIT SW

AutoCAD SHX Text_73

(EXST)

AutoCAD SHX Text_74

SECT 3-A

AutoCAD SHX Text_75

LKG FWD

AutoCAD SHX Text_76

- SCALE : NONE -

AutoCAD SHX Text_77

REPLT

AutoCAD SHX Text_78

02 LVL UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_79

AutoCAD SHX Text_80

AutoCAD SHX Text_81

THERMOSTAT, CKT LC24-1L-D12(3)

AutoCAD SHX Text_82

AutoCAD SHX Text_83

(REPLT)

AutoCAD SHX Text_84

CAPILLARY TUBE

AutoCAD SHX Text_85

(EXST)

AutoCAD SHX Text_86

TUBING DRUM

AutoCAD SHX Text_87

(EXST)

AutoCAD SHX Text_88

SEE NOTE 4

38K6112301A01 ENCLOSURE-01 Sheet 4 of 5

AutoCAD SHX Text_89

04 LVL DK

AutoCAD SHX Text_90

03 LVL DK

AutoCAD SHX Text_91

CKT R-RA96(R4)

AutoCAD SHX Text_92

(REPLT)

AutoCAD SHX Text_93

CABLE HANGER (5 EA)

AutoCAD SHX Text_94

SEE DET 5-B FOR REPLT

AutoCAD SHX Text_95

CKT R-RA96(R4)

AutoCAD SHX Text_96

(REPLT)

AutoCAD SHX Text_97

CABLE HANGER

AutoCAD SHX Text_98

SEE DET 5-B FOR REPLT

AutoCAD SHX Text_99

AutoCAD SHX Text_100

AutoCAD SHX Text_101

AutoCAD SHX Text_102

AutoCAD SHX Text_103

AutoCAD SHX Text_104

AutoCAD SHX Text_105

SECT 4-A 4-A -A

AutoCAD SHX Text_106

LKG AFT

AutoCAD SHX Text_107

- SCALE : NONE -

AutoCAD SHX Text_108

REPLT

AutoCAD SHX Text_109 03 LVL UPTAKE ENGINE RM NO. 13 LVL UPTAKE ENGINE RM NO. 1 LVL UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_110

CONTINUED TO SECT 4-B

AutoCAD SHX Text_111

FOR CABLE HANGER

AutoCAD SHX Text_112

SECT 4-B 4-B -B B

AutoCAD SHX Text_113

LKG AFT

AutoCAD SHX Text_114

- SCALE : NONE -

AutoCAD SHX Text_115

REPLT

AutoCAD SHX Text_116 04 LVL UPTAKE ENGINE RM NO. 14 LVL UPTAKE ENGINE RM NO. 1 LVL UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_117

%%U ENGRG INST

38K6112301A01 ENCLOSURE-01 Sheet 5 of 5

AutoCAD SHX Text_118

AutoCAD SHX Text_119

(REPLT)

AutoCAD SHX Text_120

CHANNEL DOWNCOMER (TYP)

AutoCAD SHX Text_121

DET 5-B (TYP)

AutoCAD SHX Text_122

- SCALE : NONE -

AutoCAD SHX Text_123

REPLT

AutoCAD SHX Text_124

CABLE HANGAR ASSY

AutoCAD SHX Text_125

(EXST) REUSE

AutoCAD SHX Text_126

STUD FOR CABLE HANGER

AutoCAD SHX Text_127

(EXST-REUSE)

AutoCAD SHX Text_128

CABLE SADDLE

AutoCAD SHX Text_129

(RMV)

AutoCAD SHX Text_130

UNUSED STFG TUBE (4 EA), STEEL

AutoCAD SHX Text_131

SEE NOTE 3

AutoCAD SHX Text_132

THERMOSTAT, CKT LC24-1L-D12(4)

AutoCAD SHX Text_133

AutoCAD SHX Text_134

(REPLT)

AutoCAD SHX Text_135

MTG PAD FOR DETROIT SW

AutoCAD SHX Text_136

(EXST)

AutoCAD SHX Text_137

SECT 5-A

AutoCAD SHX Text_138

LKG FWD

AutoCAD SHX Text_139

- SCALE : NONE -

AutoCAD SHX Text_140

REPLT

AutoCAD SHX Text_141

02 LVL UPTAKE ENGINE RM NO. 1

AutoCAD SHX Text_142

WTRTT TRANSV BHD

AutoCAD SHX Text_143

7.65# HS

AutoCAD SHX Text_144

AutoCAD SHX Text_145

%%U ENGRG INST

AutoCAD SHX Text_146

CAPILLARY TUBE

AutoCAD SHX Text_147

(EXST)

AutoCAD SHX Text_148

TUBING DRUM

AutoCAD SHX Text_149

(EXST)

AutoCAD SHX Text_150

SEE NOTE 4

AutoCAD SHX Text_151

(REPLT)

AutoCAD SHX Text_152

ANGLE DOWNCOMER (TYP)

AutoCAD SHX Text_153

(REPLT)

AutoCAD SHX Text_154

CROSSTIER, STEEL (TYP)

AutoCAD SHX Text_155

DDG-115 RAFAEL PERALTA

Cited from TGI No. 3815C12310A01-DL005 Report-1

UPTAKE ENGINE

ROOM NO. 1

02 LEVEL DECK

(02-186-0-Q)

LKG DECK

FWD

AFT

FR186

STBD

L5P

L4P

L3P

L2P

L1P

CL

L1S

L2S

L3S

L4S

L5S

FR194

FR206

FR215

394041

444546

60 59

69 70 71 72

78 79

81 82

88 89

38K6112301A01

SKETCH

ENCLOSURE-02 Sheet 1 of 4

Reiya.Kimura.ja Oval

Reiya.Kimura.ja_1 Oval

Reiya.Kimura.ja_2 Oval

Reiya.Kimura.ja_3 Text Box

1B GTM

Reiya.Kimura.ja_4 Text Box

1A GTM

Reiya.Kimura.ja_5 Text Box

#1 SSGTG

Reiya.Kimura.ja_6 Underline

93-1 93-2

93-4

1.3.1 Quantity (20 SF), Insulation and Lagging, Exhaust Duct, 1A Gas Turbine Module (GTM)

38K6112301A01

SKETCH

ENCLOSURE-02 Sheet 2 of 4

Reiya.Kimura.ja_7

23-1 23-2

23-4 23-5

1.3.2 Quantity (20 SF), Insulation and Lagging, Exhaust Duct, 1B GTM

38K6112301A01

SKETCH

ENCLOSURE-0238K6112301A01

SKETCH

ENCLOSURE-02 Sheet 3 of 4

Reiya.Kimura.ja_8

24-2

24-3

1.3.3 Quantity (32 SF), Insulation and Lagging, Exhaust Duct, No. One Ship Service Gas Turbine Generator (SSGTG)

38K6112301A01

SKETCH

ENCLOSURE-02 Sheet 4 of 4

Reiya.Kimura.ja_9

SHEET 1 OF 11

OUTBD PROFILE

FWD STACK, STBD

LKG INBD

SKETCH

ENCLOSURE-03

PLAN 2-A

38K6112301A01

PLAN 7-A

PLAN 11-A

FWD STACK

68’-0” ABL

03 LVL

76’-5” ABL

LOCATION MAP OF VARIOUS EQUIPMENT IN 02-186-0-Q, 02 LEVEL

SHEET 2 OF 1138K6112301A01

FWD

PLAN 2-A

02-186-0-Q, 02 LVL

SKETCH

ENCLOSURE-03

SECT 3-A

EL 4-A

SECT 4-D

SECT 6-A

EL 5-A

LOCATION OF UNUSED STUD LISTED IN 1.3.4.1 & 1.3.4.2

SECT 3-A

TRNSV BHD FR 212, STBD

LKG AFT

DET 3-B

DET 3-C

SHEET 3 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

DET 3-C

UNUSED STUD LISTED IN 1.3.4.2

DET 3-B

UNUSED STUD LISTED IN 1.3.4.1

UNUSED STUD

UNUSED STUD

LOCATION OF UNUSED STUD LISTED IN 1.3.4.3 & 1.3.4.4

EL 4-A

LONG BHD, STACK SIDE

FR 206-212, PORT

LKG OUTBD

SHEET 4 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

DET 4-B

UNUSED STUD LISTED IN 1.3.4.3

UNUSED STUD

UNUSED STUD

FR 206FR 220

FWD

DET 4-C

DET 4-E

DET 4-B

UNUSED STUD

DET 4-C

UNUSED STUD LISTED IN 1.3.4.3

SECT 4-D

SLOPING TRANSV BHD

FR 220, PORT

LKG AFT

02 LVL

DET 4-E

UNUSED STUD LISTED IN 1.3.4.4

LOCATION OF UNUSED STUD LISTED IN 1.3.4.5

DET 5-C

SHEET 5 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

DET 5-C

UNUSED STUD LISTED IN 1.3.4.5

DET 5-B

UNUSED STUD LISTED IN 1.3.4.5

UNUSED STUD

UNUSED STUD

EL 5-A

LONG BHD, STACK SIDE

FR 200-206, PORT

LKG OUTBD

FR 200FR 206

FWD

DET 5-B

CABLE TRUNK LISTED IN 1.3.11

SHEET 6 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

SECT 6-A

CABLE TRK ON SLOPING TRANSV BHD

FR 186, LKG FWD

LEGEND

- REMAINING PORTION OF STUD

- REMAINING BOLT HOLE

LOCATION MAP OF VARIOUS EQUIPMENT IN 02-186-0-Q, BETW 03 & 04 LEVEL

SHEET 7 OF 1138K6112301A01

FWD

PLAN 7-A

HORIZ FRAMING 68’-0” ABL, 02-186-0-Q

BETW 03 & 04 LVL

SKETCH

ENCLOSURE-03

SECT 10-A

DET 8-B

DET 8-C

DET 8-A

DET 8-D

SECT 9-A

LOCATION OF UNUSED PADEYE LISTED IN 1.3.5.2 & 1.3.5.3

SHEET 8 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

DET 8-A

UNUSED PADEYE LISTED IN 1.3.5.2

LOWER SIDE OF HORIZ FRAMING, PORT

LKG FWD

UNUSED PADEYE

DET 8-C

UNUSED PADEYE LISTED IN 1.3.5.3

FLG PL OF HORIZ FRAMING, STBD

LKG FWD

UNUSED PADEYE

DET 8-B

UNUSED PADEYE LISTED IN 1.3.5.3

FLG PL OF HORIZ FRAMING, PORT

LKG FWD

UNUSED PADEYE

UNUSED PADEYE

DET 8-D

UNUSED PADEYE LISTED IN 1.3.5.2

LOWER SIDE OF HORIZ FRAMING, STBD

LKG FWD

LOCATION OF UNUSED CABLE STUD LISTED IN 1.3.6.2 & 1.3.6.3, AND CABLE CLAMP LISTED IN 1.3.7

SHEET 9 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

DET 9-B

UNUSED CABLE STUD LISTED IN 1.3.6.2

SECT 9-A

SLOPING TRANSV BHD

FR 186, STBD

LKG FWD

DET 9-B

68’-0” ABL

76’-5” ABL

DET 9-C

DET 9-C

UNUSED CABLE STUD LISTED IN 1.3.6.3

DET 9-D

UNUSED CABLE CLAMP LISTED IN 1.3.7

DET 9-D

LOCATION OF UNUSED CABLE STUD LISTED IN 1.3.6.1

SHEET 10 OF 1138K6112301A01

SKETCH

ENCLOSURE-03

SECT 10-A

SLOPING TRANSV BHD

FR 220, PORT

LKG AFT

DET 10-B

68’-0” ABL

76’-5” ABL

DET 10-B

UNUSED CABLE STUD LISTED IN 1.3.6.1

UNUSED CABLE STUD

FWD

LOCATION OF UNUSED PADEYE LISTED IN 1.3.5.1

SHEET 11 OF 1138K6112301A01

PLAN 11-A

STACK TOP 81’-3” ABL, 02-186-0-Q

SKETCH

ENCLOSURE-03

DET 11-D

DET 11-A

DET 11-B

DET 11-A

UNUSED PADEYE

FR 197-200, PORT

DET 11-C

UNUSED PADEYE

FR 203-205, STBD

DET 11-B

UNUSED PADEYE

FR 197-200, STBD

FR 193

DET 11-C

FR 200FR 208 FR 203

DET 11-D

UNUSED PADEYE

FR 205-208, PORT