Attachment B - DRAFT POLAR_STAR _SLEP_ Specification.pdf

USCGC POLAR STAR (WAGB 10) Service Life Extension Project

(SLEP)

SPECIFICATION FOR DRYDOCK REPAIRS AND ALTERATIONS

Developed By: POLAR STAR SLEP IPT Ryan Young, Editor

(Rev 1)

USCGC POLAR STAR (WAGB-400) SLEP

ii (Rev 1)

TABLE OF CONTENTS

Revisions Record .......................................................................................................................................... v Consolidated List of References .................................................................................................................. vi Consolidated List of Government-furnished Property ............................................................................. xxiv Consolidated List of Critical Inspection Items ....................................................................................... xxvii Principal Characteristics .......................................................................................................................... xxix General Requirements WORK ITEM 1: Hull Plating (U/W Body), Inspect WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing WORK ITEM 3: Propulsion Shafting, Strain Gauge and Air Gap Readings (All) WORK ITEM 4: Centerline Propulsion Hub, Remove and Reinstall WORK ITEM 5: Port Propulsion Hub, Remove and Reinstall WORK ITEM 6: Starboard Propulsion Hub, Remove and Reinstall WORK ITEM 7: Centerline Propulsion Shafting, Remove and Reinstall WORK ITEM 8: Port Propulsion Shafting, Remove and Reinstall WORK ITEM 9: Starboard Propulsion Shafting, Remove and Reinstall WORK ITEM 10: Sea Strainers (Hayward) Open, Clean, and Inspect WORK ITEM 11: Sea Valves and Waster Pieces, Overhaul or Renew WORK ITEM 12: Boiler, Biennial Maintenance and Inspection WORK ITEM 13: Rudder And Rudder Stock, Remove and Inspect WORK ITEM 14: Cathodic Protection / Zinc Anodes, Renew WORK ITEM 15: Temporary Fuel Oil Offload and Storage, Drydock WORK ITEM 16: Drydock WORK ITEM 17: Dock and Sea Trial Performance, Support, Provide WORK ITEM 18: Miranda Davit, Annual Inspect WORK ITEM 19: Allied K280-70 Crane, Starboard, Annual Inspect and Repair WORK ITEM 20: Allied K280-70 Crane, Port, Annual Inspect and Repair WORK ITEM 21: Allied TB60-60 Crane, Annual Inspect and Repair WORK ITEM 22: Fuel Oil Purifier (FOP), Overhaul, 4000 Hour WORK ITEM 23: Lube Oil Purifier (LOP), Overhaul, 4000 Hour WORK ITEM 24: Hydraulic Oil Purifier (HOP), Overhaul, 4000 Hour WORK ITEM 25: Propulsion Shaft Seal, Clean, Inspect, and Overhaul WORK ITEM 26: Shaft Handling Equipment, Maintenance and Storage WORK ITEM 27: Elevators, Annual Maintenance and Certification WORK ITEM 28: Dumbwaiter, Annual Maintenance and Certification WORK ITEM 29: Fixed Fire Suppression Systems, Annual Inspection and Certification WORK ITEM 30: Anchor Windlass, Service and Inspect WORK ITEM 31: Voids (Non-Accessible), Internal Surfaces, Preserve WORK ITEM 32: U/W Body, Preserve, 100% WORK ITEM 33: U/W Body, Preserve (Partial) WORK ITEM 34: Stern Tube Interior Surfaces, Preserve 100% WORK ITEM 35: Anchor Chain(s) and Ground Tackle, Inspect and Repair WORK ITEM 36: Lube Oil Purifier (LOP) Overhaul, 8000 Hour WORK ITEM 37: Fuel Oil Purifier (FOP) Overhaul, 8000 Hour WORK ITEM 38: Hydraulic Oil Purifier (HOP) Overhaul, 8000 Hour WORK ITEM 39: Vent Ducts (Galley and Scullery), Commercial Cleaning iii (Rev 1)

WORK ITEM 40: Vent Ducts (Laundry Exhaust), Commercial Cleaning WORK ITEM 41: Evaporators (General), Overhaul WORK ITEM 42: Voids (Accessible), Clean and Inspect WORK ITEM 43: Flight Deck Nets, Overhaul, 5 Year WORK ITEM 44: Sewage Holding Tank(s), Clean and Inspect WORK ITEM 45: Tanks (Potable Water), Clean and Inspect WORK ITEM 46: Potable Water Pneumatic Tank and Hot Water Storage Tank, Clean, Inspect, and Hydrotest WORK ITEM 47: Tanks (Diesel Fuel Oil), Clean and Inspect (2022) WORK ITEM 48: Tanks (Aviation Fuel), Clean and Inspect WORK ITEM 49: Voids (Non-Accessible), Leak Test WORK ITEM 50: Appendages (U/W), Leak Test WORK ITEM 51: Fire Prevention and Protection, Provide WORK ITEM 52: Flex Hose Assemblies, Renew (2021) WORK ITEM 53: Flex Hose Assemblies, Renew (2022) WORK ITEM 54: Flex Hose Assemblies, Renew (2023) WORK ITEM 55: Flex Hose Assemblies, Renew (2024) WORK ITEM 56: Flex Hose Assemblies, Renew (2025) WORK ITEM 57: Distilling Plant Pumps and Motors, Overhaul WORK ITEM 58: Main Reduction Gear (MRG), Maintenance and Inspection WORK ITEM 59: Main Propulsion Motor (MPM), Clean and Inspect WORK ITEM 60: Main Propulsion Generator (MPG), Clean and Inspect WORK ITEM 61: Tanks (Diesel Fuel Oil), Clean and Inspect (2024) WORK ITEM 62: Boiler, Strength and Integrity Inspection WORK ITEM 63: Tanks (Boiler Feedwater), Preserve “100%” WORK ITEM 64: Warping Capstan, Inspect and Repair WORK ITEM 65: Ship Service Diesel Generator Exhaust Stack Uptakes, Commercial Clean WORK ITEM 66: Main Diesel Engine Exhaust Stack Uptakes, Commercial Clean WORK ITEM 67: Boiler Exhaust Stack Uptakes, Commercial Clean WORK ITEM 68: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift WORK ITEM 69: Non-Recurring Engineering (SLEP) WORK ITEM 70: Project Management and Planning, Perform (SLEP) WORK ITEM 71: Weight and Moment, Management (SLEP) WORK ITEM 72: NSWCPD CGMCS Installation, Coordinate (SLEP) WORK ITEM 73: NSWCPD PPD Installation, Coordinate (SLEP) WORK ITEM 74: Sewage System Grey Water Lift Stations, Install (SLEP) WORK ITEM 75: Sewage Retention Tank, Add (SLEP) WORK ITEM 76: Piping, Renewal (SLEP) WORK ITEM 77: Gyro Repeaters, Recapitalize (SLEP) WORK ITEM 78: Boiler, Recapitalize Ancillaries (SLEP) WORK ITEM 79: 1MC Renewal (SLEP) WORK ITEM 80: 6MC, Renew (SLEP) WORK ITEM 81: Ship Service Air Compressors, Recapitalize (SLEP) WORK ITEM 82: Start Air System, Modify (SLEP) WORK ITEM 83: Oily Water Separator, Recapitalize (SLEP) WORK ITEM 84: Fire Pump Manual Bus Transfer, Recapitalize (SLEP) WORK ITEM 85: Dumbwaiter, Recapitalize (SLEP) WORK ITEM 86: Elevators, Upgrade (SLEP) WORK ITEM 87: Small Boat Davit Control Equipment, Relocation (SLEP) iv (Rev 1)

WORK ITEM 88: Commissary Equipment, Recapitalize (SLEP) WORK ITEM 89: Fire Detection System, Recapitalize (SLEP) WORK ITEM 90: 400 Hz System, Modify (SLEP) WORK ITEM 91: False Overhead, Remove (SLEP) WORK ITEM 92: Heating Ventilation and Air Conditioning System, Restore, Zone 1 (SLEP) WORK ITEM 93: Heating Ventilation and Air Conditioning System, Restore, Zone 2 (SLEP) WORK ITEM 94: Heating Ventilation and Air Conditioning System, Restore, Zone 3 (SLEP) WORK ITEM 95: Heating Ventilation and Air Conditioning System, Restore, Zone 4 (SLEP) WORK ITEM 96: Heating Ventilation and Air Conditioning System, Restore, Zone 5 (SLEP) WORK ITEM 97: Heating Ventilation and Air Conditioning System, Restore, Zone 6 (SLEP) WORK ITEM 98: Heating Ventilation and Air Conditioning System, Restore, Zone 7 (SLEP) WORK ITEM 99: Heating Ventilation and Air Conditioning System, Restore, Zone 8 (SLEP) WORK ITEM 100: Heating Ventilation and Air Conditioning System, Restore, Zone 9 (SLEP) WORK ITEM 101: Heating Ventilation and Air Conditioning System, Restore, Zone 10 (SLEP) WORK ITEM 102: Heating Ventilation and Air Conditioning System, Restore, Zone 11 (SLEP) WORK ITEM 103: False Overhead, Recapitalize (SLEP) WORK ITEM 104: Evaporator Salinity Monitoring, Recapitalize (SLEP) WORK ITEM 105: Ancillary Pump and Motor Assemblies, Recapitalize (SLEP) WORK ITEM 106: Flooding Alarms, Recapitalize (SLEP) WORK ITEM 107: Wing Shaft Disconnect Coupling, Recapitalize (SLEP) WORK ITEM 108: Centerline Shaft Disconnect Coupling, Recapitalize (SLEP) WORK ITEM 109: Temporary Services, Contractor Facility, Provide (SLEP) v (Rev 1)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

November

1 Many Replaced citation to 2014 editions of SFLC Standard Specifications to 2018 editions.

November

1 General Requirements

Added definition of “Business Day”

November

1 All Added a “Completion CFR” to every work item

November

1 5, 6, 10 Adjusted paragraph numbering

November

1 11 Minor re-formatting of Table 3

November

1 69 Minor re-formatting of Table 1

November

1 Various Page numbering and Table Of Contents changes collateral to other changes.

NOTE: All work item numbers listed above for a given revision correspond to same numbers in the previous revision.

This revised specification is self-contained with all of the above listed changes incorporated.

vi (Rev 1)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein.

Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast Guard Drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 400 WAGB 101-402, Rev 3, SLEP-Ceiling Replacement Key Plan Coast Guard Drawing 400 WAGB 185-110, Rev -, Centerline CPP Hyd Sys Reservoir Tank

Fabrication Coast Guard Drawing 400 WAGB 185-120, Rev -, Port CPP Hydraulic Reservoir Tank

Fabrication Details Coast Guard Drawing 400 WAGB 185-152, Rev-, Stbd CPP Hyd Sys Reservoir Tank Fabrication Coast Guard Drawing 400 WAGB 433-1, Rev -, Ships Public Announcing, Loudhailer & Ships

Alarm Ckts 1MC and 6MC Elem Wrg Coast Guard Drawing 400 WAGB 433-2, Rev -, General & Intership Announcing System Ckts

1MC & 6MC General Arrangement Coast Guard Drawing 400 WAGB 512-1, Rev -, WAGB POLAR STAR Zone Sys Comp Term

Airflow Test Coast Guard Drawing 400 WAGB 0103-030, Rev C, General Arrangement Modifications

Incidental to Fwd Crane Replacement Coast Guard Drawing 400 WAGB 0103-11, Rev J, Outboard Profile Coast Guard Drawing 400 WAGB 0103-17, Rev A, RIP General Arrangement Of Auxiliary

Machinery Space #3 Coast Guard Drawing 400 WAGB 0103-3, Rev AF, Booklet of General Plans (POLAR STAR) Coast Guard Drawing 400 WAGB 0103-32, Rev D, General Arrangement Modifications

Incidental to Aft Crane Replacements Coast Guard Drawing 400 WAGB 0700-1, Rev L, POLAR STAR Docking Plan Coast Guard Drawing 400 WAGB 1100-1, Rev K, Structural Details & Notes Coast Guard Drawing 400 WAGB 1101-2, Rev R, Shell Plating Fwd Coast Guard Drawing 400 WAGB 1101-3, Rev R; Shell Plating Aft FR 143 1/2 Coast Guard Drawing 400 WAGB 1105-24, Rev J, Elevator Trk Bhd FR 53-57 & FR 105-110 Coast Guard Drawing 400 WAGB 1105-25, Rev. G, Ammo/Tnt Hoist & D.W. Trunk Coast Guard Drawing 400 WAGB 1105-41, Rev D, Flight Dk Modification Coast Guard Drawing 400 WAGB 1105-059, Rev B, Miranda Davit Relocation Installation

General Arrangement and Structural vii (Rev 1)

Coast Guard Drawing 400 WAGB 1106-1, Rev. J, 1ST Platfm Lvl Fwd Coast Guard Drawing 400 WAGB 1106-3, Rev. R, 3RD Deck Plating Fwd Fr 117 ½ Coast Guard Drawing 400 WAGB 1106-4, Rev V, 3rd Deck Plating Aft FR 117 1/2 Coast Guard Drawing 400 WAGB 1107-2, Rev B, Rudder Trunk Coast Guard Drawing 400 WAGB 1108-1, Rev G, Ice Shoe Coast Guard Drawing 400 WAGB 1112-19, Rev AF, Foundations 03 Level & Above Coast Guard Drawing 400 WAGB 1112-61, Rev A, RIP Foundations For New Air Compressors Coast Guard Drawing 400 WAGB 1112‐63, Rev A, RIP‐Foundation Drawing For The Oily

Water Separator System Coast Guard Drawing 400 WAGB 1112-75 Rev -, RIP-Engineers Parts Elevator Structural

Support Mods Coast Guard Drawing 400 WAGB 1112-83, Rev. -, SLEP-Foundations For New Sewage Pumps Coast Guard Drawing 400 WAGB 1202-3, Rev J, Helicopter Safety Net Coast Guard Drawing 400 WAGB 1202-5, Rev -, New Safety Nets for Aft Edge of Flight Deck Coast Guard Drawing 400 WAGB 1205-4, Rev D, Lifting Pads for Rudder & Propellers

Arrangement & Details Coast Guard Drawing 400 WAGB 1205-6, Rev -, Dets of Padeyes for Lifting Gear Coast Guard Drawing 400 WAGB 1500-4, Rev J, Arrg’t JP-5 Piping In Pump Room Coast Guard Drawing 400 WAGB 1602-2, Rev V, Arrangement & Detail Floor Plate Lower

Level Mach’y Spaces Coast Guard Drawing 400 WAGB 1605-1 Rev C, Elevators At Fr 55 & Fr 108 Installation

Details Coast Guard Drawing 400 WAGB 1901-1, Rev AC, Painting Schedule Coast Guard Drawing 400 WAGB 1906-1, Rev K, Zinc Protectors A/D Coast Guard Drawing 400 WAGB 2200-2, Rev D, Rudder Arrg’t & Det Coast Guard Drawing 400 WAGB 2200-4, Rev M, Rudder Stock – Arrangment & Details Coast Guard Drawing 400 WAGB 2200-8, Rev G, Rudder Stock Removal A/D Coast Guard Drawing 400 WAGB 2200-9, Rev K, Arrgt of Steering Gear Rm Coast Guard Drawing 400 WAGB 2200-10, Rev -, Rudder Stock Upper & Lower Bearings Coast Guard Drawing 400 WAGB 2601-1, Rev R, Anchor Handling Arrangement & Details Coast Guard Drawing 400 WAGB 2803‐07, Rev F, Warning, Operating & Instruction Plates Coast Guard Drawing 400 WAGB 2803‐26, Rev ‐, Oily Water Separator Operating Instruction

Placard Coast Guard Drawing 400 WAGB 2803-27 Rev -, Elevators And Dumbwaiter Op Limit Placards Coast Guard Drawing 400 WAGB 2901-2, Rev H, Tank Capacity Curves Coast Guard Drawing 400 WAGB 2901-3, Rev E, Tank Capacity Tables Coast Guard Drawing 400 WAGB 2901-13, Rev C, Intact Trim & Stability Booklet Coast Guard Drawing 400 WAGB 3301-8, Rev S, Joiner Ceiling Layout Pilothouse, 02 & 03

Level Coast Guard Drawing 400 WAGB 3400-3, Rev A, SLEP-Commissary Spaces Arrangement Plans

POLAR STAR

Coast Guard Drawing 400 WAGB 3402-1, Rev E, Commissary Equipment Details Galley Area viii (Rev 1)

Coast Guard Drawing 400 WAGB 3402-2, Rev J, Commissary Equipment Details Main Galley Coast Guard Drawing 400 WAGB 3402-3, Rev H, Commissary Equipt Details Captains Pantry, WR Galley and CPO Cooking Alcove Coast Guard Drawing 400 WAGB 3601-2, Rev. E, Arr. Sewage Treatment Rooms No 1&2 Coast Guard Drawing 400 WAGB 3601-3, Rev. J, Retention Tanks Coast Guard Drawing 400 WAGB 3601-6, Rev C, Sewage Hld Tnk Dk Gear Strrm Aft Bhd Coast Guard Drawing 400 WAGB 3601-7, Rev B, Sewage Hld Tnk Lwr Cargo Hld Aft Bhd Coast Guard Drawing 400 WAGB 3601-9, Rev. A, SLEP Struct. Mods To 3-57-1-F, And 3-57-2-

F To Suit Sewage Retention Upgrade Coast Guard Drawing 400 WAGB 3801-10, Rev J, Vent Arrg Galley & Scullery Mn Dk Coast Guard Drawing 400 WAGB 3801-11, Rev F, Vent Arrg Boiler Space Mn & 2nd Dk 113-

Coast Guard Drawing 400 WAGB 3801-17, Rev K, Vent & AC Arr 3rd Deck FR 143-171

Coast Guard Drawing 400 WAGB 3802-2, Rev AB, Arr. Steam Heat 01 Lvl. & Bel. Fwd 113 Coast Guard Drawing 400 WAGB 3802-3, Rev AF, ARR. STM. HT. 01 LEV. & BE. AFT 113 Coast Guard Drawing 400 WAGB 3802-7, Rev -, Diag Stm Htg & Condensate Coast Guard Drawing 400 WAGB 3803-2, Rev L, Ventilation & A.C. Equipment List Coast Guard Drawing 400 WAGB 3803-3, Rev G, Ventilation and A.C. Fan Fdns Typical Coast Guard Drawing 400 WAGB 3803-4, Rev N, Vent & A/C Fan RM ARR 02 & 03 LEVEL Coast Guard Drawing 400 WAGB 3803-5, Rev M, Vent & A/C Fan Rm Arrg Mn Dk Fr 113

FWD

Coast Guard Drawing 400 WAGB 3803-6, Rev M, Vent & A/C Fan Room Arr MN & 2ND DKS

FR 113 AFT

Coast Guard Drawing 400 WAGB 3803-7, Rev M, Vent & A/C Arr 03 Lev & Abv Coast Guard Drawing 400 WAGB 3803-8, Rev M, Vent & A/C Arr 02 Lev 85 Fwd Coast Guard Drawing 400 WAGB 3803-9, Rev S, Vent & A/C Arrg 01 Lvl Fr 67 Fwd Coast Guard Drawing 400 WAGB 3803-10, Rev M, Vent & A/C Arrgt 01 Lev Fr 67-110 Coast Guard Drawing 400 WAGB 3803-11, Rev Q, Vent & A/C Arr 01 Level Fr 110-148 Coast Guard Drawing 400 WAGB 3803-12, Rev P, Vent & A/C Arr 01 Level 148 Aft Coast Guard Drawing 400 WAGB 3803-13, Rev F, Vent & A/C Arr Mn Dk Fr 25-57 (P) Coast Guard Drawing 400 WAGB 3803-14, Rev H, Vent & A/C Arrg Mn Dk Fr 25-57 (S) Coast Guard Drawing 400 WAGB 3803-15, Rev G, Vent & A/C Arrg Mn Dk Fr 57-85 (P) Coast Guard Drawing 400 WAGB 3803-16, Rev G, Vent & A/C Arr Mn Dk 57-85 (S) Coast Guard Drawing 400 WAGB 3803-17, Rev G, Ventilation & A/C Arrgt Mn Dk Fr 85-113 P Coast Guard Drawing 400 WAGB 3803-18, Rev E, Vent & A/C Arr Mn Dk 85-113 (S) Coast Guard Drawing 400 WAGB 3803-20, Rev L, Vent & A/C Arrg Mn Dk Fr 113-143 Coast Guard Drawing 400 WAGB 3803-21, Rev M, Vent & A/C Arr Mn Dk Fr 143-171 Coast Guard Drawing 400 WAGB 3803-22, Rev M, Ventilation & A/C Arr Mn Dk Fr 171-197 Coast Guard Drawing 400 WAGB 3803-23, Rev G, Vent & A/C Arr Main Deck Aft Of Fr 197 Coast Guard Drawing 400 WAGB 3803-26, Rev F, Vent & A/C Arr 2nd Dk Fr 85-113 P ix (Rev 1)

Coast Guard Drawing 400 WAGB 3803-27, Rev H, Ventilation & A/C Arr 2nd Dk Fr 85-113 S Coast Guard Drawing 400 WAGB 3803-28, Rev E, Vent & A/C Arr 2nd Dk 113-143 Coast Guard Drawing 400 WAGB 3803-29, Rev G, Vent & A/C Arr 2nd Dk Fr 143-182 (S) Coast Guard Drawing 400 WAGB 3803-30, Rev K, Vent & A/C Arr 2nd Dk 143-182 (P) Coast Guard Drawing 400 WAGB 3803-31, Rev L, Vent & A/C Arr 3rd Deck 143-171 (P) Coast Guard Drawing 400 WAGB 3803-32, Rev N, Ventilation & A/C Standard Dets Coast Guard Drawing 400 WAGB 3803-34, Rev E, A.C. Cooling Coil Fdn Typical Coast Guard Drawing 400 WAGB 3803-35, Rev C, Ventilation, A/C, Heating & Cooling Load

Calculations Coast Guard Drawing 400 WAGB 3803-56, Rev. -, SLEP-Ventilation For New Sewage

Treatment Compartments 3-57-1-Q ,and 3-57-2-Q Coast Guard Drawing 400 WAGB 3901-1, Rev Z, Insulation A&D Coast Guard Drawing 400 WAGB 3902-2, Rev E, Piping Insulation Schedule Coast Guard Drawing 400 WAGB 4000-2, Rev F, Machinery and Piping Standard Details Coast Guard Drawing 400 WAGB 4000-3, Rev V, Machinery Arrgt Plan View Lower Level &

List of Mach'y Coast Guard Drawing 400 WAGB 4000-4, Rev R, Machinery Arrgt Plan View Platform Level Coast Guard Drawing 400 WAGB 4000-7, Rev K, Machinery Arrgt Elevation Stbd - Looking

Inbd Coast Guard Drawing 400 WAGB 4000-012, Rev -, SLEP Pump Renewal Key Plan Coast Guard Drawing 400 WAGB 4107-8, Rev D, Diagram Gas Turbine Intake & Exh. and

Boiler Exh. Sys Coast Guard Drawing 400 WAGB 4107-9, Rev H, Arr Water Wash Gas Turb Coast Guard Drawing 400 WAGB 4112-3, Rev L, Propulsion Motor & Generator Interconnection

& IWD

Coast Guard Drawing 400 WAGB 4112-5, Rev AF, Arr S.W. Cool Diesel Gen Coast Guard Drawing 400 WAGB 4112-8, Rev S, Arrangement Compressed Air Diesel Engine

Starting Coast Guard Drawing 400 WAGB 4112-9, Rev G, Diagram Of Engine Starting, Clutch, & G.T.

Fuel Atomizing Air Coast Guard Drawing 400 WAGB 4112-220, Rev A, Rip Arrangement Starting Air System

Modifications – POLAR STAR Coast Guard Drawing 400 WAGB 4112-221, Rev A, RIP Diagram Starting Air System

Modification Coast Guard Drawing 400 WAGB 4200-1, Rev G, A/D Lifting Gear Motor & Gear RMS Coast Guard Drawing 400 WAGB 4301-1, Rev AA, ARRG OF SHAFTING Coast Guard Drawing 400 WAGB 4301-2, Rev F, Bulkhead Seal Arrgt & Details Coast Guard Drawing 400 WAGB 4301-3, Rev J, Shaft Tubes - Arr & Dets C/L & P/S Coast Guard Drawing 400 WAGB 4301-4, Rev 12, Center Tailshaft Coast Guard Drawing 400 WAGB 4301-5, Rev 10, Wing Tailshaft Coast Guard Drawing 400 WAGB 4301-11, Rev 4, Propeller Tailshaft Assy Coast Guard Drawing 400 WAGB 4301-12, Rev 6, Oil Transfer Shaft Assembly x (Rev 1)

Coast Guard Drawing 400 WAGB 4301-13, Rev 3, Outer Oil Pipe Assy (Center Shaft) Coast Guard Drawing 400 WAGB 4301-14, Rev 3, Outer Oil Pipe Assy (Wing Shaft) Coast Guard Drawing 400 WAGB 4301-17, Rev 1, Inner Oil Pipe Assy (Wing Shaft) Coast Guard Drawing 400 WAGB 4301-23, Rev D, Static Shaft Alignment Analysis Coast Guard Drawing 400 WAGB 4301-29, Rev -, Dowel, Propeller Hub To Tailshaft Coast Guard Drawing 400 WAGB 4302-1, Rev P, Stern Tube Bearg & Shaft Seal Arrg Coast Guard Drawing 400 WAGB 4302-4, Rev B, Stern Tube Bearing and Shaft Seals (With

Modified Aft Bearing) Arrgt and Details Coast Guard Drawing 400 WAGB 4400-18, Rev -, Connecting Procedure for Operating Rod and

Oil Tube Coast Guard Drawing 400 WAGB 4400-27, Rev -, CPP Right Hand Hub Assembly (Elev Section

– Side Profile) Coast Guard Drawing 400 WAGB 4400-31, Rev -, CPP Right Hand Operating Rod Coast Guard Drawing 400 WAGB 4400-31, Rev -, CPP Right Hand Operating Rod Coast Guard Drawing 400 WAGB 4400-34, Rev -, CPP 69” Diameter Left Hand Propeller Hub

Assembly (Elev Section) Coast Guard Drawing 400 WAGB 4400-38, Rev -, CPP Left Hand Operating Rod Coast Guard Drawing 400 WAGB 4400-41, Rev -, CPP Hub Cylinder (Common to LH & RH) Coast Guard Drawing 400 WAGB 4400-46, Rev -, CPP Propeller Tailshaft Assembly (Common to LH & RH) Coast Guard Drawing 400 WAGB 4400-69, Rev -, Outer Oil Pipe Detail (Center Shaft) Coast Guard Drawing 400 WAGB 4501‐19, Rev A, RIP Diag Of Sludge Transfer System Coast Guard Drawing 400 WAGB 4501-6, Rev P, Diagram Lubricating Oil Service Transfer &

Pur Sys Coast Guard Drawing 400 WAGB 4501-7, Rev A, Diagram Lubricating Oil Service Transfer

And Purification System Coast Guard Drawing 400 WAGB 4800-10, Rev U, Arr Hyd Interconnecting Piping Fwd Fr 150 Coast Guard Drawing 400 WAGB 4801‐01, Rev H, Operating Gear Bilge & Ballast Coast Guard Drawing 400 WAGB 4801‐07, Rev AH, Arr Bilge Piping Fwd. Fr. 113 Coast Guard Drawing 400 WAGB 4801‐08, Rev AK, Arr. Bilge Piping Aft. Fr. 113 Coast Guard Drawing 400 WAGB 4801‐09, Rev U, Diagram Of Bilge System Coast Guard Drawing 400 WAGB 4801‐11, Rev E, Calculations Bilge System Coast Guard Drawing 400 WAGB 4801‐15, Rev B, RIP Diagram Bilge SysteM Coast Guard Drawing 400 WAGB 4801‐16, Rev B, RIP Arrangement Of Bilge System Aft Fr

Coast Guard Drawing 400 WAGB 4801‐17, Rev A, RIP Arrangement Of Bilge System Fwd Fr

Coast Guard Drawing 400 WAGB 4801‐20, Rev ‐, RIP Bilge System Ripout Coast Guard Drawing 400 WAGB 4801‐23, Rev A, RIP ‐ Diagram Of Oil Water Separator

System Installation Coast Guard Drawing 400 WAGB 4801‐25, Rev A, RIP Arrangement Of Oil Water Separator

Sys Installation xi (Rev 1)

Coast Guard Drawing 400 WAGB 4801‐27, Rev ‐, RIP‐Arr Of Fuel Oil Stripping/Waste Oil & Waste Wtr Hldg Tks Lvl Sensors

Coast Guard Drawing 400 WAGB 4801‐51, Rev ‐, Bilge System Posted Operating Instructions Coast Guard Drawing 400 WAGB 4801-58, Rev. -, SLEP Piping Mods To Suit Sewage

Retention Upgrade Coast Guard Drawing 400 WAGB 4803-1, Rev AA, Arr. Firemain 3rd. Dk. & Below Coast Guard Drawing 400 WAGB 4803-12, Rev G, Arrgt of CO2 Fixed Flood Sys Coast Guard Drawing 400 WAGB 4803-13, Rev C, Diag of CO2 Sys Coast Guard Drawing 400 WAGB 4803-19, Rev -, Piping System Mod Range Guard Fire Ext

Sys Instl Arrgt Dets Coast Guard Drawing 400 WAGB 4803-2, Rev. R, Arr. Firemain 2nd. Dk. Fwd. Fr. 113 Coast Guard Drawing 400 WAGB 4803-9, Rev V, Diagram Of Firemain, Flushing And

Sprinkling Systems Coast Guard Drawing 400 WAGB 4804-7, Rev K, Diag of H&C Potable Wtr Sys Coast Guard Drawing 400 WAGB 4804-010, Rev A, Diagram Hot & Cold Potable Water System Coast Guard Drawing 400 WAGB 4805-012, Rev B, Gas Turbine Lube Oil Cooling Replacement

Dia Coast Guard Drawing 400 WAGB 4805-1, Rev AF, Arr S.W. Cooling Gas Turb. Rm., Motor &

Gear Rm., & Motor Rm Coast Guard Drawing 400 WAGB 4805-2, Rev V, Diagram S.W. Cooling System Coast Guard Drawing 400 WAGB 4808-015, Rev S, Arr. Sanitary Flushing 3rd Deck & Below Coast Guard Drawing 400 WAGB 4808-17, Rev C, Operat Diag for Plumb & Interior Dk Coast Guard Drawing 400 WAGB 4808-23, Rev. P, Arr Pip Sewage Treat Rm 1 Coast Guard Drawing 400 WAGB 4808-24, Rev. M, Arr Piping Sewage Treat Rm 2 Coast Guard Drawing 400 WAGB 4808-4, Rev. W, Arr. Plumbing Drains 2nd. Dk. Fwd. Fr. 113 Coast Guard Drawing 400 WAGB 4808-5, Rev. Z, Arr. Of Plumbing & Int. Dk. Drains 2nd Deck

Aft 113 Coast Guard Drawing 400 WAGB 4808-6, Rev. Z, Arr. Plumbing Drains 3 Rd. Deck & Below Coast Guard Drawing 400 WAGB 4808-8, Rev N, Diag of Plumb & Inter Dk Drns Coast Guard Drawing 400 WAGB 4808-48, Rev A, RIP Arr Sanitary Flush System Modification

Drawing Coast Guard Drawing 400 WAGB 4808‐50, Rev A, RIP‐General Arrangement Of Oil Water

Separator System Coast Guard Drawing 400 WAGB 4808‐78, Rev B, Oily Waste Drain Piping Modification Fwd

Crane Replacement Coast Guard Drawing 400 WAGB 4808-79, Rev. -, SLEP Sewage System Diagram Coast Guard Drawing 400 WAGB 4808-80, Rev. -, SLEP Sewage Retention Upgrade – Key Plan Coast Guard Drawing 400 WAGB 4808-81, Rev. A, SLEP Sewage Mods Incid. To Retention

Upgrade – Fr 113 Fwd Coast Guard Drawing 400 WAGB 4808-82, Rev. A, SLEP Sewage Mods Incid. To Retention

Upgrade – Fr. 113 Aft Coast Guard Drawing 400 WAGB 4808-83, Rev. A, SLEP Sewage System A,and D 3-57-2-Q Coast Guard Drawing 400 WAGB 4808-84, Rev. A, SLEP Sewage System A,and D 3-57-1-Q xii (Rev 1)

Coast Guard Drawing 400 WAGB 4809‐01, Rev R, DIA. S.T., A.E. & OVFLS Coast Guard Drawing 400 WAGB 4809‐02, Rev AH, ARR. S.T., Air Escapes & Ovfls. FWD.

FR. 113

Coast Guard Drawing 400 WAGB 4809‐03, Rev AK, ARR. S.T., A.E. & Ovfls. AFT. FR. 113 Coast Guard Drawing 400 WAGB 4809-15, Rev. -, SLEP Piping Mods To Suit Sewage

Retention Upgrade Coast Guard Drawing 400 WAGB 4823-1, Rev D, Seachest & Strainer Compts Fwd 113 Coast Guard Drawing 400 WAGB 4823-2, Rev H, Seachest & Strainer Compt Aft FR 113 Coast Guard Drawing 400 WAGB 4901-6, Rev A, Arr Ship Service Air 3rd Deck & Below Coast Guard Drawing 400 WAGB 4901-8, Diagram Of Compressed Air System Coast Guard Drawing 400 WAGB 4901-19, RIP Diagram Ships Service Air System Mod Incid

To Air Cprsr Instl (POLAR STAR) Coast Guard Drawing 400 WAGB 4901-46, RIP Arr Ships Svcs Compa Sys Mod Incid To Air

Cprsr Instl Coast Guard Drawing 400 WAGB 5101-1, Rev G, A/D Boiler Smoke Pipes & Smoke Indicators Coast Guard Drawing 400 WAGB 5101-2, Rev F, Safety Valve Easing Gear Coast Guard Drawing 400 WAGB 5101-3, Rev AC, Arr Stm Boiler Blow, Escape, and Feed

Piping Coast Guard Drawing 400 WAGB 5101-4, Rev J, A/D of Condensate Drn Tnk Coast Guard Drawing 400 WAGB 5101-5, Rev F, Dia Steam Boil Blow, Escape and Feed Piping Coast Guard Drawing 400 WAGB 5101-6, Rev N, Arrangement & Details Boiler Feedwater

Tank Coast Guard Drawing 400 WAGB 5101-7, Rev 1, SDW 350M Marine Auxiliary Boiler Bare

Boiler Design Arrangement Coast Guard Drawing 400 WAGB 5200-2, Rev H, Turbine Stack Arrgt & Det Coast Guard Drawing 400 WAGB 5200-3, Rev A, Boiler Uptake Calc Coast Guard Drawing 400 WAGB 5200-4, Rev P, Arrgt & Dets of Hangers for Gas Turb Coast Guard Drawing 400 WAGB 5200-6, Rev D, Diagram of Diesel Generators Exhaust Piping Coast Guard Drawing 400 WAGB 5200-7, Rev N, Arrangement of Diesel Exhaust Piping Coast Guard Drawing 400 WAGB 5200-10, Rev G, Arrangement of Emergency Generator

Exhaust Coast Guard Drawing 400 WAGB 5501‐22, Rev A, RIP‐Oily Water Hldg Tks & Waste Oil

Tanks Mods Coast Guard Drawing 400 WAGB 5501-33, Rev. -, SLEP Piping Mods To Suit Sewage

Retention Upgrade Coast Guard Drawing 400 WAGB 5801-1, Rev N, Arr. Of Distilling Plant Piping Coast Guard Drawing 400 WAGB 5801-2, Rev F, Diagram. Of Distilling Plant Coast Guard Drawing 400 WAGB 6000-5, Rev M, Electrical Sys Intcon Wire Diag Coast Guard Drawing 400 WAGB 6000-17, Rev U, Electrical Distribution System One-Line

Diagram (WAGB 10) Coast Guard Drawing 400 WAGB 6000-20, Rev. -, SLEP Transfer Pump Electrical Details To

Suit Sewage System Upgrade xiii (Rev 1)

Coast Guard Drawing 400 WAGB 6202-2, Rev. F, Power System List Of Motors And Controllers

Coast Guard Drawing 400 WAGB 6202-4, Rev. T, Power System 3rd Deck Fwd Coast Guard Drawing 400 WAGB 6202-5, Rev. AC, Power System 3rd Deck Aft Coast Guard Drawing 400 WAGB 6202-6, Rev. Y, Power System 2nd Deck - FWD Coast Guard Drawing 400 WAGB 6202-19, Rev. P, Wireways-3rd Deck Fwd Coast Guard Drawing 400 WAGB 6202-20, Rev. T, Wireways 3rd Deck Aft Coast Guard Drawing 400 WAGB 6202-21, Rev. N, Wireways 2nd Deck Fwd Coast Guard Drawing 400 WAGB 6202-40, Rev N, Central Hydraulic System E & IWD Coast Guard Drawing 400 WAGB 6202‐65, Rev A, RIP Bilge Pump Electrical Ripout Coast Guard Drawing 400 WAGB 6202‐66, Rev A, RIP‐Bilge, Ballast And Dewatering Sys Elec

Schem & Intcon Wiring Diag Coast Guard Drawing 400 WAGB 6202-70, Rev A, RIP-Ships Service Air System Electrical

Interconnection Wiring Diagram Coast Guard Drawing 400 WAGB 6202‐74, Rev A, RIP‐Oily Water Separator System Elec

Interconnection Wiring Diagram Coast Guard Drawing 400 WAGB 6202-100, Rev -, Schematic Wiring Diagram Mods to Suit

Fire Pump Replacement – Blackmer LD17 Coast Guard Drawing 400 WAGB 6202-106, Rev. -, SLEP Tank Level Indicator Installation

Details To Suit Sewage System Upgrade Coast Guard Drawing 400 WAGB 6307-7, Rev F, Miranda Davit relocation Electrical Installation Coast Guard Drawing 400 WAGB 6401-32, Rev -, SLEP Lighting And Alarms To Suit New

Sewage Treatment Spaces Coast Guard Drawing 400 WAGB 6502-1, Rev N, General & Intership Announcing System

CKTS "1MC & 6MC" I.W.D

Coast Guard Drawing 400 WAGB 6502-6, Rev M, General & Intership Announcing System

CKT "1MC & 6MC" Wire Mark List Coast Guard Drawing 400 WAGB 6504-3, Rev X, High Temperature Alarm Sys & Fire

Detection Alarm Sys Ckt “F” & “5F” E & IWD Coast Guard Drawing 400 WAGB 6504-4, Rev S, Flooding Alarm System Ckt “FD” E & IWD Coast Guard Drawing 400 WAGB 6504-5, Rev G, CO2 Release Alarm Sys Ckt FR-E+IWD Coast Guard Drawing 400 WAGB 6504-9, Rev -, Boiler Emergency Shutdown WD Coast Guard Drawing 400 WAGB 6505‐05, Rev Q, Automation Interconnection Wiring Diagram Coast Guard Drawing 400 WAGB 6505-011, Rev G, Sal Indicator System Ckts “ISB & “25B”

E&WD

Coast Guard Drawing 400 WAGB 6505-020, Rev L, Installation of Gyro Compass System MK-

39 & MK27F Elementary Wiring Diagram & Details Coast Guard Drawing 400 WAGB 7802-1, Rev. C, Ammo/Explosives Elevator & Dumbwaiter

Installation Dets Coast Guard Drawing 400 WAGB 7802-2, Rev E, Elevators Elementary Wiring Diagram Coast Guard Drawing 400 WAGB 8700‐08, Rev V, Electrical Tank Level Indicator System E &

IWD

xiv (Rev 1)

COAST GUARD PUBLICATIONS

Coast Guard Polar Star 1MC System Operational Verification Test Coast Guard Surface Forces Logistics Center Technical Standard (TS) 505, 2013, Piping Systems Coast Guard Surface Forces Logistics Center Technical Standard (TS) 507, 2016, Machinery and

Piping Designating and Marking Coast Guard Technical Publication (TP) 1991, Engineers Operating Manual Coast Guard Technical Publication (TP) 1992, Engineers Operating Manual Coast Guard Technical Publication (TP) 1993, Ship Information Book – Hull and Mechanical Coast Guard Technical Publication (TP) 1997, Rev -, Interior Communications Switchboard Coast Guard Technical Publication (TP) 2029, Manufacturer's Instruction Book - SWBS

Group(s) 242-262 Coast Guard Technical Publication (TP) 2030, SWBS 314, Section A, Rev -, Switchboard 400 Hz Coast Guard Technical Publication (TP) 2030, SWBS 314, Section B, Rev -, Installation, Operation and Maintenance for Motor Generator Sets P/N 7156-1, 7156-2 (5KW) & 7157-1

(10KW)

Coast Guard Technical Publication (TP) 2030, SWBS 324, SECTION C, Rev -, Manual Transfer Switch – 225 AMP

Coast Guard Technical Publication (TP) 2031, SWBS 500, Section A, 1971, Group Control Center

Coast Guard Technical Publication (TP) 2031, SWBS 500, Section B, 1974, Group Control Center, Parts/Material List

Coast Guard Technical Publication (TP) 2033, Manufacturer’s Instruction Book – SWBS Group(s) 503-510

Coast Guard Technical Publication (TP) 2033, Rev -, Gas Turbine Water Wash Pump Coast Guard Technical Publication (TP) 2033, SWBS 503, Section B, Rev -, Diesel Oil, JP-5 and

Lube Oil Pumps Coast Guard Technical Publication (TP) 2034, Rev -, Manufacturer's Instruction Book - SWBS

GROUP(S) 511-514

Coast Guard Technical Publication (TP) 2035, SWBS 517, Section A, Rev -, Auxiliary Boiler Coast Guard Technical Publication (TP) 2036, SWBS 531, Section A, Rev -, Distilling Plant Coast Guard Technical Publication (TP) 2037, SWBS 551, Section A, Rev -, Rotary Screw

Compressors Coast Guard Technical Publication (TP) 2037, SWBS 555, Section C, Rev -, Fire Extinguishing

System CO2 Coast Guard Technical Publication (TP) 2038, SWBS 651, Sections A, C Through O, Rev -, Manufacturer's Instruction Book - SWBS Group(S) 625-651 Coast Guard Technical Publication (TP) 2038, SWBS 651, Section B, Rev -, Dumbwaiter Coast Guard Technical Publication (TP) 2039, Rev -, Manufacturer's Instruction Book - SWBS

Group 651 Coast Guard Technical Publication (TP) 2042, SWBS 436, Section A, Rev -, Fire Detection

Alarm System Control Panel- Model W924A Coast Guard Technical Publication (TP) 2042, Manufacturer's Instruction Book - SWBS

Group(s) 665-985 xv (Rev 1)

Coast Guard Technical Publication (TP) 3205, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 3442, FOP Model USPX 413 – Operation, Maintenance & Repair Manual

Coast Guard Technical Publication (TP) 3443A, 2017; Lube Oil Purifier (LOP) Model WHPX

Coast Guard Technical Publication (TP) 3975, Oily Water Separator -50 GAL/MIN Model C50 Coast Guard Technical Publication (TP) 4391, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4391, Manufacturer's Instruction Book-SWBS Group(s)

235-241 Coast Guard Technical Publication (TP) 4391, Propulsion Generator and Main Motor Coast Guard Technical Publication (TP) 4391, SWBS 503, Section C, Rev -, Main Motor & Shaft

Lube Oil Cooling Pump Model - 1-1/2 X 2X 6J Coast Guard Technical Publication (TP) 4395, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4411, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4415, SWBS 581, Section A, Anchor Windlass System Coast Guard Technical Publication (TP) 4668, 29-NOV-07, Miranda Davit - Model Mrt 3900 Coast Guard Technical Publication (TP) 4978, Telescoping Boom Crane, Model TB60-60 Coast Guard Technical Publication (TP) 4979, 20-JAHN-2014, Knuckle Boom Model K280-70 Coast Guard Technical Publication (TP) 4986, Modified Controllable Pitch Propeller System Coast Guard Technical Publication (TP) 4989, SWBS 241, Section A, Rev -, Main Reduction

Gear Drive Coast Guard Technical Publication (TP) 5502, Fire Suppression System - Model WHDR Coast Guard Technical Publication (TP) 9100, SWBS 593, Rev -, Sanitary Pump – Model, M-

P/N 3X2.5X7LA-10MSS

Coast Guard Technical Publication (TP) 9168, Pallet Truck - MODEL E16N-1266-120 Coast Guard Technical Publication Damage Control Manual for USCGC POLAR STAR, including plates Coast Guard Yard Drawings YD-505-001, Rev -, Orifice Plate Standard Detail Commandant Instruction (COMDTINST) M9085.1 (series) Naval Engineering Computer Aided

Design Standards

OTHER REFERENCES

Allis-Chalmers Corporation (DWG) 9025-AG-3, Spacer Ring Rev.( 02) American Bureau of Shipping (ABS) Naval Vessel Rules (NVR), 2014, Part 5, Chapter 1, Section

1A/4.2 (5-1-1A/4.2) American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels, 2019 American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels, 2019, Part 4, Chapter 7 Section 3 xvi (Rev 1)

American National Standards Institute/Acoustical Society of America (ANSI/ASA) S2.19, 2004, Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 1:

Determination of Permissible Residual Unbalance

American National Standards Institute/Electrical Apparatus Service Association (ANSI/EASA) AR100, 2006, Recommended Practice for the Repair of Rotating Electrical Apparatus

American National Standards Institute/American Society for Quality Control (ANSI/ASQC) 9001-2008, Quality Management Systems – Model for Quality Assurance in Design, Development, Production, Installation, and Servicing Requirements

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2011, Disinfection of Water-Storage Facilities

American National Standards Institute/NSF International (ANSI/NSF) 61, 2013, Drinking Water System Components - Health Effects

American Society of Mechanical Engineers (ASME) A17.1, 2016, Safety Code for Elevators and Escalators

American Society of Mechanical Engineers (ASME) A17.2, 2017, Guide for Inspection of Elevators, Escalators, and Moving Walks

American Society of Mechanical Engineers (ASME) B16.34, 2013, Valves-Flanged, Threaded, and Welding End

American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC), American Society of Mechanical Engineers (ASME) CSD-1, 2018, Controls and Safety Devices for Automatically Fired Boilers

American Society of Mechanical Engineers (ASME) QEI-1, 2018, Standard for the Qualification of Elevator Inspectors

American Society of Testing and Materials (ASTM) B127, 2005, Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

American Society of Testing and Materials (ASTM) B164, 2003, Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

American Society of Testing and Materials (ASTM) B61, 2015, Standard Specification for Steam or Valve Bronze Castings

ASTM International (ASTM) A53, 2005, Standard Specification for Pipe, Steel, Black and Hot- Dipped, Zinc-Coated Welded and Seamless

ASTM International (ASTM) B127, Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

ASTM International (ASTM) B171, 2018, Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

ASTM International (ASTM) B369-09, 2016, Standard Specification for Copper-Nickel Alloy Castings

ASTM International (ASTM) B466, 2009, Standard Specification for Seamless Copper-Nickel Pipe and Tube

ASTM International (ASTM) B584, 2014, Standard Specification for Copper Alloy Sand Castings for General Applications

ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by

Tape Test xvii (Rev 1)

ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

ASTM International (ASTM) D5363, 2008; Standard Specification for Anaerobic Single- Component Adhesives (An)

ASTM International (ASTM) F1138-98, (2014), Standard Specification for Spray Shields For Mechanical Joints

ASTM International (ASTM) F1508-96, 2016, Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

ASTM International (ASTM) F1510, (series) Standard Specification for Rotary Positive Displacement Pumps, Shipboard Use

ASTM International (ASTM) F1836M-97 (2007), Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

ASTM International (ASTM) F1837M-97 (2007), Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

ASTM International (ASTM) F708-92 (2018), Standard Practice for Design and Installation of Rigid Pipe Hangers

ASTM International (ASTM) F992-86, (2011) Standard Specification for Valve Label Plates ASTM International (ASTM) F998, (2018) Standard Specification for Centrifugal Pumps, Shipboard Use ASTM International (ASTM) G82-98, (Reapproved 2014) Standard Guide for Development and

Use of a Galvanic Series for Predicting Galvanic Corrosion Performance Code of Federal Regulations (CFR) Title 29, Part 1915.15, 2007, Shipyard Employment Code of Federal Regulations (CFR) Title 46, Part 56, Piping Systems and Appurtenances Code of Federal Regulations (CFR) Title 46, Part 61.05, 2013, Tests and Inspections of Boilers Code of Federal Regulations (CFR) Title 46, Part 62.25, 2019, General Requirements for All

Automated Vital Systems Code of Federal Regulations (CFR) Title 46, part 113.10 Fire and Smoke Detecting and Alarm

Systems Code of Federal Regulations (CFR) Title 46, part 113.50 Public Address Systems Code of Federal Regulations (CFR) Title 46, Part 147.65, 2018, Halon 1301 Fixed Cylinders Code of Federal Regulations (CFR) Title 46, part 161.002, Fire Detection Systems Code of Federal Regulations (CFR) Title 46, part 162.050, Pollution Prevention Equipment Code of Federal Regulations (CFR) Title 46, part 176.810, 2019, Fire Protection Commercial Item Description (CID) A-A-59003, 1995, Amplifiers, Audio Frequency; and

Amplifier-Control Groups-Shipboard Announcing Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Antiseize, Zinc

Dust-Petrolatum Commercial Item Description (CID) A-A-59473, 1999, Curtain, Track, and Suspension System, Berth (Naval Shipboard) Data Item Description DI-NDTI-80603A, Test Procedure Data Item Description DI-SESS-81874, Engineering Data For Provisioning (EDFP) Data Item Description DI-TMSS-81815, Commercial Off The Shelf (COTS) Manuals xviii (Rev 1)

Department of Defense Standard Practice MIL-STD-1399 S 300 P2, 2018, Interface Standard for Shipboard Systems Section 300. Part 2 Medium Voltage Electric Power, Alternating Current

Department of Defense Standard Practice MIL-STD-1623, 2015, Fire Performance Requirements and Approved Specifications For Interior Finish Materials and Furnishings (Naval Shipboard Use)

Department of Defense Standard Practice, MIL-STD-2003, Rev A, Electric Plant Installation Standard Methods for Surface Ships and Submarines

Department of Defense Standard Practice, MIL-STD-777, Rev F, Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships

Eaton Hydraulics LLC, Filtration Division, Installation, Operation & Maintenance Manual Model 570 Duplex Basket Strainer, 06/2011

Federal Specification (Fed Spec) RR-C-271, Nov 1995, Chain and Attachments, Welded and Weldless

Federal Specification (Fed Spec) HH-P-151, Rev F, Not 1, Packing, Rubber Sheet, Cloth Insert Federal Specification (Fed Spec) QQ-N-281, Rev D, Amend 2, Nickel-Copper-Aluminum Alloy, Wrought (UNS) N05500 IEEE Standard 45, 2002, Recommended Practice for Electrical Installations on Shipboard International Maritime Organization (IMO) Resolution MSC.98(73), 2000, International Code for

Fire Safety Systems International Maritime Organization (IMO) Resolution MEPC107(49), 2003, Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships International Maritime Organization (IMO) Resolution A.752(18), 1993, Guidelines for the

Evaluation, Testing and Application of Low-Location Lighting on Passenger Ships International Electrotechnical Commission (IEC) 61131-3, 2013, Programmable Logic

Controllers International Electrotechnical Commission (IEC) 61373, 2nd Edition, Railway applications –

Rolling stock equipment – Shock and vibration tests International Organization for Standardization (ISO) 14119, 2013, Safety Of Machinery -

Interlocking Devices Associated With Guards - Principles For Design And Selection International Organization for Standardization (ISO) 4406, 7/13/2004, Hydraulic Fluid Power --

Fluids -- Method for Coding the Level of Contamination by Solid Particles International Organization for Standardization (ISO), 21500:2016, Guide to Project Management Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2013

Edition, Pressure Testing Of Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2011

Edition, Butterfly Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010

Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010

Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service Military Detail Specification MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy

(Commercially Accepted - ASTM B418) Military Detail Specification MIL-A-22262, Mar 1996, Abrasive Blasting Media Ship Hull Blast

Cleaning xix (Rev 1)

Military Detail Specification MIL-B-24480, 1991, Bronze, Nickel-Aluminum (UNS No. C95800) Casting for Seawater Service

Military Detail Specification MIL-C-15726, Rev F, Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire

Military Detail Specification MIL-C-24500, 1990, Cloth, Drapery, Bunk Curtain, Slipcovers, and Labels, Fire Retardant

Military Detail Specification MIL-C-24633, Apr 1998, Chain, Stud Link, Anchor, Low Alloy Steel, Flash Butt Welded

Military Detail Specification MIL-D-16791, Rev G, Detergents, General Purpose (Liquid, NonIonic)

Military Detail Specification MIL-DTL-1222, Rev J, Studs, Bolts, Screws and Nuts for Applications Where a High Degree of Reliability Is Required

Military Detail Specification MIL-DTL-15024, 1997, General Specification for Plates, Tags, and Bands for Identification of Equipment

Military Detail Specification MIL-DTL-167-1A, 2005, Mechanical Vibrations of Shipboard Equipment (Type I-Environmental and Type II- Internally Excited)

Military Detail Specification MIL-DTL-23549, Feb 2007, Grease, General Purpose Military Detail Specification MIL-DTL-24223, Rev D, Loudspeaker, Permanent Magnet, Shipboard Announcing Systems Military Detail Specification MIL-DTL-24643, Rev C, Cables, Electrical, Low Smoke Halogen-

Free, For Shipboard Use, General Specification Military Detail Specification MIL-DTL-24696, 2008, Detail Specification Gasket, Sheet, Non-

Asbestos Military Detail Specification MIL-F-1183, Rev J, Sup 1, Fittings, Pipe, Cast Bronze, Silver-

Brazing, General Specifications for Military Detail Specification MIL-I-24092, Rev A, Insulating Resin, Solventless, Baking, Semi-

Rigid, for Dip Processing, Grade SH, Class 155 to 200 Thermal Class, 9/21/93 Military Detail Specification MIL-M-23813, Rev A, Microphone, Intercommunication and

Announcing System, Naval Shipboard Military Detail Specification MIL-R-21252B, May 1991, Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing Military Detail Specification MIL-S-16032, Revision M, Amendment 1, Switches and Detectors, Shipboard Alarm Systems Military Detail Specification MIL-S-45180, 1998, Sealing Compound, Gasket, Hydrocarbon

Fluid and Water Resistant Military Detail Specification MIL-T-15005, Rev F, Tubes, Condenser And Heat Exchanger, Copper-Nickel Alloys (UNS C70600 & C71500) Military Detail Specification MIL-T-16420, 1978, Tube, Copper-Nickel Alloy, Seamless and

Welded (Copper Alloy Numbers 715 and 706) Military Detail Specification MIL-T-22214, Rev C, Tube, Condenser And Heat Exchanger With

Integral Fins (UNS ALLOY NOS. C17500, C70600, C12200) Military Performance Specification MIL-PRF-1149, Jun 1998, Gasket Materials, Synthetic

Rubber, 50 and 65 Durometer xx (Rev 1)

Military Performance Specification MIL-PRF-16173, Sep 2006, Corrosion Prevention Compound, Solvent Cut Back, Cold Application

National Board of Boiler and Pressure Vessel Inspectors (NBBI), NBIC, 2017, National Board Inspection Code

National Electrical Manufacturers Association (NEMA) 250, 2008, Enclosures for Electrical Equipment (1000 Volts Maximum)

National Electrical Manufacturers Association (NEMA) ICS-6, 1993, Industrial Control and Systems: Enclosures

National Electrical Manufacturers Association (NEMA) MG-1, 2018, Motors and Generators National Electrical Manufacturers Association (NEMA) Standard ICS-1, 2003, Industrial Control and Systems (series) National Fire Protection Association (NFPA) 12, 2018, Standard on Carbon Dioxide

Extinguishing Systems National Fire Protection Association (NFPA) 12A, 2018, Standard on Halon 1301 Fire

Extinguishing Systems National Fire Protection Association (NFPA) 17A, 2017, Standard for Wet Chemical

Extinguishing Systems National Fire Protection Association (NFPA) 70, 2011, National Electric Code National Fire Protection Association (NFPA) 72, 2010, National Fire Alarm and Signaling Code National Fire Protection Association (NFPA) 85, 2019, Boiler and Combustion Systems Hazards

Code National Fire Protection Association (NFPA) 312, 2016, Standard for Fire Protection of Vessels

During Construction, Repair, and Lay-up National Fire Protection Association (NFPA) 51B, 1999, Standard for Fire Prevention During

Welding, Cutting, and Other Hot Work National Marine Electronics Association (NMEA) 0183, version 4.11, Standard For Interfacing

Marine Electronic Devices Naval Sea Systems Command (NAVSEA) S9555-AT-MMA-010, Rev 4, Technical Manual for

HALON 1301 Fixed Fire Extinguishing System,<Restricted Distribution: Available for inspection from the COR upon contract award>

Naval Sea Systems Command (NAVSEA) Design Practices and Criteria Manual for Sewage Collection, Holding and Transfer (CHT) Systems, Chapter 593 (T9500-AA-PRO-100)

Naval Sea Systems Command (NAVSEA) Technical Publication 0900-LP-001-7000, Rev -;

Fabrication and Inspection of Brazed Piping Systems

Naval Sea Systems Command (NAVSEA) Technical Publication T9074-AS-GIB-010/271, Apr 1997, Requirements for Nondestructive Testing Methods

Naval Sea Systems Command (NAVSEA) Type and Standard Drawing 803-1385866, Rev E, Penetration, Bulkhead and Deck

Naval Sea Systems Command (NAVSEA) Type and Standard Drawing 804-5773931, Rev A, Acoustic, and Thermal Insulation for Compartments Installation Details

Naval Sea Systems Command (NAVSEA) Type and Standard Drawing 804-8436625, Rev -, Safety Nets, Deck Edge, Aluminum Frame, Synthetic Net

Naval Sea Systems Command (NAVSEA) Type and Standard Drawing No. S2803-980209, Working load label plates for load handling equipment, padeyes, and other fittings xxi (Rev 1)

SNT-TC-1A, 2016, Recommended Practice for Personnel Qualification and Certification in Nondestructive Testing

Society of Allied Weight Engineers, (SAWE) RP M-7, 2017, Weight Control Technical Requirements For MSC and Similar Ships, Commercial Ships And Other Small Craft

Society of Allied Weight Engineers, (SAWE), RP M-4, 2012, Vendor Weight Control for the Marine Industry

Society of Allied Weight Engineers, (SAWE), RP-14, 2001, Weight Estimating and Margin Manual for Marine Vehicles

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2013, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) J1273, 2014, Recommended Practices for Hydraulic Hose Assemblies

Society of Automotive Engineers (SAE) J1942-1, 2008, Qualified Hoses…