Package 3 - J-Plant and HEMP - CID_FFE-1.pdf

Thule Air Base, Greenland

Repair BMEWS Power Building 4016

(J-Plant) & HEMP Shielding

COMPREHENSIVE INTERIOR DESIGN

(CID & FF&E)

Final Submission

10 May 2023

New York District

Repair BMEWS Bldg 4016 (J-Plant)

Comprehensive Interior Design Package Final Submission

10 May 2023 New York District

SEAL PAGE

Professional Certification. I Kathryn B. Charboneau hereby certify that these documents were prepared or approved by me, and that I am a duly Licensed Professional Interior

Designer under the laws of the State of Maryland.

License No. 2398

Expiration Date: 12-12-2023

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

TABLE OF CONTENTS

Repair BMEWS Building 4016 (J-Plant)

Comprehensive Interior Design Package Final Submission

10 May 2023

TABLE OF CONTENTS

Proj. No. D3294203

1 STRUCTURAL INTERIOR DESIGN (SID)

1.1 SID Design Objectives

1.2 Interior Finish Boards

1.3 SID Documents

I-101 First Floor Finish Plan

I-102 Second Floor Finish Plan

I-103 First Floor Signage Plan

I-104 Second Floor Signage Plan

I-201 Interiors Enlarged Plans & Elevations

I-202 Interiors Enlarged Plans & Elevations

I-501 Interior Details

I-601 Materials & Window Treatment Finish Schedule

I-602 Signage Schedule

I-603 Interior Finish Schedule

2 FURNITURE, FIXTURES, & EQUIPMENT (FF&E)

2.1

2.2

2.3

2.4

2.5

FF&E Design Objectives

FF&E Order Forms

Furniture Schedule

FF&E Finish Boards

FF&E Documents

I-105 First Floor Furniture Plan

I-106 Second Floor Furniture Plan

Comprehensive Interior Design Package Final Submission

10 May 2023

TABLE OF CONTENTS

Proj. No. D3294203

For additional information and questions please contact the Designer of Record:

Anita Bowman Jacobs 1100 North Glebe Road, Suite 500 Arlington, VA 22201 Phone: 571-218-1374 anita.bowman@jacobs.com

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

Furniture, Fixtures, & Equipment (FF&E)

1.1 SID Design Objectives

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

Structural Interior Design (SID) Design Objectives

SID DESIGN OBJECTIVES

A. GENERAL SCOPE

The repair of the BMEWS Building 4016 (J-Plant), Greenland includes the renovation of the facility interior of this multi-story power generation building utilizing conventional design and construction methods to accommodate the mission of the facility. The facility shall be compatible with applicable DoD, Air Force, and base design standards.

B. DESIGN CRITERIA

The design will adhere to the following design criteria for Building 4016 (J-Plant), Thule AFB Greenland:

Unified Facilities Criteria (UFC)

• UFC 3-120-10 Interior Design

C. INTERIOR DESIGN OVERVIEW

The interior finishes will be simple, yet functional and durable. The colors will be neutral with gray tones and accents of blue. The flooring finishes offer durability, easy maintenance and safety while providing complementary accents that pull the remainder of the room finishes together. The flooring on the first level living quarters which includes the living area, laundry rooms and corridor will be a luxury vinyl tile (LVT) tile that is cleanable and easily maintained. Carpet tile will be a mixture of blue, and gold with neutral undertones. Carpet tile that will be durable and easily replaced when stained or damaged will be provided in the two sleeping rooms.

Porcelain tile will be provided in the restroom and the full bathroom and sealed concrete throughout the maintenance areas of the facility. Flooring for the second level will be sealed concrete, with the exception of luxury vinyl (LVT) tile in the breakroom, and porcelain tile in the toilet room. All restrooms/toilet rooms will be finished with a porcelain through-color tile with rectified edges that will provide the areas with a unified look and ease of cleaning.

The majority of the Switch Gear, Generator and maintenance spaces are of HEMP construction. Other wall colors will be painted a soothing coordinating neutral throughout the facility. A durable enamel paint will be used in the maintenance and stair areas.

Building 4016 will reflect both user’s needs and functionality and will provide a comfortable yet durable facility in which to complete their operations. The aesthetics of the building will provide an image of security, strength, professionalism and pride in country and community. The materials used will need to be durable, with low

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

Structural Interior Design (SID) Design Objectives maintenance and an aesthetically pleasing appearance. A preference for materials with recycled content will be exercised in the furniture selection.

D. CLASS JUSTIFICATION AND APPROVAL (J&A)

USACE has requested a Class Justification and Approval (J&A) for Other than Full and Open Competition to all Contracting Officers to issue solicitations for construction contracts, where “brand name or equal” references are necessary to effectively communicate interior color finish selections. It was fund that it is necessary for the government to include brand names and proprietary specifications for finishes to have a complete design that can be properly conveyed to the construction contractor. USACE has received approval for an estimated $775,000,000, which covers future projects from Fiscal Year (FY) 22 through (FY) 26.

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

1.2 Interior Finish Boards

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

ACT-1 SURFACE: CEILING

MATERIAL: ACOUSTICAL CEILING TILE

MANUFACTURER: ARMSTRONG

MODEL:

TILE: 1952 ULTIMA – LAY-IN, BEVELED TEGULAR WITH 14MM GRID,

610MM X 610MM X 19MM

COLOR: WHITE

REMARKS:

CG-1 SURFACE: WALL

MATERIAL: CORNER GUARD

MANUFACTURER: CS ACROVYN

MODEL: C0-8, 5MM NOSE RADIUS GUARD, 89MM X 89MM LEG

COLOR: STAINLESS STEEL

REMARKS: INSTALLATION: TOP OF BASE, FULL HEIGHT

CPT-1 SURFACE: FLOOR

MATERIAL: MODULAR CARPET TILE

MANUFACTURER: TARKETT

MODEL: AFTERMATH II 03026, 610MM X 610MM MODULAR TILE

COLOR: 23512 TAPESTRY

REMARKS: INSTALLATION: MONOLITHIC

GRT-1 SURFACE: GROUT

MATERIAL: TILE GROUT

MANUFACTURER: LATICRETE

MODEL: SANDED GROUT

COLOR: 24 NATURAL GREY

REMARKS: FLOORS, WITH PFT-1 & PFT-2

GRT-2 SURFACE: GROUT

MATERIAL: TILE GROUT

MANUFACTURER: LATICRETE

MODEL: UNSANDED GROUT

COLOR: 78 STERLING SILVER

REMARKS: WALLS, WITH PWT-1 & PWT-2

FIELD COLOR – RESTROOMS

LVT-1 SURFACE: FLOORING

MATERIAL: LUXURY VINYL TILE

MANUFACTURER: TARKETT

MODEL: STRIA MARBLE, 152MM X 914MM

COLOR: BRECCIA

REMARKS: LIVING, LAUNDRY AND BREAK RM AREAS

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

MAT-1 SURFACE: FLOORING

MATERIAL: RECESSED ENTRANCE FLOOR MAT

MANUFACTURER: MAT INC.

MODEL: FOOT GRILLES-ADVANCED TRACK

COLOR: GRILL ALUMINUM, CARPET: NEW YORK DARK GRAY

REMARKS: ENTRANCES

PFT-1 SURFACE: FLOOR

MATERIAL: PORCELAIN TILE

MANUFACTURER: DALTILE

MODEL: PORTFOLIO, 610MM X 610MM TILE

COLOR: ASH GREY PF05

REMARKS: FLOOR

PFT-2 SURFACE: FLOOR

MATERIAL: PORCELAIN TILE

MANUFACTURER: DALTILE

MODEL: PORTFOLIO, 51MM X 51MM TILE

COLOR: ASH GREY PF05

REMARKS: FLOOR

PLAM-1 SURFACE: MILLWORK

MATERIAL: PLASTIC LAMINATE

MANUFACTURER: FORMICA

MODEL: MATTE FINISH

COLOR: PLATINUM

REMARKS: LIVING AREA & BREAKROOM MILLWORK

PT-1 SURFACE: WALLS

MATERIAL: GENERAL WALL PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW 6001 GRAYISH

REMARKS: FIELD PAINT

PT-2 SURFACE: WALLS

MATERIAL: WALL PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW 6002 ESSENTIAL GRAY

REMARKS: LIVING AREA & BREAKROOM

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

PT-3 SURFACE: WALLS

MATERIAL: WALL PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW 7015 REPOSE GRAY

REMARKS: RESTROOMS, LIVING AREA, BREAKROOM & SLEEPING RMS

PT-4 SURFACE: CEILINGS (GYP. BD)

MATERIAL: CEILING PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, FLAT

COLOR: SW 7004 SNOWBOUND

REMARKS:

PT-5 SURFACE: DOOR FRAMES, PAINTED DOOR TRIM

MATERIAL: DOOR FRAME/TRIM PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, SEMI GLOSS

COLOR: SW 6005 FOLKSTONE

REMARKS:

PT-6 SURFACE: STAIR RAILINGS & STRINGERS

MATERIAL: STAIR RAILINGS/STRINGER PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, SEMI GLOSS

COLOR: SW 7019 GAUNTLET GRAY

REMARKS:

PT-7 SURFACE: INTERIOR STAIR WALLS

MATERIAL: INTERIOR STAIR PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: ALKYD ENAMEL SATIN

COLOR: SW 7015 REPOSE GRAY

REMARKS:

PT-8 SURFACE: WALLS

MATERIAL: WALL PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: ALKYD ENAMEL SATIN

COLOR: SW 6002 ESSENTIAL GRAY

REMARKS: MAINTENANCE/UTILITY SPACES

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman

JFI Project No.: D3294203 Final Submission

PT-9 SURFACE: HEMP WALLS, CEILINGS

MATERIAL: WALL & CEILING PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PRO INDUSTRIAL ACRYLIC PAINT

COLOR: SW 7004 SNOWBOUND

REMARKS: HEMP SPACES

PWT-1 SURFACE: WALLS

MATERIAL: PORCELAIN WALL TILE

MANUFACTURER: DALTILE

MODEL: PORTFOLIO, 305MM X 610MM TILE

COLOR: WHITE PF02

REMARKS: WALL

PWT-2 SURFACE: WALLS

MATERIAL: PORCELAIN WALL TILE

MANUFACTURER: DALTILE

MODEL: PORTFOLIO, 305MM X 610MM TILE

COLOR: ASH GREY PF05

REMARKS: WALL

RB-1 SURFACE: WALLS

MATERIAL: RUBBER BASE

MANUFACTURER: ROPPE

MODEL: COVE BASE, 102MM HIGH

COLOR: 194 BURNT UMBER

REMARKS: FOR RESILIENT FLOORING AND AT SEALED CONCRETE

RB-2 SURFACE: WALLS

MATERIAL: RUBBER BASE

MANUFACTURER: ROPPE

MODEL: STRAIGHT BASE, 102MM HIGH

COLOR: 194 BURNT UMBER

REMARKS: FOR CARPET FLOORING

RST-1 SURFACE: STAIRS

MATERIAL: RUBBER TREADS & RISERS

MANUFACTURER: ROPPE

MODEL: HAMMERED TEXTURE

COLOR: 114 LUNAR DUST

REMARKS: RISERS (SOLID – NO TEXTURE)

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

SC-1 SURFACE: FLOORING

MATERIAL: SEALED CONCRETE

MANUFACTURER: -

MODEL: -

COLOR: -

REMARKS: GENERAL USE

SF-1 SURFACE: SHOWER FLOOR PAN

MATERIAL: TERRAZZO

MANUFACTURER: FIAT

MODEL: MONTEREY SHOWER FLOOR

COLOR: WHITE PORTLAND CEMENT WITH WHITE CHIPS

REMARKS: SHOWER FLOOR

SS-1 SURFACE: COUNTERTOPS

MATERIAL: SOLID SURFACE

MANUFACTURER: CORIAN

MODEL: -

COLOR: SAGEBRUSH

REMARKS: BREAKROOM & LIVING AREA

STN-1 SURFACE: DOOR

MATERIAL: DOOR STAIN FINISH

MANUFACTURER: MASONITE ARCHITECTURAL

MODEL: -

COLOR: NUTMEG

REMARKS: FINISH ON BEECHWOOD DOORS

TS-1-3 SURFACE: FLOOR

MATERIAL: TRANISITION STRIP

MANUFACTURER: SCHLUTER SYSTEMS

MODEL: -

COLOR: ALUMINUM

REMARKS: -

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

ACT-1

ARMSTRONG

TILE: 1952 ULTIMA LAY-IN BEVELED TEGULAR

WITH 9/16” GRID, 24" X 24"”

WHITE

5.75”X5.75”

ACT-1

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

CPT-1

TARKETT

AFTRMATH II, 03026, 24" X 24" (610 X 610 MM) MODULAR TILE

23512 TAPESTRY

CPT-1

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

PT-1

SHERWIN WILLIAMS

EGGSHELL

SW6001 GRAYISH

3”x3”

PT-1

PT-2 & PT-8

SHERWIN WILLIAMS

EGGSHELL & ALKYD

ENAMEL SATIN

SW6002 ESSENTIAL

GRAY

2”x3”

PT-2/PT-8

PT-3 & PT-7

SHERWIN WILLIAMS

EGGSHELL & ALKYD

ENAMEL SATIN

SW7015 REPOSE

GRAY

2”x3”

PT-3/PT-7

PT-4

SHERWIN WILLIAMS

FLAT

SW7004 SNOWBOUND

2”x3”

PT-4/PT-9

PT-5

SHERWIN WILLIAMS

SEMI-GLOSS

SW6005 FOLKSTONE

2”x3”

PT-5

PT-6

SHERWIN WILLIAMS

SEMI GLOSS

SW7019 GAUNTLET

GRAY

2”x3”

PT-6

CG-1

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

RST-1 RB-1/RB-2

LVT-1

RST-1

ROPPE

HAMMERED

TEXTURE/

SMOOTH FOR

TREADS

RB-1

ROPPE

194 BURNT

UMBER WALL

BASE,

4”COVED AND

STRAIGHT

BASE 2”X4”

Interior Finish Boards

1100 North Glebe Road, Suite 500

SS-1

CORIAN

SAGEBRUSH

SS-1

PLAM-1

PLAM-1

FORMICA

902-58 PLATINUM

MATTE

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

PWT-1

DALTILE, WHITE PF02

PORFOLIO, MATTE TILE

6” X 24" (152 X 610 MM)

4”X4”

PFT-1/PWT-2/PWB-1

DALTILE, ASH GREY PF05

PORTFOLIO, MATTE,

6” X 24”, 24”X 24” (152 X 610 MM)

4”X4”

PFT-1/PFT-2/PWT-2

PWT-1

GRT-1

GRT-2

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

LK-1

LYON

(LOCKERS)

77 STONE GRAY

4.75”x2.5”

STN-1

SF-1

SF-1

FIAT

TERRAZZO

WHITE PORTLAND

CEMENT WITH SHITE

CHIPS

4”x4”

Interior Finish Boards

Jacobs Engineer ing Group Inc.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman JFI Project No.: D3294203

Final Submission 10 May 2023

FG-1

MATS INC.

ADVANCED TRACK FOOT

GRILLES

ALUMINUM WITH NEW

YORK DARK GRAY INSERT

3”x3”

MAT-1

Comprehensive Interior Design Package

1.3 SID Documents

LIVING AREA

FIRE PUMP ROOM

SWITCH GEAR RM

BOILER DAY TANK

ROOM

MECH RM

RADIATOR

ROOM

GENERATOR

MECH RM

GENERATOR

AREA

OIL STORAGE RM

MECH/PLUMB

EXIT STAIR 1

HEMP VEST

ENTRANCE

VESTIBULE

HEMP VEST

HEMP CHASE

111C

HEMP HALLWAY

111B

INTR AREA

HEMP CHASE

111A

INTR AREA

INTR AREA

EXIT

STAIR #2

TELECOM RM

SLEEPING

RM 1

SLEEPING

RM2

RESTROOM

LAUNDRY

ROOM

BATH RM

HALLWAY

OPEN AREA

OPEN AREA

INTR AREA

HEMP

VESTIBULE

OPEN AREA

MAINTENANCE/TOOL

STORAGE

GARAGE

CG-1

CG-1

CG-1

CG-1

CG-1

HEMP VEST

HEMP VEST

INTR AREA

1. ALL FINISHES TO BE INSTALLED AND/OR APPLIED IN ACCORDANCE WITH THE MANUFACTURERS' WRITTEN INSTRUCTIONS.

2. REFER TO CID PACKAGE FOR FINISH SAMPLES. REFER TO SHEET I-601 FOR INTERIOR FINISH MATERIAL LEGEND, MATERIAL

INFORMATION AND FINISH ABBREVIATIONS.

3. REFER TO SHEET A-611 ROOM FINISH SCHEDULE FOR FULL FINISH APPLICATION.

4. REFER TO A-105 AND A-106 REFLECTED CEILING PLANS FOR CEILING HEIGHTS AND ADDITIONAL CEILING INFORMATION.

5. REFER TO CID PACKAGE FOR FINISH SAMPLES AND PRODUCT INFORMATION.

6. FLOOR TRANSITIONS BETWEEN ROOMS TO OCCUR AT CENTERLINE OF DOOR UNLESS OTHERWISE NOTED.

TRANSITIONS ARE NOT REQUIRED BETWEEN MATERIALS OF SAME THICKNESS.

7. WALLS TO RECEIVE WALL BASE RB-1 UNLESS OTHERWISE NOTED.

8. FIELD VERIFY DIMENSIONS PRIOR TO ORDERING FINISHES.

9. REFER TO MANUFACTURER'S RECOMMENDATIONS FOR INSTALLATION INSTRUCTIONS FOR ALL FINISHES. PREP ALL

SURFACES AS REQUIRED.

GENERAL NOTES CEILING

ACT ACOUSTICAL CEILING TILE

EXP EXPOSED TO STRUCTURE ABOVE

PT GYPSUM BOARD - PAINTED

BASE

PTB PORCELAIN TILE BASE

RB RUBBER BASE

FLOOR

CPT CARPET TILE

LVT LUXURY VINYL TILE

MAT RECESSED ENTRY MAT

PFT PORCELAIN TILE

SC SEALED CONCRETE

SF SHOWER FLOOR PAN

WALL

CG CORNER GUARD

PT PAINT

PWT PORCELAIN TILE

FINISH PLAN SYMBOLS

CORNER GUARD TAG

CPT-1 CARPET TILE

FLOOR FINISH LEGEND

MAT-1 ENTRANCE MAT

LVT-1 LUXURY VINYL TILE

RST-1 RESILIENT STAIR TREAD/RISER

SC-1 SEALED CONCRETE

PFT-1 PORCELAIN TILE

SF-1 SHOWER FLOOR PAN

PFT-2 PORCELAIN TILE

N

TRUE NORTH

WIND

PLAN NORTH

0 5,000MM 10,000MM

SCALE 1:100 (MILLIMETERS)

KEY PLAN

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349152

I-101

F

IR

S T

F L

O O

R F

IN

IS

H P

L A

N

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

1 : 100B1

FIRST FLOOR FINISH PLAN

DN

SWITCH GEAR

ROOM

CORRIDOR 1

CONTROL ROOM

CORRIDOR 2

UNISEX TLT

BREAK RM

HEMP VEST

STAIR #1

INERGEN TANK

AREA

STAIR #2

EXTERIOR LOAD

BANK ROOM

ELECTRICAL

EQUIPMENT

ROOM

OPEN TO BELOW

RADIATOR ROOM

CG-1 CG-1

CG-1

CG-1

CG-1

1. ALL FINISHES TO BE INSTALLED AND/OR APPLIED IN ACCORDANCE WITH THE MANUFACTURERS' WRITTEN INSTRUCTIONS.

2. REFER TO CID PACKAGE FOR FINISH SAMPLES. REFER TO SHEET I-601 FOR INTERIOR FINISH MATERIAL LEGEND, MATERIAL

INFORMATION AND FINISH ABBREVIATIONS.

3. REFER TO SHEET A-611 ROOM FINISH SCHEDULE FOR FULL FINISH APPLICATION.

4. REFER TO A-105 AND A-106 REFLECTED CEILING PLANS FOR CEILING HEIGHTS AND ADDITIONAL CEILING INFORMATION.

5. REFER TO CID PACKAGE FOR FINISH SAMPLES AND PRODUCT INFORMATION.

6. FLOOR TRANSITIONS BETWEEN ROOMS TO OCCUR AT CENTERLINE OF DOOR UNLESS OTHERWISE NOTED.

TRANSITIONS ARE NOT REQUIRED BETWEEN MATERIALS OF SAME THICKNESS.

7. WALLS TO RECEIVE WALL BASE RB-1 UNLESS OTHERWISE NOTED.

8. FIELD VERIFY DIMENSIONS PRIOR TO ORDERING FINISHES.

9. REFER TO MANUFACTURER'S RECOMMENDATIONS FOR INSTALLATION INSTRUCTIONS FOR ALL FINISHES. PREP ALL

SURFACES AS REQUIRED.

GENERAL NOTES CEILING

ACT ACOUSTICAL CEILING TILE

EXP EXPOSED TO STRUCTURE ABOVE

PT GYPSUM BOARD - PAINTED

BASE

PTB PORCELAIN TILE BASE

RB RUBBER BASE

FLOOR

CPT CARPET TILE

LVT LUXURY VINYL TILE

MAT RECESSED ENTRY MAT

PFT PORCELAIN TILE

SC SEALED CONCRETE

SF SHOWER FLOOR PAN

WALL

CG CORNER GUARD

PT PAINT

PWT PORCELAIN TILE

FINISH PLAN SYMBOLS

CORNER GUARD TAG

CPT-1 CARPET TILE

FLOOR FINISH LEGEND

MAT-1 ENTRANCE MAT

LVT-1 LUXURY VINYL TILE

RST-1 RESILIENT STAIR TREAD/RISER

SC-1 SEALED CONCRETE

PFT-1 PORCELAIN TILE

SF-1 SHOWER FLOOR PAN

PFT-2 PORCELAIN TILE

N

TRUE NORTH

WIND

PLAN NORTH

0 5,000MM 10,000MM

SCALE 1:100 (MILLIMETERS)

KEY PLAN

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349153

I-102

S E

C O

N D

F L

O O

R F

IN

IS

H P

L A

N

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

SECOND FLOOR FINISH PLAN

LIVING AREA

FIRE PUMP ROOM

102 OPEN AREA

SWITCH GEAR RM

BOILER DAY TANK

ROOM

115 MECH RM

RADIATOR

ROOM

GENERATOR

MECH RM

GENERATOR

AREA

OIL STORAGE RM

MECH/PLUMB

EXIT STAIR 1

HEMP VEST

SIGN-07

ENTRANCE

VESTIBULE

SIGN-05

SIGN-06

SIGN-08 SIGN-09

SIGN-10

SIGN-01A

SIGN-02

SIGN-15

SIGN-19

SIGN-22

SIGN-30

SIGN-31

SIGN-32

SIGN-34

SIGN-35

SIGN-36

SIGN-37

SIGN-31A

SIGN-01B

HEMP VEST

SIGN-38

SIGN-03

EXIT

STAIR #2

SIGN-31B

SIGN-35A

SIGN-27A

SIGN-22A

SLEEPING

RM 1

SLEEPING

RM2

BATH RM

RESTROOM

OPEN AREA

TELECOM RM

HALLWAY

LAUNDRY

ROOM

BATH RM

SIGN-04

SIGN-01

HEMP

VESTIBULE

SIGN-23

MAINTENANCE/TOOL

STORAGE

SIGN-18

GARAGE

OPEN AREA

SIGN-33A

SIGN-17

SIGN-29A

SIGN-16

SIGN-34A

SIGN-21

SIGN-20

HEMP VEST

HEMP VEST

SIGN-24 SIGN-28

SIGN-29

SIGN-29B

SIGN-29C

SIGN-25

SIGN-26

N

TRUE NORTH

WIND

PLAN NORTH

0 5,000MM 10,000MM

SCALE 1:100 (MILLIMETERS)

KEY PLAN

1. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

2. REFER TO SHEE I-602 FOR SIGNAGE SCHEDULE.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349154

I-103

F

IR

S T

F L

O O

R S

IG

N

A G

E P

L A

N

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

FIRST FLOOR SIGNAGE PLAN

ROOM

CORRIDOR 1

CONTROL ROOM

CORRIDOR 2

UNISEX TLT

BREAK RM

HEMP VEST

STAIR #2

STAIR #1

INERGEN TANK

AREA

SIGN-41

SIGN-42

SIGN-44

EXTERIOR LOAD

BANK ROOM

SIGN-40

SIGN-43

SIGN-48

SIGN-49

SIGN-47

SIGN-45

ELECTRICAL

EQUIPMENT

ROOM

SIGN-50

N

TRUE NORTH

WIND

PLAN NORTH

0 5,000MM 10,000MM

SCALE 1:100 (MILLIMETERS)

KEY PLAN

1. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

2. REFER TO SHEE I-602 FOR SIGNAGE SCHEDULE.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349155

I-104

S E

C O

N D

F L

O O

R S

IG

N

A G

E P

L A

N

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

SECOND FLOOR SIGNAGE PLAN

I-201F8

F1

F6

F3

UNISEX TLT

1. REFER TO SHEET I-601 FOR INTERIOR FINISH MATERIAL LEGEND, MATERIAL INFORMATION AND FINISH ABBREVIATIONS.

2. REFER TO SHEET A-611 ROOM FINISH SCHEDULE FOR FULL FINISH APPLICATION.

3. REFER TO CID PACKAGE FOR FINISH SAMPLES AND PRODUCT INFORMATION.

4. FIELD VERIFY ALL DIMENSIONS PRIOR TO ORDERING FINISHES.

5. REFER TO MANUFACTURER'S RECOMMENDATIONS FOR INSTALLATION INSTRUCTIONS FOR ALL FINISHES. PREP ALL

SURFACES AS REQUIRED.

6. PLUMBING FIXTURES AND TOILET ACCESSORIES ARE SHOWN FOR REFERENCE ONLY. REFER TO ARCHITECTURE AND

PLUMBING DRAWINGS FOR DETAILS.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349158

I-201

IN

T

E R

IO

R

S E

N L

A R

G E

D P

L A

N S

A N

D E

L E

V A

T

IO

N S

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

1 : 25D1

BREAK AREA ELEVATION

1 : 25D6

ENLARGED UNISEX TOILET

1 : 25D3

BREAK ROOM 2ND FLOOR ELEVATION

PORCELAIN FLOOR TILE - PFT-1

RANGE - RG1

SOLID SURFACE COUNTERTOP - SSM-1. REFER TO ARCHITECTURE FOR

DETAILS.

MICROWAVE - MW1

COFFEEMAKER - CM1

9 PAINT - PT-2

REFRIGERATOR - RF110

11 REFRIGERATOR - RF2

WALL TILE, PWT-1 - INSTALLED WITH 1/3 OFFSET (FIELD TILE)

PAINT - PT-3

INSTALL METAL TRIM PIECE AT ALL OUTSIDE TILE CORNERS AND TOP OF

TILE WAINSCOT: SCHLUTER JOLLY, OR EQUAL WITH ANODIZED ALUMINUM

FINISH.

PLASTIC LAMINATE - PLAM-1

WALL TILE, PWT-2 - INSTALLED WITH 1/3 OFFSET (ONE ROW OF TILE)

1 : 25F3

UNISEX TLT 203 - SOUTH ELEVATION

1 : 25F6

UNISEX TLT 203 - EAST ELEVATION

1 : 25F1

UNISEX TLT 203 - NORTH ELEVATION

1 : 25F8

UNISEX TLT 203 - WEST ELEVATION

PAINT DOOR FRAMES/TRIM - PT-515

STAIN DOOR - STN-116

BATH RM

RESTROOM

I-202F1

F8

F6

F3

I-202B8

B4

B6

I-202D1

D3

D6

D8

1. REFER TO SHEET I-601 FOR INTERIOR FINISH MATERIAL LEGEND, MATERIAL INFORMATION AND FINISH ABBREVIATIONS.

2. REFER TO SHEET A-611 ROOM FINISH SCHEDULE FOR FULL FINISH APPLICATION.

3. REFER TO CID PACKAGE FOR FINISH SAMPLES AND PRODUCT INFORMATION.

4. FIELD VERIFY ALL DIMENSIONS PRIOR TO ORDERING FINISHES.

5. REFER TO MANUFACTURER'S RECOMMENDATIONS FOR INSTALLATION INSTRUCTIONS FOR ALL FINISHES. PREP ALL

SURFACES AS REQUIRED.

6. PLUMBING FIXTURES AND TOILET ACCESSORIES ARE SHOWN FOR REFERENCE ONLY. REFER TO ARCHITECTURE AND

PLUMBING DRAWINGS FOR DETAILS.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349159

I-202

IN

T

E R

IO

R

S E

N L

A R

G E

D P

L A

N S

A N

D E

L E

V A

T

IO

N S

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

1 : 25B1

ENLARGED RESTROOM FLOOR PATTERN PLAN

PORCELAIN FLOOR TILE - PFT-1

PORCELAIN FLOOR TILE (SHOWER AREA) - PFT-2

SHOWER FLOOR PAN - SF-1

PORCELAIN WALL BASE - PWB-1

1 : 25D3

BATH RM 127 - NORTH ELEVATION

1 : 25D6

BATH RM 127 - EAST ELEVATION

1 : 25D8

BATH RM 127 - SOUTH ELEVATION

1 : 25D1

BATH RM 127 - WEST ELEVATION

1 : 25B4

SHOWER 127 - NORTH ELEVATION

1 : 25B6

SHOWER 127 - SOUTH ELEVATION

1 : 25B8

SHOWER 127 - WEST ELEVATION

1 : 25F1

RESTROOM 129 - WEST ELEVATION

1 : 25F3

RESTROOM 129 - SOUTH ELEVATION

1 : 25F8

RESTROOM 129 - NORTH ELEVATION

1 : 25F6

RESTROOM 129 - EAST ELEVATION

WALL TILE, PWT-1 - INSTALLED WITH 1/3 OFFSET (FIELD TILE)

WALL TILE, PWT-2 - INSTALLED WITH 1/3 OFFSET (ONE ROW OF TILE)

3 9

9 SHOWER CURTAIN (SHOWN FOR REFERENCE ONLY; NOT SPECIFIED)

REFRIGERATOR - RF110

11 REFRIGERATOR - RF2

PAINT - PT-3

INSTALL METAL TRIM PIECE AT ALL OUTSIDE TILE CORNERS AND TOP OF

TILE WAINSCOT: SCHLUTER JOLLY, OR EQUAL WITH ANODIZED ALUMINUM

FINISH.

PAINT DOOR FRAMES/TRIM - PT-515

STAIN DOOR - STN-116

13 13

ROOM NUMBER: HELVETICA MEDIUM

37 MM (1-1/2") CAPITAL LETTER HEIGHT, FLUSH LEFT

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

MESSAGE: 152 MM X 229 MM (6" X 9") TYPEWRITTEN INSERT

UPPER AND LOWER CASE HELVETICA MEDIUM

12 MM (1/2") CAPITAL LETTER HEIGHT, FLUSH LEFT

BLACK LETTERS ON WHITE BACKGROUND

OFFICE

BASE SUPPLY

(BRAILLE)

HEADING: UPPER AND LOWER CASE HELVETICA MEDIUM

37 MM (1-1/2") CAPITAL LETTER HEIGHT, FLUSH LEFT

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

SECONDARY HEADING: UPPER AND LOWER CASE HELVETICA MEDIUM

25 MM (1") CAPITAL LETTER HEIGHT, FLUSH LEFT

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

ROOM NAME/NUMBER: CHANGEABLE DIRECTORY TILES

UPPER AND LOWER CASE HELVETICA MEDIUM

12 MM (1/2") CAPITAL LETTER HEIGHT, FLUSH LEFT

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

NOTE: SIGNAGE WITH BASE NAME MUST BE VERIFIED BEFORE

FABRICATION AND INSTALLATION.

Telcom Room

Thule Air Base

3 2

Fire Pump Room

Mech/Plumbing

9Switch Gear Room

THULE J-PLANT

Control Room

ROOM NAME/NUMBER: UPPER CASE HELVETICA MEDIUM,

37 MM (1-1/2") CAPITAL LETTER HEIGHT, FLUSH LEFT

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

TENANT NAME: UPPER AND LOWER CASE HELVETICA MEDIUM

19 MM (3/4") CAPITAL LETTER HEIGHT, FLUSH LEFT

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

SECONDARY INFO: UPPER AND LOWER CASE HELVETICA REGULAR

19 MM (3/4") CAPITAL LETTER HEIGHT, FLUSH LEFT

WHITE LETTERS ON GLIDDEN FS 15095 BACKGROUND

19 19

3 mm (1/8") Rule, if Required

737 MM

(1-1/2"

CAPS)

37 MM

(1-1/2"

CAPS)

METAL SHOP

(BRAILLE)

TOILET

ROOM NAME/NUMBER: UPPER CASE HELVETICA MEDIUM

16 MM (5/8") CAPITAL LETTER HEIGHT, CENTERED

WHITE LETTERS ON SHERWIN WILLIAMS SW6249

BACKGROUND

SYMBOL: SHERWIN WILLIAMS SW6249 ON WHITE BACKGROUND

E Q

E Q

(CENTER OF DOOR)

ROOM NAME/NUMBER: HELVETICA MEDIUM

16 MM (5/8") CAPITAL LETTER HEIGHT, CENTERED

ACCOMPANYING GRADE TWO BRAILLE

WHITE LETTERS ON GLIDDEN FSC 15095 BACKGROUND

ELECTRICAL ROOM 1499 MM (4'-11") AFF

INTERNATIONAL

PICTOGRAM

SYMBOLS

INTERNATIONAL

PICTOGRAM

SYMBOLS

EVACUATION PLAN

TEXT TO READ:

"EVACUATION PLAN"

PROVIDE GRAPHIC OF

FLOOR PLAN

SHOWING

EVACUATION ROUTE

PER NFPA 101. REFER

TO LIFE SAFETY

PLANS FOR EGRESS

PATHS.

ABS COLORED

PLAQUE

SQUARE END

CAP

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349160

I-501

IN

T

E R

IO

R

D E

T A

IL

S

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

1 : 5C4

SIGNAGE BB2

1 : 5D4

SIGNAGE AA2

1 : 5D8

SIGNAGE BB1

1 : 5A1

SIGNAGE BB8

1 : 5A4

SIGNAGE U1

1 : 5C8

SIGN TYPE E1 -

EMERGENCY SHOWER & EYE WASH

1 : 5A8

SIGN TYPE F1 - EMERGENCY

EYE WASH

1 : 5D1

SIGN TYPE G1 - EVACUATION PLAN

1. FINISHES TO BE INSTALLED AND/OR APPLIED IN ACCORDANCE WITH THE MANUFACTURERS' WRITTEN INSTRUCTIONS. REFER TO CID PACKAGE FOR FINISH SAMPLES AND WINDOW

TREATMENT DETAILS.

2. WHERE COLOR IS SHOWN AS BEING SPECIFIC TO ONE MANUFACTURER, AND EQUIVALENT COLOR BY ANOTHER MANUFACTURER MAY BE SUBMITTED FOR APPROVAL.

3. ALL BRANDS, AND MANUFACTURERS' PRODUCTS BEING INDICATED ARE FOR REFERENCE PURPOSES ONLY. ALL MANUFACTURERS' COLORS AND PATTERNS BEING INDICATED ARE FOR REFERENCE PURPOSES ONLY. THE REFERENCE USED ARE TO INDICATE THE PROJECT'S NEEDS AND ARE NOT INTENTED TO LIMIT THE SELECTION OF OTHER MANUFACTURERS' PRODUCTS MEETING THE SALIENT CHARACTERISTICS OR PERFORMANCE REQUIREMENTS OF THE CITED MATERIAL OR EQUIPMENT.

4. FIELD VERIFY ALL DIMENSIONS PRIOR TO ORDERING FINISHES.

5. REDUCER STRIPS SHALL MATCH COLOR OF BASE.

6. GYP BOARD WALLS TO BE PAINTED EGGSHELL FINISH, UNLESS OTHERWISE NOTED. ALL GYP BOARD CEILINGS TO BE PAINTED FLAT FINISH, UNLESS OTHERWISE NOTED.

7. DOORS, FRAMES AND HANDRAILS TO BE PAINTED SEMI-GLOSS FINISH, UNLESS OTHERWISE NOTED.

8. PAINT SHALL NOT COVER DOOR HARDWARE, ACCESSORIES, FIRE RATING LABELS OR OTHER CODE REQUIRED LABEL PLATES.

9. REFER TO SHEET A-604 FOR THE ROOM FINISH SCHEDULE.

10. PROVIDE SILICONE, MAPESIT T (OR EQUIVALENT) IN JOINTS WHERE PORCELAIN WALL AND FLOOR TILE MEET.

11. HEMP SHIELD PLATES - BOTH INTERIOR AND EXTERIOR OF THE HEMP ENCLOSURE - AND HEMP SUPPORT STEEL AND ALL STRUCTURAL STEEL MEMBERS ARE TO BE PAINTED WITH

SPECIFIED PAINT SYSTEM.

12. APPLY EPOXY COATING TO ALL SEALED CONCRETE FLOORS.

GENERAL NOTES

ACT ACOUSTICAL CEILING TILE

CG CORNER GUARD

CPT CARPET TILE

GRT GROUT

LVT LUXURY VINYL TILE

MAT RECESSED ENTRY MAT

PFT PORCELAIN TILE

PLAM PLASTIC LAMINATE

PT PAINT

PWT PORCELAIN WALL TILE

RB RUBBER BASE

RST RUBBER TREADS & RISERS

SC SEALED CONCRETE

SF SHOWER FLOOR PAN

SS SOLID SURFACE

STN DOOR STAIN FINISH

WT WINDOW TREATMENT

INTERIOR FINISH MATERIALS KEY

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349161

I-601

M A

T E

R

IA

L

W

IN

D O

W T

R E

A T

M E

N T

F

IN

IS

H

S C

H E

D U

L E

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

MATERIAL FINISH SCHEDULE

FINISH CODE SURFACE MATERIAL MANUFACTURER MODEL COLOR SIZE COMMENTS LOCATION

ACT-1 CEILING ACOUSTICAL CEILING TILE ARMSTRONG 1952 ULTIMA - LAY-IN, BEVELED TEGULAR, SUPRAFINE XL 14MM

EXPOSED TEE GRID SYSTEM

WHITE 610MM X 610MM, 14MM

GRID

CONTROL ROOM, BREAK ROOM & CORRIDOR 1

CG-1 WALLS CORNER GUARD CS ACROVYN C0-8, 5MM NOSE RADIUS GUARD STAINLESS STEEL (#4 SATIN

FINISH)

89MM X 89MM LEGS INSTALL FROM TOP OF BASE, FULL HEIGHT. LOCATIONS AS

NOTED ON FINISH PLANS.

CPT-1 FLOORING CARPET TILE TARKETT 03026, AFTERMATH II 23512 TAPESTRY 610MM X 610MM INSTALLATION: MONOLITHIC

GRT-1 FLOORS GROUT LATICRETE SANDED 24 NATURAL GREY USE ON FLOORS

GRT-2 WALLS GROUT LATICRETE UNSANDED 78 STERLING SILVER USE ON WALLS

LVT-1 FLOORING LUXURY VINYL TILE TARKETT STRIA MARBLE BRECCIA 152MM X 914MM LIVING, LAUNDRY & BREAKROOMS

MAT-1 FLOORING ENTRANCE FLOOR MAT MATS INC. FOOT GRILLS-ADVANCED TRACK GRILL ALUMINUM, CARPET: NEW

YORK, DARK GRAY

GRILLE & FRAME WITH DRAIN PAN @ ENTRANCE

PFT-1 FLOORING PORCELAIN FLOOR TILE DALTILE PORTFOLIO ASH GREY PF05 610MM X 610MM FLOOR

PFT-2 FLOORING PORCELAIN FLOOR TILE DALTILE PORTFOLIO ASH GREY PF05 51MM X 51MM FLOOR (SHOWER AREA)

PLAM-1 MILLWORK PLASTIC LAMINATE FORMICA MATTE FINISH 902-58 PLATINUM - LIVING AREA & BREAKROOM MILLWORK

PT-1 WALLS GENERAL WALL PAINT SHERWIN WILLIAMS PROMAR 200, EGGSHELL SW 6001 GRAYISH - EXPOSED CEILINGS & FIELD PAINT

PT-2 WALLS WALL PAINT SHERWIN WILLIAMS PROMAR 200, EGGSHELL SW 6002 ESSENTIAL GRAY - LIVING AREA & BREAKROOM

PT-3 WALLS WALL PAINT SHERWIN WILLIAMS PROMAR 200, EGGSHELL SW 7015 REPOSE GRAY - RESTROOMS, SLEEPING RMS

PT-4 CEILING (GYP. BD.) CEILING PAINT SHERWIN WILLIAMS PROMAR 200, FLAT SW 7004 SNOWBOUND - CEILING

PT-5 DOOR FRAMES, PAINTED

DOOR TRIM

DOOR FRAME/TRIM PAINT SHERWIN WILLIAMS PROMAR 200, SEMI GLOSS SW 6005 FOLKSTONE - DOORS & TRIM

PT-6 STAIR RAILINGS &

STRINGERS

STAIR RAILINGS/STRINGER

PAINT

SHERWIN WILLIAMS PROMAR 200, SEMI GLOSS SW 7019 GAUNTLET GRAY - RAILINGS & STRINGERS

PT-7 INTERIOR STAIR WALLS &

CEILINGS

INTERIOR STAIR PAINT SHERWIN WILLIAMS ALKYD ENAMEL SATIN SW 7015 REPOSE GRAY - INTERIOR STAIRS

PT-8 WALLS WALL PAINT SHERWIN WILLIAMS ALKYD ENAMEL SATIN SW 6002 ESSENTIAL GRAY MAINTENANCE/UTILITY SPACES

PT-9 HEMP WALLS & CEILINGS INTERIOR HEMP PAINT SHERWIN WILLIAMS PRO INDUSTRIAL ACRYLIC PAINT SW 7004 SNOWBOUND HEMP WALLS & CEILINGS

PWT-1 WALLS PORCELAIN WALL TILE DALTILE PORTFOLIO WHITE PF02 305MM X 610MM WALLS

PWT-2 WALLS PORCELAIN WALL TILE DALTILE PORTFOLIO ASH GREY PF05 305MM X 610MM WALLS

RB-1 WALLS RUBBER BASE ROPPE COVE BASE 194 BURNT UMBER 100MM HIGH FOR RESILIENT FLOORING AND AT SEALED CONCRETE

FLOORING

RB-2 WALLS RUBBER BASE ROPPE STRAIGHT BASE 194 BURNT UMBER 100MM HIGH FOR CARPET FLOORING

RST-1 STAIRS RUBBER TREADS & RISERS ROPPE HAMMERED TEXTURE TREAD WITH RISER 114 LUNAR DUST STAIR TREADS; RISERS AND LANDINGS

SC-1 FLOORING SEALED CONCRETE - - - GENERAL USE

SF-1 SHOWER FLOOR PAN TERRAZZO FIAT MONTEREY SHOWER FLOOR WHITE PORTLAND CEMENT WITH

WHITE CHIPS

914MM X 914MM SHOWER FLOOR PAN

SS-1 COUNTERTOPS SOLID SURFACE CORIAN - SAGEBRUSH BREAKROOM & LIVING AREA

STN-1 DOOR DOOR STAIN FINISH MASONITE ARCHITECTURAL - NUTMEG - FINISH ON BEECHWOOD

TS-1 TRANSITION STRIP TILE EDGING SCHLUTER SYSTEMS JOLLY, ANODIZED ALUMINUM TILE TO CONCRETE

TS-2 TRANISTION STRIP COVE SCHLUTER SYSTEMS DILEX-AHKA ANODOIZED ALUMINUM CARPET TO LVT & TILE TO LVT

TS-3 TRANSITION STRIP REDUCER ROPPE 1/16 OR 1/8" MATERIAL TO FLOOR -194 BURNT UMBER LVT TO CONCRETE

WINDOW TREATMENT SCHEDULE

ROOM NAME

ITEM

CODE DESCRIPTION & COUNT

LIVING AREA WT1 WINDOW TREATMENT- 1

CONTROL ROOM WT1 WINDOW TREATMENT- 3

1. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

2. SIGNAGE PLACEMENT TO MEET ADA REQUIREMENTS.

3. ALL SIGNAGE TO COMPLY WITH UFC 3-120-01 AIR FORCE SIGN STANDARD.

4. COORDINATE ALL SIGNAGE WITH CONTRACTING OFFICER PRIOR TO FABRICATION. FINAL TEXT ON SIGNS TO BE APPROVED BY END USER.

5. VERIFY REQUIREMENTS FOR ALL REGULATORY SIGNAGE WITH CONTRACTING OFFICER.

6. THE BASIS OF DESIGN FOR SIGNAGE IS ACCORD 12 MODULAR SIGN SYSTEM AS MANUFACTURED BY APCO. THE BASIS OF DESIGN IS NOT INTENDED TO LIMIT CHOICE OF THE MANUFACTURER FOR EQUAL COLOR/PATTERN AND CHANGEABLE MESSAGE CAPABILITY.

7. THE OVERALL SIZE OF EACH SIGN DEFINES THE GRAPHIC AREA AND DOES NOT INCLUDE THE FRAME AND TRIM. PROVIDE SNAP-IN SIGN MODULES OF INDICATED HEIGHT AND WIDTH WITH GRAPHICS AND FEATURES AS INDICATED. INCLUDE CLEAR SECTIONS TO

ACCOMMODATE LASER PRINTED CHANGEABLE MESSAGES.

8. ALL SIGNS TO BE FURNISHED WITH ALUMINUM SIDE TRACKS OR END CLIPS WITH RADIUS PROFILE IN CLEAR ANODIZED SATIN FINISH.

9. SIGNAGE WITH THE BASE NAME MUST BE VERIFIED BEFORE FABRICATION AND INSTALLATION.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349162

I-602

S

IG

N A

G E

S C

H E

D U

L E

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

SIGNAGE SCHEDULE

SIGN FLOOR LEVEL

ROOM

NUMBER ROOM NAME SIGN TYPE SIGN MESSAGE

SIGN-45 SECOND FLOOR 205 CONTROL ROOM TYPE BB2 TO BE DETERMINED

SIGN-47 SECOND FLOOR 208 HEMP VEST TYPE BB2 TO BE DETERMINED

SIGN-48 SECOND FLOOR 209 CORRIDOR 2 TYPE BB2 TO BE DETERMINED

SIGN-49 SECOND FLOOR 213 ELECTRICAL

EQUIPMENT ROOM

TYPE BB2 TO BE DETERMINED

SIGN-50 SECOND FLOOR 210 STAIR #2 TYPE BB2 TO BE DETERMINED

SIGNAGE SCHEDULE

SIGN FLOOR LEVEL

ROOM

NUMBER ROOM NAME SIGN TYPE SIGN MESSAGE

SIGN-01 FIRST FLOOR 101 ENTRANCE

VESTIBULE

TYPE BB1 TO BE DETERMINED

SIGN-01A FIRST FLOOR 101 VESTIBULE TYPE AA2 TO BE DETERMINED

SIGN-01B FIRST FLOOR 103 OPEN AREA TYPE BB2 TO BE DETERMINED

SIGN-02 FIRST FLOOR 102 FIRE PUMP ROOM TYPE U1 TO BE DETERMINED

SIGN-03 FIRST FLOOR 102 FIRE PUMP ROOM TYPE U1 TO BE DETERMINED

SIGN-04 FIRST FLOOR 121 LIVING AREA TYPE BB2 TO BE DETERMINED

SIGN-05 FIRST FLOOR 104 ENTRANCE TYPE BB2 TO BE DETERMINED

SIGN-06 FIRST FLOOR 119 MECH/PLUMB TYPE U1 TO BE DETERMINED

SIGN-07 FIRST FLOOR 121 LIVING AREA TYPE BB2 TO BE DETERMINED

SIGN-08 FIRST FLOOR 122 SLEEPING RM 1 TYPE BB2 TO BE DETERMINED

SIGN-09 FIRST FLOOR 123 SLEEPING RM 2 TYPE BB2 TO BE DETERMINED

SIGN-10 FIRST FLOOR 126 LAUNDRY ROOM TYPE BB2 TO BE DETERMINED

SIGN-15 FIRST FLOOR 104 OPEN AREA TYPE BB1 TO BE DETERMINED

SIGN-16 FIRST FLOOR 104 OPEN AREA TYPE BB2 TO BE DETERMINED

SIGN-17 FIRST FLOOR 105 MAINTENANCE/TOO

L STORAGE

TYPE BB2 TO BE DETERMINED

SIGN-18 FIRST FLOOR 106 GARAGE/STORAGE TYPE BB2 TO BE DETERMINED

SIGN-19 FIRST FLOOR 107 OIL STORAGE RM TYPE U1 TO BE DETERMINED

SIGN-20 FIRST FLOOR 107 OIL STORAGE RM TYPE U1 TO BE DETERMINED

SIGN-21 FIRST FLOOR 106 GARAGE TYPE U1 TO BE DETERMINED

SIGN-22 FIRST FLOOR 108 GENERATOR AREA TYPE U1 TO BE DETERMINED

SIGN-22A FIRST FLOOR 108 EMERGENCY EYE

WASH STATION

TYPE F1 TO BE DETERMINED

SIGN-23 FIRST FLOOR 110 HEMP VEST TYPE BB2 TO BE DETERMINED

SIGN-24 FIRST FLOOR 113 EXIT STAIR 2 TYPE BB2 TO BE DETERMINED

SIGN-25 FIRST FLOOR 113 EXIT STAIR 2 TYPE BB2 TO BE DETERMINED

SIGN-26 FIRST FLOOR 114 MECH RM TYPE U1 TO BE DETERMINED

SIGN-27A FIRST FLOOR 108 EMERGENCY EYE

WASH STATION

TYPE F1 TO BE DETERMINED

SIGN-28 FIRST FLOOR 112 RADIATOR ROOM TYPE U1 TO BE DETERMINED

SIGN-29 FIRST FLOOR 111 GENERATOR MECH

RM

TYPE U1 TO BE DETERMINED

SIGN-29A FIRST FLOOR 112 RADIATOR ROOM TYPE U1 TO BE DETERMINED

SIGN-29B FIRST FLOOR 145 ROOM 145 TYPE U1 TO BE DETERMINED

SIGN-29C FIRST FLOOR 146 ROOM 146 TYPE U1 TO BE DETERMINED

SIGN-30 FIRST FLOOR 114B HEMP HALLWAY TYPE BB2 TO BE DETERMINED

SIGN-31 FIRST FLOOR 115 BOILER DAY TANK

ROOM

TYPE U1 TO BE DETERMINED

SIGN-31A FIRST FLOOR 115 BOILER DAY TANK

ROOM

TYPE U1 TO BE DETERMINED

SIGN-31B FIRST FLOOR 114 EMERGENCY EYE

WASH STATION

TYPE F1 TO BE DETERMINED

SIGN-32 FIRST FLOOR 114 MECH RM TYPE U1 TO BE DETERMINED

SIGN-33A FIRST FLOOR 113 EXIT STAIR 2 TYPE BB2 TO BE DETERMINED

SIGN-34 FIRST FLOOR 118 HEMP VEST TYPE BB2 TO BE DETERMINED

SIGN-34A FIRST FLOOR 118 HEMP VEST TYPE BB2 TO BE DETERMINED

SIGN-35 FIRST FLOOR 117 EXIT STAIR 1 TYPE BB2 TO BE DETERMINED

SIGN-35A FIRST FLOOR 116 SWITCH GEAR RM TYPE E1 TO BE DETERMINED

SIGN-36 FIRST FLOOR 108 GENERATOR AREA TYPE BB2 TO BE DETERMINED

SIGN-37 FIRST FLOOR 130 TELECOM RM TYPE U1 TO BE DETERMINED

SIGN-38 FIRST FLOOR 109 HEMP VEST TYPE BB2 TO BE DETERMINED

SIGN-41 SECOND FLOOR 201 SWITCH GEAR

ROOM

TYPE BB2 TO BE DETERMINED

SIGN-41 SECOND FLOOR 202 STAIR #1 TYPE BB2 TO BE DETERMINED

SIGN-42 SECOND FLOOR 201 SWITCH GEAR

ROOM

TYPE BB2 TO BE DETERMINED

SIGN-43 SECOND FLOOR 212 LOAD BANK ROOM TYPE BB2 TO BE DETERMINED

SIGN-44 SECOND FLOOR 205 CONTROL ROOM TYPE BB2 TO BE DETERMINED

1. SOLID SURFACE COUNTERS TO RECEIVE SS-1 4" BACKSPLASH AND SIDESPLASH WHERE CABINETS ARE AGAINST THE WALL.

2. REFER TO SHEET I-601 FOR MATERIAL FINISH SCHEDULE.

3. ALL HEMP SHIELD PLATES - BOTH INTERIOR AND EXTERIOR OF THE HEMP ENCLOSURE - AND HEMP SUPPORT STEEL AND ALL STRUCTURAL STEEL MEMBERS ARE TO BE

PAINTED WITH SPECIFIED PAINT SYSTEM.

GENERAL NOTES

US Army Corps of Engineers ®

SHEET OF

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

DISTRIBUTION OF THESE DRAWING IS SUBJECT TO THE LIMITATIONS STATED ON THE COVER SHEET.

349163

I-603

IN

T

E R

IO

R

F

IN

IS

H

S C

H E

D U

L E

T H

U L

E A

B

G R

E E

N L

A N

D

F E

D E

R A

L P

L A

Z A

N E

W Y

O R

K

N Y

A B

O W

M A

N

A B

O W

M A

N

K

C H

A R

B O

N E

A U

M A

Y

--F

IR

S T

T

IT

L E

S E

C O

N D

T

IT

L E

FINAL SUBMISSION

R E

P A

IR

B

M E

W S

P O

W E

R

J

P L

A N

T B

N E

W Y

O R

K D

IS

T

R

IC

T

INTERIOR FINISH SCHEDULE

ROOM

NO ROOM NAME

WALL FINISH BASE FLOOR CEILING

NOTES & REMARKS (SEE NOTES)NORTH EAST SOUTH WEST FINISH MAT. FIN.

101 VESTIBULE PT-1 PT-1 PT-1 PT-1 - CONC MAT-1 EXP/PT-1

102 FIRE PUMP ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

103 HALLWAY PT-1 PT-1 PT-1 PT-1 RB-1 CONC SC-1 EXP/PT-1

104 OPEN PT-1 PT-1 PT-1 PT-1 RB-1 CONC SC-1 EXP/PT-1

105 MAINTENANCE/TOOL STORAGE PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

106 GARAGE/STORAGE PT-1 PT-1 PT-1 PT-1 RB-1 CONC SC-1 EXP/PT-1

108 GENERATOR AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

109 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

110 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

111 GENERATOR MECH RM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

111A HEMP CHASE PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

111B HEMP HALLWAY - PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

111C HEMP CHASE PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

112 RADIATOR ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

113 EXIT STAIR 2 PT-7 PT-7 PT-7 PT-7 RB-1 CONC RST-1 PT-7

114 MECH RM PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

115 BOILER DAY TANK ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 PT-1

116 SWITCH GEAR ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

117 EXIT STAIR 1 PT-7 PT-7 PT-7 PT-7 RB-1 CONC RST-1 PT-7

118 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

119 MECH/PLUMB PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

121 LIVING AREA PT-2 PT-2 PT-2 PT-2 RB-1 CONC LVT-1 PT-4

122 SLEEPING RM 1 PT-3 PT-3 PT-3 PT-3 RB-2 CONC CPT-1 PT-4

123 SLEEPING RM 2 PT-3 PT-3 PT-3 PT-3 RB-2 CONC CPT-1 PT-4

124 HALLWAY PT-2 PT-2 PT-2 - RB-1 CONC LVT-1 PT-4

126 LAUNDRY ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC LVT-1 PT-4

127 BATH RM PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-

PWB-1 CONC PFT-1 PT-4

128 SHOWER PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-

PWB-1 CONC PFT-2/SF-1 PT-4

129 TOILET RM PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-

PWB-1 CONC PFT-1 PT-4

130 TELECOM RM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 PT-4

131 INTR AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

132 INTR AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

133 INTR AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

134 INTR AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

145 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

146 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

201 SWITCH GEAR ROOM PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

202 STAIR #1 PT-7 PT-7 PT-7 PT-7 RB-1 CONC RST-1 PT-7

203 UNISEX TOILET PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-2 PT-3/PWT-1/PWT-

PWB-1 CONC PFT-1 PT-4

204 BREAK RM PT-2 PT-2 PT-2 PT-2 RB-1 CONC LVT-1 ACT-1

205 CONTROL ROOM PT-2 PT-2 PT-2 PT-2 RB-1 CONC SC-1 ACT-1

206 INERGEN TANK AREA PT-8 PT-8 PT-8 PT-8 RB-1 CONC SC-1 EXP/PT-1

207 CORRIDOR 1 PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

208 HEMP VEST PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

209 CORRIDOR 2 PT-1 PT-1 PT-1 PT-1 RB-1 CONC SC-1 EXP/PT-1

210 STAIR #2 PT-7 PT-7 PT-7 PT-7 RB-1 CONC RST-1 PT-7

212 EXTERIOR LOAD BANK ROOM PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

213 ELECTRICAL EQUIPMENT ROOM PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

214 RADIATOR ROOM PT-9 PT-9 PT-9 PT-9 RB-1 CONC SC-1 PT-9 HEMP FINISH

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

2.1 FF&E Design Objectives

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

Furniture, Fixtures & Equipment (FF&E) Design Objectives

FF&E DESIGN OBJECTIVES

The repair of the BMEWS Building 4016 (J-Plant), Greenland consists of Switch Gear, Generator and maintenance spaces and the living quarter area. The interior of the building will create a look and feel that is of the quality and durability associated with all Air Force facilities. The atmosphere will be comfortable, yet classic in its appearance and will portray the pride of its occupants and users.

Furniture and furnishings are primarily on the 1st level. The furniture includes a dining table and chairs in the living area, beds and nightstands in the sleeping rooms and sofa with occasional table in the living areas.

The sofa and dining chairs will have seat pads with durable fabrics that have passed rigorous testing in accent colors to provide a long-lasting look and feel to the seating in the living quarters. The chairs for the living area will be a lightweight stackable chair that will provide ease of movement. Table and chair legs will be smooth gliding to assure the flooring surfaces stay free of marks and scratches. The table surfaces for the living area will be durable plastic laminates in warm colors.

The sleeping room furniture will be durable, cleanable, structurally reinforced with secure floor anchoring mechanisms. A preference for materials with recycled content will be exercised in the furniture selection.

The overall look, feel and lasting durability of building 4016 will be one the occupants will be proud of for many years to come.

Comprehensive Interior Design Package Final Submission

10 May 2023

Proj. No. D3294203

2.2 FF&E Order Forms

Furniture, Fixtures, Equipment

(FF&E) Order Form

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: BD1 Bed

Item Description Item Image

Dimensions: 978w x 2191d x 1829h mm

(38.5"w x 86.25"d x 72"h)

Finishes: Frame Paint: Ebony

Laminate: Wild Cherry

Salient Features:

high-pressure laminate top surfaces

HPL tops and drawer fronts are attached with steel to steel connections for strength and durability.

Headboard: 45 lb density M3 grade particle boad with *Image not exact. Refer to salient features*

HPL surface and 2mm PVC edge

Deck and body: 18 gauge

Gussets: 13 gauge

Weight capacity: 800 lbs.

Warranty: 10 Yeatrs

GSA Information

SIN#: 337121H

Location & Quantity

Location: Qty: Location: Qty:

122 Sleeping Rm 1 1

123 Sleeping Rm 2 1

TOTAL: 2

Bed constructed of institutional grade steel with

Laminate:

S-2: Wild Cherry

Frame Paint:

S-1: Ebony

Proj. No. : D3294203

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: CH1 Dining Chair

Item Description Item Image

Dimensions: 603w x 527d x 775h mm

(20.75"w x 20.75"d x 30.5"h)

Finishes

Back Shell: White

Seat Pad: Ice Blue

Salient Features:

Upholstered stacking side chair

Four leg base

Stacks 6 units high

Steel tubing base & frame

Polypropylene seat and back *Image not exact. Refer to salient features*

Polypropylene seat insert

Felt glides

Weight capacity: 250 lbs

S-3: White Gloss

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications.

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications.

Warranty - Frame and Mechanism: Min. 10 years

Upholstery: Minimum 3 years

GSA Information

SIN#: 33721

Location & Quantity

Location: Qty: Location: Qty:

121 Living Area 4

TOTAL: 4

Back Shell:

S-4: White

Seat Insert:

S-5: Ice Blue

Frame Paint: White Gloss

Frame Paint:

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: CH2 Sofa

Item Description Item Image

Dimensions: 781w x 1797d x 813h mm

(30.75"w x 70.75"d x 32"h)

Finishes: Upholstery: Midnight Blue with warp horizontal pattern

Legs: Maple

Salient Features:

Frame: Unibody construction with finger jointed plywood

Legs: maple

Upholstery: multiple densities of polyurethane foam

Double needle stitch on seams *Image not exact. Refer to salient features*

Polypropylene seat and back

Upholstered - 100,000 double rubs (Wyzenbeek)

Upholstery:

warp horizontal pattern

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications.

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications.

Warranty - Frame and Mechanism: Min. 10 years

Upholstery: Minimum 3 years

GSA Information

SIN#: 33721

Location & Quantity

Location: Qty: Location: Qty:

121 Living Area 1

TOTAL: 1

Legs:

S-7: Maple

S-6: Midnight Blue with

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: CH3 Task Chair

Item Description Item Image

Dimensions: 724w x 470d x 946-1067 mm

(28.5"w x 18.5"d x 37.25-42"h)

Finishes

Graphite

Salient Features:

5" pneumatic seat-height adjustment

Frame, seat shell, and five-arm plastic base: black

64mm seat depth adjustment

Rectilinear height, width-, pivot and depth-adjustable arms *Image not exact. Refer to salient features*

Adjustable lumbar

3D Knit on back

64mm diameter, hard-compostion,dual-wheel

Soft casters (for hard floors): black

Weight capacity: 400 lbs

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications.

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications.

Warranty - Frame and Mechanism: Min. 10 years

Upholstery: Minimum 3 years

GSA Information

SIN#: 33721

Location & Quantity

Location: Qty: Location: Qty:

205 Control Room 1

TOTAL: 1

Frame Paint: Black

Frame Paint:

Back Knit:

S-9: Graphite

Seat Upholstery:

S-10: Graphite

Seat Upholstery: Mesh, Back: 3D Knit, Graphite

S-8: Black

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: DK1 Control Desk

Item Description Item Image

Dimensions: 1778w x 737d x 720-1200h mm

(70"w x 29"d x 28 - 47"h)

Finishes: Top (HPL) Finish: Clear Oak

Base Frame: Black

Plastic Edge: To match

Salient Features:

Plastic laminate (HPL) rectangular worksurface

Adjustable height and simple touch controller

Laminate top: 23.7 mm thick, 31.8mm radius corner

T-mold edge band and grommet for cable management *Image not exact. Refer to salient features*

Base frame: steel tubing and base: paint

Glides: non-skid

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications.

Warranty : Limited Warranty

GSA Information

SIN#: 33721

Location & Quantity

Location: Qty: Location: Qty:

205 Control Room 1

TOTAL: 1

laminate top

Top (HPL) Finish:

S-11: Clear Oak

Base Frame:

S-12: Black

Repair BMEWS Bldg 4016 (J-Plant)

Thule Air Base, Greenland

Comprehensive Interior Design Package

Final Submission

10 May 2023

Code & Item Name: NS1 Nightstand

Item Description Item Image

Dimensions: 521w x 508d x 635h mm

(20.5"w x 20"d x 25"h)

Finishes: Frame Paint: Ebony

Laminate: Wild Cherry

Salient Features:

Steel nightstand with non-removable drawers

Dra…