Building 11 Asbestos and LBP Assessment.pdf

FI

G

U R

E

AS

B

ES

TO

S

SA

M

PL

E

LO

C

AT

IO

N

M

AP

U R

E

AS

B

ES

TO

S

LO

C

AT

IO

N

M

AP

AC

M

L

EG

EN

D

U R

E

PA

IN

T C

H

IP

S

AM

PL

E

LO

C

AT

IO

N M

AP

OrderID: 412003727

Client Sample Description ConcentrationLab ID Analyzed Weight Lead

Collected

EMSL Analytical, Inc.

10801 Southern Loop Blvd, Pineville, NC 28134 Phone/Fax: (704) 525-2205 / (704) 525-2382 http://www.EMSL.com charlottelab@emsl.com

Attn: ECS Southeast, LLP - Wilmington ECS Southeast, LLP 6714 Netherlands Drive Wilmington, NC 28405

Received: 04/24/20 8:40 AM

Bld 11/ 49-9247 Dept. 8.4

Fax: (864) 987-1615 Phone: (910) 686-9114

Project:

4/23/2020Collected:

Test Report: Lead in Paint Chips by Flame AAS (SW 846 3050B/7000B)*

412003735 CustomerID: ENCS55 CustomerPO:

ProjectID:

EMSL Order:

.2339 Site: Cream on Brick 412003735-0001LBP1 0.15 % wt4/25/2020 g4/23/2020

.2649 Site: Black on Brick 412003735-0002LBP2 3.8 % wt4/25/2020 g4/23/2020

.2455 Site: White on Brick 412003735-0003LBP3 1.0 % wt4/25/2020 g4/23/2020

Kyle Collins, Technical Manager or other approved signatory

Test Report ChmSnglePrm/nQC-7.32.3 Printed: 4/27/2020 8:57:03 AM

*Analysis following Lead in Paint by EMSL SOP/Determination of Environmental Lead by FLAA. Reporting limit is 0.008 % wt based on the minimum sample weight per our SOP. Unless noted, results in this report are not blank corrected. EMSL maintains liability limited to cost of analysis. Interpretation and use of test results are the responsibility of the client. This report relates only to the samples reported above, and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. The report reflects the samples as received. When the information supplied by the customer can affect the validity of the results, it will be noted on the reoprt. "<" (less than) result signifies the analyte was not detected at or above the reporting limit. Measurement of uncertainty is available upon request. The QC data associated with the sample results included in this report meet the recovery and precision requirements unless specifically indicated otherwise. Definitions of modifications are available upon request.

Samples analyzed by EMSL Analytical, Inc. Pineville, NC AIHA-LAP, LLC - ELLAP 192283

Initial report from 04/27/2020 08:57:03

OrderID: 412003735 Page 1 Of

OrderID: 412003735 Page 2 Of