L4 clx-strip-light-spec-sheet.pdf

FEATURES & SPECIFICATIONS

INTENDED USE — The CLX is a linear lighting solution that is available in multiple lengths, lumen packages and distributions. Designed for versatility, the CLX can address virtually any indoor lighting need. The CLX is also offered in standard and high efficacy configurations and capable of being continuous row mounted or installed as a stand-alone fixture. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, and display applications. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.

CONSTRUCTION — Channel and cover are formed from code-gauge cold-rolled steel. Housing and lens endcaps are injection molded plastic to provide a more architectural look and feel. The endcaps come standard with a 7/8" knock out for continuous mounting but can be ordered without.

Finish: Paint options include high-gloss, baked white polyester (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance.

OPTICS — Offered with acrylic lens and less lens configurations. Provides a choice of optical distributions including, wide, narrow, and aisle.

Models with wide diffuse lens provide up to 12% uplight. Please check the IES file for specific uplight value.

ELECTRICAL — Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications. (See PLR_ ordering information on page 14.) Electronic LED driver is multi-volt input and 0-10V dimming standard (see Operational Data on page 6 for actual wattage consumption). This fixture is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided.

L70>100,000 hours at 25˚C.

LEDs provide nominal 80 CRI or 90 CRI at 3000 K, 3500 K,4000 K, or 5000 K.

Lumen output up to 2,500 lumens per foot.

INSTALLATION — Fixture may be ceiling or wall mounted (with or without THCLX hanger or angle mounted with CLXANGBRT), pendant or stem mounted with appropriate mounting options.

WARNING — Removing the lens and opening the fixture during installation exposes the LEDs, putting them at risk for damage.

If you plan to surface mount the fixture, we recommend using the THCLX. This eliminates the need to open the fixture.

If you plan to continuous row mount, we recommend using the PLR wiring harness option. This eliminates the need to open the fixture.

Damage to the LEDs caused during installation will not be covered under the warranty.

LISTINGS — CSA certified to US and Canadian safety standards. For use in damp locations between -4°F (-20°C) and 104°F (40°C). Optional High Ambient (HA) ranging to 122°F(50°C) available on certain lumen packages (See ambient temperature chart for additional information).

DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

BUY AMERICAN ACT— Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.

acuitybrands.com/buy-american for additional information.

WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed.

Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

LED Linear

CLX

24", 36", 48" and 96" Lengths

Catalog Number

Notes

Type

COMMERCIAL INDOOR CLX

Stock configurations are offered for shorter lead times:

Stock Part Number UPC

CLX L48 3000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525816

CLX L48 3000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525885

CLX L48 5000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525939

CLX L48 5000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525908

CLX L96 6000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525861

CLX L96 6000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525915

CLX L96 10000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525922

CLX L96 10000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525830

CLX L48 3000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525960

CLX L48 3000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525892

CLX L48 5000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525854

CLX L48 5000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525946

CLX L96 6000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525878

CLX L96 6000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525823

CLX L96 10000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525953

CLX L96 10000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525847

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® control networks marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details

Flat Diffuse Lens

Round Diffuse Lens

Wide Diffuse Lens

TM

CLX with Reflector http://www.acuitybrandslighting.com/library/ll/documents/specsheets/acrylic-polycarbonate-compatibility.pdf http://www.designlights.org/QPL https://www.acuitybrands.com/resources/buy-american https://www.acuitybrands.com/resources/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions http://www.acuitybrands.com/aplus https://www.acuitybrands.com/resources/buy-american

CLX LED Linear

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: CLX L48 5000LM SEF WDL MVOLT GZ10 40K 80CRI WH

Series Length Nominal lumens Performance package Louver Lens

CLX LED linear L24 24" ‡

L36 36" ‡

L48 48"

L96 96"

1500LM 1,500 lumens 2000LM 2,000 lumens 2500LM 2,500 lumens 3500LM 3,500 lumens 4500LM 4,500 lumens 5000LM 5,000 lumens ‡

2250LM 2,250 lumens 3000LM 3,000 lumens 3750LM 3,750 lumens 5250LM 5,250 lumens 6750LM 6,750 lumens 7500LM 7,500 lumens ‡

3000LM 3,000 lumens 4000LM 4,000 lumens 5000LM 5,000 lumens 7000LM 7,000 lumens ‡ 9000LM 9,000 lumens ‡ 10000LM 10,000 lumens ‡

6000LM 6,000 lumens 8000LM 8,000 lumens 10000LM 10,000 lumens 14000LM 14,000 lumens ‡ 18000LM 18,000 lumens ‡ 20000LM 20,000 lumens ‡

SEF Standard efficiency ‡ HEF Premium efficiency ‡

(Blank) Less louver SBLW Straight blade louver, white ‡ SBLMB Straight blade louver, matte black ‡ SBLGV Straight blade louver, galvanized ‡ SBLSKGY Straight blade louver, smoke gray ‡

L/Lens Less lens FDL Flat diffuse ‡ RDL Round diffuse ‡ WDL Wide diffuse ‡

Distribution Voltage Driver ‡ Glare Reflector Color temperature Coloring rendering index

(Blank) General ND Narrow ‡ WD Wide ‡ AD2 Aisle, 24° off center ‡

MVOLT 120-277V ‡

120 120V 208 208V ‡ 240 240V ‡

277 277V 347 347V ‡ 480 480V ‡

GZ1 Generic 0-10V, dims to 1% ‡ GZ10 Generic 0-10V, dims to 10% ‡ EZ1 eldoLED 0-10V, dims to 1% ‡

(blank) No reflectors LUGR Reflectors for additional glare reduction ‡

30K 3000 K 35K 3500 K 40K 4000 K 50K 5000 K

80CRI 80 CRI

90CRI 90 CRI

Options Finish

PS1050 Emergency battery pack, 10W, CA Title 20 Noncompliant ‡

E10WLCP Emergency battery pack, 10W Linear Constant Power, Certified in CA Title 20 MAEDBS ‡

BGTD Generator transfer device, not avaialble with

PS1050 ‡

OCS 5', 18/3 Reloc selectable One Pass cable (fixture will bear dry location label) ‡

HA High ambient, for use in ambient temperatures up to 50°C ‡

EPNKO Decorative endplate, no knock out ‡ OUTCTR Wiring leads pulled through back center of fixture ‡ OUTEND Wiring leads pulled through end of fixture ‡ Cord Sets:

CS1W 6' Staight blade plug, 120V ‡ CS3W NEMA twist-lock plug, 120V ‡ CS7W Staight blade plug, 277V ‡ CS11W NEMA twist-lock plug, 277V ‡ CS25W NEMA twist-lock plug, 347V ‡ CS97W NEMA twist-lock plug, 480V ‡ CS93W 600V SEOOW white cord, no plug (no voltage required) CS6WG16STOWD5D 6' white cord, 16/5, no plug, includes low voltage dimming wires (no voltage required) ‡

PLR__ Plug-in wiring, see page 14 for ordering information

PLR1LVG Plug-in wiring,low voltage dimming ‡

RRL__ RELOC®-ready luminaire. See page 14 for ordering information

SPD Surge protection device, provides up to 6kV protection ‡

BAA Buy America(n) Act Compliant nLight® Wireless: ‡ NLTAIR2 RES7 nLight® Generation 2 enabled PIR integral occupancy sensor with automatic dimming photocell

NLTAIR2 RES7PDT nLight AIR Generation 2 enabled dual technology integral occupancy sensor with automatic dimming photocell

NLTAIR2 RIO No sensor control nLight® Wired: ‡ N100 nLight® without lumen management N100EMG nLight® without lumen management For use with generator supply EM power ‡

NES7 nLight® nES 7 PIR integral occupancy sensor ‡

NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control ‡

NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell ‡

NESPDT7ADCX nLight® nES PDT 7 dual technology integral occupancy sensor with automatic dimming photocell ‡

Individual controls: ‡ MSD7 PIR integral occupancy sensor MSDPDT7 PDT 7 dual technology integral occupancy control MSD7ADC PIR integral occupancy sensor with automatic dimming control photocell MSDPDT7ADC PDT integral occupancy sensor with automatic dimming control photocell

WH White GALVW Galvanized with white lens end caps

GALVB Galvanized with black lens end caps

MB Matte black SKGYW Smoke gray with white lens end caps

SKGYB Smoke gray with black lens end caps

See Accessories and footnotes on next page mailto:techsupport-commercialindoor%40acuitybrands.com?subject= http://www.lithonia.com

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

Accessories: Order as separate catalog number.

Mounting:

ZACVH M100 Adjustable 10' aircraft cable with Y hanger (1 pair)

ZAC120 One adjustable aircraft cable with canopy 120" ‡

ZACFP120 One adjustable aircraft cable with feed (3 conductor) and canopy, 120" ‡

ZACFPD120 One adjustable aircraft cable with feed (5 conductor) and canopy 120" ‡

ZAC240 One adjustable aircraft cable with canopy 240" ‡

ZACFP240 One adjustable aircraft cable with feed (3 conductor) and canopy, 240" ‡

ZACFPD240 One adjustable aircraft cable with feed (5 conductor) and canopy 240" ‡

SQ_ Swivel stem hanger (specify length in 2" increments up to 48") ‡

THCLX __ Tong hanger (Must specify color) (one pair) ‡ CLXANGBKT ___ Angle bracket, (Must specify color) (one pair) ‡ HC36 M12 Hanger chain, 36" (1 pair)

Reflectors:

CLXRW24__ Wide decorative 24" reflector, (Must specify color) ‡ CLXRW36__ Wide decorative 36" reflector, (Must specify color) ‡ CLXRW48__ Wide decorative 48" reflector, (Must specify color) ‡ CLXRW96__ Two wide decorative 48" reflectors, (Must specify color) ‡ CLXRWU24__ Wide decorative 24" reflector with uplight, (Must specify color) ‡ CLXRWU36__ Wide decorative 36" reflector with uplight, (Must specify color) ‡ CLXRWU48__ Wide decorative 48" reflector with uplight, (Must specify color) ‡ CLXRWU96__ Two wide decorative 48" reflectors with uplight, (Must specify color) ‡

CLXRN24 Narrow 24" reflector, (Must specify color) ‡ CLXRN36 Narrow 36" reflector, (Must specify color) ‡ CLXRN48 Narrow 48" reflector, (Must specify color) ‡ CLXRN96__ Two narrow 48" reflectors, (Must specify color) ‡

Wireguards:

WGCLX24__ 24" wireguard, (Must specify color) ‡ WGCLX36__ 36" wireguard, (Must specify color) ‡ WGCLX48__ 48" wireguard, XX, (Must specify color) 96" fixture requires two ‡

‡ Option Value Ordering Restrictions

Option value Restriction 347V, 480V Voltage selected utilizes a step-down transformer. Not available with L24 when ordered with N100. Not available with PS1050, E10WLCP or BGTD option.

BGTD Not available with MVOLT, 208V or 240V. Not available with HA. Available with L48 or L96 only. 20 Not available with PS1050 or E10WLCP options. Not available with 208 or

240V. Not available Individual controls, NLight Wired, or NLight Wireless options.

CLXRN REFLECTORS For use with L/LENS fixtures only. L24 reflector is 22.75", L36 reflector is 34.20"", L48 reflector is 46.85", L96 comes with two L48 reflectors.

CLXRW REFELCTORS L24 reflector is 22.65", L36 reflector is 34.01", L48 reflector is 46.80", L96 comes with two L48 reflectors.

CS1W, CS3W, CS7W, CS11W, CS25W, CS97W Not available with BGTD option. Must specify voltage.

CS6WG16STOWD5D Not available with Individual controls, nLight wired networking, nLight wireless networking, nLight wireless zone control options.

DRIVER When continuous row mounting, fixtures must all have the same driver selection.

E10WLCP Not available with OUTCR, Not available with HA. Not available with MVOLT, Must specify voltage. Not available with BGTD option. Requires SPD option. Not available with L24 or L36. Not available with L48 in combination with N100.

EPNKO Not available OUTEND.

EZ1 Not available with HA option.

FDL, RDL, WDL Only available with general distribution. Not available with CLXRN accessories.

GZ1, GZ10 Not available with Individual controls, nLight wired networking, nLight wireless networking, nLight wireless zone control options.

HA Not available with L24, L26, Not available with BGTD option. Not available with EZ1. Only available with L48 3000/4000/5000LM and L96 6000/8000/10000LM.

HEF not available with L48 3000LM and L96 6000LM LUGR Not available with L36 length. Only available with WH finish. Not compatible with THCLX Hanger or wireguard accessories. LUGR option required for some DLC premium qualifications - Please check the DLC Qualified Products List to determine if LUGR option is necessary to meet requirement. If mounting in continuous rows, ensure all models ordered with LUGR option if required on any configuration to ensure rows match in form factor. LUGR reflectors ship in standard fixture carton and are not sold as separate accessory - this option MUST be specified as part of the CLX model number.

MSD7, MSDPDT7, MSD7ADC, MSDPDT7ADC Not available with any other control option. Requires EZ1. Sensor housing will be the same color as lens end caps.

N100, N100EMG nLight EMG option requires a connection to existing nLight network. Power is provided from separate N100 enabled fixture.

ND, WD, AD2 Not available with CLXRN accessories. Available L/LENS only.

NES7, NESPDT7, NES7ADCX, NESPDT7ADCX Not available with any other control option. Requires EZ1. Requires N100 or N100EMG option, N100EMG with NES7 requires RFA. Sensor housing will be the same color as lens end caps.

NLTAIR2 RES7, NLTAIR2 RES7PDT, NLTAIR2 RIO Not available with 5000LM, 7500LM, 10000LM, 14000LM, 18000LM, 20000LM. Sensor housing will be the same color as lens end caps.

OCS Must specify voltage.

OUTCR Not available with L24, Not available with PLR options.

OUTEND Not available with PLR options.

PLR1LVG Not available with Individual controls, NLight Wired, or NLight Wireless options. Refer to page 14 for more PLR details.

PS1050 Not available with MVOLT, Must specify voltage. Not available with BGTD option. Requires SPD option. Not available with L24 or L36. Not available with L48 in combination with N100. Not availablewith HA.

SBLW, SBLMB, SBLGV, SBLSKGY When ordered with L24 only available with 1500LM or 2000LM in combination with GZ10 driver. Not for use with THCLX, CLXANGBKT, CLX reflectors or WGCLX accessories. Not available with RDL lens options.

SEF Not available with EZ1 when ordered with L24 with 5000LM or L36 with 7500LM.

SPD Required with PS1050, E10WLCP, BGTD, XAD, or XAD924.

THCLX __, CLXANGBKT ___ Not available with louver, wireguards, wide reflectors. THCLX__ not available with LUGR.

WIREGUARDS Not for use with LUGR option or CLX wide reflector accessories.

ZAC120, ZACFP120, ZACFPD120, ZAC240, ZACFP240,

ZAPFPD240, SQ

Ships standard as white

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

Narrow reflector Ships separtely from fixture.

Order as:

CLXRN24__

CLXRN36__

CLXRN48__

CLXRN96__

Wide decorative reflector Ships separtely from fixture.

Order as:

CLXRW24__

CLXRW36__

CLXRW48__

CLXRW96__

Wireguard Ships separately from fixture:

96" fixture requires two WGCLX48.

Order as:

WGCLX24__

WGCLX36__

WGCLX48__

LUGR glare reflector NOT available as accessory - must be specified as part of the fixture nomenclature. See ordering notes on page 3.

Aircraft Cable with Canopy Available in 120" or 240"

Order as:

ZAC120

ZAC240

HANGER CHAIN

36" chain with Y hanger. ships as a pair

Order as:

HC36

ZACVH HANGER

10' Aircraft cable with Y hanger.

Order as:

ZACVH

Tong hanger Ships as a pair

Order As:

THCLX__

OPTIONS AND ACCESSORIES

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

DIMENSIONS

All dimensions are in inches (centimeters) unless otherwise indicated.

Dimensions may vary with options or accessories.

C

D

AABCCBA

INTEGRATED SENSOR ADDS 2.0 INCHES TO STANDALONE FIXTURE LENGTH

HOUSING END CAP ADDS 0.236 INCHES TO FIXTURE LENGTH PER SIDE. DIMENSIONS BELOW INCLUDE ENDCAPS.

A A - 7/8" KNOCK OUT

B - 0.5" by 0.16" SLOT

C - 0.3" DIA HOLE

THCLX - SHIPS TWO PER ORDER,

UTILIZES A #8 HEX HEAD SCREW AND NUT

FIXTURE SITS 1.3 INCHES FROM STRUCTURE WHEN MOUNTED

CLXANGBKT - SHIPS TWO PER ORDER

HOLES TO MOUNTING STRUCTURE ARE 0.175" DIA, 2.5" APART

FIXTURE SITS APPROXIMATELY 3.5" FROM STRUCTURE

WHEN MOUNTED HORIZONTAL TO STRUCTURE

8.24

L96

L48

L36

L24

A B C ABC

C C

C C

A

A

A

A

3.55 2.36

96.47

3.44

2.29

5.24 4.57

2.36 3.61

7.74 3.35

2.36

48.47 4.84

3.35 2.36

2.24 35.68

2.24

2.24 24.32

2.24 2.99

L24 WITH SENSOR

26.32

1.23

Length Approx Weight

Fixtures per pallet

Pallet Dims (L X W X H)

L24 4 lb 100 54x46x37

L36 5 lb 80 54x46x37

L48 7.5 lb 64 54x46x37

L96 14 lb 64 98x46x37

PALLET DIMENSIONS

A A

B B

C C

D D

3/4

9/19/2017

SAMPLE MUST BE APPROVED BY

LITHONIA LIGHTING ENGINEERING

PRIOR TO PRODUCTION RELEASE

INFORMATION HEREIN CONTAINED IS THE

PROPERTY OF LITHONIA LIGHTING AND IS

TO BE HELD IN COMPLETE CONFIDENCE.

REPRODUCE WITH WRITTEN CONSENT ONLY.

TITLE: DATE:

SCALE:

SHT.

OF

2 PLACE DECIMAL .030

3 PLACE DECIMAL .015

ANGLES ± 2

TOLERANCE UNLESS NOTEDMATERIAL:

ACUITY BRANDS LIGHTING, INC.

ONE LITHONIA WAY CONYERS, GEORGIA 30012 U.S.A.

www.acuitybrands.com www.lithonia.com

2.72

3.44

3.58

3.44

4.01

5.27

3.44

2.29

CLX OVERALL DIMENSIONS

C

D

AABCCBA

INTEGRATED SENSOR ADDS 2.0 INCHES TO STANDALONE FIXTURE LENGTH

HOUSING END CAP ADDS 0.236 INCHES TO FIXTURE LENGTH PER SIDE. DIMENSIONS BELOW INCLUDE ENDCAPS.

A A - 7/8" KNOCK OUT

B - 0.5" by 0.16" SLOT

C - 0.3" DIA HOLE

THCLX - SHIPS TWO PER ORDER,

UTILIZES A #8 HEX HEAD SCREW AND NUT

FIXTURE SITS 1.3 INCHES FROM STRUCTURE WHEN MOUNTED

CLXANGBKT - SHIPS TWO PER ORDER

HOLES TO MOUNTING STRUCTURE ARE 0.175" DIA, 2.5" APART

FIXTURE SITS APPROXIMATELY 3.5" FROM STRUCTURE

WHEN MOUNTED HORIZONTAL TO STRUCTURE

8.24

L96

L48

L36

L24

A B C ABC

C C

C C

A

A

A

A

3.55 2.36

96.47

3.44

2.29

5.24 4.57

2.36 3.61

7.74 3.35

2.36

48.47 4.84

3.35 2.36

2.24 35.68

2.24

2.24 24.32

2.24 2.99

A A

B B

1/1

10/4/2017

SAMPLE MUST BE APPROVED BY

LITHONIA LIGHTING ENGINEERING

PRIOR TO PRODUCTION RELEASE

INFORMATION HEREIN CONTAINED IS THE

PROPERTY OF LITHONIA LIGHTING AND IS

TO BE HELD IN COMPLETE CONFIDENCE.

REPRODUCE WITH WRITTEN CONSENT ONLY.

TITLE: DATE:

SCALE:

SHT.

OF

2 PLACE DECIMAL

3 PLACE DECIMAL

ANGLES ±

TOLERANCE UNLESS NOTEDMATERIAL:

ACUITY BRANDS LIGHTING, INC.

ONE LITHONIA WAY CONYERS, GEORGIA 30012 U.S.A.

www.acuitybrands.com www.lithonia.com

CLX MOUNTING BRACKET

1.50 3.10

3.63

2.00

.18

HOLES TO MOUNT

TO STRUCTURE

CLX ANGLE BRACKET

(SHOWN IN THE 0 DEG POSITION)

1.17

2.50

.40

USE TO MOUNT TO STRUCTURE

FEATURES FOR

T-GRID MOUNTING

CLX MOUNTING BRACKET ASSEMBLED

A A

B B

1/1

10/4/2017

SAMPLE MUST BE APPROVED BY

LITHONIA LIGHTING ENGINEERING

PRIOR TO PRODUCTION RELEASE

INFORMATION HEREIN CONTAINED IS THE

PROPERTY OF LITHONIA LIGHTING AND IS

TO BE HELD IN COMPLETE CONFIDENCE.

REPRODUCE WITH WRITTEN CONSENT ONLY.

TITLE: DATE:

SCALE:

SHT.

OF

2 PLACE DECIMAL

3 PLACE DECIMAL

ANGLES ±

TOLERANCE UNLESS NOTEDMATERIAL:

ACUITY BRANDS LIGHTING, INC.

ONE LITHONIA WAY CONYERS, GEORGIA 30012 U.S.A.

www.acuitybrands.com www.lithonia.com

CLX MOUNTING BRACKET

1.50 3.10

3.63

2.00

.18

HOLES TO MOUNT

TO STRUCTURE

CLX ANGLE BRACKET

(SHOWN IN THE 0 DEG POSITION)

1.17

2.50

.40

USE TO MOUNT TO STRUCTURE

FEATURES FOR

T-GRID MOUNTING

CLX MOUNTING BRACKET ASSEMBLED

A A A A

L/LENS

FDL

RDL

WDL

PHOTOMETRICS

See www.lithonia.com.

7.38

4.13

A

LUGR Reflector Option

- applies to all lens types mailto:techsupport-commercialindoor%40acuitybrands.com?subject=

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

Nominal Lumen

Package Length

Wattage Length Width Depth

Comparable Light SourceStandard Efficiency High Efficiency

120V 277V 347V 480V 120V 277V 347V 480V Dimensions are shown in inches

2500LM 24" 18.4 18.4 24.0 24.0 17.4 17.4 23.1 23.1 24 3.5 3.75 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID

5000LM 24" 41.5 41.5 47.4 47.4 38.1 38.1 44.1 44.1 24 3.5 3.75 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID

3750LM 36" 26.5 26.5 32.1 32.1 25.1 25.1 30.7 30.7 36 3.5 3.75 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID

7500LM 36" 62.6 62.6 68.6 68.6 54.0 54.0 59.7 59.7 36 3.5 3.75 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID

5000LM 48" 31.8 31.8 37.2 37.2 31.8 31.8 37.6 37.6 48 3.5 3.75 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID

10000LM 48" 70.7 70.7 76.2 76.2 65.3 65.3 70.8 70.8 48 3.5 3.75 3-lamp 32W T8, 2-lamp 54W T5HO, 100W HID

10000LM 96" 63.7 63.7 69.0 69.0 63.7 63.7 69.5 69.5 96 3.5 3.75 3-lamp 32W T8, 2-lamp 54W T5HO, 100W HID

20000LM 96" 141.3 141.3 146.8 146.8 130.5 130.5 136.1 136.1 96 3.5 3.75 6-lamp 32W T8, 4-lamp 54W T5HO, 200W HID

CLX CHARACTERISTICS

SEF Emergency Lumens HEF Emergency Lumens

PS1050 Factory installable 1400 1500

E10WLCP Factory installable 1400 1500

PS1555LCP Field installable, remote mount only 2000 2100

POWER SENTRY EMERGENCY BATTERY PACKS

Note: For emergency lumen output of specific model, please consult factory. One board will be illuminated during emergency operation.

mailto:techsupport-commercialindoor%40acuitybrands.com?subject= http://www.lithonia.com https://www.acuitybrands.com/products/detail/369448/Power-Sentry/PS1050/Reduced-Profile-LED-Emergency-Battery-Pack https://www.acuitybrands.com/products/detail/755258/Power-Sentry/PS1055LCP-Battery-Pack/Constant-Power-Field-Installable-LED-Emergency-Driver https://www.acuitybrands.com/products/detail/755258/Power-Sentry/PS1055LCP-Battery-Pack/Constant-Power-Field-Installable-LED-Emergency-Driver

CLX

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) techsupport-commercialindoor@acuitybrands.com www.lithonia.com © 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/17/22

Compatible RELOC® Cables for Industrial Luminaires (ordered and shipped separately)

OCS OCU DC PTOD

Series Wiring instructions

RRL RELOC®-ready luminaire A Hot conductor wired to position #1 (phase A) B Hot conductor wired to position #2 (phase B) C Hot conductor wired to position #3 (phase C) 1

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RRLA

Notes 1 C, ABE, and C12S options are not used with Quick-Flex QFC, QSFC, QPT, and QD.

RRL - RELOC®-Ready Luminaire

• RRL connectors can be used with Quick-Flex®, System 820 and OnePass® systems.

• Load side of connector factory installed to luminaire.

• 4-pole mating connector with push-in terminations allows for simple installation.

• Touch-safe design on both halves meets UL/CSA requirement.

• Wiping contact design allows safe disconnect under load.

PLUG-IN WIRING INFORMATION

Advanced plug-in system with two-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. PLR22 (2-circuit) and crossover harness switches hot circuit serving next fixture in row.

Reduces fixture types on job for alternating circuit applications (see example below.)

Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy.

Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90°C. White neutral wire included. Grounding accomplished by fixture in-row connectors.

CSA certified systems available with up to 2 circuits. G ground required.

Not for use with dedicated emergency circuits.

Note: Specifications subject to change without notice.

Wiring

PLR

Advanced 1 or 2-Circuit Plug-In

Typical Applications

• Multiple-circuit and single-circuit for longer continuous rows

• Multiple-circuit with alternating fixtures on separate circuits and 2-circuit PLR22

• Multiple circuit with night-lights located along row as desired

Series Number of hot wires Branch circuits Dimming Ground

PLR

PLR22

(blank) Not required for PLR22 1 Black 2 Black and red

Circuits to which driver is connected (blank) Not required for PLR22 A Black wire B Red wire

Battery charging circuit (must be unswitched) (blank) No battery charging circuit ELA Battery pack wired to black wire ELB Battery pack wired to red wire

LV Low-voltage dimming

G Ground (required)

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

mailto:techsupport-commercialindoor%40acuitybrands.com?subject= http://www.lithonia.com