CB-OTH-IV_E32021.0(ESD).pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CB-OTH-IV

E32021.0

REV’D: 02/19/15

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

SERIAL NUMBER TRACKED ITEM – ALL INFORMATION REQUIRED

ITEM NO.

[ ] DUE

CMS CODE ACTION DESCRIPTION CEINUM

E32021 REM/INST F2265(V) (3X7B4), COUPLER, ANT AV-E350-004

SCHEDULED UNSCHEDULED

P A R T

O F F

BARCODE: SERIAL NUMBER:

PART POSITION:

REASON REMOVED: TIME___ TROUBLE___ CANNIBALIZATION___ OTHER___ COMPONENT STATUS: RFI___ NON RFI___

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

P A R T

O N

BARCODE: SERIAL NUMBER:

MAN HOURS: MK___.___ DC___.___ EM___.___ ET___.___ GM___.___ BM___.___ FN___.___ SN___.___ OTHER___.___

TECHNICIAN’S

SIGNATURE

TECHNICIAN’S

ID

QUALITY ASSURANCE

SIGNATURE

*ASTERISK INDICATES QA REQUIRED

QA

REMARKS INDICATING THE REASON FOR REMOVAL ARE REQUIRED

REFERENCES:

IF THE COMPONENT BEING REMOVED IS PART OF A MISHAP THEN THE FOLLOWING IS REQUIRED: (1) PART WILL BE REMOVED “NRFI”. (2) THE REASON REMOVED WILL BE MARKED ”OTHER”. (3) THE FIRST WORD IN THE REMARKS WILL BE “MISHAP” FOLLOWED BY THE “MISHAP NUMBER”. (4) WRITE A BRIEF DESCRIPTION DESCRIBING WHAT OCCURRED. (5) ATTACH A COMPLETED COPY OF THIS MPC SIGN-OF SHEET TO THE “NRFI” COMPONENT PRIOR TO BEING SENT TO THE VENDOR.

REVIEWED

BY LOG YN DATA ENTRY

COMPLETED

MK FN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

DC SN

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

EM OTHER

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

NAME: TECH ID/TH: _______/_____ NAME: TECH ID/TH: _______/_____

ET

NAME: TECH ID/TH: _______/_____

GM

BM

1 F2265(V) (3X7B4), ANTENNA COUPLER REMOVE AND INSTALL

REFERENCES:

COMDTINST 9077.1 (series), Equipment Tag-Out Procedure

TOOLS/TEST EQUIPMENT:

NONE

EXPENDABLES:

Coupler, Antenna, P/N: F2265C, CAGE: 1W4A4, NIIN: 016200759 (Repair Part/ Mandatory Turn-in Item)

CONSUMABLES:

Marker, Identification, P/N: PCMB-3, CAGE: 06383, NIIN: 004229673

A PRELIMINARY STEPS

1. Ensure area is safe for maintenance.

WARNING (3002)

OBSERVE SAFETY PRECAUTIONS WHEN WORKING WITH

ELECTRICAL AND ELECTRONIC EQUIPMENT. FAILURE TO

COMPLY EXPOSES PERSONNEL TO THE DANGER OF

ELECTRICAL SHOCK AND PERSONAL INJURY.

2. Identify breakers and/or switches to be tagged out for the following systems:

a. MICOM3T(3X7B4), HF transceiver.

WARNING (3012)

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE TO

COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY OR

DEATH.

3. Complete Red Danger Tag(s) IAW COMDTINST 9077.1 (series).

B REMOVE

1. Locate the antenna coupler, P/N: F2265C.

2. Ensure all wires have been properly labeled before disconnecting, using identification marker, P/N: PCMB-3.

3. Disconnect the following from the antenna coupler:

a. Control/power cable connector.

b. Antenna connector.

c. Grounding strap.

4. Remove four mounting bolts from the antenna coupler mounting plates, (Refer to Figure 1).

a. Remove antenna coupler from base plate.

5. Remove mounting plates from antenna coupler, if required.

C INSTALL

1. Install the following:

a. Mounting plates on antenna coupler, if required.

b. Antenna coupler on base plate.

c. Four mounting bolts through mounting plate.

NOTE: There is no torque value required, do not over tighten.

(1) Tighten mounting bolts.

2. Connect connectors/straps disconnected in Step 1 B 3.

D FINAL STEPS

1. Remove Red Danger Tag(s) IAW COMDTINST 9077.1 (series).

2. Restore equipment to the normal status.

3. Record maintenance action by completing appropriate sign-off, adding pertinent remarks.

F2265C ANTENNA COUPLER

FIGURE 1