26-CB-OTH-IV_E25042.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

26-CB-OTH-IV

E25042.0

REV'D 03/10/15

ASSET NUMBER OPERATING ACTIVITY ASSET HOURS MAINTENANCE ACCOMPLISHED

MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

SERIAL NUMBER TRACKED ITEM – ALL INFORMATION REQUIRED

ITEM 1

DUE

CMS CODE CMS CODE ACTION COMPONENT NAME CEINUM

E25042 REM/INST M20QSS9PW1 N-05(78205) UHF XCVR AV-E250-016

P A R T

O F F

BARCODE SERIAL NUMBER

PART POSITION:

REASON REMOVED: TIME___ TROUBLE___ CANNIBALIZATION___ OTHER___ COMPONENT STATUS: RFI__ NON RFI__

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

TECHNICIAN'S TECHNICIAN'S QUALITY ASSURANCE

SIGNATURE ID SIGNATURE

P A R T

O N

BARCODE SERIAL NUMBER

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

TECHNICIAN'S TECHNICIAN'S QUALITY ASSURANCE

SIGNATURE ID SIGNATURE

* ASTERISK INDICATES QA REQUIRED QA

REMARKS INDICATING THE REASON FOR REMOVAL ARE REQUIRED

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

Distribution Statement D: Distribution authorized to the DHS/CG/DoD and their contractors Administrative/Operational use, 03/10/15. Other requests shall be referred to the appropriate asset product line.

WARNING: This document contains technical data whose export is restricted by the Arms Export-Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C. App 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DoD 5200.22-M, National Industrial Security Program Operating Manual, Section 5-705 or DoD 5200.1-R, Information Security Program Regulation, Chapter VI, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

26-CB-OTH-IV

E25042.0

REV'D 03/10/15

ASSET NUMBER OPERATING ACTIVITY ASSET HOURS MAINTENANCE ACCOMPLISHED

MO DAY YEAR

REFERENCES:

NONE

IF THE COMPONENT BEING REMOVED IS PART OF A MISHAP THEN THE FOLLOWING IS REQUIRED: (1) PART WILL BE REMOVED “NRFI”. (2) THE REASON REMOVED WILL BE MARKED “OTHER”. (3) THE FIRST WORD IN THE REMARKS WILL BE “MISHAP” FOLLOWED BY THE “MISHAP NUMBER”. (4) WRITE A BRIEF DESCRIPTION DESCRIBING WHAT OCCURRED. (5) ATTACH A COMPLETED COPY OF THIS MPC SIGN-OFF

SHEET TO THE “NRFI” COMPONENT PRIOR TO BEING SENT TO THE VENDOR.

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 2 of 5

26-CB-OTH-IV

E25042.0

REV'D 03/10/15

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 3 of 5

26-CB-OTH-IV

E25042.0

REV'D 03/10/15

1 M20QSS9PW1 N-05 (78205) UHF XCVR, REMOVE AND INSTALL

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

MPC E25042.2

TOOLS/TESTEQUIPMENT:

NONE

EXPENDABLES:

Receiver-Transmitter, Radio (XTL-5000 UHF), P/N: MS0QSS9PW1 N-05, CAGE: 78205, NIIN: 015695957 (Repair Part/Mandatory Turn-in Item)

CONSUMABLES:

Cable Tie, P/N: TY5232M, CAGE: 56501, NIIN: 012162346 (If required) Marker, Identification, P/N: PCMB-3, CAGE: 06383, NIIN: 004229673 (If required)

A PRELIMINARY STEPS

1. Ensure that area is safe for maintenance.

WARNING

OBSERVE SAFETY PRECAUTIONS WHEN WORKING WITH

ELECTRICAL AND ELECTRONIC EQUIPMENT. FAILURE

TO COMPLY EXPOSES PERSONNEL TO THE DANGER OF

ELECTRICAL SHOCK AND PERSONAL INJURY.

2. Identify breakers and/or switches to be tagged out for the following systems:

a. Radio receiver-transmitter (XTL-5000 UHF).

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE

TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

3. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B REMOVE

1. Locate the XTL-5000 UHF to be removed behind the main console, (Refer to Figure 1).

2. Ensure all XTL-5000 UHF wires and cables are properly labeled.

a. Label using identification marker, P/N: PCMB-3, (If required).

3. Disconnect all wires and cables from the XTL-5000 UHF.

a. Remove cable ties, (If required).

4. Remove the XTL-5000 UHF side-mounting screws from the mounting bracket.

5. Slide the XTL-5000 UHF out of its mounting location.

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 4 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf http://cgweb.netims.uscg.mil:1088/mpcs/26-CB-OTH-IV/E25042.2/26-CB-OTH-IV_E25042.2.pdf http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf

26-CB-OTH-IV

E25042.0

REV'D 03/10/15

C INSTALL

1. Position XTL-5000 UHF, P/N: M20QSS9PW1 N-05, to be installed into its mounting location.

a. Install the side mounting screws.

NOTE: There is no torque value required, do not over tighten.

b. Tighten the side mounting screws.

2. Connect all XTL-5000 UHF wires and cables IAW labeling.

3. Install cable ties, P/N: TY5232M, (If required).

D FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

2. Program the XTL-5000 UHF for area of operation, (Comply with MPC E25042.2).

3. Record maintenance action by completing sign-off, adding pertinent remarks.

XTL-5000 UHF LOCATION

Figure 1

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 5 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf http://cgweb.netims.uscg.mil:1088/mpcs/26-CB-OTH-IV/E25042.2/26-CB-OTH-IV_E25042.2.pdf

XTL-5000 UHF LOCATION