BUILDING220-PLOTFILE.pdf

BLDG NO. BUILDING NAME LOCATION

STEAM PIPE SIZE

(IN.)

BASIS OF DESIGN

STEAM METER

MODEL

PUMPED

CONDENSATE

RETURN SIZE (IN.)

BASIS OF DESIGN

CONDENSATE METER

MODEL

CONNECT

LOAD (PPH)

OFF PEAK

LOAD (PPH)

NOTES

SERVICE ENTRANCE 6" EXISTING

SERVICE ENTRANCE 4" ABB Swirl

1. REFER TO DETAIL SHEET AND SPECIFICATION FOR INSTALLATION REQUIREMENTS.

2. DUE TO ALL HIGH PRESSURE STEAM METER INSTALLATION REQUIREMENTS, CONTRACTOR SHALL SCHEDULE WITH COTR BUILDING SHUTDOWN/OUTAGE UPON AWARD OF CONSTRUCTION CONTRACT.

3.

4.

5.

6. MULTIPLE FLOW METER INSTALLATION. SEE PLANS FOR ADDITIONAL INFORMATION.

7. CONTRACTOR SHALL CONFIRM WITH GOVERNMENT EXISTING METERING WILL PROVIDE DATA COLLECTION POINTS REQUIRED IN THIS SCOPE OF WORK.

HOT TAPPING WILL BE REQUIRED FOR ALL PUMPED CONDENSATE RETURN LINES FOR INSTALLATION OF DRY WELL TYPE INSERTION TEMPERATURE SENSORS FOR TOTAL ENERGY DATA COLLECTION.

REFER TO PLANS FOR LOCATIONS.

ABB SWIRL ARE FLANGED FITTING METERS.

STEAM AND CONDENSATE METER TABLE

TABLE IS FOR INFORMATION PURPOSES ONLY. FLOW METER SIZE AND INSTALLATION SHALL BE ACCORDING TO MANUFACTURERS RECOMMENDATION.

METROLOGY BUILDING 220 3" GE DF868 10,430 6,260 ALL

GENERAL NOTES:

BLDG NO. BUILDING NAME LOCATION PIPE SIZE (IN.)

BASIS OF DESIGN

METER MODEL

FLOW

DIRECTION

PEAK LOAD

(GPM)

OFF PEAK LOAD

(GPM) NOTES

14" EXISTING SUPPLY

14" GE DF868 RETURN

3" GE DF868 SUPPLY

3" GE DF868 RETURN

1. REFER TO DETAIL SHEET AND SPECIFICATION FOR INSTALLATION REQUIREMENTS.

2.

3.

4.

5. MULTIPLE FLOW METER INSTALLATION. SEE PLANS FOR ADDITIONAL INFORMATION.

6. CONTRACTOR SHALL CONFIRM WITH GOVERNMENT EXISTING METERING WILL PROVIDE DATA COLLECTION POINTS REQUIRED IN THIS SCOPE OF WORK.

CHILLED WATER METER TABLE

TABLE IS FOR INFORMATION PURPOSES ONLY. FLOW METER SIZE AND INSTALLATION SHALL BE ACCORDING TO MANUFACTURERS RECOMMENDATION.

GENERAL NOTES:

1,531 954 ALL

TRANSFORMER VAULT C09

UNLESS NOTED OTHERWISE, HOT TAPPING WILL BE REQUIRED FOR CHILLED WATER SUPPLY AND RETURN LINES FOR INSTALLATION OF DRY WELL TYPE INSERTION TEMPERATURE

SENSORS FOR TOTAL ENERGY DATA COLLECTION. REFER TO PLANS FOR LOCATIONS.

GE DF868 ULTRASONICS METERS ARE STRAP‐ON TYPE METERS.

METROLOGY BUILDING 220

SERVICE ENTRANCE

PANEL PB.B.4 (E)

POLES 42 VOLTS 120/208 VOLTS MOUNTING SURFACE NOTES:

SECT 1 PH/WIRE 3 PHASE/4 WIRE (A, B, C, N, EG) LOCATION ELECT. RM 272

AIC 10,000 MAIN 100 AMPS MCB FED FROM PANEL H2

NEUTRAL 100 %

LOAD CKT PHASE KVA CKT LOAD

LOAD DESCRIPTION KVA FEEDER TRIP # A B C # TRIP FEEDER KVA LOAD DESCRIPTION

(N) FLOW METER CONTROLS 0.18 2 #12, #12 GD, 3/4"C. 20 1 0.18 2 20 SPARE

SPACE 20 3 4

LIGHTS SUB-BSMT. 0.90 20 5 1.26 6 20 0.36 WATER COOLER

RECEPT. RMS. B50, B52 0.54 20 7 0.86 8 20 0.32 LIGHTS GEN. RM.

RECEPT. RMS. B50, B52 0.54 20 9 0.86 10 20 0.32 LIGHTS GEN. RM.

LIGHTS GEN. RM. 0.90 20 11 1.22 12 20 0.32 LIGHTS GEN. RM.

LIGHTS GEN. RM. 0.90 20 13 1.33 14 20 0.43 LIGHTS BATTERY RM.

LIGHTS GEN. RM. 0.90 20 15 1.33 16 20 0.43 LIGHTS BATTERY RM.

LIGHTS GEN. RM. 0.90 20 17 1.33 18 20 0.43 LIGHTS BATTERY RM.

LIGHTS GEN. RM. 0.90 20 19 1.98 20 20 1.08 L5-30R MECH. RM.

LIGHTS GEN. RM. 0.90 20 21 #REF! 22 20 1.08 L5-30R MECH. RM.

LIGHTS GEN. RM. 0.90 20 23 1.26 24 20 0.36 (E) LOAD

(E) LOAD 0.54 20 25 0.90 26 20 0.36 (E) LOAD

(E) LOAD 0.54 20 27 0.90 28 20 0.36 (E) LOAD

(E) LOAD 0.54 20 29 0.90 30 20 0.36 (E) LOAD

(E) LOAD 0.54 20 31 0.90 32 20 0.36 (E) LOAD

(E) LOAD 0.54 20 33 0.54 34 20 SPARE

(E) LOAD 0.54 20 35 0.54 36 20 SPARE

(E) LOAD 0.54 20 37 0.54 38 20 SPARE

SPACE 39 40 20 SPARE

SPACE 41 42 20 SPARE

TOTAL CONNECTED KVA PER PHASE 6.7 #REF! 6.5

LOAD COMPUTATIONS AND MINIMUM FEEDER AMPACITY

CATEGORY CONNECTED KVA DMD FACTOR DMD KVA DEMAND AMPS MULTIPLIER MIN AMPACITY

LIGHTING 9.5 1.25 11.8 33 1.00 33

RECEPTACLES 9.2 NEC TABLE 220-13 9.2 26 1.00 26

KITCHEN EQUIPMENT - 0.65 - - 1.00 -

LARGEST MOTOR 1.25 - - 1.00 -

OTHER LOADS 0.2 1.00 0.2 0 1.00 0

DEMAND AMPS 59

NOTES