Building298_Part3_Ch6_G20-Revised.pdf

Repair Building Envelope and Interior Finishes, Building 298 WO # N40085-19-F-6882 Building 298, Cherry Point, North Carolina

PART 3 - CHAPTER 6 - Page 695 06/17/2020

G20 SITE IMPROVEMENTS

SYSTEM DESCRIPTION

Provide site improvements that support project sustainability goals of Part 2 Section 01 33 29.05 20, Sustainability Reporting for Design Build.

The site improvements consist of pavements and pavement related features, landscaping and other exterior site development work related to this project. Provide a pavement design by a licensed Professional Engineer familiar with conditions local to the project site. Site design, including but not limited to design of parking and pedestrian circulation, will include coordination with the Civil Engineer and the Landscape Architect.

GENERAL SYSTEMS REQUIREMENTS

Provide site improvements as required to make a useable facility that meets functional and operational requirements, incorporates all applicable anti-terrorism, force protection and physical security requirements and blends into the existing environment.

Provide accessibility in conformance with requirements of UFC 1-200-01 , DoD Building Code (General Building Requirements).

Identify and obtain permits to comply with federal, state, and local regulatory requirements associated with this work. Complete the Permits Record of Decision (PROD) form with the first design submittal package. Determine correct permit fees and pay said fees. Forward copies of permits, permit applications, and the completed PROD form to the Government's Civil Reviewer. Perform work in accordance with the obtained permits.

Minimize the impact of construction activity on operations and neighboring facilities.

Locate new site improvements at locations indicated on the drawings in another part of this RFP. If specific locations are not provided, site the improvements to develop appropriate and positive relationships with other facilities and to conform to existing development patterns.

Refer to Site Analysis and Building Requirements Sections for additional site improvement functional program information.

G2010 ROADWAYS

Provide roadways, as required, to allow for safe, convenient and logical circulation, while discouraging through traffic.

Provide roadways of bituminous pavement and Portland cement concrete (PCC) pavement where indicated on the drawings in Part 6. Aggregate pavement may not be used.

Provide new roadway and other pavement sections as required by soil conditions and determined by the Designer of Record. Design pavement sections in accordance with UFC 3-201-01 Civil Engineering.

Provide other roadway improvements including markings and signage.

PART 3 - CHAPTER 6 - Page 696 06/17/2020

Include adequate space for trees and other landscape material in the design for streets, roads, and parking lots in accordance with PTS G2050.

G201001 BASES & SUBBASES

The following materials will not be allowed for base or subbase courses: bituminous concrete, lean concrete, cement stabilized, sand-clay, lime rock, shell, crushed concrete, or reclaimed asphalt.

G201002 CURBS & GUTTERS

Provide curb and gutter to tie into adjacent facilities. Use of curb and gutter as needed to tie into existing curb and gutter or per design by the project design Engineer. There is no requirement to use curb and gutter.

G201003 PAVED SURFACES

Provide Portland cement concrete with a minimum design flexural strength of 650 psi (4.48 MPa) in not more than 28 days.

Recycled asphalt pavement material may be used for bituminous pavement as permitted by the SHS.

G201004 MARKING & SIGNAGE

Provide pavement markings including crosswalks to match existing on the installation.

Provide signage to match existing on the installation.

Provide temporary pavement markings and signage throughout construction to meet phasing requirements indicated in the project program. Provide temporary signage in accordance with the Manual on Uniform Traffic Control Devices (MUTCD).

G201005 GUARDRAILS & BARRIERS

Provide wheelstops, and bollards in accordance with UFC 3-201-01, Civil Engineering.

G201006 RESURFACING

Provide resurfacing of existing pavement by bituminous overlay.

G201090 OTHER ROADWAYS

G2020 PARKING LOTS

Provide parking lots of bituminous pavement where indicated on the drawings in Part 6. Aggregate pavement may not be used.

Provide new parking and other pavement sections as required by soil conditions and determined by Designer of Record. Design pavement sections in accordance with UFC 3-201-01 Civil Engineering.

Provide other parking improvements including parking entrances for

PART 3 - CHAPTER 6 - Page 697 06/17/2020 two-way traffic. See ESR G2050 for parking lot landscape requirements.

Provide handicapped parking in accordance with UFC 1-200-01 , DoD Building Code (General Building Requirements).

G202001 BASES & SUBBASES

Crushed concrete meeting specified gradation for aggregate base or subbase courses may be used.

G202002 CURBS & GUTTERS

Provide curb and gutter to tie into adjacent facilities. Use of curb and gutter as needed to tie into existing curb and gutter or per design by the project design Engineer. There is no requirement to use curb and gutter.

G202003 PAVED SURFACES

Provide Portland cement concrete with a minimum design flexural strength of 650 psi (4.48 MPa) in not more than 28 days.

Recycled asphalt pavement material may be used for bituminous pavement as permitted by the SHS.

G202004 MARKING & SIGNAGE

Provide permanent and temporary markings (pavement, curb and object), signage (regulatory, warning and guidance) and other traffic control devices as required to facilitate proper utilization of the parking areas.

Provide pavement markings including crosswalks to match existing on the installation.

Provide signage to match existing on the installation.

Provide temporary pavement markings and signage to meet phasing requirements indicated in the Project Program. Provide temporary signage in accordance with the MUTCD.

G202005 GUARDRAILS & BARRIERS

Provide wheel stops and bollards in accordance with UFC 3-201-01, Civil Engineering.

G202006 RESURFACING

Provide resurfacing of existing pavement by bituminous overlay.

G202007 MISCELLANEOUS STRUCTURES AND EQUIPMENT

G202090 OTHER PARKING LOTS

G2030 PEDESTRIAN PAVING

Provide a network of Portland cement concrete (PCC) sidewalks, separated from, but connected to vehicular circulation systems, to

PART 3 - CHAPTER 6 - Page 698 06/17/2020 allow for pedestrian circulation between various new and existing elements of the project. Interface new pedestrian circulation systems with existing pedestrian circulation systems and include input from the Civil Engineer, Architect, and Landscape Architect.

G203001 BASES & SUBBASES

G203002 CURBS & GUTTERS

G203003 PAVED SURFACES

G203004 GUARDRAILS & BARRIERS

G203005 RESURFACING

G203006 OTHER WALKS, STEPS & TERRACES

G2040 SITE DEVELOPMENT

G204001 FENCING & GATES

G204002 RETAINING AND FREESTANDING WALLS

G204003 EXTERIOR FURNISHINGS

Site furnishings are required to conform to the Base Exterior Architectural Plan (BEAP) and the Installation Appearance Plan (IAP).

Provide picnic tables, trash receptacles, benches, recycling receptacles and hot ash receptacles. At a minimum, provide a trash and ash receptacle at the designated smoking areas.

G204004 SECURITY STRUCTURES

G204005 SIGNAGE

Provide signage in accordance with the Activity's BEAP and the Installation Appearance Plan.

G204006 FOUNTAINS & POOLS

G204007 PLAYING FIELDS

G204008 TERRACE AND PERIMETER WALLS

G204009 FLAGPOLES

G204090 OTHER SITE IMPROVEMENTS

Provide dumpster pad. Provide enclosure conforming to the Activity's BEAP and Installation Appearance Plan. Provide double metal gate with self-closing mechanism.

G2050 LANDSCAPING

G205001 FINE GRADING AND SOIL PREPARATION

G205002 EROSION CONTROL MEASURES

PART 3 - CHAPTER 6 - Page 699 06/17/2020

Prevent erosion from occurring by providing erosion control measures as required by city, state and federal requirements.

G205003 TOPSOIL AND PLANTING BEDS

G205004 SEEDING SPRIGGING AND SODDING

Restore existing turf areas disturbed by Contractor operations that are to remain as turf areas. Restore by means of sodding and provide same guarantee and maintenance as for new landscape areas. Turfgrass species must match existing.

G205005 PLANTINGS

Preserve existing trees to the greatest extent possible. Select plant material from Master Plant Lists found within the Installation Appearance Plan (IAP). Other plants not found on these lists may be used if approved by the reviewing Government Landscape Architect.

Final approval of new plant materials rests with the reviewing Government Landscape Architect.

If used for stormwater management, provide bioretention filters, plants, plant quantities, and soil mix in accordance with the State's Best Management Practices (BMP) Design Manual.

G205006 PLANTERS

G205007 IRRIGATION SYSTEMS

G205090 OTHER LANDSCAPING

--End of Section--