L5 - AVX_led.pdf

ORDERING EXAMPLE: AVX - 4 - L100/835 - CPC - OPTIONS - DIM - UNV

ORDERING INFO

SERIES LENGTH LUMENS [ 1 ] CRI CCT SHIELDING

AVX 2 2′

2′

4′

8′

OPTIONS [4 ] DRIVER [ 5 ] VOLTAGE

EM/10WRM Remote mount 10-watt emergency battery [6 ]

EM/10WLP Low profile 10-watt emergency battery [ 7 ]

C2_ Two circuit quick-connect wiring harness [ 8 ]

(L__) Additional lower lumen packages available. [ 9 ] Example: 9,000 nominal lumens =

AVX-4-L100/835-(L90).

TPSN-8 #8, tamper-resistant (snake eyes) tool [ 1 0 ]

AVX-4 CMB 4′, vandal-resistant corner mount [ 1 1 ]

OCCUPANCY SENSORS [ 1 2 ]

MOUNTING (EXAMPLE: AC(Y12)/D48) [ 1 3 ]

ADJUSTABLE AIRCRAFT CABLE [ 1 4 ]

Prefix Type Length AC(Y12)/ D 1″ grid & hardpan

PENDANT MOUNT [ 1 5 ]

FEATURES

■ Ideal for schools, hallways, stairwells, dormitories, locker rooms, or vandal prone areas

■ Heavy-duty marine grade aluminum housing, die-cast end caps, and extremely durable impact-resistant polycarbonate lens add strength and durability

■ Tamper-resistant #8 snake eye screws provided to protect against vandals

■ Optional occupancy sensor available for use in stairwells and low traffic areas

■ Designed for surface, wall, pendant, or vandal-resistant corner mount

integral alignment pieces

SPECIFICATIONS

■ HOUSING – Marine grade aluminum.

Extruded housing with die-cast end caps.

■ SHIELDING – UV stabilized polycarbonate lens, .150″ thick with .040″matte white acrylic underlay to minimize pixelation.

■ REFLECTIVE SURFACES – 92% minimum average reflective white powder coat on interior components.

■ FINISH – Textured matte white polyester TGIC powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

■ ELECTRICAL – High quality mid-power LED board. Rated for 50,000 hours at 70% lumen maintenance (L70). Listed for 25ºC ambient operating temperature.

■ MOUNTING – Surface (ceiling or wall) or suspended (hanging hardware required).

■ LISTINGS – cETLus conforms to UL STD 1598. Certified to CAN/CSA STD C22.2 No.

250.0. Suitable for damp locations.

■ WARRANTY – 5-year limited warranty, see hew.com/warranty.

NOTES

1 Nominal lumen output based on 3500 CCT and CPC shielding.

Actual lumens may vary +/-5%. See page 2 for FIXTURE PERFORMANCE DATA. Additional lumen packages available, see options.

specified with next higher lumen package.

1 0 Tamper-resistant (TPSN-8) tool must be ordered separately.

Please specify quantity required per project.

EM battery in 2’ units. See page 2 for OCCUPANCY SENSOR

DETAILS.

for CORD FOR SUSPENDED PRODUCT.

1 5 Two stem sets required for 2′ and 4′ fixtures; three stem sets required for 8′. One additional stem set required for each 4′ length when row mounted.

1 6 Not available with EM drivers.

CATALOG #: � ����������������������������������������������

TYPE: �����������������������������������������������������

PROJECT:��������������������������������������������������

AVX LED

Architectural Vandal Wrap

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice.

Wraps � Page 1 of 3HEW.70460.LA REV.03/04/20

2-7/8″

11″ https://www.hew.com/resources/warranty-and-terms

FIXTURE PERFORMANCE DATA

LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (lm/W)

CLEAR (CPC) WHITE (WPC) CLEAR (CPC) WHITE (WPC)

2′ L25 2420 1670 21 113 78 L42 4279 2953 37 114 79

4′

L36 3677 2537 31 118 81 L62 6253 4315 57 109 75 L82 8302 5728 71 117 81 L100 9893 6750 88 112 77

8′

L72 7221 4982 61 119 82 L124 12507 8630 115 109 75 L164 16603 11456 141 117 81 L200 20153 13906 177 114 79

■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature.

MULTIPLIER TABLE

COLOR TEMPERATURE

CCT CONVERSION FACTOR

CR

I

2700K 0.97 3000K 0.99 3500K 1.00 4000K 1.03 5000K 1.06

CR

I

2700K 0.80 3000K 0.82 3500K 0.83 4000K 0.86 5000K 0.89

PHOTOMETRY

AVX-4-L62/835-CPC Total Luminaire Output: 6253 lumens; 110 Watts | Efficacy: 57 lm/W | 80 CRI; 3500K CCT

90°

0° 20°

40°

80°

0° 90°

60°

CA

ND

LE

PO

WE

R D

IST

RI

BU

TIO

N

VERTICAL

ANGLE

HORIZONTAL ANGLE ZONAL

LUMENS0º 45º 90º

0 2043 2043 2043 5 2055 2067 2083 196 15 1887 2003 2110 569 25 1616 1862 2105 861 35 1326 1721 2053 1048 45 985 1516 1882 1104 55 663 1185 1508 987 65 395 855 1110 765 75 149 480 662 464 85 24 199 337 205 90 6 94 189

LU

ME

N

SU

MM

AR

Y ZONE LUMENS % FIXTURE

0 - 30 1627 26 0 - 40 2676 43 0 - 60 4766 76 0 - 90 6201 99 0 - 180 6253 100

ADDITIONAL DRIVER OPTIONS

Note: Lumen restrictions apply, consult product builder at hew.com/product-builder.

CATALOG NUMBER DESCRIPTION

DRV Driver prewired for non-dimming applications DIM Dimming driver prewired for 0-10V low voltage applications DIM1 1% dimming driver prewired for 0-10V low voltage applications DIM LINE Line voltage dimming driver (Must specify 120V or 277V only) SD40 40% step-dimming driver SD50 50% step-dimming driver DALI DALI dimming driver LTE LINE Lutron Hi-lume 1% 2-wire dimming driver forward phase line voltage controls (120V only) LDE1 Lutron Hi-lume 1% EcoSystem dimming LED driver LDE5 Lutron 5-Series 5% EcoSystem dimming LED driver ELDO SOLOB EldoLED Solodrive, 0.1% dimming driver for 0-10V controls ELDO SOLOB DALI EldoLED Solodrive, 0.1% dimming driver for DALI controls ELDO ECO1 EldoLED Ecodrive, 1% dimming driver for 0-10V controls ELDO ECO1 DALI EldoLED Ecodrive, 1% dimming driver for DALI controls

OCCUPANCY SENSOR DETAILS

2′ AND 4′ UNIT 8′ UNIT

Occupancy Sensor

Occupancy Sensor

AVX LED

Architectural Vandal Wrap

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice.

Wraps � Page 2 of 3HEW.70460.LA REV.03/04/20

FIXTURE DETAILS

BACK VIEW – 2′ AND 4′ UNITS

B (Pendant)

D (Cable)

C (Surface)

(2) ø2″ KOs*

A (Overall)

(4) ø7/8″ KOs

ACTUAL LENGTHS

DIMENSION TYPES 2′ UNIT 4′ UNIT 8′ UNIT

A (Overall) 25-3/4″ 48-1/16″ 95-9/16″ B (Pendant) 23-1/4″ 45-7/16″ 92-5/16″ C (Surface) 21-1/2″ 44″ 91-1/2″ D (Cable) 23″ 46″ 93-1/2″

* �2″ KOs not available in 2′ fixture length with EM option.

BACK VIEW – 8′ UNITS

B (Pendant)

D (Cable)

C (Surface)

A (Overall)

(8) ø7/8″ KOs(4) ø2″ KOs

45-7/16″ (Pendant)46-7/8″ (Pendant)

CORNER MOUNT DETAILS

7-5/8″

7-5/8″

CORD FOR SUSPENDED PRODUCT

Units specified with ACF(Y12)__ require cord. Please specify cord type using ordering information below.

EXAMPLE: S 24 3 8 / W

CORD TYPE LENGTH # OF COND. WIRE SIZE COLOR

S

FINISH OPTIONS

WHITE BLACK BRONZE NICKEL SILVER ALUMINUM

For custom color, please specify RAL code or a manufacturer code with description. All custom colors other than RAL require two sample swatches, minimum 1″ square.

QUICK-CONNECT OPTIONS

Note: Quick connect wiring required for row mounting. Length restrictions may apply, consult product builder at hew.com/product-builder.

DESIGNATION NUMBER OF WIRES

(EXCLUDING GROUND) WIRE COLORS WIRE COLOR/POWER SUPPLY

FACTORY CONNECTIONS TYPICAL USE

C2B 3 White, Black, Red White, Black Alternating Circuits

C2BR 3 White, Black, Red White, Black, Red ON/OFF Switching (DRV) or Line Voltage dimming (DIM LINE) when equipped w/EM Power Supply (EM/10W)

C2R 3 White, Black, Red White, Red Alternating Circuits C2BW/RY 5 White, Black, Red, Gray, Green White, Black/Red, Gray 0-10V 4-wire Low Voltage Dimming (DIM)

AVX LED

Architectural Vandal Wrap

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice.

Wraps � Page 3 of 3HEW.70460.LA REV.03/04/20