26-CB-OTH_E35011.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

26-CB-OTH-IV

E35011.0

REV'D 03/20/15

ASSET NUMBER OPERATING ACTIVITY ASSET HOURS MAINTENANCE ACCOMPLISHED

MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

SERIAL NUMBER TRACKED ITEM-ALL INFORMATION REQUIRED

ITEM 1

DUE

CMS CODE CMS CODE ACTION COMPONENT NAME CEINUM

E35016 REM/INST FLN2775A (3X7B4), REMOTE HEAD AV-E350-003

P A R T

O F F

BARCODE SERIAL NUMBER

REASON REMOVED: TIME___ TROUBLE___ CANNIBALIZATION___ OTHER___ COMPONENT STATUS: RFI__ NON RFI__

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

TECHNICIAN'S TECHNICIAN'S QUALITY ASSURANCE

SIGNATURE ID SIGNATURE

P A R T

O N

BARCODE SERIAL NUMBER

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

TECHNICIAN'S TECHNICIAN'S QUALITY ASSURANCE

SIGNATURE ID SIGNATURE

* ASTERISK INDICATES QA REQUIRED QA

REMARKS INDICATING THE REASON FOR REMOVAL ARE REQUIRED

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

Distribution Statement D: Distribution authorized to the DHS/CG/DoD and their contractors Administrative/Operational use, 03/20/15. Other requests shall be referred to the appropriate asset product line.

WARNING: This document contains technical data whose export is restricted by the Arms Export-Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C. App 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DoD 5200.22-M, National Industrial Security Program Operating Manual, Section 5-705 or DoD 5200.1-R, Information Security Program Regulation, Chapter VI, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

26-CB-OTH-IV

E35011.0

REV'D 03/20/15

ASSET NUMBER OPERATING ACTIVITY ASSET HOURS MAINTENANCE ACCOMPLISHED

MO DAY YEAR

REFERENCES

IF THE COMPONENT BEING REMOVED IS PART OF A MISHAP THEN THE FOLLOWING IS REQUIRED:

(1) PART WILL BE REMOVED “NRFI”. (2) THE REASON REMOVED WILL BE MARKED ”OTHER”. (3) THE FIRST WORD IN THE REMARKS WILL BE “MISHAP” FOLLOWED BY THE “MISHAP NUMBER”. (4) WRITE A BRIEF DESCRIPTION DESCRIBING WHAT OCCURRED. (5) ATTACH A COMPLETED COPY OF THIS

MPC SIGN-OFF SHEET TO THE “NRFI” COMPONENT PRIOR TO BEING SENT TO THE VENDOR.

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 2 of 5

26-CB-OTH-IV

E35011.0

REV'D 03/20/15

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 3 of 5

26-CB-OTH-IV

E35011.0

REV'D 03/20/15

1 FLN2775A(3X7B4), REMOTE HEAD REMOVE AND INSTALL

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

TOOLS/TESTEQUIPMENT:

NONE

EXPENDABLES:

Radio Set Control, P/N: FLN2775A, CAGE: 3X7B4, NIIN: 015424887 (Repair Part/Mandatory Turn-in Item)

CONSUMABLES:

NONE

A PRELIMINARY STEPS

1. Ensure area is safe for maintenance.

WARNING

OBSERVE SAFETY PRECAUTIONS WHEN WORKING WITH

ELECTRICAL AND ELECTRONIC EQUIPMENT. FAILURE

TO COMPLY EXPOSES PERSONNEL TO THE DANGER OF

ELECTRICAL SHOCK AND PERSONAL INJURY.

2. Identify breakers and/or switches to be tagged out for the following systems:

a. MICOM3T, HF transceiver.

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE

TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

3. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B REMOVE

1. Locate radio set control, P/N: FLN2775A, (Refer to Figure 1).

2. Disconnect the microphone cable from the front of the radio set control.

a. Disconnect the control cable from the rear of the radio set control, (Refer to Figure 2).

3. Remove two mounting screws at the rear of the radio set control.

4. Remove radio set control from mounting bracket.

C INSTALL

1. Place radio set control in mounting bracket.

2. Insert one mounting screw through each side of the mounting bracket into sides of the radio set control.

NOTE: There is no torque value required, do not over tighten.

a. Tighten mounting screws.

3. Connect the control cable to the rear of the radio set control.

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 4 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf

26-CB-OTH-IV

E35011.0

REV'D 03/20/15

4. Connect the microphone cable to the front of the radio set control, (Refer to Figure 1).

D FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

2. Restore equipment to the normal status.

3. Record maintenance action by completing appropriate sign-off, adding pertinent remarks.

FLN2775A RADIO SET CONTROL FRONT

Figure 1

FLN2775A RADIO SET CONTROL REAR

Figure 2

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 5 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf