OC1 BCS-WS-CS-DT-300.pdf
PDF 465 KB Posted
- Attached to
- Boone AASF Modernize Lighting
- Solicitation number
- 582-RFB-2490-2026
- Issued by
- Buchanan County, Iowa
About this file
This is a Request for Bids (RFB Number 582-RFB-2490-2026) issued by the Iowa Department of Public Defense (DPD) for professional services to perform a comprehensive LED retrofit at the Boone Army Aviation Support Facility (AASF) located at 700 Corporal Sneeden Drive, Boone, Iowa. The project encompasses the complete modernization of lighting systems across 34,185 square feet, including removal of existing non-LED light fixtures and installation of energy-efficient LED fixtures throughout the facility, exterior wall packs, and display lighting. The scope of work incorporates advanced lighting controls such as office occupancy sensors, dimmer switches, and photocell devices designed to maximize energy savings and optimize lighting performance. A mandatory pre-bid walkthrough is scheduled for Thursday, February 12, 2026, at 9:00 AM, with RSVP required to issuing officer Philip Payton (515-975-6211, philip.payton@dpd.iowa.gov). Sealed bids must be submitted as a lump sum amount and are due by March 5, 2026, at 2:00 PM CST.
All bids must be submitted in the items section as a lump sum amount. The solicitation documentation does not specify set-aside designations or restrictions limiting participation to disadvantaged enterprises or particular organizational categories, indicating the procurement is open to qualified bidders. No incumbent vendors or current contractors are identified in the available materials. The project is funded through the Iowa DPD, though the specific award value or budget range is not disclosed. Bidders must agree to payment terms allowing the State of Iowa sixty days from invoice submission to process payment, as specified in Iowa Code 8A.514. Bidders must also certify their bids, authorize release of information, acknowledge federal terms and conditions, and meet specified insurance requirements. The RFB includes sixteen attachments providing detailed specifications for various LED fixture types, lighting controls, electrical data, and the complete Statement of Work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| L7 ldn6.pdf | ||
| L1 blt-2x4.pdf | ||
| Footcandles.pdf | ||
| Typical Office-Classroom Fixture.pdf | ||
| L4 clx-strip-light-spec-sheet.pdf | ||
| SOW BooneAASF_ReLighting.docx | DOCX document | |
| 1370207-event.pdf | ||
| Boone_AASF_Lighing_Data.xlsx | XLSX spreadsheet | |
| R2-3_LED Linear Recessed.pdf | ||
| L5 - AVX_led.pdf | ||
| R1_LED Downlight.pdf | ||
| LB1 dl_pgn_spec_WallPack.pdf | ||
| F1-2_LED Flat Panel.pdf | ||
| 19A25-AASF1-001-11x17.pdf | ||
| L6 LED_V70269_CS51922.pdf | ||
| R4_LED Retrofit.pdf |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WWW.LEGRAND.US/WATTSTOPPER1
WATTSTOPPER®
LOW VOLTAGE DUAL TECHNOLOGY CEILING
SENSORS
DT-300 SERIES
DESCRIPTION
The DT-300 Series Dual Technology Ceiling Sensors combine the benefits of passive infrared (PIR) and ultrasonic technologies to detect occupancy. Sensors have a flat, unobtrusive appearance and provide 360 degrees of coverage.
OPERATION
Low voltage DT-300 Series sensors utilize a Wattstopper power pack to turn lights on when both PIR and ultrasonic technologies detect occupancy. They can also work with a low voltage switch for manual-on operation. PIR technology senses motion via a change in infrared energy within the controlled area, whereas ultrasonic uses 40KHz high frequency ultrasound. Once lights are on, detection by either technology holds them on. When no occupancy is detected for the length of the time delay, lights turns off. DT-300 Series Sensors can also be set to trigger lights on when either technology or both detect occupancy, or to require both technologies to hold lighting on.
• Advanced control logic based on RISC micro-controller provides:
– Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
– Walk-through mode turns lights off three minutes after the area is initially occupied – ideal for brief visits such as mail delivery
• Available with built-in light level sensor featuring simple, one-step setup
• Patented ultrasonic diffusion technology spreads coverage to a wider area
• LEDs indicate occupancy detection
• Sensors work with low-voltage momentary switches to provide manual control
• Uses plug terminal wiring system for quick and easy installation
• Eight occupancy logic options provide the ability to customize control to meet application needs
• Available with isolated relay for integration with BAS or
HVAC
• BAA/TAA-compliant models available
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
TIME DELAY OPTIONS
The DT-300 is factory set for a 20 minute time delay, ideal for both energy savings and user satisfaction in most applications.
Installers can quickly select other fixed time delays (5, 10, 15 or 30 minutes) via DIP switches. Fixed time delays eliminate the occupant dissatisfaction associated with an automatically adjusted time delay option, and reduce callbacks. Walk-through mode may be enabled for added energy savings in spaces with frequent transient traffic.
APPLICATIONS
DT-300 Series Dual Technology Sensors have the flexibility to work in a variety of applications, where one technology alone could cause false triggers. Ideal applications include classrooms, open office spaces, large offices and computer rooms. The DT-300 Series mounting system makes them easy to install in ceiling tiles or to junction boxes, providing the flexibility to be used in a wide range of spaces.
FEATURES
Architecturally appealing low-profile appearance
Plug terminal wiring for quick and easy installation
Supports automatic or manual-on operation
Walk-through mode increases savings potential
Accepts low-voltage switch input for manual-on operation
Ultrasonic diffusers give more comprehensive coverage
SENSORS | Occupancy and Vacancy
WWW.LEGRAND.US/WATTSTOPPER 2
| • | 18–28 VDC/VAC |
| • | Current Consumption @24VDC/VAC |
| – DT-300: 25mA (DC)/74mA (AC) |
| – DT-305: 16mA (DC)/69mA (AC) |
| • | Ultrasonic frequency: 40kHz |
| • | Time delays: 5, 10, 15, 20, or 30 minutes, Walk-through/Test Modes |
| • | Sensitivity adjustment: High/low (PIR); variable with trim pot |
(ultrasonic)
• Built-in light level sensor: 10 to 300 footcandles (107.6 to
3,229.2 lux)
• Multi-level Fresnel lens provides 360° coverage
• Low-voltage, momentary switch input for manual on or off operation
• DT-300 contains an isolated relay with N/O and N/C outputs; rated for 1 Amp @ 30 VDC/VAC
| • | Mounting options: ceiling tile; 4” octagonal J-box, 1.5” deep |
| • | Max DT-300s per BZ power pack: 6 |
Max DT-305s per BZ power pack: 7
• Dimensions: 4.50” diameter x 1.02” deep
(114.3mm x 25.9mm)
| • | UL and cUL listed |
| • | Five year warranty |
SPECIFICATIONS
Rear housing
Depluggable terminal
Front cover
Ceiling
Spring clips (2)
Low Voltage Wires
Control Output
Common
+24VDC
Neutral
Hot
White
Black
R ed
B la ck
Power Pack
B lu e
Red
Red
Fixture
BZ-200
**Ground
*To Additional Sensor(s)
** BZ-200 Power Pack must be grounded to ensure signal integrity, not for safety ground.
Optional Local Off Switch
Fixture
Optional Local Off Switch
DT-300/DT-305
Low Voltage Occupancy Sensor
Keyhole slots (for mounting to 4" octagonal box)
Double gang mudring mounting holes
Light level pushbutton
DIP switches
PIR lens
Ultrasonic sensitivity trimpot
ON
ECE
Ultrasonic transducer cones
Ultrasonic activity LED (Green)
PIR Activity LED (Red)
Standard
Option 2 Option 3
Option 1
Trigger
Option 4 Option 5
In iti al O cc up an cy
M ai nt ai n O cc up an cy
R e-tri gg er (s ec on ds du ra tio n)
O cc up an cy L og ic
Both
Both PIR Both(5)
Either(5)
Either EitherEither Either
Either(5) Either(5)
Either
PIR
PIR
PIR(5)
Either(30) Either(5)Either
= ON
= OFF
6 7 8
Switch#
O cc up an cy L og ic
= Factory Setting
5 minutes 10 minutes 15 minutes 20 minutes 25 minutes 30 minutes
30 seconds
1 2 3Time Delay
Test Mode/20 min
Minimum PIR Sensitivity
Walk-Through Enabled Disabled
Maximum
PIR
PIR
Settings
Man.
Man. PIR Both(30)
Feature
Option 6 Option 7
Standard
Option 2 Option 3
Option 1
Option 4 Option 5 Option 6 Option 7
Standard
Option 2 Option 3
Option 1
Trigger
Option 4 Option 5
In iti al O cc up an cy
M ai nt ai n O cc up an cy
R e-tri gg er (s ec on ds du ra tio n)
O cc up an cy L og ic
Both
Both PIR Both(5)
Either(5)
Either EitherEither Either
Either(5) Either(5)
Either
PIR
PIR
PIR(5)
Either(30) Either(5)Either
= ON
= OFF
6 7 8
Switch#
O cc up an cy L og ic
= Factory Setting
5 minutes 10 minutes 15 minutes 20 minutes 25 minutes 30 minutes
30 seconds
1 2 3Time Delay
Test Mode/20 min
Minimum PIR Sensitivity
Walk-Through Enabled Disabled
Maximum
PIR
PIR
Settings
Man.
Man. PIR Both(30)
Feature
Option 6 Option 7
Standard
Option 2 Option 3
Option 1
Option 4 Option 5 Option 6 Option 7
The control technology (occupancy logic) is selectable. The default setting requires both technologies to trigger on, either to hold on, and is recommended for most applications.
WIRING & MOUNTING
Wiring Diagram Ceiling Mounting
CONTROLS & SETTINGS
Product Controls DIP Switch Settings
WWW.LEGRAND.US/WATTSTOPPER3
WATTSTOPPER®
Catalog # Voltage Current Coverage Features
DT-300 24VDC/VAC 25mA (DC)/ 74mA (AC) up to 1000 ft2 (92.9 m2 Isolated relay, light level
DT-300-U
DT-305 24VDC/VAC 16mA (DC)/ 69mA (AC) up to 1000 ft2 (92.9 m2
DT-300-5-U
27333 Rev 07/2021
ORDERING INFORMATION
36 ft (10.97m)
36 ft x 36 ft (10.97m x 10.97m)
COVERAGE
Coverage shown is maximum and represents half-step walking motion. Under ideal conditions, coverage for half-step walking motion can reach up to 1000 ft2.
Sensors are white and use Wattstopper power packs. Current consumption can be slightly higher when only one sensor per power pack is used.
-U = BAA/TAA compliant; product is compliant with Buy American Act and Trade Agreement Act
| PROJECT: |
| LOCATION TYPE: |
| DT300: Off |
| DT300U: Off |
| DT305: Off |
| DT305U: Off |
File details come from the government source that posted it. Updated .