CB-OTH-IV_G51012.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CB-OTH-IV

G51012.0

REV’D: 03/06/15

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

SERIAL NUMBER TRACKED ITEM – ALL INFORMATION REQUIRED

ITEM NO.

[ ] DUE

CMS CODE ACTION DESCRIPTION CEINUM

G51012 REM/INST 500-0395-00(3UVR3), JOYSTICK AV-G510-012

SCHEDULED UNSCHEDULED

P A R T

O F F

BARCODE: SERIAL NUMBER:

PART POSITION:

REASON REMOVED: TIME___ TROUBLE___ CANNIBALIZATION___ OTHER___ COMPONENT STATUS: RFI___ NON RFI___

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

P A R T

O N

BARCODE: SERIAL NUMBER:

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

*ASTERISK INDICATES QA REQUIRED

QA

REMARKS INDICATING THE REASON FOR REMOVAL ARE REQUIRED

REFERENCES:

REVIEWED

BY LOG YN DATA ENTRY

COMPLETED

MK FN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

DC SN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

EM OTHER

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

ET

NAME: TECH ID/TH: _______/_____

GM

BM

IT

NAME: TECH ID/TH: _______/_____

1 500-0395-00(3UVR3) JOYSTICK CONTROL REMOVE/INSTALL

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

TOOLS/TEST EQUIPMENT:

NONE

EXPENDABLES:

Joystick, Data Entry (Control), P/N: 500-0385-00, CAGE: Z0PC2, NIIN: 016328596

CONSUMABLES:

NONE

A PRELIMINARY STEPS

1. Ensure that the area is safe for maintenance.

WARNING (3002)

OBSERVE SAFETY PRECAUTIONS WHEN WORKING WITH

ELECTRICAL AND ELECTRONIC EQUIPMENT. FAILURE TO

COMPLY EXPOSES PERSONNEL TO THE DANGER OF

ELECTRICAL SHOCK AND PERSONAL INJURY.

2. Identify breakers and/or switches to be tagged out for the following system:

a. SEAFLIR M Series Camera.

WARNING (3012)

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE TO

COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY OR

DEATH.

3. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B REMOVE

1. Remove joystick control (JCU).

a. Disconnect Ethernet cable from the joystick control.

b. Remove trim bezel from front of JCU to access the mounting screws, (Refer to Figure 1).

NOTE: The JCU has four captive mounting screws that hold four panel mounting clamps.

c. Rotate mounting screws counter clockwise one full turn.

d. Remove JCU from console.

C INSTALL

1. Install joystick control, P/N: 500-0385-00, (JCU).

a. Position JCU in the console opening.

b. Rotate mounting screws clockwise one full turn.

c. Ensure the panel mounting clamps are rotated outward from the JCU housing, (Refer to Figure 2).

NOTE: There is no torque value required, do not over tighten.

d. Tighten the mounting screws to draw the mounting clamps up against the mounting surface.

NOTE: There is no torque value required, do not over tighten.

e. Tighten the mounting screws clockwise a half turn.

f. Connect Ethernet cable to JCU.

D FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

2. Restore equipment to the normal status.

3. Record maintenance action by completing sign-off, adding pertinent remarks.

JCU

Figure 1

Trim

Bezel

JCU (REAR)

Figure 2

Panel Mounting Clamps