Exhibit A - Pricing Tables.xlsx

XLSX spreadsheet 622 KB Posted Jul 1, 2011

Attached to: Supply Chain Management Services - 100% Full and Open Competition
Solicitation number: SAQMMA11R0186
Issued by: Department of State Office of Acquisition Management

About this file

From the source

Exhibit A Pricing Table

View the file

Other files

File	Type	Posted
Solicitation Supply Chain Management A006.docx	DOCX document	Aug 19, 2011
SF30 Supply Chain Management A006.docx	DOCX document	Aug 19, 2011
Exhibit A Pricing Tables A006.xlsx	XLSX spreadsheet	Aug 19, 2011
SF30 Continuation Page A006.docx	DOCX document	Aug 19, 2011
SF30 Supply Chain Management A005.docx	DOCX document	Aug 18, 2011
Appendix J-1 Projected Workload Table A004.xlsx	XLSX spreadsheet	Aug 11, 2011
SF30 Supply Chain Management A004.docx	DOCX document	Aug 11, 2011
SF30 Continuation Page A004.docx	DOCX document	Aug 11, 2011
Solicitation Supply Chain Management A004.docx	DOCX document	Aug 11, 2011
Exhibit A Pricing Tables A004.xlsx	XLSX spreadsheet	Aug 11, 2011
Solicitation Supply Chain Management A003.docx	DOCX document	Aug 1, 2011
Exhibit A Pricing Tables A003.xlsx	XLSX spreadsheet	Aug 1, 2011
SF30 Supply Chain Management A003.docx	DOCX document	Aug 1, 2011
Exhibit A Pricing Tables A002.xlsx	XLSX spreadsheet	Jul 29, 2011
SF30 Supply Chain Management A002.docx	DOCX document	Jul 29, 2011
Appendix J-1 Projected Workload Table A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Appendix J-2 Quality Assurance Surveillance Plan A002.docx	DOCX document	Jul 29, 2011
Appendix J-10 Product Comparison Template A002.docx	DOCX document	Jul 29, 2011
SF30 Continuation Pages A002.docx	DOCX document	Jul 29, 2011
Solicitation Supply Chain Management A002.docx	DOCX document	Jul 29, 2011
Exhibit H Equipment Repairs A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit B OCONUS Delivery Locations A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit F Past Performance Questionnaire A002.docx	DOCX document	Jul 29, 2011
Exhibit I TDB Test Equipment A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit G Government Stock On-Hand A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Appendix J-16 Security Procedures for Consolidated Receiving Points A002.doc.docx	DOCX document	Jul 29, 2011
Appendix J-17 DD254.pdf	PDF	Jul 29, 2011
Appendix J-18 SCA Wage Determination.pdf	PDF	Jul 29, 2011
Exhibit D Historical Equipment Usage A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit C CONUS Delivery Locations A002.xlsx	XLSX spreadsheet	Jul 29, 2011
A001 - Change Page.docx	DOCX document	Jul 8, 2011
A001 - SF 30 Supply Chain Management.doc.docx	DOCX document	Jul 8, 2011
Appendix J-15 Technical Bulletin Template.docx	DOCX document	Jul 1, 2011
Appendix J-3 Acronyms and Definitions.docx	DOCX document	Jul 1, 2011
Exhibit B OCONUS Delivery Locations.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-12 Pilot Project Plan Template.docx	DOCX document	Jul 1, 2011
Appendix J-6 Customer Technology Requirement Template.docx	DOCX document	Jul 1, 2011
Appendix J-11 Product Evaluation Template.docx	DOCX document	Jul 1, 2011
Exhibit E Historical Workload Information.docx	DOCX document	Jul 1, 2011
Appendix J-7 Technology Needs Assessment Template.dotx.docx	DOCX document	Jul 1, 2011
Appendix J-16 Security Procedures for Consolidation Receiving Points.doc	DOC document	Jul 1, 2011
Appendix J-13 Deployment Documentation Package.docx	DOCX document	Jul 1, 2011
Appendix J-1 Projected Workload Table.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-5 Equipment and System Types.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-10 Product Comparison Template.docx	DOCX document	Jul 1, 2011
Exhibit C CONUS Delivery Locations.xlsx	XLSX spreadsheet	Jul 1, 2011
Exhibit F Past Performance Questionnaire.docx	DOCX document	Jul 1, 2011
Appendix J-8 Concept of Operations Template.docx	DOCX document	Jul 1, 2011
Appendix J-2 Quality Assurance Surveillance Plan.docx	DOCX document	Jul 1, 2011
Appendix J-14 New Product Bulletin Template.docx	DOCX document	Jul 1, 2011

Show 40 more

Latest 50 of 55 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1. Compliance Checklist

	Pricing Table 1	Price Volume Compliance Checklist
	RFP
Reference	Requirement	Comply
(Yes/No)	Proposal Reference
	L.16.2 (1)	The electronic price proposal shall consist of the following, which are described further in this subsection:

a. Narrative (in Word or PDF)

b. Pricing Tables 1-7 (in one Excel workbook)

c. Detail Pricing Tables (for Pricing Tables 5-7) (in a second Excel workbook)

d. Supporting Information (in Word or PDF)

Offerors shall prepare on a CD-ROM one electronic file for each of the above sections. Therefore, offerors shall prepare four files on each CD-ROM.

L.16.2 (2) The hard-copy price proposal shall consist of the following, which are described further in this subsection:

a. Narrative

b. Pricing Tables 1-7

c. Detail Pricing Tables (for Pricing Tables 5-7)

d. Supporting Information

Offerors shall separate each of the above sections by a distinct tab and divider page.

L.16.2 (3)	The content of the electronic price proposal and hard-copy price proposal shall match. If differences exist between the two proposals and there is insufficient time for reconciliation, the hard-copy proposal shall take precedence.
L.16.2 (4)	Pricing Tables 1-7 are provided by the Government and shall be completed by the offerors. Detail Pricing Tables (for Pricing Tables 5-7) shall be provided by the offerors.
L.16.2 (5)	Offerors shall not alter the existing format or content in Pricing Tables 1-7. Offerors shall complete the required areas only.
L.16.2 (6)	Offerors shall not add or delete cost elements in Pricing Tables 4-7.
L.16.2 (7)	In Pricing Table 1, offerors shall complete the “Comply (Yes/No)” and “Proposal Reference” columns.
L.16.2 (8)	In Pricing Table 2, offerors shall add or delete rows as necessary. The number (e.g., “1)”) in the “Indirect Cost Rate Description” column signifies a specific indirect cost rate description; for example, an offeror may elect to propose “Fringe Benefits” next to “1)”, “Overhead” next to “2)”, and “G&A” next to “3)”.
L.16.2 (9)	In Pricing Table 2, offerors shall propose their most current provisional billing rates. If applicable, these rates should be reflected in the most current indirect cost rate agreement that has been negotiated between the offeror and its cognizant Federal agency official.
L.16.2 (10)	In Pricing Table 2, each row will apply to a different Contractor Fiscal Year Period, which offerors shall identify with month, day, and year in the right-most column. Offerors shall propose a Contractor Fiscal Year Period for each of its fiscal years through the life of the contract. Offerors shall assume that the life of the contract is November 1, 2011 through October 31, 2016.
L.16.2 (11)	In Pricing Table 3, offerors shall add or delete rows as necessary. The number (e.g., “1)”) in the “Indirect Cost Rate Description” column signifies a specific indirect cost rate description. For example, an offeror may elect to propose “Fringe Benefits” next to “1)”, “Overhead” next to “2)”, and “G&A” next to “3)”.
L.16.2 (12)	In Pricing Table 3, each row will apply to a different Contractor Fiscal Year Period, which offerors shall identify with month, day, and year in the right-most column. Offerors shall propose a Contractor Fiscal Year Period for each of its fiscal years through the life of the contract. Offerors shall assume that the life of the contract is November 1, 2011 through October 31, 2016.
L.16.2 (13)	In Pricing Tables 2 and 3, the proposed provisional and ceiling indirect cost rates, respectively, shall include labor costs to handle the functions described in the solicitation for CLINs X004, X005, and X008.
L.16.2 (14)	In Pricing Table 4, offerors shall propose one fee percentage per contract year per cost-plus-fixed-fee CLIN.
L.16.2 (15)	In Pricing Table 4, the proposed fee percentages shall not exceed two decimal places and shall not exceed the 10% statutory limitation identified in FAR 15.404-4(c)(4)(i)(C).
L.16.2 (16)	In Pricing Tables 4-7, offerors shall use for pricing purposes the following period of performance:

Base Year: November 1, 2011 through October 31, 2012 Option Year 1: November 1, 2012 through October 31, 2013 Option Year 2: November 1, 2013 through October 31, 2014 Option Year 3: November 1, 2014 through October 31, 2015 Option Year 4: November 1, 2015 through October 31, 2016

L.16.2 (17)	In Pricing Table 5, offerors shall propose one firm-fixed-unit-price per contract year for each known equipment.
L.16.2 (18)	In Pricing Table 5, each proposed firm-fixed-unit-price shall include only the known equipment costs, applicable indirect costs, and profit. Applicable indirect costs shall include labor costs to handle the functions described in the solicitation for CLIN X003.
L.16.2 (19)	In Pricing Table 5, unless otherwise specified in the Description column, offerors shall assume a quantity of one for each known equipment.
L.16.2 (20)	In Pricing Table 5, the proposed firm-fixed-unit-prices shall not exceed two decimal places and shall be in United States currency.
L.16.2 (21)	In Pricing Table 6, offerors shall propose one fixed fully-loaded hourly labor rate per labor category/sub-CLIN per year, regardless of which entity (offeror, subcontractor offeror, or other) is anticipated to perform the labor category.
L.16.2 (22)	In Pricing Table 6, offerors shall base their proposed fixed fully-loaded hourly labor rates on a normal workweek of 40 hours. A normal workweek is defined in FAR 22.103-1.
L.16.2 (23)	In Pricing Table 6, each proposed fixed fully-loaded hourly labor rate shall consist of a proposed unloaded hourly rate, fringe benefits (if not part of applicable indirect costs), applicable indirect costs, and profit. It shall not consist of any other costs. [Any other costs that are part of the Contractor’s established compensation plan and consistent with FAR Part 31 may be allocated during contract performance under CLIN X008 (Other Supplies). Furthermore, any cost elements included in the proposed and negotiated fixed fully-loaded hourly labor rates shall not be allocated elsewhere under this contract].
L.16.2 (24)	In Pricing Table 6, the proposed fixed fully-loaded hourly labor rates shall not exceed two decimal places and shall be in United States currency.
L.16.2 (25)	In Pricing Table 6, the Government provided formulas to calculate automatically each proposed Subtotal, which is Positions Per Year multiplied by Fixed Rate multiplied by Hours. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (26)	In Pricing Table 6, the Government provided formulas also to calculate automatically the proposed Total and Grand Total prices. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (27)	In Pricing Table 7, offerors shall not enter data in the gray areas. These areas are inapplicable.
L.16.2 (28)	In Pricing Table 7, the Subtotals for CLINs X001, X002, and X006 shall be the respective proposed firm-fixed-prices.
L.16.2 (29)	In Pricing Table 7, the Subtotals for CLINs X001, X002, and X006 shall match the respective proposed firm-fixed-prices in the offeror’s Detail Pricing Table (for Pricing Table 7).

L.16.2 (30)	In Pricing Table 7, the Subtotals for CLIN X003 shall match the respective proposed Subtotals in Pricing Table 5 (Firm-fixed-unit-prices). The Government provided formulas to transfer automatically the respective proposed Subtotals from Pricing Table 5, but offerors shall verify that the Subtotals match and make any necessary corrections.
L.16.2 (31)	In Pricing Table 7, for CLINs X004, X005, and X008, the Ce Rate(s) shall match the respective proposed ceiling indirect cost rate(s) in Pricing Table 3 (Ceiling Indirect Cost Rates). Offerors shall ensure that the proposed ceiling indirect cost rates in Pricing Table 7 are for the contractor fiscal year(s) that coincides with the contract performance year.
L.16.2 (32)	In Pricing Table 7, for CLINs X004, X005, and X008, the offeror shall apply only the indirect cost rate descriptions (e.g., G&A) that are usually allocated to equipment, transportation, and services/maintenance agreements, respectively, in accordance with the offeror’s established or disclosed cost accounting practices.
L.16.2 (33)	In Pricing Table 7, the respective RFP Costs for CLINs X004, X005, and X008 are an annual estimate. For each contract year, offerors shall multiply the applicable proposed ceiling indirect cost rate(s) by the RFP Cost, the product of which shall be reflected in the Ind $ column.
L.16.2 (34)	In Pricing Table 7, the Fee % for CLINs X004 and X005 shall match the respective proposed fee percentages in Pricing Table 4 (Fee Percentages). The Government provided formulas to transfer automatically the respective proposed fee percentages from Pricing Table 4, but offerors shall verify that the fee percentages match and make any necessary corrections.
L.16.2 (35)	In Pricing Table 7, for CLINs X004 and X005, the Government provided formulas to calculate automatically each proposed Fixed Fee, which is the Fee % multiplied by the sum of the RFP Cost and Ind $. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (36)	In Pricing Table 7, for CLINs X004 and X005, the Subtotal shall reflect the sum of the RFP Cost, Ind $, and Fixed Fee.
L.16.2 (37)	In Pricing Table 7, the Subtotals for CLIN X007 shall match the respective proposed Totals in Pricing Table 6 (Fixed Labor Rates). The Government provided formulas to transfer automatically the respective proposed Totals from Pricing Table 6, but offerors shall verify that the amounts match and make any necessary corrections.
L.16.2 (38)	In Pricing Table 7, for CLIN X008, the Subtotal shall reflect the sum of the RFP Cost and Ind $.
L.16.2 (39)	In Pricing Table 7, the Government provided formulas to calculate automatically the proposed Subtotal, Total, and Grand Total prices. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (40)	In Pricing Table 7, the proposed Subtotal, Total, and Grand Total prices shall be in whole numbers; they shall not contain decimals.
L.16.2 (41)	In Detail Pricing Table (for Pricing Table 5), offerors shall show for each contract year the breakdown of each proposed firm-fixed-unit-price. Proposed indirect cost rate(s) shall include labor costs to handle the known equipment functions described in the solicitation. The breakdown shall consist of at least the following:

a. Each proposed known equipment cost

b. Each proposed indirect cost rate description (e.g., Material Handling, G&A)

c. Each proposed indirect cost rate

d. Each proposed indirect cost

e. Proposed profit percentage

f. Proposed profit dollar amount

g. Subtotal for each known equipment

h. Subtotal for all known equipment

L.16.2 (42)	In Detail Pricing Table (for Pricing Table 5), offerors shall show with formulas the arithmetic process by which they calculated their proposed firm-fixed-unit-prices.
L.16.2 (43)	In Detail Pricing Table (for Pricing Table 6), offerors shall include a crosswalk from each RFP-specified labor category in Pricing Table 6 to the offerors’ internal labor category. If the offeror’s internal labor category matches the RFP-specified labor category, the offeror shall list the name of the labor category in both the RFP-specified Labor Category column and Internal Labor Category column of its crosswalk.
L.16.2 (44)	In Detail Pricing Table (for Pricing Table 6), offerors shall show for each performance year the build-up of each fixed fully-loaded hourly labor rate proposed in Pricing Table 6 (see exception under item 66 below). Offerors shall identify on the build-up schedule:

a. proposed unloaded hourly labor rate

b. each proposed fringe benefits description (if not included in an indirect cost pool)

c. each proposed fringe benefits cost (if not included in an indirect cost pool)

d. each proposed indirect cost rate description (e.g., Overhead, G&A)

e. each proposed indirect cost rate

f. each proposed indirect cost

g. proposed profit percentage

h. proposed profit dollar amount

i. proposed fixed fully-loaded hourly labor rate

L.16.2 (45)	In Detail Pricing Table (for Pricing Table 6), offerors shall show with formulas the arithmetic process by which they calculated their proposed fixed fully-loaded hourly labor rates in Pricing Table 6.
L.16.2 (46)	Offerors shall verify that the proposed fixed fully-loaded hourly labor rates in Pricing Table 6 match the respective proposed fixed fully-loaded hourly labor rates in Detail Pricing Table (for Pricing Table 6).
L.16.2 (47)	In Detail Pricing Table (for Pricing Table 6), offerors shall specify next to each RFP-specified labor category from Pricing Table 6 whether the proposed fixed fully-loaded hourly labor rate applies to labor performed by: 1) the offeror; 2) subcontractor offeror(s); and/or 3) divisions, subsidiaries, or affiliates of the offeror under a common control.
L.16.2 (48)	In Detail Pricing Table (for Pricing Table 7), for CLINs X001, X002, and X006, offerors shall show for each contract year the breakdown of each proposed firm-fixed-price. The breakdown shall consist of at least the following:

Labor

a. Each labor category

b. Number of positions for each labor category

c. Proposed number of hours per position

d. Proposed unloaded hourly labor rate per position

e. Each proposed fringe benefits description (if not included in an indirect cost pool)

f. Each proposed fringe benefits cost (if not included in an indirect cost pool)

g. Each proposed indirect cost rate description (e.g., Overhead)

h. Each proposed indirect cost rate

i. Each proposed indirect cost

j. Proposed profit percentage

k. Proposed profit dollar amount

l. Subtotal for each labor category

m. Subtotal for Labor (sum of subtotals for all labor categories)

	L.16.2 (48)
(continued)	Non-labor

a. Each proposed cost element

b. Proposed unit cost per cost element

c. Proposed unit of measurement per cost element

d. Proposed quantity per cost element

e. Each proposed indirect cost rate description (e.g., G&A)

f. Each proposed indirect cost rate

g. Each proposed indirect cost

h. Proposed profit percentage

i. Proposed profit dollar amount

j. Subtotal for each cost element

k. Subtotal for Non-labor (sum of subtotals for all cost elements)

Labor and Non-labor

a. Proposed firm-fixed-price (sum of subtotals for Labor and Non-labor)

L.16.2 (49)

In Pricing Table 7 and Detail Pricing Table (for Pricing Table 7), for CLINs X001, X002, and X006, offerors shall propose firm-fixed-prices based on a 40-hour normal workweek.

L.16.2 (50)

In Detail Pricing Table (for Pricing Table 6), for CLIN X007, offerors shall identify the hours in excess of an average of 40 hours per week, by labor category at the same level of detail as compensated hours, and the uncompensated overtime rate per hour, whether at the prime or subcontract level, for any proposed hours against which an uncompensated overtime rate is applied [see FAR 52.237-10 (“Identification of Uncompensated Overtime”)]. This includes uncompensated overtime hours that are in indirect cost pools for personnel whose regular hours are normally charged direct.

L.16.2 (51)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall complete all applicable data cells.
L.16.2 (52)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall not hide or lock any rows, columns, or cells that contain proposed data.
L.16.2 (53)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall propose all rates, costs, and prices in United States currency.
L.16.2 (54)	In the Narrative, offerors shall identify the basis of estimate of their proposed unloaded hourly labor rates and indirect cost rates that comprise their respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, and X007. The proposed indirect cost rates that comprise the respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, and X007 in Pricing Tables 6 and 7 do not have to match the proposed provisional billing rates in Pricing Table 2 (Provisional Billing Rates) or the proposed ceiling indirect cost rates in Pricing Table 3 (Ceiling Indirect Cost Rates).
L.16.2 (55)	In the Narrative, offerors shall identify the basis of estimate of their proposed indirect cost rate(s) that comprise their proposed firm-fixed-unit-prices for CLIN X003. The proposed indirect cost rates that comprise the proposed firm-fixed-unit-prices for CLIN X003 in Pricing Table 5 do not have to match the proposed provisional billing rates in Pricing Table 2 (Provisional Billing Rates) or the proposed ceiling indirect cost rates in Pricing Table 3 (Ceiling Indirect Cost Rates).
L.16.2 (56)	In the Narrative, offerors shall verify that the proposed labor rates comprising the respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, and X007 are representative of the skill level required and work to be performed under the contract.
L.16.2 (57)	In the Narrative, offerors shall identify the number of hours in their normal workweek.
L.16.2 (58)	In the Narrative, offerors shall identify their proposed subcontractors.
L.16.2 (59)	In the Narrative, for CLINs X004, X005, and X008, offerors shall address the items in FAR 52.215-22 (Limitations on Pass-Through Charges).
L.16.2 (60)	In the Narrative, offerors shall identify the name and full contact information of their cognizant Federal auditor (e.g., local Defense Contract Audit Agency branch).
L.16.2 (61)	In the Narrative, offerors shall identify the name and full contact information of their cognizant Federal agency official (CFAO). The CFAO works in the offeror’s cognizant Federal agency, which is normally the agency with which the offeror has the largest dollars in negotiated contracts, including option periods.
L.16.2 (62)	In the Supporting Information, offerors shall submit evidence to support the proposed provisional billing rates in Pricing Table 2. Examples are a current negotiated indirect cost rate agreement with the offeror’s cognizant Federal agency official or recent (within the last two years) Defense Contract Audit Agency (DCAA) audit report.
L.16.2 (63)	In the Supporting Information, offerors shall include a copy of their policy addressing uncompensated overtime.
L.16.2 (64)	In the Supporting Information, for CLINs X001, X002, X003, X006, and X007, offerors, in accordance with FAR 15.404-3(b) (Subcontract Pricing Considerations), shall conduct appropriate cost or price analyses to establish the reasonableness of proposed subcontract prices, and shall include the results of these analyses. Results shall be in the form of the cost/price analysis report(s), which shall include: cost/price analysis technique(s) used (e.g., comparison of proposed prices received in response to the solicitation), summary findings, detailed findings, and basis for the determination of fair and reasonable proposed subcontract prices. For CLIN X007, “proposed subcontract prices” shall mean “subcontractor offeror’s proposed or negotiated fully-loaded hourly labor rates.”
L.16.2 (65)	At this time, the Government does not require submission of subcontractor offerors’ build-up of their proposed or negotiated fully-loaded hourly labor rates, or breakdown of subcontractor offerors’ proposed or negotiated non-labor prices, but the (prime) offeror shall show on its build-up schedule in Detail Pricing Table (for Pricing Tables 5-7) any applicable indirect costs and profit it applied to the subcontractor offerors’ proposed or negotiated fully-loaded hourly labor rates and non-labor prices.

&"Times New Roman,Regular"&12S-AQMMA-11-R-0186 Supply Chain Management &"Times New Roman,Regular"&12EXHIBIT A &"Times New Roman,Regular"&12Department of State

2. Provisional Billing Rates

	Pricing Table 2		Proposed Provisional Billing Rates
	Indirect Cost Rate Description (e.g., Fringe Benefits, Overhead, G&A)	Proposed Provisional Billing Rate	Basis of Estimate of Proposed Provisional Billing Rate
(e.g., Negotiated Indirect Cost Rate Agreement with Cognizant FAO)	Allocation Base
(e.g., Direct Labor Dollars, Total Cost Input)	Contractor Fiscal Year Period

(e.g., January 1, 2011 - December 31, 2011) 1)

THE FOLLOWING IS FOR ILLUSTRATION PURPOSES ONLY:

Indirect Cost Rate Description	Proposed Provisional Billing Rate	Basis of Estimate of Proposed Provisional Billing Rate	Allocation Base
Contractor Fiscal Year Period

1) G&A 6.29% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2011 - December 31, 2011 G&A 6.27% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2012 - December 31, 2012 G&A 6.25% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2013 - December 31, 2013 G&A 6.00% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2014 - December 31, 2014 G&A 5.95% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2015 - December 31, 2015 G&A 5.80% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2016 - December 31, 2016

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004 and X005) and the CLIN containing the

materials portion (CLIN X008) of the time-and-materials arrangement.

2) The Contractor may recover, if consistent with FAR Part 31 and the Contractor’s established or disclosed cost accounting practices,

allowable, reasonable, and allocable indirect costs.

3) Subcontractor indirect cost rates are not incorporated above.

4) The Contractor shall be reimbursed: 1) only the indirect cost rate descriptions identified in the table unless prior written approval

was obtained by the Contractor’s cognizant Federal agency official; and 2) at the negotiated provisional billing rates until revised billing rates or

final indirect cost rates have been established by the Contractor’s cognizant Federal agency official.

5) If any revised billing rate established by the Contractor’s cognizant Federal agency official exceeds this contract’s respective ceiling indirect cost

rate (see Section B.4), the Contractor shall be reimbursed at the contract’s ceiling indirect cost rate.

6) The Contractor shall make no change to its established or disclosed method of classifying or allocating indirect costs without the prior written

approval of the Contractor’s cognizant Federal agency official.

7) The Contractor’s fiscal year period is the period used by the Contractor for cost accounting purposes.

S-AQMMA-11-R-0186

EXHIBIT A Department of State

3. Ceiling Indirect Cost Rates Pricing Table 3 Proposed Ceiling Indirect Cost Rates

	Indirect Cost Rate Description (e.g., Fringe Benefits, Overhead, G&A)	Proposed Ceiling Indirect Cost Rate	Basis of Estimate of Proposed Ceiling Indirect Cost Rate
(e.g., Negotiated Indirect Cost Rate Agreement with Cognizant FAO)	Allocation Base
(e.g., Direct Labor Dollars, Total Cost Input)	Contractor Fiscal Year Period

(e.g., January 1, 2011 - December 31, 2011) 1)

THE FOLLOWING IS FOR ILLUSTRATION PURPOSES ONLY:

Indirect Cost Rate Description Proposed Ceiling Indirect Cost Rate Basis of Estimate of Proposed Ceiling Indirect Cost Rate Allocation Base Contractor Fiscal Year Period

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004 and X005) and the CLIN containing the

materials portion (CLIN X008) of the time-and-materials arrangement.

2) The negotiated ceiling indirect cost rates will generally apply when settling the contract’s final indirect costs for each of the Contractor’s

fiscal years in conjunction with the contract’s period of performance.

3) The negotiated ceiling indirect cost rates will be compared to the respective established final indirect cost rates, and the Government

shall pay the lesser of the negotiated ceiling indirect cost rates and the respective established final indirect cost rates.

4) If the Government uses the quick-closeout procedure provided in FAR 52.216-7 (Allowable Cost and Payment), the Government will not pay

indirect cost rates that exceed the respective negotiated ceiling indirect cost rates.

S-AQMMA-11-R-0186

EXHIBIT A Department of State

4. Fee Percentages

Pricing Table 4 Proposed Fee Percentages

CLIN Description Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

X004 Sourcing and Procurement, Order Fulfillment, and Staging (unknown equipment/need quotes)

X005 Transportation

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004 and X005).

2) Offerors shall propose one fee percentage per contract year per CLIN.

3) The proposed fee percentages shall not exceed two decimal places.

4) The proposed fee percentages shall not exceed the statutory limitation of 10.00%.

S-AQMMA-11-R-0186

EXHIBIT A Department of State

5. Firm-fixed-unit-prices

Notes
1) Offerors shall propose one firm-fixed-unit-price per contract year for each known equipment.
2) Each proposed firm-fixed-unit-price shall include only the known equipment costs, applicable indirect costs, and profit.
3) Unless otherwise specified in the Description column, offerors shall assume a quantity of one for each known equipment.
4) The proposed firm-fixed-unit-prices shall not exceed two decimal places and shall be in United States currency.
5) The Contractor shall be paid only at the negotiated firm-fixed-unit-prices.
6) The proposed Subtotal prices in row 6962 at the end of this table are being used for price evaluation purposes for award of the contract, but the proposed firm-fixed-unit-prices will be used to
negotiate the firm-fixed-unit-prices for Section B.6 of the contract.
7) The Government provided formulas to transfer automatically the proposed Subtotal prices at the end of this table to the respective applicable cells under CLIN X003 in Pricing Table 7.
#	ITEM	DESCRIPTION	MANUFACTURER	MODEL	BASE YEAR PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 1 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 2 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 3 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 4 PROPOSED FIRM-FIXED-UNIT-PRICE
1	009593	TAPE 3/4" X 66' ELECTRICAL	3M TELCOM	35-BLUE-3/4
2	059476	1-PORT JACK SURFACE MOUNT 6W6P	SUTTLE	625A2-6-50
3	063664	CABLE MANAGEMENT D-RING	CPI	10943-000
4	080783	INSERTION/EXTRACTION TOOL FOR	TYCO/AMP	91067-2
5	104689	CABLE TIE 14.5" 50LB	PANDUIT	PLT4S-C0
6	104693	CABLE TIE 3.62" 18LB .625" BU	T&B	TY523M
7	104699	CABLE TIE 7.31" 50LB 1.75" BU	T&B	TY525M
8	104702	CABLE TIE 11.08" 40LB 3" BUND	T&B	TY526M
9	152011	2-F JUMPER 3.3FT/1MT 62.5/125	COMPU-LINK	STCSCCD1
10	169712	BRACKET HINGED WALL	PANDUIT	WBH2
11	175043	1-PORT BLANK INSERT	PANDUIT	CMBBL-X
12	185423	LOUD RINGING/TONES OVER	VIKING ELE	K-600F
13	187616	1" CORRUGATED LOOM TUBING SLIT	PANDUIT	CLT100F-C20
14	191198	P TOUCH TAPE	BROTHER IN	TZ/E-231
15	200703	THERMAL LABELING SYSTEM W/ HA	BRADY CORP	TLS2200
16	200705	BATTERY CHARGER	BRADY CORP	TLS2200-BC
17	200708	BLACK RIBBON FOR TLS2200	BRADY CORP	R4310
18	200798	LABEL 1" X 2.5" X .75" 1"W X	BRADY CORP	PTL-21-427
19	201078	12-PORT BLANK PANEL	PANDUIT	CWPP12WBL
20	208029	1/2" CORRUGATED LOOM TUBING	PANDUIT	CLT50F-C20
21	222660	BREAKOUT KIT FIELD FOR 1-6	BELDEN/CDT	AX101100
22	231237	VENTED CANTILEVER SHELF	MIDDLE ATL	U317
23	232968	CONTROL FOR MATRIX SWITCHERS	PELCO	KBD300A
24	240109	SWITCHER MINI MATRIX 48 X 8	PELCO	CM6800E-48X8
25	241914	TOOLPAK MAGNETIC METER HANGIN	FLUKE NET	TPAK
26	243120	RACK 4 RMU 7" HIGH BLACK 16"	MIDDLE ATL	RK4
27	243790	1-PORT MOD JACK IDC 6W6P UTP	PANDUIT	CJ66IGY
28	245909	HEAVY-DUTY LONG NOSE PLIERS W	KLEIN	J203-8N
29	246187	1" X 2.5" WRAP AROUND WIRE LA	BRADY CORP	BPTL-21-427
30	246614	PULLING LUBRICANT 1 QUART SQU	IDEAL INDU	31-388
31	247522	STEEL FISH TAPE 1/8IN X 125FT	GREENLEE	FTS438-125
32	247523	STEEL FISH TAPE 1/8IN X 240FT	GREENLEE	FTS438-240
33	247524	WIRE PULLING LUBRICANT	GREENLEE	GEL-Q
34	248556	FISH STIX 12 FOOT KIT	GREENLEE	540-12
35	252428	REPLACEMENT RIBBON FOR TLS220	BRADY CORP	R6210
36	258105	COUPLING GALVANIZED STEEL FOR	WIREMOLD	2401
37	258108	COVER CLIP FOR V2400 RACEWAY	WIREMOLD	V2406
38	269086	CRIMP TOOL FOR LEVITON MODULAR	LEVITON	40989-RCT
39	270046	FAST ETHERNET MEDIA CONVERTER	ALLIED TEL	AT-MC115XL-60
40	273624	CAGE RACK	GE SECURIT	503H
41	273642	POWER SUPPLY DC 110-240 IN, 1	GE SECURIT	614P
42	275886	P-TOUCH 1400 LABEL PRINTER	BROTHER IN	PT-1400
43	288842	GOOSENECK WALL MOUNT FOR DOMES	VIDEOLARM	WM20G
44	303616	12-PORT MOD FACEPLATE PATCH	PANDUIT	NKFP12W
45	304945	HOLD UP BUTTON	UNITED SEC	HUB2SA
46	307423	SNAP-ON FIXTURE HANGER	ERICO	512
47	313875	LABEL DISPENSER KIT 1"WX1.25"	PANDUIT	S100X125VARY
48	315112	OUTDOOR DOME HOUSING FOR FXED	PANASO SEC	POD8CF
49	315114	OUTDOOR DM HOUSING FR UNITIZD	PANASO SEC	POD9C
50	317586	VOLTAGE DETECTOR 90-1000V	FLUKE IND	FLUKE-1AC-A1-II
51	317701	BATTERY	UNIVERSAL	UB1280
52	319348	1-PORT MOD JACK 110 8W8P UTP	PANDUIT	NK688MGR
53	321281	16" STEEL POLE, 4' X 4' SQUAR	VIDEOLARM	P1600
54	323-011-1201-B	12-1P PLTC STR TNC PVC NS PVC	BELDEN	9412 0601000
55	323-011-1401-B	14-1P PLTC STR TNC PVC NS PVC	BELDEN	9411 0601000
56	32477	10-IN-1 SCREWDRIVER/NUT DRIVE	KLEIN	32477
57	328248	CAMCLOSURE IN-CLG CLR DOME	PELCO	ICS151-CDV39A
58	338499	OPEN FRAME TRANSFORMER 24VAC/	ALTRONIX	T2428100
59	342971	8 CHANNEL CONTACT RX, MM,	GE SECURIT	DR3010-R3
60	346985	RECESSED CEILING MT FOR	PANASO SEC	WV-Q166
61	347820	8 CHANNEL CONTACT RX, MM,	INTL FIBER	DT3010-R3
62	348996	COMPLETE DTX-1800 COPPER/FIBER	FLUKE NET	DTX-1800MSO120
63	356302	1800 LB DUAL VOLTAGE MAG BOND	SECURITRON	M82GB
64	356322	RECESSED CEILING MOUNT	PANASO SEC	WV-Q169
65	362453	OUTDOOR CORNER MOUNT	PANASO SEC	PCM484S
66	366331	ENCLOSURE, NEMA, TYPE 1 12"H	HOFFMAN	A12N124
67	366348	PERFORATED BACK PANEL FOR 12"	HOFFMAN	A12N12PP
68	366681	TYPE 3R SCREW COVER,	HOFFMAN	A24R246
69	366687	TYPE 3R HINGED COVER 8"H X 8"	HOFFMAN	A8R86HCR
70	367263	WALL MOUNT WITH 1 ARM AND	PELCO	PMCL-WM1A
71	368016	1 X 1.5 FIBER COAX CABLE	BRADY CORP	PTL-104-427
72	368475	ANCHORING JIG	VIDEOLARM	PV4
73	369299	CEILING MOUNT&TELESCOPING POLE	PELCO	PMCL-CMP
74	370-949-FDDI-24	24-F 62.5/125 OM1 TB PLEN MIC	CORNING-C	024K88-33130-29
75	372-COR62.5-LTD-06	6-F 62.5/125 LT DUCT/AERIAL 3	CORNING-C	006KU4-T4130D20
76	373295	CHASSIS, 9000 SERIES 8 SLOT W	OPTELECOM	9008
77	373299	FO CARD CAGE	OPTELECOM	9003-3
78	373-COR62.5-TBD-06	6-F 62.5/125 TB IN/OUT PLENUM	CORNING-C	006K8P-31130-29
79	392666	1" X 45 DEG SCHEDULE 40 NON-M	T&B	UA7AF-CAR
80	393145	CONTROLLER DOOR ENTRY FOR 4	VIKING ELE	C-2000B
81	402568	HEATER UNIT FOR WVCW504 SERIES	PANASO SEC	WV-CW5H
82	405636	HEAVY-DUTY WALL MOUNT WITH RE	VIDEOLARM	WM40W
83	411915	47 IN FHD LCD MONITOR	PELCO	PMCL547F
84	415719	INTEGRATED ENCLOSURE W/	XTEC INCOR	XNODEHB-SGL
85	415720	INTEGRATED ENCLOSURE W/	XTEC INCOR	XNODEHB-DBL
86	419540	TELECOMM MAIN GROUNDING BAR A	B-LINE	SBTMGB20
87	419689	TELECOMM MAIN GROUNDING BAR A	B-LINE	SBTMGB12K
88	419690	TELECOMM MAIN GROUNDING BAR A	B-LINE	SBTMGB20K
89	420196	MACH SCREW, FLAT, 6-32 X 3/4	GRAINGER W	5JY33
90	420202	EXTERNAL BATTERY PACK RACK/TO	AMER PWR	SMX48RMBP2U
91	421144	CONTINUOUS HINGE TYPE 4 CHNF	HOFFMAN	A606CHNF
92	422214	HANDHELD PRINTER 180 DPI, USE	BROTHER IN	PT-7600
93	423611	POWER SUPPLY / CHARGER 12VDC	ALTRONIX	AL1012ULXPD16CB
94	423913	INTELLIKEY BATTERIES	FED SECURI	100179
95	424255	LOAD CENTER BREAKER RETAINING	REXEL	PK1MB
96	425679	SMART-UPS XL 1500VA/1200WATTS	AMER PWR	SMX1500RM2UNC
97	429254	LEATHERMAN WAVE ALL-IN-ONE	DOS AMAZON	830037
98	432636	LIQUID TIGHT FLEXIBLE NON MET	GRAINGER W	4JC65
99	434376	ELBOW 45 DEGREE 1 1/2" PVC ST	T&B	UA7AH
100	440091	VINYL INSULATED BUTT SPLICE	T&B	2RA18X
101	6G-0601-01	6-1C THHN/THWN 19 STR BC 90C	AIW
102	6G-0601-02	6-1C THHN/THWN 19 STR BC 90C	NEXANS
103	6G-0601-02-500	6-1C THHN/THWN 19 STR BC	AIW
104	6G-0601-04	6-1C THHN/THWN 19 STR BC 90C	SOUTHWIRE
105	6G-0601-04-500	6-1C THHN/THWN 19 STR BC	SOUTHWIRE
106	6G-0801-01	8-1C THHN/THWN 19 STR BC	REPUBLIC W
107	6G-0801-02	8-1C THHN/THWN 19 STR BC	REPUBLIC W
108	6G-0801-04	8-1C THHN/THWN 19 STR BC	AIW
109	6G-1001-01	10-1C THHN/THWN 19 STR BC 90C	CERRO WIRE
110	6G-1001-02	10-1C THHN/THWN 19 STR BC 90C	REPUBLIC W
111	6G-1001-04	10-1C THHN/THWN 19 STR BC 90C	REPUBLIC W
112	6G-1201-01	12-1C THHN/THWN 19 STR BC	REPUBLIC W
113	6G-1201-02	12-1C THHN/THWN 19 STR BC	REPUBLIC W
114	6G-1201-03	12-1C THHN/THWN 19 STR BC	REPUBLIC W
115	6G-1201-04	12-1C THHN/THWN 19 STR BC	REPUBLIC W
116	6G-1801-04-ROHS	18-1C TFFN 16 STR BC	INDUST WIR
117	A16126T1PP	ENCLOSURE NEMA 1 W/HINGED DR	HOFFMAN	A16126T1PP
118	ADP115	RJ-12 FEMALE COUPLING USE WITH	GC WALDOM	30-9682
119	ADP117	RJ-45 FEMALE COUPLING STRAIGHT	GC WALDOM	30-9684
120	ADP175	COAXIAL ADAPTER	DIGIKEY	CP-AD515
121	ADP190	ADAPTER	EMERSON NE	27-8110
122	ADP401	COAXIAL ADAPTER KIT 30 PIECE	SPECLZD PR	3000A
123	AL1012ULXPD16CB	POWER SUPPLY / CHARGER- 12VDC	ALTRONIX	AL1012ULXPD16CB
124	ALM110	AES ALARM.RELAY OUTPUT BOARD 8	AES CORPOR	RP-50
125	ALM111	ALARM DISTRESS PUSHBUTTON SPST	GE SUPPLY	PB7LBL
126	ALM112	ALARM PUSHBUTTON SPST LIGHTED	GE SUPPLY	PB7LPB
127	ALM113	ALARM DISTRESS PUSHBUTTON SPST	BROAN-NUT	PB-18L
128	ALM116	ALARM MAGNETIC PANIC SWITCH	GE SECURIT	3045-W
129	ALM149	EXTENSION CABLE CONNECTOR	AES CORPOR	6511
130	ALM150	ALARM MONITOR	AES CORPOR	6500-24 WO BATT
131	ALM202	ALARM PWR/INTRFCE PANEL 10	ADT GOVRNT	MR-1
132	ALM205	ALARM POWER/INTERFACE PANEL	ADT GOVRNT	NONE
133	ALM206	ALARM PWR/INTERFACE PANEL 5	ADT GOVRNT	MC-4
134	ALM216	WELLS FARGO ALARM MODULES	ADT GOVRNT	AS-44/MP-44
135	ALM218	WELLS FARGO BLANK PANEL GRAY	ADT GOVRNT	BP-1A
136	ALM226	PREMISE PRINTER KIT FOR ALM340	ANIX KITS	ALM226-A
137	ALM230	WELLS FARGO ALARM COMMON	ADT GOVRNT	1103-3
138	ALM232	AES ALARM MONITOR 8 ZONE	AES CORPOR	6300-8-DST
139	ALM233	ALARM POINT MODULE SXE-2	ADT GOVRNT	EPIC-103
140	ALM235	ALARM MONITOR 8 ZONE RACK	AES CORPOR	6300-8-DSR
141	ALM236	ALARM MONITOR 16 ZONE RACK	AES CORPOR	6300-16-DSR
142	ALM237	ALARM MONITOR 24 ZONE RACK	AES CORPOR	6300-24-DSR
143	ALM241	WELLS FARGO ALARM 360 DEGREE	ADT GOVRNT	EPIC-85
144	ALM254	WELLS FARGO INTERFACE CABLE	ADT GOVRNT	4771-1
145	ALM255	WELLS FARGO TRANSFORMER 120VAC	ADT GOVRNT	4773-1
146	ALM256	WELLS FARGO INSERTION TOOL FOR	ADT GOVRNT	4781-1
147	ALM257	WELLS FARGO SXR-2 PNT MODULE	ADT GOVRNT	EPIC104
148	ALM258	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-90
149	ALM259	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-91
150	ALM262	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-95
151	ALM335	ADT EPIC 103 SURFACE MOUNTING	ADT GOVRNT	EPIC KO-3
152	ALM338	CU-40 REPLACEMENT U-6 EPROM	ADT GOVRNT	17036-1
153	ALM339	CU-40 REPLACEMENT U-7 EPROM	ADT GOVRNT	5659-1
154	ALM340	ADT CONTROL UNIT CU-40 W/	ADT GOVRNT	CU-40
155	ALM341	ADT CU-40 ACTIVITY STORAGE	ADT GOVRNT	ASM-3A
156	ALM342	ADT CU-40 REPLACEMENT	ADT GOVRNT	15313-2
157	ALM343	ADT CU-40 KEYBOARD WITH TAMPER	ADT GOVRNT	5505-5
158	ALM344	ADT CU-40 REPLACEMENT RELAY	ADT GOVRNT	15509-1
159	ALM346	ADT CU-40 FRONT BACK CABLE	ADT GOVRNT	5537-1
160	ALM347	ADT CU-40 REPLACEMENT	ADT GOVRNT	17002
161	ALM348	ADT CU-40 ADDRESSIBLE LOOP	ADT GOVRNT	5508-1
162	ALM349	ADT CU-40 KEYPAD BACKBOX FOR	ADT GOVRNT	5351-3
163	ALM350	ADT CU-40 CONTROL UNIT	ADT GOVRNT	AL-3
164	ALM365	WELLS FARGO ALARM 360 DEGREE	ADT GOVRNT	EPIC 86
165	ALM370	OMNI PRO II	AES CORPOR	20A00-65-VSP1
166	ALM371	DATA GATHERING PANEL 8 INPUT	AES CORPOR	AL-1205
167	ALM372	8 INPUT MODULE	AES CORPOR	AL-1211
168	ALM373	FIBER OPTICS TO RS-485	AES CORPOR	AL-1743
169	ALM374	OUTPUT CONTROLLER MODULE	HAI HOMEAU	10A07-1
170	ALM375	POINT MODULE RELAY OUTPUT SET	GE SECURIT	AL-1810
171	ALM376	DATA/POWER DISTRIBUTION MODULE	GE SECURIT	AL-1330
172	ALM377	KEYPAD	AES CORPOR	D1260
173	ALM378	MONITOR	AES CORPOR	ECM-12 WO BATT
174	ALM380	CONDUIT BOX FOR ALM377 KEYPAD	BOSCH	D56
175	ALM381	TWO PT INPUT MOD; P/N 6852	AES CORPOR	ALM381
176	ALM382	COMMON ALARM INTERFACE	AES CORPOR	ALM382
177	ALM383	SURGE PRTCTR, IN-LINE, FUSED	B&B ELECTR	485FPP
178	ALM446	SWITCH HARDWIRE HOLD UP	ADT GOVRNT	269R
179	ALM466	LEARN MODE FLEXGUARD	GE SECURIT	60-834-95
180	ALM470	LEARN MODE, WATER RESISTANT	GE SECURIT	60-578-10-95
181	ALM474	DETECTOR PIR REQUEST TO EXIT	BOSCH	DS160
182	ALM500	ALARM CONTROLLER ( USE FOR	GE SECURIT	60-650-95
183	ALM501	TOUCHPAD VFD 2-LINE FOR ALM500	GE SECURIT	60-804-03
184	ALM502	REMOTE PANIC BUTTON FOR USE	GE SECURIT	60-452-10-319.5
185	ALM503	PANIC BUTTON HOLDER FOR ALM502	GE SECURIT	13-161
186	ALM504	REPEATER QUICK BRIDGE FOR	GE SECURIT	80-922-1
187	ALM505	TRANSMITTER 1W FOR ALM504	GE SECURIT	L60-642-01-95
188	ALM525	ITI ADVENT ALARM CONTROLLER	GE SECURIT	60-562-01
189	ALM526	ITI ADVENT PRINTER INTERFACE	GE SECURIT	60-783
190	ALM527	ITI ADVENT 2 LINE ALPHANUMERIC	GE SECURIT	60-804-01
191	ALM528	ITI ADVENT 8 ZONE INPUT	GE SECURIT	60-774
192	ALM529	ITI ADVENT HARDWIRED INTERIOR	GE SECURIT	60-252
193	ALM530	ITI ADVENT 4 RELAY OUTPUT	GE SECURIT	60-770
194	ALM531	ITI ADVENT 8 ZONE INPUT SNAP	GE SECURIT	60-757
195	ALM532	ITI ADVENT RELAY EXPANSION	GE SECURIT	60-758
196	ALM534	PARALLEL AUTOSWITCH 4 PORT US	BURGESS CD	AS8144B
197	ALM538	ITI SUPERBUS 2000 NEAR	GE SECURIT	60-892
198	ALM539	ITI SUPERBUS 2000 FAR	GE SECURIT	60-893
199	ALM540	ITI ADVENT ALARM	GE SECURIT	60-894
200	ALM541	CIRCUIT BOARD ITI ADVENT	GE SECURIT	60-888
201	ALM550	PROTECTOR CONTROL UNIT	CINCH SYST	PCU-IDS
202	ALM551	CONTROL BOARD REPLACEMENT	CINCH SYST	RC-P-CPU
203	ALM552	CONTROL BOARD & PWR SPLY REPL	CINCH SYST	AR-PCU-IDS
204	ALM553	CINCH-ON CINCH STICK UNIVERSAL	CINCH SYST	CO-CSU
205	ALM554	TEST BOARD CINCH-ON PRO TESTER	CINCH SYST	CO-T-P
206	ALM555	ENCRYPTED RECEIVER W/ PWR SPLY	CINCH SYST	CEAESRIDSKITSTA
207	ALM556	LABEL, FRONT	CINCH SYST	RC-CEERL-IDS
208	ALM557	TOUCH SCREEN	CINCH SYST	RC-TS-AESR-IDS
209	ALM558	RECEIVER BACKPLANE	CINCH SYST	RC-RB-IDS
210	ALM559	POWER SUPPLY	CINCH SYST	RC-PM-12
211	ALM560	CELAN REMOTE POWER MODULE	CINCH SYST	RC-CE-RP
212	ALM561	CELAN TOUCH SCREEN PROTECTOR	CINCH SYST	CE-TS-STATE
213	ALM562	CELAN ENCRYPTED TOUCH SCREEN	CINCH SYST	RC-CETSL
214	ALM563	CINCH-ON PS-2	CINCH SYST	CO-PS2KI
215	ALM564	TOUCH SCREEN	CINCH SYST	RC-TS-STATE
216	ALM565	CELAN REMOTE POWER MODULE	CINCH SYST	CE-RP
217	ALM566	CINCH-ON CELAN	CINCH SYST	CO-T-RP
218	ALM567	CELAN 4 RELAY OUTPUT MODULE	CINCH SYST	CE-4RO
219	ALM568	CINCH-ON CELAN	CINCH SYST	CO-T-4R
220	ALM569	CELAN 2 ZONE INPUT MODULE	CINCH SYST	CE-2ZI
221	ALM570	CELAN 8 ZONE INPUT MODULE	CINCH SYST	CE-8ZI
222	ALM571	CINCH-ON CELAN	CINCH SYST	CO-T-8Z
223	ALM572	CELAN EXPANSION MODULE	CINCH SYST	CE-EX
224	ALM573	CELAN WF 2 ZONE INPUT MODULE	CINCH SYST	CE-WF2ZI
225	ALM574	TRANSFORMER	CINCH SYST	ACC-T24V-100
226	ALM575	CELAN FIBER CONVERSION	CINCH SYST	CE-FC-N
227	ALM578	CELAN PRINTER MODULE	CINCH SYST	CE-P
228	ALM579	LOCKSET	CINCH SYST	L-S
229	ALM580	PROTECTOR ENCLOSURE	CINCH SYST	E-P-KIT
230	ALM581	PROTECTOR ACCESSORY ENCLOSURE	CINCH SYST	E-PA-KIT
231	ALM582	CELAN 24 ZONE INPUT MODULE	CINCH SYST	CE-24ZI
232	ALM583	PIR, W/ ANTI-MASK	CINCH SYST	CE-DS308
233	ALM584	PIR, STAND ALONE	CINCH SYST	CE-DS938Z
234	ALM585	ALARM, MAGNETIC PANIC SWITCH	CINCH SYST	CE-GES3045
235	ALM586	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-DS308-BO
236	ALM587	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-DS938Z-BO
237	ALM588	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-GES3045-BO
238	ALM589	PROTECTOR ENCLOSURE FOR EXPAND	CINCH SYST	E-PA-S-KIT
239	ALM590	POWER SUPPLY RETROFIT KIT	CINCH SYST	UGKITCEAESRIDS
240	ALM650	ALARM PUSHBUTTON EMERGENCY	SECO-LARM	SS-075Q
241	ALM700	DIGIPLEX NE96 CONTROL PANEL	PARADOX	DGP-NE96
242	ALM701	INTERLOGIX CONTROL PANEL	GE SECURIT	60-865
243	ALM702	LCD KEYPAD FOR ALM700	PARADOX	DGP2-641BL
244	ALM703	POWER SUPPLY MODULE FOR ALM700	PARADOX	DGP2-PS17
245	ALM704	PRINTER MODULE FOR ALM700	PARADOX	APR3-PRT1
246	ALM705	HANDHELD MEMORY KEY FOR ALM700	PARADOX	PMC-3
247	ALM706	4 ZONE HARDWIRE MODULE FOR	PARADOX	APR3-ZX4
248	ALM707	1 ZONE HARDWIRE MODULE FOR	PARADOX	DGP2-ZX1
249	ALM711	DIRECT CONNECT INTERFACE FOR	PARADOX	306USB
250	ALM725	CCTV CAMERA WITH PIR	VIDEO DOMA	D-CAM 800 BW/E
251	ALM861	I-STAR PRO ALARM PANEL	ADT GOVRNT	STAR016W-64A
252	ALM862	INPUT BOARD 8 INPUTS	ADT GOVRNT	AS0073-000
253	ALM863	OUTPUT BOARD O/8 ( 8 OUTPUT)	ADT GOVRNT	AS0074-000
254	ALM864	GCM II 64MB KIT USE WITH	ADT GOVRNT	STARGC-64MBA
255	ALM865	ACM II WITH RELAYS KIT USE	ADT GOVRNT	STARACM8-WA
256	ALM866	CONTROLER POWER SUPPLY USE	ADT GOVRNT	STAR-PS
257	ALM867	512MB PC133 DIMM CL2	CRUCIAL TE	CT64M64S4D75
258	ALM926	CONNECTOR FIBER OPTIC CRIMP ON	TYCO/AMP	5504001-1
259	ALM930	FIBER SENSYS POWER SUPPLY	ALTRONIX	AL400ULX
260	AMW177	MOUNT BRACKET WALL WITH PIVOT	SOUTHWEST	MB-62
261	AMW185	TESTER FOR MICROWAVE INTRUSION	SOUTHWEST	RM82
262	AMW200	PROTECH PIRIMID	PROTECH PR	SDI-77XL-C-HSJB
263	AMW205	PROTECH PIRIMID	PROTECH PR	SDI-76XL-HSJB
264	B5301UE-1000	18-3C STR BC PP PVC JKT GRY	BELDEN	5301UE 0081000
265	B5301UE-500	18-3C STR BC PP PVC JKT GRY	BELDEN	5301UE 008500
266	B6302FE-U1000	18-4C STR BC FLAMARREST	BELDEN	6302FE 877U1000
267	B6302FE-U500	18-4C STR BC FLAMARREST FOIL	BELDEN	6302FE 877U500
268	B82760	18-1P STR TNC FEP FOIL SHD	BELDEN	82760 8775000
269	B82842	24-2P STR TNC FFEP FOIL + TNC	BELDEN	82842 8775000
270	B83264	M17/94-RG179 30 STR SCCS TFE	BELDEN	83264 0011000
271	B8442-1000	22-1P STR TNC PVC PVC JKT CMG	BELDEN	8442 0601000
272	B8618	16-3C STR TNC PE FOIL SHD	BELDEN	8618 0601000
273	B8690-1000	18-3P STR TNC PVC PVC JKT CMG	BELDEN	8690 0601000
274	B8718	12-1P STR TNC PE FOIL SHD	BELDEN	8718 0602000
275	B8749	22-15P STR TNC PVC PVC JKT	BELDEN	8749 0601000
276	B8760	18-1P STR TNC PE FOIL SHD PVC	BELDEN	8760 06010000
277	B8760-1000	18-1P STR TNC PE FOIL SHD PVC	BELDEN	8760 0601000
278	B8760-2000	18-1P STR TNC PE FOIL SHD	BELDEN	8760 0602000
279	B8770-1000	18-3C STR TNC PE FOIL SHD PVC	BELDEN	8770 0601000
280	B9156-1000	18-2P STR TNC PVC PVC JKT CM	BELDEN	9156 0601000
281	B9626	18-25C STR TNC PVC PVC JKT	BELDEN	9626 0601000
282	B9740-1000	18-1P STR TNC PVC PVC JKT CMG	BELDEN	9740 0601000
283	B9745	22-3P STR TNC PVC PVC JKT CMG	BELDEN	9745 0601000
284	B9746-1000	22-4P STR TNC PVC PVC JKT CMG	BELDEN	9746 0601000
285	BAT001	INTELLIGENT BATTERY TESTER 12V	NEWARK ELE	GOLD-IBT
286	BAT002	ACT INTELLIGENT BATTERY TESTER	DOS SECURI	GOLD-PLUS
287	BAT126	BATTERY 12V 24W 6.4AH USE -4	CSB BATTER	HR 1224W F2
288	BAT128	BATTERY 12V 33AH USE FOR	ENERSYS	NP33-12B
289	BAT129	BATTERY 12V 75AH USE FOR	BATTERY US	UPS12-300MR
290	BAT130	BATTERY 12 VDC 100 AH	ALLIED ELE	621-9000
291	BAT135	BATTERY 12V 18 AH USE -2 FOR	ALLIED ELE	PS-12180F2
292	BAT136	BATTERY 12V 18 AH BOLT ON	ALLIED ELE	PS-12180-NB
293	BAT144	BATTERY PACK REPLACEMENT FOR	AMER PWR	SUA24XLBP
294	BAT145	BATTERY 12V 5AH	ENERSYS	NP5-12
295	BAT148	BATTERY 12V 12AH USE(2)FOR	ENERSYS	NP12-12
296	BAT150	BATTERY WIRE KIT(TO INSTALL	AES CORPOR	BAT150
297	BAT151	BATTERY WIRE KIT	AES CORPOR	BAT151
298	BAT152	BATTERY WIRE KIT	AES CORPOR	BAT152
299	BAT158	BATTERY 12V 1.2AH USE -2 FOR	ALLIED ELE	621-0402
300	BAT164	BATTERY 6V 7AH	ENERSYS	NP7-6
301	BAT166	DELL BATTERY MODULE FOR D600	DELL COMPU	C1295
302	BAT176	BATTERY 12V 7AH FOR PWR111/900	ENERSYS	NP7-12
303	BAT183	RECHARGEABLE BATTERY 1.2V NIMH	DIGIKEY	N703-ND
304	BAT198	BATTERY 6V 1.2AH USE FOR	ENERSYS	NP1.2-6
305	BAT201	BATTERY 12V 3.4 AH FOR	ALLIED ELE	PS1230
306	BAT215	BATTERY 6V 6.5AH	ADT GOVRNT	4673-1
307	BAT225	BATTERY 3.6 V LITHIUM FOR ITI	ALLIED ELE	710-8004
308	BAT600	BATTERY 6V LITHIUM PHOTO/	ALLIED ELE	PX28L
309	BAT605	LITHIUM-ION BATTERY REPLACEMNT	INOVONICS	BAT850
310	BAT606	CR2 LITHIUM BATTERY 3VDC	INOVONICS	BAT608
311	BAT607	PANASONIC CR2450 BATTERY	ALLIED ELE	884-0016
312	BAT803	BATTERY 3V LITHIUM	ALLIED ELE	DL123AB
313	BAT804	PANASONIC BATTERY, VANAD/PENT	ALLIED ELE	VL2330-1HF
314	BAT810	3 V 220 MAH LITHIUM CMOS	ALLIED ELE	CR2032
315	BAT811	DIGI*TRAC MEMORY BATTERY	HIRSCH ELE	MPB1
316	BOR126	LOCKMASTERS BOROSCOPE	LOCKMASTER	LKM1042BSK
317	BOR130	BOROSCOPE HAWKEYE P/N HS07-AF	LOCKMASTER	LKM1202C
318	CAM400	CAMERA	DOS AMAZON	A495
319	CAM401	AC POWER SUPPLY FOR CANON	BURGESS CD	7640A001AA
320	CAM402	TRIPOD CAMERA SUNPACK 6601 UT	ADORAMA CA	6601UT
321	CAM564	PORTABLE BATTERY CHARGER	SONY	BC-VM50
322	CAM570	MAVICA DIGITAL CAMERA CD MEDIA	SONY	MVC-CD350
323	CAM580	CAMERA SONY MAVICA FD 200	SONY	FD 200
324	CAM581	CAMERA BAG	BURGESS CD	LCSX20
325	CBL050	CABLE W/ CONNECTOR 5FT FOR	BOSCH	VMD-5CABLE
326	CBL140	BELKIN PATCH CABLE CAT 6	BELKIN	A3L9002-07-BLKS
327	CBL146	120/200 120V AC POWER CABLE	RAPISCAN S	3058291
328	CBL175	CABLE UPS POWER ADAPTER CAT.	IBM	5251-012
329	CBL176	USB CABLE	BURGESS CD	F3U133-06
330	CBL177	USB EXTENSION CORD	TRIPP LITE	U026-016
331	CBL178	CABLE SERIAL MODEM DB9 FEMALE/	BURGESS CD	P404-006
332	CBL179	CABLE 3 FT CROSSOVER CAT5E	BURGESS CD	A3X126-03RED-YB
333	CBL180	BELKIN 650MHZ CERT CAT6, 3FT	BELKIN	A3L9002-03-BLKS
334	CBL181	BELKIN 650MHZ CERT CAT6, 14FT	BELKIN	A3L9002-14-BLKS
335	CBL300	CABLE PRINTER FOR HSAS SYSTEM	AES CORPOR	CBL300
336	CBL425	CABLE, USB TO DB9 MALE	BURGESS CD	USA-19HS
337	CBL426	DB9(F-F) NULL MODEM CABLE 6FT	BURGESS CD	P450-006
338	CBL489	CABLE 3 FOOT BNC	COMPU-LINK	R59U-BMBM-3FT
339	CBL490	CABLE 3 FOOT BNC	COMPU-LINK	R179-BMBM-3FT
340	CBL491	CABLE 6 FOOT BNC	COMPU-LINK	R179-BMBM-6FT
341	CBL492	CABLE 10 FOOT BNC	COMPU-LINK	R179-BMBM-10FT
342	CBL496	RS232 CABLE DB25 MALE TO MALE	BTX TECHNO	EP006D84
343	CBL498	CABLE 6 FOOT RCA FOR VCR TO	BTX TECHNO	YV-87RR6
344	CBL499	CABLE 6 FOOT BNC INTECONNECTI	BTX TECHNO	YV-84BB6
345	CMP-00423GS6-6RB-01	23-4P UTP-CMP SOL BC CAT6	GEN CABLE	7131841
346	CMP-00424BEL-5U-06	24-4P UTP-CMP SOL BC CAT5E	BELDEN/CDT	1585A D15U1000
347	CMP-00424HIT-5EU-06	24-4P UTP-CMP SOL BC CAT5E	HITACHI CA	39419-8-BL-2
348	CMP-00424HIT-6U-06	24-4P UTP-CMP SOL BC CAT 5E	HITACHI CA	38891-8-BL2
349	COM006	KENSINGTON MOUSE K72358US	BURGESS CD	72123
350	COM009	HP COMPUTER DC5800 E5300 2.6GH	BURGESS CD	NV462UT+AH053AA
351	COM011	HP 1GB MEM EXPNSION FOR COM008	BURGESS CD	GH739UT
352	COM012	HP 1GB MEMORY EXPANSION FOR	BURGESS CD	AH058AT
353	COM013	HP Z400 COMP, XEON W3520 2.66G	BURGESS CD	FM065+1G+2FX580
354	COM014	HP COMPUTER 6000 PRO	BURGESS CD	VS931UT+AT024AA
355	COM055	E6500 LATITUDE, INTEL 2.53GHZ	DELL COMPU	E6500
356	COM056	HARD DRIVE 160GB 9.5MM 5400RPM	DELL COMPU	341-7355
357	COM167	HARD DRIVE 20GBM 9.5MM
358	CON021	PANDUIT WIRE RACEWAY IVORY	PANDUIT	LD5EI6-A
359	CON022	RACEWAY REDUCER REDUCESES	PANDUIT	RF10X5EI-X
360	CON023	RACEWAY COUPLING IVORY USE FOR	PANDUIT	CF10EI-X
361	CON024	PANDUIT RACEWAY COUPLING IVORY	PANDUIT	CF5EI-E
362	CON025	RACEWAY END CAP IVORY USE FOR	PANDUIT	ECF10EI-X
363	CON026	PANDUIT RACEWAY END CAP IVORY	PANDUIT	ECF5EI-E
364	CON027	RACEWAY INSIDE CORNER IVORY F	PANDUIT	ICF10EI-X
365	CON028	PANDUIT RACEWAY INSIDE CORNER	PANDUIT	ICF5EI-E
366	CON029	PANDUIT RACEWAY OUTSIDE CORNER	PANDUIT	OCF10EI-X
367	CON030	PANDUIT RACEWAY OUTSIDE CORNER	PANDUIT	OCF5EI-E
368	CON031	RACEWAY RIGHT ANGLE IVORY FOR	PANDUIT	RAF10EI-X
369	CON032	PANDUIT RACEWAY RIGHT ANGLE	PANDUIT	RAF5EI-E
370	CON033	RACEWAY TEE CONNECTOR IVORY	PANDUIT	TF10EI-X
371	CON034	PANDUIT RACEWAY TEE CONNECTOR	PANDUIT	TF5EI-E
372	CON039	CONDUIT BUSHING 1/2 INCH THRE	GE SUPPLY	ST-10
373	CON040	CONDUIT BUSHING 3/4 INCH TO	REXEL SUMM	EGSRB-2
374	CON041	PANDUIT WIRE RACEWAY IVORY	PANDUIT	LD3EI6-A
375	CON043	CONDUIT BUSHING 1INCH METAL	GE SUPPLY	BU403
376	CON044	T&B CONDBUSHNG 2" INSUL GRNDNG	GE SUPPLY	BG806

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.