Exhibit A Pricing Tables A003.xlsx

XLSX spreadsheet 318 KB Posted Aug 1, 2011

Attached to: Supply Chain Management Services - 100% Full and Open Competition
Solicitation number: SAQMMA11R0186
Issued by: Department of State Office of Acquisition Management

About this file

From the source

Exhibit A Pricing Tables A003

View the file

Other files

File	Type	Posted
Solicitation Supply Chain Management A006.docx	DOCX document	Aug 19, 2011
SF30 Supply Chain Management A006.docx	DOCX document	Aug 19, 2011
Exhibit A Pricing Tables A006.xlsx	XLSX spreadsheet	Aug 19, 2011
SF30 Continuation Page A006.docx	DOCX document	Aug 19, 2011
SF30 Supply Chain Management A005.docx	DOCX document	Aug 18, 2011
Appendix J-1 Projected Workload Table A004.xlsx	XLSX spreadsheet	Aug 11, 2011
SF30 Supply Chain Management A004.docx	DOCX document	Aug 11, 2011
SF30 Continuation Page A004.docx	DOCX document	Aug 11, 2011
Solicitation Supply Chain Management A004.docx	DOCX document	Aug 11, 2011
Exhibit A Pricing Tables A004.xlsx	XLSX spreadsheet	Aug 11, 2011
Solicitation Supply Chain Management A003.docx	DOCX document	Aug 1, 2011
SF30 Supply Chain Management A003.docx	DOCX document	Aug 1, 2011
Exhibit A Pricing Tables A002.xlsx	XLSX spreadsheet	Jul 29, 2011
SF30 Supply Chain Management A002.docx	DOCX document	Jul 29, 2011
Appendix J-1 Projected Workload Table A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Appendix J-2 Quality Assurance Surveillance Plan A002.docx	DOCX document	Jul 29, 2011
Appendix J-10 Product Comparison Template A002.docx	DOCX document	Jul 29, 2011
SF30 Continuation Pages A002.docx	DOCX document	Jul 29, 2011
Solicitation Supply Chain Management A002.docx	DOCX document	Jul 29, 2011
Exhibit H Equipment Repairs A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit B OCONUS Delivery Locations A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit F Past Performance Questionnaire A002.docx	DOCX document	Jul 29, 2011
Exhibit I TDB Test Equipment A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit G Government Stock On-Hand A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Appendix J-16 Security Procedures for Consolidated Receiving Points A002.doc.docx	DOCX document	Jul 29, 2011
Appendix J-17 DD254.pdf	PDF	Jul 29, 2011
Appendix J-18 SCA Wage Determination.pdf	PDF	Jul 29, 2011
Exhibit D Historical Equipment Usage A002.xlsx	XLSX spreadsheet	Jul 29, 2011
Exhibit C CONUS Delivery Locations A002.xlsx	XLSX spreadsheet	Jul 29, 2011
A001 - Change Page.docx	DOCX document	Jul 8, 2011
A001 - SF 30 Supply Chain Management.doc.docx	DOCX document	Jul 8, 2011
Appendix J-15 Technical Bulletin Template.docx	DOCX document	Jul 1, 2011
Appendix J-3 Acronyms and Definitions.docx	DOCX document	Jul 1, 2011
Exhibit B OCONUS Delivery Locations.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-12 Pilot Project Plan Template.docx	DOCX document	Jul 1, 2011
Appendix J-6 Customer Technology Requirement Template.docx	DOCX document	Jul 1, 2011
Appendix J-11 Product Evaluation Template.docx	DOCX document	Jul 1, 2011
Exhibit E Historical Workload Information.docx	DOCX document	Jul 1, 2011
Appendix J-7 Technology Needs Assessment Template.dotx.docx	DOCX document	Jul 1, 2011
Appendix J-16 Security Procedures for Consolidation Receiving Points.doc	DOC document	Jul 1, 2011
Appendix J-13 Deployment Documentation Package.docx	DOCX document	Jul 1, 2011
Appendix J-1 Projected Workload Table.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-5 Equipment and System Types.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-10 Product Comparison Template.docx	DOCX document	Jul 1, 2011
Exhibit C CONUS Delivery Locations.xlsx	XLSX spreadsheet	Jul 1, 2011
Exhibit F Past Performance Questionnaire.docx	DOCX document	Jul 1, 2011
Appendix J-8 Concept of Operations Template.docx	DOCX document	Jul 1, 2011
Appendix J-2 Quality Assurance Surveillance Plan.docx	DOCX document	Jul 1, 2011
Exhibit A - Pricing Tables.xlsx	XLSX spreadsheet	Jul 1, 2011
Appendix J-14 New Product Bulletin Template.docx	DOCX document	Jul 1, 2011

Show 40 more

Latest 50 of 55 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1. Compliance Checklist Pricing Table 1 Price Volume Compliance Checklist

	RFP
Reference	Requirement	Comply
(Yes/No)	Proposal Reference
	L.16.2 (1)	The electronic price proposal shall consist of the following, which are described further in this subsection:

a. Narrative (in Word or PDF)

b. Pricing Tables 1-7 (in one Excel workbook)

c. Detail Pricing Tables (for Pricing Tables 5-7) (in a second Excel workbook)

d. Supporting Information (in Word or PDF)

Offerors shall prepare on a CD-ROM one electronic file for each of the above sections. Therefore, offerors shall prepare four files on each CD-ROM.

L.16.2 (2) The hard-copy price proposal shall consist of the following, which are described further in this subsection:

a. Narrative

b. Pricing Tables 1-7

c. Detail Pricing Tables (for Pricing Tables 5-7)

d. Supporting Information

Offerors shall separate each of the above sections by a distinct tab and divider page.

L.16.2 (3)	The content of the electronic price proposal and hard-copy price proposal shall match. If differences exist between the two proposals and there is insufficient time for reconciliation, the hard-copy proposal shall take precedence.
L.16.2 (4)	Pricing Tables 1-7 are provided by the Government and shall be completed by the offerors. Detail Pricing Tables (for Pricing Tables 5-7) shall be provided by the offerors.
L.16.2 (5)	Offerors shall not alter the existing format or content in Pricing Tables 1-7. Offerors shall complete the required areas only.
L.16.2 (6)	Offerors shall not add or delete cost elements in Pricing Tables 4-7.
L.16.2 (7)	In Pricing Table 1, offerors shall complete the “Comply (Yes/No)” and “Proposal Reference” columns.
L.16.2 (8)	In Pricing Table 2, offerors shall add or delete rows as necessary. The number (e.g., “1)”) in the “Indirect Cost Rate Description” column signifies a specific indirect cost rate description; for example, an offeror may elect to propose “Fringe Benefits” next to “1)”, “Overhead” next to “2)”, and “G&A” next to “3)”.
L.16.2 (9)	In Pricing Table 2, offerors shall propose their most current provisional billing rates. If applicable, these rates should be reflected in the most current indirect cost rate agreement that has been negotiated between the offeror and its cognizant Federal agency official.
L.16.2 (10)	In Pricing Table 2, each row will apply to a different Contractor Fiscal Year Period, which offerors shall identify with month, day, and year in the right-most column. Offerors shall propose a Contractor Fiscal Year Period for each of its fiscal years through the life of the contract. Offerors shall assume that the life of the contract is November 1, 2011 through October 31, 2016.
L.16.2 (11)	In Pricing Table 3, offerors shall add or delete rows as necessary. The number (e.g., “1)”) in the “Indirect Cost Rate Description” column signifies a specific indirect cost rate description. For example, an offeror may elect to propose “Fringe Benefits” next to “1)”, “Overhead” next to “2)”, and “G&A” next to “3)”.
L.16.2 (12)	In Pricing Table 3, each row will apply to a different Contractor Fiscal Year Period, which offerors shall identify with month, day, and year in the right-most column. Offerors shall propose a Contractor Fiscal Year Period for each of its fiscal years through the life of the contract. Offerors shall assume that the life of the contract is November 1, 2011 through October 31, 2016.
L.16.2 (13)	In Pricing Tables 2 and 3, the proposed provisional and ceiling indirect cost rates, respectively, shall include labor costs to handle the functions described in the solicitation for CLINs X004, X005, and X010.
L.16.2 (14)	In Pricing Table 4, offerors shall propose one fee percentage per contract year per cost-plus-fixed-fee CLIN.
L.16.2 (15)	In Pricing Table 4, the proposed fee percentages shall not exceed two decimal places and shall not exceed the 10% statutory limitation identified in FAR 15.404-4(c)(4)(i)(C).
L.16.2 (16)	In Pricing Tables 4-7, offerors shall use for pricing purposes the following period of performance:

Base Year: November 1, 2011 through October 31, 2012 Option Year 1: November 1, 2012 through October 31, 2013 Option Year 2: November 1, 2013 through October 31, 2014 Option Year 3: November 1, 2014 through October 31, 2015 Option Year 4: November 1, 2015 through October 31, 2016

L.16.2 (17)	In Pricing Table 5, offerors shall propose one firm-fixed-unit-price per contract year for each known equipment.
L.16.2 (18)	In Pricing Table 5, each proposed firm-fixed-unit-price shall include only the known equipment costs, applicable indirect costs, and profit. Applicable indirect costs shall include labor costs to handle the functions described in the solicitation for CLIN X003.
L.16.2 (19)	In Pricing Table 5, unless otherwise specified in the Description column, offerors shall assume a quantity of one for each known equipment.
L.16.2 (20)	In Pricing Table 5, the proposed firm-fixed-unit-prices shall not exceed two decimal places and shall be in United States currency.
L.16.2 (21)	In Pricing Table 6, offerors shall propose one fixed fully-loaded hourly labor rate per labor category/sub-CLIN per year, regardless of which entity (offeror, subcontractor offeror, or other) is anticipated to perform the labor category.
L.16.2 (22)	In Pricing Table 6, offerors shall base their proposed fixed fully-loaded hourly labor rates on a normal workweek of 40 hours. A normal workweek is defined in FAR 22.103-1.
L.16.2 (23)	In Pricing Table 6, each proposed fixed fully-loaded hourly labor rate shall consist of a proposed unloaded hourly rate, fringe benefits (if not part of applicable indirect costs), applicable indirect costs, and profit. It shall not consist of any other costs. [Any other costs that are part of the Contractor’s established compensation plan and consistent with FAR Part 31 may be allocated during contract performance under CLIN X010 (Other Supplies). Furthermore, any cost elements included in the proposed and negotiated fixed fully-loaded hourly labor rates shall not be allocated elsewhere under this contract].
L.16.2 (24)	In Pricing Table 6, the proposed fixed fully-loaded hourly labor rates shall not exceed two decimal places and shall be in United States currency.
L.16.2 (25)	In Pricing Table 6, the Government provided formulas to calculate automatically each proposed Subtotal, which is Positions Per Year multiplied by Fixed Rate multiplied by Hours. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (26)	In Pricing Table 6, the Government provided formulas also to calculate automatically the proposed Total and Grand Total prices. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (27)	In Pricing Table 7, offerors shall not enter data in the gray areas. These areas are inapplicable.
L.16.2 (28)	In Pricing Table 7, the Subtotals for CLINs X001, X002, and X006 shall be the respective proposed firm-fixed-prices.
L.16.2 (29)	In Pricing Table 7, the Subtotals for CLINs X001, X002, X006, and X007 shall match the respective proposed firm-fixed-prices in the offeror’s Detail Pricing Table (for Pricing Table 7).
L.16.2 (30)	In Pricing Table 7, the Subtotals for CLIN X003 shall match the respective proposed Subtotals in Pricing Table 5 (Firm-fixed-unit-prices). The Government provided formulas to transfer automatically the respective proposed Subtotals from Pricing Table 5, but offerors shall verify that the Subtotals match and make any necessary corrections.
L.16.2 (31)	In Pricing Table 7, for CLINs X004, X005, X008, and X010, the Ce Rate(s) shall match the respective proposed ceiling indirect cost rate(s) in Pricing Table 3 (Ceiling Indirect Cost Rates). Offerors shall ensure that the proposed ceiling indirect cost rates in Pricing Table 7 are for the contractor fiscal year(s) that coincides with the contract performance year.
L.16.2 (32)	In Pricing Table 7, for CLINs X004, X005, X008, and X010, the offeror shall apply only the indirect cost rate descriptions (e.g., G&A) that are usually allocated to equipment, transportation, direct labor, and services/maintenance agreements, respectively, in accordance with the offeror’s established or disclosed cost accounting practices.
L.16.2 (33)	In Pricing Table 7, the respective RFP Costs for CLINs X004, X005, X008, and X010 are an annual estimate. For each contract year, offerors shall multiply the applicable proposed ceiling indirect cost rate(s) by the RFP Cost, the product of which shall be reflected in the Ind $ column.
L.16.2 (34)	In Pricing Table 7, the Fee % for CLINs X004, X005, and X008 shall match the respective proposed fee percentages in Pricing Table 4 (Fee Percentages). The Government provided formulas to transfer automatically the respective proposed fee percentages from Pricing Table 4, but offerors shall verify that the fee percentages match and make any necessary corrections.
L.16.2 (35)	In Pricing Table 7, for CLINs X004, X005, and X008, the Government provided formulas to calculate automatically each proposed Fixed Fee, which is the Fee % multiplied by the sum of the RFP Cost and Ind $. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (36)	In Pricing Table 7, for CLINs X004, X005, and X008, the Subtotal shall reflect the sum of the RFP Cost, Ind $, and Fixed Fee.
L.16.2 (37)	In Pricing Table 7, the Subtotals for CLIN X009 shall match the respective proposed Totals in Pricing Table 6 (Fixed Labor Rates). The Government provided formulas to transfer automatically the respective proposed Totals from Pricing Table 6, but offerors shall verify that the amounts match and make any necessary corrections.
L.16.2 (38)	In Pricing Table 7, for CLIN X010, the Subtotal shall reflect the sum of the RFP Cost and Ind $.
L.16.2 (39)	In Pricing Table 7, the Government provided formulas to calculate automatically the proposed Subtotal, Total, and Grand Total prices. However, offerors shall verify the arithmetic accuracy and make any necessary corrections.
L.16.2 (40)	In Pricing Table 7, the proposed Subtotal, Total, and Grand Total prices shall be in whole numbers; they shall not contain decimals.
L.16.2 (41)	In Detail Pricing Table (for Pricing Table 5), offerors shall show for each contract year the breakdown of each proposed firm-fixed-unit-price. Proposed indirect cost rate(s) shall include labor costs to handle the known equipment functions described in the solicitation. The breakdown shall consist of at least the following:

a. Each proposed known equipment cost

b. Each proposed indirect cost rate description (e.g., Material Handling, G&A)

c. Each proposed indirect cost rate

d. Each proposed indirect cost

e. Proposed profit percentage

f. Proposed profit dollar amount

g. Subtotal for each known equipment

h. Subtotal for all known equipment

L.16.2 (42)	In Detail Pricing Table (for Pricing Table 5), offerors shall show with formulas the arithmetic process by which they calculated their proposed firm-fixed-unit-prices.
L.16.2 (43)	In Detail Pricing Table (for Pricing Table 6), offerors shall include a crosswalk from each RFP-specified labor category in Pricing Table 6 to the offerors’ internal labor category. If the offeror’s internal labor category matches the RFP-specified labor category, the offeror shall list the name of the labor category in both the RFP-specified Labor Category column and Internal Labor Category column of its crosswalk.
L.16.2 (44)	In Detail Pricing Table (for Pricing Table 6), offerors shall show for each performance year the build-up of each fixed fully-loaded hourly labor rate proposed in Pricing Table 6 (see exception under item 65 below). Offerors shall identify on the build-up schedule:

a. proposed unloaded hourly labor rate

b. each proposed fringe benefits description (if not included in an indirect cost pool)

c. each proposed fringe benefits cost (if not included in an indirect cost pool)

d. each proposed indirect cost rate description (e.g., Overhead, G&A)

e. each proposed indirect cost rate

f. each proposed indirect cost

g. proposed profit percentage

h. proposed profit dollar amount

i. proposed fixed fully-loaded hourly labor rate

L.16.2 (45)	In Detail Pricing Table (for Pricing Table 6), offerors shall show with formulas the arithmetic process by which they calculated their proposed fixed fully-loaded hourly labor rates in Pricing Table 6.
L.16.2 (46)	Offerors shall verify that the proposed fixed fully-loaded hourly labor rates in Pricing Table 6 match the respective proposed fixed fully-loaded hourly labor rates in Detail Pricing Table (for Pricing Table 6).
L.16.2 (47)	In Detail Pricing Table (for Pricing Table 6), offerors shall specify next to each RFP-specified labor category from Pricing Table 6 whether the proposed fixed fully-loaded hourly labor rate applies to labor performed by: 1) the offeror; 2) subcontractor offeror(s); and/or 3) divisions, subsidiaries, or affiliates of the offeror under a common control.
L.16.2 (48)	In Detail Pricing Table (for Pricing Table 7), for CLINs X001, X002, X006, and X007, offerors shall show for each contract year the breakdown of each proposed firm-fixed-price. The breakdown shall consist of at least the following:

Labor

a. Each labor category

b. Number of positions for each labor category

c. Proposed number of hours per position

d. Proposed unloaded hourly labor rate per position

e. Each proposed fringe benefits description (if not included in an indirect cost pool)

f. Each proposed fringe benefits cost (if not included in an indirect cost pool)

g. Each proposed indirect cost rate description (e.g., Overhead)

h. Each proposed indirect cost rate

i. Each proposed indirect cost

j. Proposed profit percentage

k. Proposed profit dollar amount

l. Subtotal for each labor category

m. Subtotal for Labor (sum of subtotals for all labor categories)

Non-labor

a. Each proposed cost element

b. Proposed unit cost per cost element

c. Proposed unit of measurement per cost element

d. Proposed quantity per cost element

e. Each proposed indirect cost rate description (e.g., G&A)

f. Each proposed indirect cost rate

g. Each proposed indirect cost

h. Proposed profit percentage

i. Proposed profit dollar amount

j. Subtotal for each cost element

k. Subtotal for Non-labor (sum of subtotals for all cost elements)

Labor and Non-labor

a. Proposed firm-fixed-price (sum of subtotals for Labor and Non-labor)

	L.16.2 (48)
(continued)	f. Each proposed indirect cost rate

g. Each proposed indirect cost

h. Proposed profit percentage

i. Proposed profit dollar amount

j. Subtotal for each cost element

k. Subtotal for Non-labor (sum of subtotals for all cost elements)

Labor and Non-labor

a. Proposed firm-fixed-price (sum of subtotals for Labor and Non-labor)

L.16.2 (49)	(49) In Pricing Table 7 and Detail Pricing Table (for Pricing Table 7), for CLINs X001, X002, X006, and X007, offerors shall propose firm-fixed-prices based on a 40-hour normal workweek.
L.16.2 (50)	In Detail Pricing Table (for Pricing Table 6), for CLIN X009, offerors shall identify the hours in excess of an average of 40 hours per week, by labor category at the same level of detail as compensated hours, and the uncompensated overtime rate per hour, whether at the prime or subcontract level, for any proposed hours against which an uncompensated overtime rate is applied [see FAR 52.237-10 (“Identification of Uncompensated Overtime”)]. This includes uncompensated overtime hours that are in indirect cost pools for personnel whose regular hours are normally charged direct.
L.16.2 (51)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall complete all applicable data cells.
L.16.2 (52)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall not hide or lock any rows, columns, or cells that contain proposed data.
L.16.2 (53)	In Pricing Tables 1-7 and Detail Pricing Table (for Pricing Tables 5-7), offerors shall propose all rates, costs, and prices in United States currency.
L.16.2 (54)	In the Narrative, offerors shall identify the basis of estimate of their proposed unloaded hourly labor rates and indirect cost rates that comprise their respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, X007, and X009. The proposed indirect cost rates that comprise the respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, X007, and X009 in Pricing Tables 6 and 7 do not have to match the proposed provisional billing rates in Pricing Table 2 (Provisional Billing Rates) or the proposed ceiling indirect cost rates in Pricing Table 3 (Ceiling Indirect Cost Rates).
L.16.2 (55)	In the Narrative, offerors shall identify the basis of estimate of their proposed indirect cost rate(s) that comprise their proposed firm-fixed-unit-prices for CLIN X003. The proposed indirect cost rates that comprise the proposed firm-fixed-unit-prices for CLIN X003 in Pricing Table 5 do not have to match the proposed provisional billing rates in Pricing Table 2 (Provisional Billing Rates) or the proposed ceiling indirect cost rates in Pricing Table 3 (Ceiling Indirect Cost Rates).
L.16.2 (56)	In the Narrative, offerors shall verify that the proposed labor rates comprising the respective proposed firm-fixed-prices and fixed fully-loaded hourly labor rates for CLINs X001, X002, X006, X007, and X009 are representative of the skill level required and work to be performed under the contract.
L.16.2 (57)	In the Narrative, offerors shall identify the number of hours in their normal workweek.
L.16.2 (58)	In the Narrative, offerors shall identify their proposed subcontractors.
L.16.2 (59)	In the Narrative, for CLINs X004, X005, and X008, offerors shall address the items in FAR 52.215-22 (Limitations on Pass-Through Charges).
L.16.2 (60)	In the Narrative, offerors shall identify the name and full contact information of their cognizant Federal auditor (e.g., local Defense Contract Audit Agency branch).
L.16.2 (61)	In the Narrative, offerors shall identify the name and full contact information of their cognizant Federal agency official (CFAO). The CFAO works in the offeror’s cognizant Federal agency, which is normally the agency with which the offeror has the largest dollars in negotiated contracts, including option periods.
L.16.2 (62)	In the Supporting Information, offerors shall submit evidence to support the proposed provisional billing rates in Pricing Table 2. Examples are a current negotiated indirect cost rate agreement with the offeror’s cognizant Federal agency official or recent (within the last two years) Defense Contract Audit Agency (DCAA) audit report.
L.16.2 (63)	In the Supporting Information, offerors shall include a copy of their policy addressing uncompensated overtime.
L.16.2 (64)	In the Supporting Information, for CLINs X001, X002, X003, X006, X007, and X009, offerors, in accordance with FAR 15.404-3(b) (Subcontract Pricing Considerations), shall conduct appropriate cost or price analyses to establish the reasonableness of proposed subcontract prices, and shall include the results of these analyses. Results shall be in the form of the cost/price analysis report(s), which shall include: cost/price analysis technique(s) used (e.g., comparison of proposed prices received in response to the solicitation), summary findings, detailed findings, and basis for the determination of fair and reasonable proposed subcontract prices. For CLIN X009, “proposed subcontract prices” shall mean “subcontractor offeror’s proposed or negotiated fully-loaded hourly labor rates.”
L.16.2 (65)	At this time, the Government does not require submission of subcontractor offerors’ build-up of their proposed or negotiated fully-loaded hourly labor rates, or breakdown of subcontractor offerors’ proposed or negotiated non-labor prices, but the (prime) offeror shall show on its build-up schedule in Detail Pricing Table (for Pricing Tables 5-7) any applicable indirect costs and profit it applied to the subcontractor offerors’ proposed or negotiated fully-loaded hourly labor rates and non-labor prices.

&"Times New Roman,Regular"&12

2. Provisional Billing Rates

	Pricing Table 2		Proposed Provisional Billing Rates
	Indirect Cost Rate Description (e.g., Fringe Benefits, Overhead, G&A)	Proposed Provisional Billing Rate	Basis of Estimate of Proposed Provisional Billing Rate
(e.g., Negotiated Indirect Cost Rate Agreement with Cognizant FAO)	Allocation Base
(e.g., Direct Labor Dollars, Total Cost Input)	Contractor Fiscal Year Period

(e.g., January 1, 2011 - December 31, 2011) 1)

THE FOLLOWING IS FOR ILLUSTRATION PURPOSES ONLY:

Indirect Cost Rate Description	Proposed Provisional Billing Rate	Basis of Estimate of Proposed Provisional Billing Rate	Allocation Base
Contractor Fiscal Year Period

1) G&A 6.29% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2011 - December 31, 2011 G&A 6.27% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2012 - December 31, 2012 G&A 6.25% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2013 - December 31, 2013 G&A 6.00% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2014 - December 31, 2014 G&A 5.95% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2015 - December 31, 2015 G&A 5.80% December 1, 2010 Forward Pricing Rate Agreement with Cognizant Federal Agency Official Total Cost Input January 1, 2016 - December 31, 2016

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004, X005, and X008) and the CLIN containing the

materials portion (CLIN X010) of the time-and-materials arrangement.

2) The Contractor may recover, if consistent with FAR Part 31 and the Contractor’s established or disclosed cost accounting practices,

allowable indirect costs.

3) Subcontractor indirect cost rates are not incorporated above.

4) The Contractor shall be reimbursed: 1) only the indirect cost rate descriptions identified in the table unless prior written approval

was obtained by the Contractor’s cognizant Federal agency official; and 2) at the negotiated provisional billing rates until revised billing rates or

final indirect cost rates have been established by the Contractor’s cognizant Federal agency official.

5) If any revised billing rate established by the Contractor’s cognizant Federal agency official exceeds this contract’s respective ceiling indirect cost

rate (see Section B.4), the Contractor shall be reimbursed at the contract’s ceiling indirect cost rate.

6) The Contractor shall make no change to its established or disclosed method of classifying or allocating indirect costs without the prior written

approval of the Contractor’s cognizant Federal agency official.

7) The Contractor’s fiscal year period is the period used by the Contractor for cost accounting purposes.

3. Ceiling Indirect Cost Rates Pricing Table 3 Proposed Ceiling Indirect Cost Rates

	Indirect Cost Rate Description (e.g., Fringe Benefits, Overhead, G&A)	Proposed Ceiling Indirect Cost Rate	Basis of Estimate of Proposed Ceiling Indirect Cost Rate
(e.g., Negotiated Indirect Cost Rate Agreement with Cognizant FAO)	Allocation Base
(e.g., Direct Labor Dollars, Total Cost Input)	Contractor Fiscal Year Period

(e.g., January 1, 2011 - December 31, 2011) 1)

THE FOLLOWING IS FOR ILLUSTRATION PURPOSES ONLY:

Indirect Cost Rate Description Proposed Ceiling Indirect Cost Rate Basis of Estimate of Proposed Ceiling Indirect Cost Rate Allocation Base Contractor Fiscal Year Period

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004, X005, and X008) and the CLIN containing

the materials portion (CLIN X010) of the time-and-materials arrangement.

2) The negotiated ceiling indirect cost rates will generally apply when settling the contract’s final indirect costs for each of the Contractor’s

fiscal years in conjunction with the contract’s period of performance.

3) The negotiated ceiling indirect cost rates will be compared to the respective established final indirect cost rates, and the Government

shall pay the lesser of the negotiated ceiling indirect cost rates and the respective established final indirect cost rates.

4) If the Government uses the quick-closeout procedure provided in FAR 52.216-7 (Allowable Cost and Payment), the Government will not pay

indirect cost rates that exceed the respective negotiated ceiling indirect cost rates.

4. Fee Percentages

Pricing Table 4 Proposed Fee Percentages

CLIN Description Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

X004 Sourcing and Procurement, Order Fulfillment, and Staging (unknown equipment/need quotes)

X005 Transportation

X008 Transition: Phase-out not applicable not applicable not applicable not applicable

Notes

1) This table is applicable to the cost-plus-fixed-fee CLINs (contract line item numbers) (CLINs X004, X005, and X008).

2) Offerors shall propose one fee percentage per contract year per CLIN.

3) The proposed fee percentages shall not exceed two decimal places.

4) The proposed fee percentages shall not exceed the statutory limitation of 10.00%.

5. Firm-fixed-unit-prices

Notes
1) Offerors shall propose one firm-fixed-unit-price per contract year for each known equipment.
2) Each proposed firm-fixed-unit-price shall include only the known equipment costs, applicable indirect costs, and profit.
3) Unless otherwise specified in the Description column, offerors shall assume a quantity of one for each known equipment.
4) The proposed firm-fixed-unit-prices shall not exceed two decimal places and shall be in United States currency.
5) The Contractor shall be paid only at the negotiated firm-fixed-unit-prices.
6) The proposed Subtotal prices in row 3026 at the end of this table are being used for price evaluation purposes for award of the contract, but the proposed firm-fixed-unit-prices will be used as
as the awarded firm-fixed-unit-prices (in Section B.6) if award is made without discussions or as the basis of negotiation if award is made with discussions.
7) The Government provided formulas to transfer automatically the proposed Subtotal prices at the end of this table to the respective applicable cells under CLIN X003 in Pricing Table 7.
#	ITEM	DESCRIPTION	MANUFACTURER	MODEL	BASE YEAR PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 1 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 2 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 3 PROPOSED FIRM-FIXED-UNIT-PRICE	OPTION YEAR 4 PROPOSED FIRM-FIXED-UNIT-PRICE
1	ADP115	RJ-12 FEMALE COUPLING USE WITH	GC WALDOM	30-9682
2	ADP117	RJ-45 FEMALE COUPLING STRAIGHT	GC WALDOM	30-9684
3	ADP175	COAXIAL ADAPTER	DIGIKEY	CP-AD515
4	ADP190	ADAPTER	EMERSON NE	27-8110
5	ADP401	COAXIAL ADAPTER KIT 30 PIECE	SPECLZD PR	3000A
6	ALM110	AES ALARM.RELAY OUTPUT BOARD 8	AES CORPOR	RP-50
7	ALM111	ALARM DISTRESS PUSHBUTTON SPST	GE SUPPLY	PB7LBL
8	ALM112	ALARM PUSHBUTTON SPST LIGHTED	GE SUPPLY	PB7LPB
9	ALM113	ALARM DISTRESS PUSHBUTTON SPST	BROAN-NUT	PB-18L
10	ALM116	ALARM MAGNETIC PANIC SWITCH	GE SECURIT	3045-W
11	ALM149	EXTENSION CABLE CONNECTOR	AES CORPOR	6511
12	ALM150	ALARM MONITOR	AES CORPOR	6500-24 WO BATT
13	ALM202	ALARM PWR/INTRFCE PANEL 10	ADT GOVRNT	MR-1
14	ALM205	ALARM POWER/INTERFACE PANEL	ADT GOVRNT	NONE
15	ALM206	ALARM PWR/INTERFACE PANEL 5	ADT GOVRNT	MC-4
16	ALM216	WELLS FARGO ALARM MODULES	ADT GOVRNT	AS-44/MP-44
17	ALM218	WELLS FARGO BLANK PANEL GRAY	ADT GOVRNT	BP-1A
18	ALM226	PREMISE PRINTER KIT FOR ALM340	ANIX KITS	ALM226-A
19	ALM230	WELLS FARGO ALARM COMMON	ADT GOVRNT	1103-3
20	ALM232	AES ALARM MONITOR 8 ZONE	AES CORPOR	6300-8-DST
21	ALM233	ALARM POINT MODULE SXE-2	ADT GOVRNT	EPIC-103
22	ALM235	ALARM MONITOR 8 ZONE RACK	AES CORPOR	6300-8-DSR
23	ALM236	ALARM MONITOR 16 ZONE RACK	AES CORPOR	6300-16-DSR
24	ALM237	ALARM MONITOR 24 ZONE RACK	AES CORPOR	6300-24-DSR
25	ALM241	WELLS FARGO ALARM 360 DEGREE	ADT GOVRNT	EPIC-85
26	ALM254	WELLS FARGO INTERFACE CABLE	ADT GOVRNT	4771-1
27	ALM255	WELLS FARGO TRANSFORMER 120VAC	ADT GOVRNT	4773-1
28	ALM256	WELLS FARGO INSERTION TOOL FOR	ADT GOVRNT	4781-1
29	ALM257	WELLS FARGO SXR-2 PNT MODULE	ADT GOVRNT	EPIC104
30	ALM258	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-90
31	ALM259	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-91
32	ALM262	WELLS FARGO DETECTOR INFRARED	ADT GOVRNT	EPIC-95
33	ALM335	ADT EPIC 103 SURFACE MOUNTING	ADT GOVRNT	EPIC KO-3
34	ALM338	CU-40 REPLACEMENT U-6 EPROM	ADT GOVRNT	17036-1
35	ALM339	CU-40 REPLACEMENT U-7 EPROM	ADT GOVRNT	5659-1
36	ALM340	ADT CONTROL UNIT CU-40 W/	ADT GOVRNT	CU-40
37	ALM341	ADT CU-40 ACTIVITY STORAGE	ADT GOVRNT	ASM-3A
38	ALM342	ADT CU-40 REPLACEMENT	ADT GOVRNT	15313-2
39	ALM343	ADT CU-40 KEYBOARD WITH TAMPER	ADT GOVRNT	5505-5
40	ALM344	ADT CU-40 REPLACEMENT RELAY	ADT GOVRNT	15509-1
41	ALM346	ADT CU-40 FRONT BACK CABLE	ADT GOVRNT	5537-1
42	ALM347	ADT CU-40 REPLACEMENT	ADT GOVRNT	17002
43	ALM348	ADT CU-40 ADDRESSIBLE LOOP	ADT GOVRNT	5508-1
44	ALM349	ADT CU-40 KEYPAD BACKBOX FOR	ADT GOVRNT	5351-3
45	ALM350	ADT CU-40 CONTROL UNIT	ADT GOVRNT	AL-3
46	ALM365	WELLS FARGO ALARM 360 DEGREE	ADT GOVRNT	EPIC 86
47	ALM370	OMNI PRO II	AES CORPOR	20A00-65-VSP1
48	ALM371	DATA GATHERING PANEL 8 INPUT	AES CORPOR	AL-1205
49	ALM372	8 INPUT MODULE	AES CORPOR	AL-1211
50	ALM373	FIBER OPTICS TO RS-485	AES CORPOR	AL-1743
51	ALM374	OUTPUT CONTROLLER MODULE	HAI HOMEAU	10A07-1
52	ALM375	POINT MODULE RELAY OUTPUT SET	GE SECURIT	AL-1810
53	ALM376	DATA/POWER DISTRIBUTION MODULE	GE SECURIT	AL-1330
54	ALM377	KEYPAD	AES CORPOR	D1260
55	ALM378	MONITOR	AES CORPOR	ECM-12 WO BATT
56	ALM380	CONDUIT BOX FOR ALM377 KEYPAD	BOSCH	D56
57	ALM381	TWO PT INPUT MOD; P/N 6852	AES CORPOR	ALM381
58	ALM382	COMMON ALARM INTERFACE	AES CORPOR	ALM382
59	ALM383	SURGE PRTCTR, IN-LINE, FUSED	B&B ELECTR	485FPP
60	ALM446	SWITCH HARDWIRE HOLD UP	ADT GOVRNT	269R
61	ALM466	LEARN MODE FLEXGUARD	GE SECURIT	60-834-95
62	ALM470	LEARN MODE, WATER RESISTANT	GE SECURIT	60-578-10-95
63	ALM474	DETECTOR PIR REQUEST TO EXIT	BOSCH	DS160
64	ALM500	ALARM CONTROLLER ( USE FOR	GE SECURIT	60-650-95
65	ALM501	TOUCHPAD VFD 2-LINE FOR ALM500	GE SECURIT	60-804-03
66	ALM502	REMOTE PANIC BUTTON FOR USE	GE SECURIT	60-452-10-319.5
67	ALM503	PANIC BUTTON HOLDER FOR ALM502	GE SECURIT	13-161
68	ALM504	REPEATER QUICK BRIDGE FOR	GE SECURIT	80-922-1
69	ALM505	TRANSMITTER 1W FOR ALM504	GE SECURIT	L60-642-01-95
70	ALM525	ITI ADVENT ALARM CONTROLLER	GE SECURIT	60-562-01
71	ALM526	ITI ADVENT PRINTER INTERFACE	GE SECURIT	60-783
72	ALM527	ITI ADVENT 2 LINE ALPHANUMERIC	GE SECURIT	60-804-01
73	ALM528	ITI ADVENT 8 ZONE INPUT	GE SECURIT	60-774
74	ALM529	ITI ADVENT HARDWIRED INTERIOR	GE SECURIT	60-252
75	ALM530	ITI ADVENT 4 RELAY OUTPUT	GE SECURIT	60-770
76	ALM531	ITI ADVENT 8 ZONE INPUT SNAP	GE SECURIT	60-757
77	ALM532	ITI ADVENT RELAY EXPANSION	GE SECURIT	60-758
78	ALM534	PARALLEL AUTOSWITCH 4 PORT US	BURGESS CD	AS8144B
79	ALM538	ITI SUPERBUS 2000 NEAR	GE SECURIT	60-892
80	ALM539	ITI SUPERBUS 2000 FAR	GE SECURIT	60-893
81	ALM540	ITI ADVENT ALARM	GE SECURIT	60-894
82	ALM541	CIRCUIT BOARD ITI ADVENT	GE SECURIT	60-888
83	ALM550	PROTECTOR CONTROL UNIT	CINCH SYST	PCU-IDS
84	ALM551	CONTROL BOARD REPLACEMENT	CINCH SYST	RC-P-CPU
85	ALM552	CONTROL BOARD & PWR SPLY REPL	CINCH SYST	AR-PCU-IDS
86	ALM553	CINCH-ON CINCH STICK UNIVERSAL	CINCH SYST	CO-CSU
87	ALM554	TEST BOARD CINCH-ON PRO TESTER	CINCH SYST	CO-T-P
88	ALM555	ENCRYPTED RECEIVER W/ PWR SPLY	CINCH SYST	CEAESRIDSKITSTA
89	ALM556	LABEL, FRONT	CINCH SYST	RC-CEERL-IDS
90	ALM557	TOUCH SCREEN	CINCH SYST	RC-TS-AESR-IDS
91	ALM558	RECEIVER BACKPLANE	CINCH SYST	RC-RB-IDS
92	ALM559	POWER SUPPLY	CINCH SYST	RC-PM-12
93	ALM560	CELAN REMOTE POWER MODULE	CINCH SYST	RC-CE-RP
94	ALM561	CELAN TOUCH SCREEN PROTECTOR	CINCH SYST	CE-TS-STATE
95	ALM562	CELAN ENCRYPTED TOUCH SCREEN	CINCH SYST	RC-CETSL
96	ALM563	CINCH-ON PS-2	CINCH SYST	CO-PS2KI
97	ALM564	TOUCH SCREEN	CINCH SYST	RC-TS-STATE
98	ALM565	CELAN REMOTE POWER MODULE	CINCH SYST	CE-RP
99	ALM566	CINCH-ON CELAN	CINCH SYST	CO-T-RP
100	ALM567	CELAN 4 RELAY OUTPUT MODULE	CINCH SYST	CE-4RO
101	ALM568	CINCH-ON CELAN	CINCH SYST	CO-T-4R
102	ALM569	CELAN 2 ZONE INPUT MODULE	CINCH SYST	CE-2ZI
103	ALM570	CELAN 8 ZONE INPUT MODULE	CINCH SYST	CE-8ZI
104	ALM571	CINCH-ON CELAN	CINCH SYST	CO-T-8Z
105	ALM572	CELAN EXPANSION MODULE	CINCH SYST	CE-EX
106	ALM573	CELAN WF 2 ZONE INPUT MODULE	CINCH SYST	CE-WF2ZI
107	ALM574	TRANSFORMER	CINCH SYST	ACC-T24V-100
108	ALM575	CELAN FIBER CONVERSION	CINCH SYST	CE-FC-N
109	ALM578	CELAN PRINTER MODULE	CINCH SYST	CE-P
110	ALM579	LOCKSET	CINCH SYST	L-S
111	ALM580	PROTECTOR ENCLOSURE	CINCH SYST	E-P-KIT
112	ALM581	PROTECTOR ACCESSORY ENCLOSURE	CINCH SYST	E-PA-KIT
113	ALM582	CELAN 24 ZONE INPUT MODULE	CINCH SYST	CE-24ZI
114	ALM583	PIR, W/ ANTI-MASK	CINCH SYST	CE-DS308
115	ALM584	PIR, STAND ALONE	CINCH SYST	CE-DS938Z
116	ALM585	ALARM, MAGNETIC PANIC SWITCH	CINCH SYST	CE-GES3045
117	ALM586	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-DS308-BO
118	ALM587	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-DS938Z-BO
119	ALM588	CELAN ADDRESSABLE DEVICE	CINCH SYST	CE-GES3045-BO
120	ALM589	PROTECTOR ENCLOSURE FOR EXPAND	CINCH SYST	E-PA-S-KIT
121	ALM590	POWER SUPPLY RETROFIT KIT	CINCH SYST	UGKITCEAESRIDS
122	ALM650	ALARM PUSHBUTTON EMERGENCY	SECO-LARM	SS-075Q
123	ALM700	DIGIPLEX NE96 CONTROL PANEL	PARADOX	DGP-NE96
124	ALM701	INTERLOGIX CONTROL PANEL	GE SECURIT	60-865
125	ALM702	LCD KEYPAD FOR ALM700	PARADOX	DGP2-641BL
126	ALM703	POWER SUPPLY MODULE FOR ALM700	PARADOX	DGP2-PS17
127	ALM704	PRINTER MODULE FOR ALM700	PARADOX	APR3-PRT1
128	ALM705	HANDHELD MEMORY KEY FOR ALM700	PARADOX	PMC-3
129	ALM706	4 ZONE HARDWIRE MODULE FOR	PARADOX	APR3-ZX4
130	ALM707	1 ZONE HARDWIRE MODULE FOR	PARADOX	DGP2-ZX1
131	ALM711	DIRECT CONNECT INTERFACE FOR	PARADOX	306USB
132	ALM725	CCTV CAMERA WITH PIR	VIDEO DOMA	D-CAM 800 BW/E
133	ALM861	I-STAR PRO ALARM PANEL	ADT GOVRNT	STAR016W-64A
134	ALM862	INPUT BOARD 8 INPUTS	ADT GOVRNT	AS0073-000
135	ALM863	OUTPUT BOARD O/8 ( 8 OUTPUT)	ADT GOVRNT	AS0074-000
136	ALM864	GCM II 64MB KIT USE WITH	ADT GOVRNT	STARGC-64MBA
137	ALM865	ACM II WITH RELAYS KIT USE	ADT GOVRNT	STARACM8-WA
138	ALM866	CONTROLER POWER SUPPLY USE	ADT GOVRNT	STAR-PS
139	ALM867	512MB PC133 DIMM CL2	CRUCIAL TE	CT64M64S4D75
140	ALM926	CONNECTOR FIBER OPTIC CRIMP ON	TYCO/AMP	5504001-1
141	ALM930	FIBER SENSYS POWER SUPPLY	ALTRONIX	AL400ULX
142	AMW177	MOUNT BRACKET WALL WITH PIVOT	SOUTHWEST	MB-62
143	AMW185	TESTER FOR MICROWAVE INTRUSION	SOUTHWEST	RM82
144	AMW200	PROTECH PIRIMID	PROTECH PR	SDI-77XL-C-HSJB
145	AMW205	PROTECH PIRIMID	PROTECH PR	SDI-76XL-HSJB
146	BAT001	INTELLIGENT BATTERY TESTER 12V	NEWARK ELE	GOLD-IBT
147	BAT002	ACT INTELLIGENT BATTERY TESTER	DOS SECURI	GOLD-PLUS
148	BAT126	BATTERY 12V 24W 6.4AH USE -4	CSB BATTER	HR 1224W F2
149	BAT128	BATTERY 12V 33AH USE FOR	ENERSYS	NP33-12B
150	BAT129	BATTERY 12V 75AH USE FOR	BATTERY US	UPS12-300MR
151	BAT130	BATTERY 12 VDC 100 AH	ALLIED ELE	621-9000
152	BAT135	BATTERY 12V 18 AH USE -2 FOR	ALLIED ELE	PS-12180F2
153	BAT136	BATTERY 12V 18 AH BOLT ON	ALLIED ELE	PS-12180-NB
154	BAT144	BATTERY PACK REPLACEMENT FOR	AMER PWR	SUA24XLBP
155	BAT145	BATTERY 12V 5AH	ENERSYS	NP5-12
156	BAT148	BATTERY 12V 12AH USE(2)FOR	ENERSYS	NP12-12
157	BAT150	BATTERY WIRE KIT(TO INSTALL	AES CORPOR	BAT150
158	BAT151	BATTERY WIRE KIT	AES CORPOR	BAT151
159	BAT152	BATTERY WIRE KIT	AES CORPOR	BAT152
160	BAT158	BATTERY 12V 1.2AH USE -2 FOR	ALLIED ELE	621-0402
161	BAT164	BATTERY 6V 7AH	ENERSYS	NP7-6
162	BAT166	DELL BATTERY MODULE FOR D600	DELL COMPU	C1295
163	BAT176	BATTERY 12V 7AH FOR PWR111/900	ENERSYS	NP7-12
164	BAT183	RECHARGEABLE BATTERY 1.2V NIMH	DIGIKEY	N703-ND
165	BAT198	BATTERY 6V 1.2AH USE FOR	ENERSYS	NP1.2-6
166	BAT201	BATTERY 12V 3.4 AH FOR	ALLIED ELE	PS1230
167	BAT215	BATTERY 6V 6.5AH	ADT GOVRNT	4673-1
168	BAT225	BATTERY 3.6 V LITHIUM FOR ITI	ALLIED ELE	710-8004
169	BAT600	BATTERY 6V LITHIUM PHOTO/	ALLIED ELE	PX28L
170	BAT605	LITHIUM-ION BATTERY REPLACEMNT	INOVONICS	BAT850
171	BAT606	CR2 LITHIUM BATTERY 3VDC	INOVONICS	BAT608
172	BAT607	PANASONIC CR2450 BATTERY	ALLIED ELE	884-0016
173	BAT803	BATTERY 3V LITHIUM	ALLIED ELE	DL123AB
174	BAT804	PANASONIC BATTERY, VANAD/PENT	ALLIED ELE	VL2330-1HF
175	BAT810	3 V 220 MAH LITHIUM CMOS	ALLIED ELE	CR2032
176	BAT811	DIGI*TRAC MEMORY BATTERY	HIRSCH ELE	MPB1
177	BOR126	LOCKMASTERS BOROSCOPE	LOCKMASTER	LKM1042BSK
178	BOR130	BOROSCOPE HAWKEYE P/N HS07-AF	LOCKMASTER	LKM1202C
179	CAM400	CAMERA	DOS AMAZON	A495
180	CAM401	AC POWER SUPPLY FOR CANON	BURGESS CD	7640A001AA
181	CAM402	TRIPOD CAMERA SUNPACK 6601 UT	ADORAMA CA	6601UT
182	CAM564	PORTABLE BATTERY CHARGER	SONY	BC-VM50
183	CAM570	MAVICA DIGITAL CAMERA CD MEDIA	SONY	MVC-CD350
184	CAM580	CAMERA SONY MAVICA FD 200	SONY	FD 200
185	CAM581	CAMERA BAG	BURGESS CD	LCSX20
186	CBL050	CABLE W/ CONNECTOR 5FT FOR	BOSCH	VMD-5CABLE
187	CBL140	BELKIN PATCH CABLE CAT 6	BELKIN	A3L9002-07-BLKS
188	CBL146	120/200 120V AC POWER CABLE	RAPISCAN S	3058291
189	CBL175	CABLE UPS POWER ADAPTER CAT.	IBM	5251-012
190	CBL176	USB CABLE	BURGESS CD	F3U133-06
191	CBL177	USB EXTENSION CORD	TRIPP LITE	U026-016
192	CBL178	CABLE SERIAL MODEM DB9 FEMALE/	BURGESS CD	P404-006
193	CBL179	CABLE 3 FT CROSSOVER CAT5E	BURGESS CD	A3X126-03RED-YB
194	CBL180	BELKIN 650MHZ CERT CAT6, 3FT	BELKIN	A3L9002-03-BLKS
195	CBL181	BELKIN 650MHZ CERT CAT6, 14FT	BELKIN	A3L9002-14-BLKS
196	CBL300	CABLE PRINTER FOR HSAS SYSTEM	AES CORPOR	CBL300
197	CBL425	CABLE, USB TO DB9 MALE	BURGESS CD	USA-19HS
198	CBL426	DB9(F-F) NULL MODEM CABLE 6FT	BURGESS CD	P450-006
199	CBL489	CABLE 3 FOOT BNC	COMPU-LINK	R59U-BMBM-3FT
200	CBL490	CABLE 3 FOOT BNC	COMPU-LINK	R179-BMBM-3FT
201	CBL491	CABLE 6 FOOT BNC	COMPU-LINK	R179-BMBM-6FT
202	CBL492	CABLE 10 FOOT BNC	COMPU-LINK	R179-BMBM-10FT
203	CBL496	RS232 CABLE DB25 MALE TO MALE	BTX TECHNO	EP006D84
204	CBL498	CABLE 6 FOOT RCA FOR VCR TO	BTX TECHNO	YV-87RR6
205	CBL499	CABLE 6 FOOT BNC INTECONNECTI	BTX TECHNO	YV-84BB6
206	COM006	KENSINGTON MOUSE K72358US	BURGESS CD	72123
207	COM009	HP COMPUTER DC5800 E5300 2.6GH	BURGESS CD	NV462UT+AH053AA
208	COM011	HP 1GB MEM EXPNSION FOR COM008	BURGESS CD	GH739UT
209	COM012	HP 1GB MEMORY EXPANSION FOR	BURGESS CD	AH058AT
210	COM013	HP Z400 COMP, XEON W3520 2.66G	BURGESS CD	FM065+1G+2FX580
211	COM014	HP COMPUTER 6000 PRO	BURGESS CD	VS931UT+AT024AA
212	COM055	E6500 LATITUDE, INTEL 2.53GHZ	DELL COMPU	E6500
213	COM056	HARD DRIVE 160GB 9.5MM 5400RPM	DELL COMPU	341-7355
214	COM167	HARD DRIVE 20GBM 9.5MM
215	CON021	PANDUIT WIRE RACEWAY IVORY	PANDUIT	LD5EI6-A
216	CON022	RACEWAY REDUCER REDUCESES	PANDUIT	RF10X5EI-X
217	CON023	RACEWAY COUPLING IVORY USE FOR	PANDUIT	CF10EI-X
218	CON024	PANDUIT RACEWAY COUPLING IVORY	PANDUIT	CF5EI-E
219	CON025	RACEWAY END CAP IVORY USE FOR	PANDUIT	ECF10EI-X
220	CON026	PANDUIT RACEWAY END CAP IVORY	PANDUIT	ECF5EI-E
221	CON027	RACEWAY INSIDE CORNER IVORY F	PANDUIT	ICF10EI-X
222	CON028	PANDUIT RACEWAY INSIDE CORNER	PANDUIT	ICF5EI-E
223	CON029	PANDUIT RACEWAY OUTSIDE CORNER	PANDUIT	OCF10EI-X
224	CON030	PANDUIT RACEWAY OUTSIDE CORNER	PANDUIT	OCF5EI-E
225	CON031	RACEWAY RIGHT ANGLE IVORY FOR	PANDUIT	RAF10EI-X
226	CON032	PANDUIT RACEWAY RIGHT ANGLE	PANDUIT	RAF5EI-E
227	CON033	RACEWAY TEE CONNECTOR IVORY	PANDUIT	TF10EI-X
228	CON034	PANDUIT RACEWAY TEE CONNECTOR	PANDUIT	TF5EI-E
229	CON039	CONDUIT BUSHING 1/2 INCH THRE	GE SUPPLY	ST-10
230	CON040	CONDUIT BUSHING 3/4 INCH TO	REXEL SUMM	EGSRB-2
231	CON041	PANDUIT WIRE RACEWAY IVORY	PANDUIT	LD3EI6-A
232	CON043	CONDUIT BUSHING 1INCH METAL	GE SUPPLY	BU403
233	CON044	T&B CONDBUSHNG 2" INSUL GRNDNG	GE SUPPLY	BG806
234	CON046	CONDUIT REDUCING WASHER 3/4	GE SUPPLY	WA121
235	CON048	GROUNDING BUSHING THREAD INSUL	GE SUPPLY	GIB-100L-4AC
236	CON058	CONDUIT STRAP 1 INCH EMT 1	GE SUPPLY	TS103
237	CON059	CONDUIT STRAP 1/2 INCH RIGID	GE SUPPLY	HS101
238	CON060	CONDUIT STRAP 1/2 INCH EMT OR	GE SUPPLY	HS901
239	CON061	CONDUIT STRAP 3/4 INCH RIGID	GE SUPPLY	HS102
240	CON062	CONDUIT STRAP 1 INCH RIGID 1	GE SUPPLY	HS103
241	CON063	CONDUIT STRAP 1 1/2 INCH EMT	GE SUPPLY	TS105
242	CON064	CONDUIT STRAP 2INCH EMT 1 HOLE	GE SUPPLY	TS106
243	CON066	CONDUIT STRAP 38780 INCH EMT 2	GE SUPPLY	TS902
244	CON067	CONDUIT STRAP 1 1/4INCH EMT 1	GE SUPPLY	TS904
245	CON068	CONDUIT STRAP 1 1/2 INCH EMT	GE SUPPLY	TS905
246	CON069	CONDUIT STRAP 2 INCH EMT 2	GE SUPPLY	TS906
247	CON071	CONDUIT BOX RIGID SINGLE GANG	GE SUPPLY	FSX-1-75
248	CON080	BOX COVER 2 GANG 4" SQUARE	T&B	A400
249	CON085	BOX COVER BLANK OCTAGONAL	GE SUPPLY	54C1
250	CON088	PVC CONDUIT COUPLING THREADED	GE SUPPLY	78002400179
251	CON089	PVC JUNCTION BOX 6INCH X 6INCH	GE SUPPLY	6X6X6 PVC JC BX
252	CON090	PVC JUNCTION BOX 12INCH X	GE SUPPLY	12X12X6 PVC JCT
253	CON092	PVC JUNCTION BOX 12INCH X	GE SUPPLY	12X12X4PVCJCT
254	CON093	PULL BOX 6INCH X 6INCH X 4INCH	HOFFMAN	ASG6X6X4
255	CON094	PULL BOX 10 INCH X 10 INCH X 6	HOFFMAN	A-SG10X10X6
256	CON095	PULL BOX 8 X 8 X 4 WITH SCREW	HOFFMAN	ASE8X8X4
257	CON096	PULL BOX 12 X 12 X 4 WITH	HOFFMAN	ASE12X12X4
258	CON098	PULL BOX 18 X 18 X 4	HOFFMAN	ASE18X18X4
259	CON101	CONDUIT FLEXIBLE METAL 3/4INCH	GE SUPPLY	034 FSC 100FT
260	CON102	CONDUIT FLEXIBLE METAL	GE SUPPLY	034 FSC 50FT
261	CON103	CONDUIT FLEXIBLE METAL 1/2INCH	GE SUPPLY	012FSC 100FT
262	CON109	CONDUIT STRAP, 3 INCH 1 HOLE
263	CON110	CONDUIT 3 INCH FLEXIBLE METAL
264	CON115	WIRE RACEWAY 4INCH X 4INCH X 6	PANDUIT	F4X4LG6N
265	CON116	WIRE RACEWAY END CAP LT. GRAY	PANDUIT	FEC4X4LG
266	CON120	WIRE RACEWAY IVORY ADHESIVE	PANDUIT	LD10EI6
267	CON121	RACEWAY COUPLING IVORY QTY 20	PANDUIT	CF3EI-E
268	CON122	PANDUIT DROP CEILING FITTING	PANDUIT	DCF3EI-X
269	CON123	PANDUIT DROP CEILING FITTING	PANDUIT	DCF5EI-X
270	CON124	PANDUIT DROP CEILING FITTING	PANDUIT	DCF10EI-X
271	CON125	RACEWAY END CAP IVORY USE FOR	PANDUIT	ECF3EI-E
272	CON128	RACEWAY RIGHT ANGLE IVORY FOR	PANDUIT	RAF3EI-E
273	CON129	RACEWAY COVER 4 INCH X 6 FT LT	PANDUIT	C4LG6
274	CON130	RACEWAY REDUCER REDUCES CON120	PANDUIT	RF10X3EI-X
275	CON131	PANDUIT RACEWAY TEE CONNECTOR	PANDUIT	TF3EI-E
276	CON137	RACEWAY REDUCER REDUCES CON021	PANDUIT	RF5X3EI-E
277	CON140	PANDUIT WIRE TROUGH LIGHT GRAY	PANDUIT	F1.5X3LG6
278	CON141	WIRE TROUGH COVER LIGHT GRAY	PANDUIT	C1.5LG6
279	CON145	OUTDOOR WIRE RACEWAY 2 W X 1 H	PANDUIT	FS2X1EI6WR
280	CON146	PANDUIT WIRING DUCT 4INCHH X	PANDUIT	FS4X4LG6
281	CON156	CCHINDS COND OUTLETBODY GASKE	GE SUPPLY	GASK575
282	CON157	CCHINDS CONDUIT OUTLET BODY	GE SUPPLY	T57
283	CON201	BOX CONECTOR FLEX CONDUIT	GE SUPPLY	XC402
284	CON202	CONDUIT STRAP 2" FOR KINDORF	GE SUPPLY	P1117EG
285	CON203	BOX CONNECTOR COMPRESSION	GE SUPPLY	HC402
286	CON208	CONDUIT EMT 3INCH X 10FT	GE SUPPLY	300 EMT
287	CON213	CONDUIT STRAP 3/4INCH EMT 1	GE SUPPLY	TS102
288	CON215	CONDUIT PVC 3/4INCH INSIDE	GE SUPPLY	034 PVC 80
289	CON216	CONDUIT PVC 90 DEGREE ELBOW	GE SUPPLY	034 PVC ELL 90D
290	CON217	CONDUIT PVC 45 DEGREE ELBOW	GE SUPPLY	034PVC EL 45DEG
291	CON218	CONDULET PVC COND OUTLET BODY	GE SUPPLY	78141
292	CON219	SPRING NUT 1/4 INCH FOR	GE SUPPLY	N224-1/4
293	CON260	90' FLAT ELBOW	WIREMOLD	V711
294	CON261	WIREMOLD CONNECTOR 3/4	WIREMOLD	5781A
295	CON262	WIREMOLD CONNECTOR ADJUSTABLE	WIREMOLD	V5786
296	CON263	WIREMOLD BUSHING (SPECIAL	WIREMOLD	V702
297	CON264	WIREMOLD COMBINATION CONNECTOR	WIREMOLD	V5785
298	CON265	WIREMOLD CONNECTION COVER	WIREMOLD	V706
299	CON266	WIREMOLD CORNER BOX (SPECIAL	WIREMOLD	V5719
300	CON267	WIREMOLD ELBOW BOX CONNECTOR	WIREMOLD	V5783
301	CON268	WIREMOLD EXTERNAL ELBOW	WIREMOLD	V718
302	CON269	WIREMOLD EXTRA DEEP BOX	WIREMOLD	V5744
303	CON270	WIREMOLD INTERNAL ELBOW	WIREMOLD	V717
304	CON271	WIREMOLD INTERNAL TWISTED ELB	WIREMOLD	V5711LHA
305	CON272	WIREMOLD INTERNAL TWISTED	WIREMOLD	V5711RHA
306	CON273	WIREMOLD COUPLING (SPECIAL	WIREMOLD	5701
307	CON274	WIREMOLD SUPPORTING CLIP	WIREMOLD	V5703
308	CON275	WIREMOLD MOUNTING STRAP	WIREMOLD	V704
309	CON276	WIREMOLD ONE-PIECE IVORY 10 FT	WIREMOLD	V700
310	CON277	WIREMOLD TEE (SPECIAL ORDER	WIREMOLD	V5715
311	CON278	WIREMOLD DEEP BOX 1 3/4 IN	WIREMOLD	V5748
312	CON279	WIREMOLD FLEXIBLE SECTION	WIREMOLD	V5700F
313	CON280	WIREMOLD SHALLOW BOX 1 3/8	WIREMOLD	V5747-2
314	CON281	2 GANG ALARM DEVICE BOX	WIREMOLD	V5752
315	CON282	2 GANG XTRA DEEP ALARM DVC BOX	WIREMOLD	V5753
316	CON283	ELBOW CONDUIT CONNECTOR	WIREMOLD	V5784
317	CON284	CONNECTOR RCWY TO CONDUIT 3/4"	WIREMOLD	5782A
318	CON285	CONNECTOR 1/2" EMT TO V5700	WIREMOLD	5791
319	CON286	SPECIAL NIPPLE	WIREMOLD	5780
320	CON287	UTILITY BOX SNGL GANG SURF MNT	WIREMOLD	V57242
321	CON289	COMBINATION DEVICE BOX	WIREMOLD	V5745
322	CON290	CONDUIT EMT 1/2INCH X 10 FEET	GE SUPPLY	012 EMT
323	CON291	BOX CONNECTOR 1/2 INCH	GE SUPPLY	TC711A
324	CON292	CONDUIT RIGID 2 INCH X 10 FEET	GE SUPPLY	GAL200
325	CON295	RACEWAY BLANK EXTENSION BOX F	WIREMOLD	V5760
326	CON296	CONNECTING HUB (BOX CONNECTOR)	GE SUPPLY	HUB-100D
327	CON298	CROUSE HINDS CONDUIT HUB 2"	GE SUPPLY	ST-6
328	CON300	CONDUIT EMT 3/4INCH X 10FT	GE SUPPLY	034 EMT
329	CON301	CONDUIT EMT 1INCH X 10FT	GE SUPPLY	100 EMT
330	CON302	CONDUIT EMT 1-1/2INCH X 10FT	GE SUPPLY	112 EMT
331	CON303	CONDUIT EMT 1-1/4INCH X 10FT	GE SUPPLY	114 EMT
332	CON304	CONDUIT EMT 2INCH X 10FT	GE SUPPLY	200 EMT
333	CON306	CONDUIT ENT FLEXIBLE PVC	GE SUPPLY	12007-100
334	CON309	BOX CONNETOR 1/2INCH LIQUID	GE SUPPLY	LT101
335	CON310	BOX CONNECTOR 3/4INCH	GE SUPPLY	TC112A
336	CON311	BOX CONNECTOR 1/2INCH	GE SUPPLY	ST9050
337	CON312	BOX CONNECTOR 3/4 INCH	T&B	TC912SC
338	CON314	BOX CONNECTOR 1INCH	GE SUPPLY	NTC-100
339	CON315	BOX CONNECTOR 3/4INCH CLAMP	GE SUPPLY	806-DC2
340	CON316	BOX CONNECTOR 3/4INCH	GE SUPPLY	ST75
341	CON317	BOX CONNECTOR 3/4INCH 90	GE SUPPLY	NONE
342	CON318	BOX CONNECTOR 1 INCH	GE SUPPLY	ST100
343	CON319	BOX CONNECTOR 1 1/2INCH	GE SUPPLY	TC115A
344	CON321	CONDUIT REDUCING WASHER 1 INCH	GE SUPPLY	WA132
345	CON322	CONDUIT COUPLING 1 1/2INCH CO	GE SUPPLY	TK115A
346	CON323	CONDUIT COUPLING 2INCH	GE SUPPLY	TK116A
347	CON324	BOX CONNECTOR 1 1/4INCH COMPR	GE SUPPLY	TC114A
348	CON325	CONDUIT COUPLING 1/2 INCH PVC	GE SUPPLY	012 PVC ST COUP
349	CON326	CONDUIT REDUCING WASHER 1 1/4	GE SUPPLY	WA143
350	CON328	CONDUIT COUPLING 1INCH	GE SUPPLY	100 RSC COUPL
351	CON329	CONDUIT COUPLING 1" PHENOLIC	GE SUPPLY	ICC-100
352	CON330	CCONDUIT COUPLING 2" PHENOLIC	GE SUPPLY	ICC-200
353	CON331	CONDUIT COUPLING 1 1/2"	GE SUPPLY	ICC-150
354	CON332	CONDUIT COUPLING 1 1/2" PVC	GE SUPPLY	78002400229
355	CON333	CONDUIT COUPLING 4INCH PVC	GE SUPPLY	400 PVC ST COUP
356	CON334	3 PC COUPLING 1" MALLEABLE FE	GE SUPPLY	EC-100
357	CON335	CONDUIT COUPLING 3/4INCH	GE SUPPLY	TK112A
358	CON336	CONDUIT COUPLING 1INCH	GE SUPPLY	TK113A
359	CON337	CONDUIT COUPLING 1-1/4"	GE SUPPLY	NONE
360	CON338	BOX CONNECTOR 2INCH	GE SUPPLY	TC116A
361	CON339	BOX CONNECTOR 3/8 INCH CABLE	GE SUPPLY	650-DC2
362	CON342	BOX CONNECTOR 3/4" SET SCREW	GE SUPPLY	NONE
363	CON343	3 PC COUPLING 2" MALLEABLE FE	GE SUPPLY	EC-200
364	CON344	BOX CONNECTOR 90 DEGREE FOR	GE SUPPLY	801-DC2
365	CON345	BOX CONNECTOR 1/2INCH 90	GE SUPPLY	804-DC2
366	CON346	CORD CONNECTOR STRAIN RELIEF	GE SUPPLY	2525
367	CON348	BOX CONNECTOR 1INCH	GE SUPPLY	TC113A
368	CON351	CONDUIT COUPLING 3/4INCH	GE SUPPLY	ICC75
369	CON352	CONDUIT COUPLING 1INCH FOR PVC	GE SUPPLY	100 PVC ST COUP
370	CON353	CONDUIT COUPLING 3/4INCH FOR	GE SUPPLY	034 PVC ST COUP
371	CON354	CONDUIT ADAPTER 3/4" THREADED	GE SUPPLY	034 PVC FE ADAP
372	CON355	BOX CONNECTOR	T&B	E943E
373	CON356	CONDUIT COUPLING 4" PHENOLIC	GE SUPPLY	ICC-400
374	CON357	BRIDGEPORT BOX CONNECTOR	GE SUPPLY	660-DC2
375	CON358	CONDUIT FLEXIBLE METAL	GE SUPPLY	200FSC 25FT

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.