183144S-eTCX-0210-SRV.pdf
PDF 159 KB Posted
- Attached to
- Condenser Water Filtration System Upgrade
- Solicitation number
- HC102821R0018
- Issued by
-
Defense Information Systems Agency
About this file
This request for proposal from the Defense Information Systems Agency solicits bids to upgrade the condenser water filtration, controls and piping system at their facility in San Antonio, Texas. The contractor will be required to enhance the cooling towers, replace piping, adjust the water pump, run temporary chillers for redundancy testing and adjust the water filtration controls. A site visit will be offered on March 31st, 2021 with two sessions for contractors to better understand the work. Questions must be submitted in writing by April 9th, 2021.
View the file
Other files
Show 40 more
Latest 50 of 95 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PAPER COPIES ARE UNCONTROLLED.
APPROVED ENGINEERING CHANGE ORDER (ECO).
ONLY BE INCORPORATED AS DIRECTED BY AN
MAINTAINED BY A CAD SYSTEM. CHANGES SHALL
THIS DRAWING HAS BEEN GENERATED AND IS
COMPONENT LIST:
1 ELECTRICAL CONTROL BOX 3/60/460V W/120V TRANSFORMER.
2 SEPARATOR: eHTX-0090-V.
3 PUMP: 7.5 HP CENTRIFUGAL, 1750 rpm, 3/60/460V.
4 INLET/OUTLET PRESSURE GAUGES: 0-160 psi, GLYCERIN-FILLED.
5 PURGE EQUIPMENT: SRV-833.
6 STRAINER, SUCTION DIFFUSER.
NOTES:
INLET IS 4" PIPE (125# ANSI FLANGED).1.
OUTLET IS 3" PIPE (GROOVED).2.
PURGE OUTLET IS 3/4" PIPE.3.
MAXIMUM PRESSURE: 150 psi (10.3 bar).4.
MAX FLUID OPERATING TEMPERATURE: 100ºF (37.8ºC).5.
SPECIFIED FLOW RATES:6.
BASIN SWEEPING- 210 gpm (48 m³/hr).
SIDE STREAM & CLOSED LOOP- 250 gpm (57 m³/hr).
FINISH: AS ASSEMBLED.7.
POWER REQUIREMENT: 3/60/460V. (CUSTOMER SPECIFIED)8.
NEMA 4X MOTOR STARTER ENCLOSURE WITH9.
SAFETY DISCONNECT AND H.O.A. SWITCH.
APPROXIMATE DRY WEIGHT: 1018 lbs (461 kg).10.
INLET/OUTLET VALVE KIT RECOMMENDED: SEE FACTORY.11.
MINIMUM PIPE FROM TOWER BASIN TO TC SYSTEM IS 4" PIPE.12.
FLOODED SUCTION REQUIRED.13.
SUBMITTAL DRAWING
This drawing is submitted for spatial consideration only. Do not pre-plumb to these dimensions.
FRESNO, CALIFORNIA
WWW.LAKOS.COM
FILTRATION SOLUTIONS ®
EXCEPT AS OTHERWISE PROVIDED BY CONTRACT, THIS
DRAWING AND SPECIFICATIONS SHALL NOT BE
REPRODUCED, COPIED OR USED AS THE BASIS FOR
MANUFACTURE OR SALE OF MATTER DEPICTED HEREIN
WITHOUT THE EXPRESSED WRITTEN PERMISSION OF THE
LAKOS CORPORATION, OR ITS ASSIGNEES.
2-5/8" 67
66-7/8" 1699
FRONT VIEW W/O STRAINER
3/4" 19 TYP
1" 25 TYP
1/2" 13 TYP
8-7/16" 214
19-3/8" 49236" 914
10-3/4" 273 13-1/4" 337
45" 1143
TOP VIEW
16-1/4" 413
FRONT VIEW PUMP & STRAINER
10-5/8" 270
FRONT VIEW ROTATED STRAINER (OPTIONAL)
CEE
PER LAKOS SPEC
AS ASSEMBLED 8/21/19
XYLEM PUMP
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPROVED
01 SUBMITTAL DRAWING 8/21/19 ADJ
C
D
SH
REV.
D W
G N
O
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN: INCHES [mm]
DECIMALS
MATERIAL
FINISH
.XXX
.XXXX
TOLERANCES ARE:
FRACTIONS
± ±.XX
WORK ORDER
REVIEW
ENGR
SCALE
QTY. C
SIZE
APPROVALS1/4°
± .005
.0005 ±
.01 ±
ANGLES
DRAWN
ENGINEERED FOR:
TITLE
DATE
DWG NO.
EST. WT. SHEET
REV.
eTCX-0210-SRV/XYL, TC SYSTEM HI EFFICIENCY eHTX-0090, 3/60/460V
183144 01
1:10 1 OF 1
183144
MODEL NO.
B
A A
C
D
4 12
2 14 3
8/21/19ADJDO NOT SCALE DRAWING
1018 lb
1"
| Sheet1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View5 |
| Drawing View6 |
File details come from the government source that posted it. Updated .