LB1 dl_pgn_spec_WallPack.pdf

PGN Series

HIGH PERFORMANCE LED SCONCE

currentlighting.com/dual-lite © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.

Rev 05/16/22 dl_pgn_spec_R01

FEATURES

DATE: LOCATION:

TYPE: PROJECT:

APPLICATION

• The PGN is an indoor or outdoor architectural high performance LED sconce which offers "Normally On" and emergency operation in one fixture

• "Normally On" operation is powered by line voltage (120 or 277) that can be switched on/off and used for accent lighting, entrance/ exit illumination

• Failure of line voltage will result in automatic operation from secondary DC voltage which must be supplied from an external 6-12V DC emergency lighting unit

• The PGN includes a field installable full cut-off shield to address "dark sky" compliant requirements

CONSTRUCTION

• Housing and mounting plate are constructed of 1/8" die-cast aluminum and sealed with a 1/8" closed-cell silicone gasket

• The acrylic lens allows 92% light transmission

• The reflector is electro-polished aluminum with 95% reflectance

• Housing finish is powder coated electro-deposition paint available in four colors:

dark bronze, white, platinum silver and black

• Full cut-off shield constructed of cold-rolled steel, painted to match color as ordered

SPECIFICATIONS

INSTALLATION

• Universal backplate knockouts for mounting to standard 31/2", 4" octagonal and 4" square electrical boxes

• Backplate mounting is performed using installer supplied hardware

• An adhesive-backed neoprene gasket is provided to ensure a waterproof seal.

• A 1/2" – 1/4 NPT threaded conduit opening is provided at the top of the enclosure and sealed with a closure plug

• The housing “snaps” to the back plate by a “pin and socket” arrangement, and is secured with two Phillips head screws

ILLUMINATION

• The unit is illuminated by 4 high power

LED's arranged so that in the event of 1 or 2 LED failures the unit will continue to operate.

CATALOG #:

• Neutral white, 4000K LEDs

• Design optimized wide area illumination patterns

• No heads to aim, no adjustments to make

• Standard electrical box and conduit entry provisions

• 90-minute emergency operation from external 6 through 12V DC source

• Fast, easy installation

• Field installable full cut-off shield

• StarView™ Compliant

ORDERING GUIDE

CATALOG #

Example: PGNW

PGN

Model Finish

PGN High Performance LED Sconce

W White Z Dark Bronze P Platinum Silver B Black

NFPA

COMPLIANCES

• UL 924 Listed

• UL Wet Location Listed

• NFPA 101 Life Safety Code

• NFPA 70 National Electrical Code

• OSHA

• IES full cut-off compliant with application of field installed shield

• U.S. Patent No. D627,916

WARRANTY

• 3 Years Full

PGN Series

HIGH PERFORMANCE LED SCONCE

currentlighting.com/dual-lite © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.

Rev 05/16/22 dl_pgn_spec_R01

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

ELECTRONICS

The PGN has two modes of operation:

Normal mode: In normal mode, power is suppled from 120V or 277V AC source and may be switched on/off allowing the unit to behave like a typical luminaire.

Emergency mode: Upon failure of normal utility power, an external (6-12VDC) emergency power source (supplied separately) having transfer logic will operate the PGN as an emergency unit. In order for the unit to function properly as emergency lighting (NEC 700.12), the DC emergency source must be powered (under normal conditions) from the same AC circuit as that to the unit.

Number of Lamps: Four high output LEDs

Lamp Configuration: 4 individually driven LEDs provide illumination.

In the event of 1 or 2 LED failures, the remaining LED's will continue to function

Lamp Type: Solid state high output LEDs

Lamp Color: Neutral White, 4000K

Color Rendering Index (CRI): 75

Total Lamp Output: 445 Lumens min. initial

Battery Charger: Temperature compensating, constant current

Transfer: Solid state

Functional Circuitry: Transient surge protection

Operating Temperature Range: -30°C to 50°C (-22°F to 122°F)

Normal Emergency

PGN

120VAC 17Watts 6VDC 12watts

277VAC 17Watts 12VDC 13 watts Power factor, average: 0.8 (lagging)

POWER CONSUMPTION

DIMENSIONS

ILLUMINATION PATTERN

SINGLE UNIT COVERAGE

MULTIPLE UNIT SPACING

Mounting Height: 9' Outdoor Reflectance: 0/30/10 Indoor Reflectance: 80/50/20

Mounting Height: 9' Illuminated Path Depth: 6' Outdoor Reflectance: 30/10 Indoor Reflectance: 80/50/20

Indoor Outdoor

1 FC Average (W x D) 35' X 10' 29' X 10'

1 FC Minimum (W x D) 11' X 10' 10' X 10'

Indoor Outdoor

1 FC Average 49' 37'

1 FC Minimum 19' 16'

W

D

Path of Egress 1 FC Average

7"

11"

3.1875"

7"

11"

3.1875"

ORDERING GUIDE

CATALOG #

Example: PGNW

PG

Model Finish

PGN High Performance LED Sconce

W White Z Dark Bronze P Platinum Silver B Black