CB-OTH-IV_F23038.0(ESD).pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CB-OTH-IV

F23038.0

REV’D: 02/19/15

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

SERIAL NUMBER TRACKED ITEM – ALL INFORMATION REQUIRED

ITEM NO.

[ ] DUE

CMS CODE ACTION DESCRIPTION CEINUM

F23038 REM/INST RD33(1EE70), MULTI DISPLAY AV-F230-038

SCHEDULED UNSCHEDULED

P A R T

O F F

BARCODE: SERIAL NUMBER:

PART POSITION:

REASON REMOVED: TIME___ TROUBLE___ CANNIBALIZATION___ OTHER___ COMPONENT STATUS: RFI___ NON RFI___

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

P A R T

O N

BARCODE: SERIAL NUMBER:

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

*ASTERISK INDICATES QA REQUIRED

QA

REMARKS INDICATING THE REASON FOR REMOVAL ARE REQUIRED

REFERENCES:

IF THE COMPONENT BEING REMOVED IS PART OF A MISHAP THEN THE FOLLOWING IS REQUIRED: (1) PART WILL BE REMOVED “NRFI”. (2) THE REASON REMOVED WILL BE MARKED ”OTHER”. (3) THE FIRST WORD IN THE REMARKS WILL BE “MISHAP” FOLLOWED BY THE “MISHAP NUMBER”. (4) WRITE A BRIEF DESCRIPTION DESCRIBING WHAT OCCURRED. (5) ATTACH A COMPLETED COPY OF THIS MPC SIGN-OF SHEET TO THE “NRFI” COMPONENT PRIOR TO BEING SENT TO THE VENDOR.

REVIEWED

BY LOG YN DATA ENTRY

COMPLETED

MK FN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

DC SN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

EM OTHER

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

ET

NAME: TECH ID/TH: _______/_____

GM

BM

1 RD33(1EE70), MULTI DISPLAY REMOVE AND INSTALL

REFERENCES:

COMDTINST 9077.1 (series), Equipment Tag-Out Procedure

TOOLS/TEST EQUIPMENT:

NONE

EXPENDABLES:

Display Unit (RD33), P/N: RD33, CAGE: 1EE70, NIIN: 016161486

CONSUMABLES:

Marker, Identification, P/N: PCMB-3, CAGE: 06383, NIIN: 004229673 (If required)

A PRELIMINARY STEPS

1. Ensure that the area is safe for maintenance.

WARNING

OBSERVE SAFETY PRECAUTIONS WHEN WORKING WITH

ELECTRICAL AND ELECTRONIC EQUIPMENT. FAILURE TO

COMPLY EXPOSES PERSONNEL TO THE DANGER OF

ELECTRICAL SHOCK AND PERSONAL INJURY.

2. Identify breakers and/or switches to be tagged out for the following systems:

a. Display unit (RD33), P/N: RD33.

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE TO

COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY OR

DEATH.

3. Complete Red Danger Tag(s) IAW COMDTINST 9077.1 (series).

B REMOVE

1. Locate the rear of the display unit (RD33), (Refer to Figure 1).

2. Ensure all cables have been properly labeled using indentification wire, P/N: PCMB-3, before disconnecting, if required.

3. Disconnect from the back of the display unit (RD33):

a. Ground wire.

b. Power cable.

c. NMEA cable, if required.

4. Remove the four self-tapping screws securing the mounting bracket to the console.

5. Slide the display unit (RD33) out of its mounting position.

6. Place the display unit (RD33) away from the working area.

C INSTALL

1. Install the display unit (RD33), P/N: RD33 into the mounting position.

2. Slide the display unit (RD33) into its mounting position.

NOTE: There is no torque value required, do not over tighten.

3. Tighten the mounting bracket into the console using the four self-tapping screws.

4. Connect the following to the back of display unit (RD33):

a. Ground wire.

b. Power cable.

c. NMEA cable, if required.

D FINAL STEPS

1. Remove Red Danger Tag(s) IAW COMDTINST 9077.1 (series).

2. Restore equipment to the normal status.

3. Record maintenance action by completing appropriate sign-off, adding pertinent remarks.

RD33 MULTI DISPLAY REAR VIEW

Figure 1

POWER

CABLE

GROUND

WIRE

NMEA

CONNECTION SELF-

TAPPING

SCREWS

Ground Wire

Self-tapping Screws

NMEA

Connection

Power Cable