Attachment_08_Sample_Project_18_September_2019_1253-1581.pdf

Indoor Unit: PKA-A24KA4

Outdoor Unit: PUZ-A24NHA4 (-BS)

SPECIFICATIONS : PKA-A24KA4 & PUZ-A24NHA4 (-BS)

DIMENSIONS: PKA-A24KA4

3400 Lawrenceville Suwanee Rd Suwanee, GA 30024 www.mehvac.com

DIMENSIONS: PUZ-A24NHA4 (-BS)

C le ar an ce A re a

����!�"� #$%&'()*+ &, -.//.*+)0 +1 2) 3/)) 3/1( 0)3)4+, &* (.+)/&.5 .*0

-1/6(.*,7&' 31/ . ')/&10 13 1*) 8)./ 3/1( +7) 0.+) 13 1/&9&*.5

&*,+.55.+&1*: 2%+ *1+ +1 );4))0 )&97+))* (1*+7, 3/1( 0.+)

,7&'()*+ 3/1( 3.4+1/8: &3 &*,+.55)0: (.&*+.&*)0 .*0 1')/.+)0 %*0)/

*1/(.5 41*0&+&1*, 13 ,)/<&4)= >1('/),,1/, ./) -.//.*+)0 31/ 3&<)

8)./,= >1('5)+) -.//.*+8 0),4/&'+&1* .<.&5.25) 1* /)$%),+=

�E���

gg̀FhTMiU jWkl̀FFJ̀KỲFJm̀X̀ n̂lheRQoU pbqbarsb\ tuv tswaqbaxb[ysryabz{|} lXWg ~zĤzF̂�K lv���ba��Zayrq �waqba��b��s|��VWXYZ Z[\] Ĥ_ ̀ F̀FÌFKzcr[� Wr]b F |� FH

Width and Height furnished approximately 0.250 in. under size.

* Louver section width undersized an additional 0.25 in. to account for the sill pan.

Standard Features

Dimensions & Specifications

Model Gallon Shipping Number Capacity A B C D Weight Point-of-Use Models

EJW006FS 6 15-1/2” 14-1/4” 11” - 35

EJW010FS 10 18-1/4” 18” 12-1/2” - 54

EJW015FS 15 26” 18” 20-1/2” - 58

EJW020FS 20 22-1/4” 21-3/4” 15-1/2” - 73

Short Models

ESX030KD 30 31” 21-3/4” 24-1/4” 8” 109

ESX040KD 40 32-1/4” 24” 25-1/2” 8” 138

ESX050KD 50 32-1/4” 26-1/2” 25-1/4” 8” 184

Tall Models

ETX030KD 30 34-1/2” 20-1/2” - 8” 105

ETX040KD 40 45-1/4” 20-1/2” - 8” 122

ETX050KD 50 55” 20-1/2” - 8” 140

ETX065KD 66 60-3/4” 21-3/4” - 8” 166

ETX080KD 80 59-1/2” 24” - 8” 200

ETX120KD 119 62-1/2” 29-1/2” - 8” 337

ALTERNATE OUTLET

3/4” (FEMALE) NPTOUTLET

3/4” (FEMALE)

NPT

3/4” NPT

RELIEF VALVE

OPENING

ELECTRICAL

CONNECTION

INLET

3/4” (FEMALE)

NPT

A

B

C

FRONT VIEW

EJ 6/10/15/20

TOP VIEW

P.O.U. 6/10/15/20

Point-of-Use models Short models

3/4” NPT

RELIEF VALVE

OPENING

BRASS

DRAIN

VALVE

A C

B

OUTLET

3/4” (FEMALE)

NPT

2-1/2”

D

TOP VIEW

ES 30/40/50

FRONT VIEW

ES 30/40/50

3-3/4”

JUNCTION

BOX

OUTLET

3/4” (FEMALE)

NPT

INLET

3/4” (FEMALE)

NPT

INLET

3/4” (FEMALE)

NPTD

TOP VIEW

ET 30 - 120

JUNCTION

BOX

3/4” NPT

RELIEF VALVE

OPENING

A

B

FRONT VIEW

ET 30 - 120

3-3/4”

DRAIN

VALVE

2-1/2”

Tall models

Light Duty Commercial Models

Notes: Point of Use models are non-simultaneous circuit only. P.O.U. models available in single phase only. 6 gallon P.O.U. not available above 2500 watts or in 480 V.

Short & Tall models are factory wired for three phase service and are field converted to single phase.

Voltage Schedule (EJ Models)

C 120V 1 PH

J 208V 1 PH

A 240V 1 PH

W 277V 1 PH

V 480V 1 PH

(ES & ET Models) T 208V 1 or 3 PH P 240V 1 or 3 PH

W 277V 1 PH

X 480V 1 or 3 PH

M O

DEL

For Ease in Ordering by Model Number

This is a Tall Commercial Electric 480 volt model with a tank capacity of 50 gallons. The upper and lower elements are 4500 watts.

E T X 050 K D

TALL

ELEM

ENT Q

UANTITY

TANK CA PAC I TY

W

ATTAG

E

VO

LTAG

E

Wattage Limits w/ Simultaneous Operation

208V - 10,000W (5,000W/5,000W) 240V - 11,000W (5,500W/5,500W) 277V - 12,000W (6,000W/6,000W) 480V - 12,000W (6,000W/6,000W)

Element Availability Schedule Recovery Rate (GPH @ °F) Wattage 120V 208V 240V 277V 480V 40°F 70°F 100°F 130°F C-1500 Yes Yes Yes Yes N/A 16 9 6 5 D-1650 N/A N/A N/A N/A N/A 17 10 7 5 E-2000 Yes Yes Yes Yes N/A 21 12 8 6 F-2500 Yes Yes Yes Yes Yes 26 15 10 8 G-3000 Yes Yes Yes Yes Yes 31 18 12 10 H-3500 N/A Yes Yes N/A N/A 36 21 14 11 J-4000 N/A Yes Yes Yes Yes 41 24 17 13 K-4500 N/A Yes Yes Yes Yes 47 27 19 14 M-5000 N/A Yes* Yes* N/A Yes* 52 30 21 16 N-5500 N/A N/A Yes* N/A N/A 57 32 23 17 P-6000 N/A Yes Yes Yes Yes 62 35 25 19

Notes: Max Wattage for EJ-006 is 3000W

* Indicates Not Available for EJ-010 and EJ-015

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

Lochinvar.com

E

K-4500 Yes

480V

X 480V 1 or 3 PH

ESX030KD 30 31” 21-3/4” 24-1/4” 8” 109

© Copyright 2017 Zoeller® Co. All rights reserved.

502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com

SECTION: 2.15.090

FM2785

Supersedes

HIGH HEAD FLOW-MATE SERIES

SINGLE SEAL

DOUBLE SEAL

19-5/16" (491 mm)

6" (152 mm)

4" 8-3/4"

6-1/2"

4" (102 mm)

6-11/32" (161 mm)

1-1/2" NPT STANDARD

2" NPT

OR

3" NPT

AVAILABLE

(222 mm)

(165 mm)

(102 mm)

21-3/16” (538 mm)

6” (152 mm)

4” (102 mm)

8-3/4” (222 mm)

6-1/2” (165 mm)

4” (102 mm)

4” (102 mm)

1-1/2" NPT STANDARD

2" NPT

OR

3" NPT

FLANGE

AVAILABLE

NOTE: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.

M O

T O

R

Horse Power 1/2 (161/4161, 163/4163) or 1 (165/4165)

Voltage 115 - 575

Phase 1 or 3 Ph

Hertz 60 Hz

RPM 3450

Type Permanent split capacitor or 3 Ph

Insulation Class B

Amps 2.4 - 15.5

P U

M P

Operation Automatic or nonautomatic

Auto On/Off Points 15-3/4" (400 mm) / 5-1/4" (133 mm)

Discharge Size

Solids Handling 3/4" (19 mm) spherical solids

Cord Length 20' (6 m) standard

Cord Type 1 Ph: UL listed 3-wire neoprene cord and plug or 3 Ph: 4-wire with no plug

Max. Head 86.5' (26 m)

Max. Flow Rate 100 GPM (379 LPM)

Max. Operating Temp. 130 °F (54 °C)

Cooling

Motor Protection Auto reset thermal overload (1 Ph)

M A

T E

R

IA

LS

Upper Bearing Ball bearing

Lower Bearing Ball bearing

Mechanical Seals Carbon and ceramic

Impeller Type Non-clogging vortex

Impeller Bronze

Hardware Stainless steel

Motor Shaft SAE 1117 carbon steel or 416 stainless steel*

Gasket Neoprene square ring and gasket

Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

Tested to Standard UL778 and

Standard C22.2 No. 108

R

R LU

NOTE: See model comparison chart for specific details.

*Single seal models are built with a carbon steel motor shaft, and double seal models are built with a stainless steel motor shaft.

All Class 30 cast iron construction.

© Copyright 2017 Zoeller® Co. All rights reserved.

502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com

1. Integral float operated mechanical switch, no external control required.

2. For automatic use single piggyback variable level float switch or double piggyback variable level float switch. Refer to FM0477.

3. See FM1228 for correct model of simplex control panel.

4. See FM0712 for correct model of duplex control panel.

5. Variable level control switch 10-0743 used as a control activator, specify simplex (3) float or duplex (4) float system. Refer to FM0526.

Model

MODEL COMPARISON CERTIFICA-

TIONSSeal Mode Volts Ph Amps HP Hz Lbs Kg Simplex Duplex

M161 Single Auto 115 1 15.0 1/2 60 80 36 1 --- UL and cCSAus (2)

N161 Single Non 115 1 15.0 1/2 60 80 36 2 or 3 & 5 4 & 5 CSA (1)

N4161 Double Non 115 1 15.5 1/2 60 87 39 3 & 5 4 & 5 UL and cCSAus (2)

BN161 Single Auto 115 1 15.0 1/2 60 84 38 --- --- CSA

D161 Single Auto 230 1 7.5 1/2 60 80 36 1 --- UL and cCSAus

E161 / E4161 Single / Double Non 230 1 7.5 1/2 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 UL and cCSAus

* H161 Single Auto 200 1 8.8 1/2 60 80 36 1 --- cCSAus

* I161 / I4161 Single / Double Non 200 1 8.8 1/2 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 cCSAus

* J161 / J4161 Single / Double Non 200 3 6.4 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* F161 / F4161 Single / Double Non 230 3 5.2 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* G161 / G4161 Single / Double Non 460 3 2.9 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* BA161/BA4161 Single / Double Non 575 3 2.4 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 cCSAus

BE161 Single Auto 230 1 7.5 1/2 60 84 38 --- --- UL and cCSAus

M163 Single Auto 115 1 15.0 1/2 60 80 36 1 --- UL and cCSAus (2)

N163 / N4163 Single / Double Non 115 1 15.0 1/2 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 CSA (1)

BN163 Single Auto 115 1 15.0 1/2 60 84 38 --- --- CSA

D163 Single Auto 230 1 7.5 1/2 60 80 36 1 --- UL and cCSAus

E163 / E4163 Single / Double Non 230 1 7.5 1/2 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 UL and cCSAus

* H163 Single Auto 200 1 8.5 1/2 60 80 36 1 --- cCSAus

* I163 / I4163 Single / Double Non 200 1 8.5 1/2 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 cCSAus

* J163 / J4163 Single / Double Non 200 3 6.0 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* F163 / F4163 Single / Double Non 230 3 4.8 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* G163 / G4163 Single / Double Non 460 3 2.9 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* BA163/BA4163 Single / Double Non 575 3 2.4 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 cCSAus

BE163 Single Auto 230 1 7.5 1/2 60 84 38 --- --- UL and cCSAus

D165 Single Auto 230 1 10.2 1 60 80 36 1 --- UL and cCSAus

E165 / E4165 Single / Double Non 230 1 10.2 1 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 UL and cCSAus

* H165 Single Auto 200 1 12.6 1 60 80 36 1 --- cCSAus

* I165 / I4165 Single / Double Non 200 1 12.6 1 60 80 / 87 36 / 39 2 or 3 & 5 4 & 5 cCSAus

* J165 / J4165 Single / Double Non 200 3 7.5 1 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* F165 / F4165 Single / Double Non 230 3 7.4 1 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* G165 / G4165 Single / Double Non 460 3 3.7 1 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

* BA165/BA4165 Single / Double Non 575 3 3.0 1 60 80 / 87 36 / 39 3 & 5 4 & 5 cCSAus

BE165 Single Auto 230 1 10.2 1 60 84 38 --- --- UL and cCSAus

* no molded plug (1) UL listed unit available with 20 Amp plug. (2) 20 Amp duplex receptacle, P/N 10-0060 available.

Additional cords lengths are available in 25' (8 m), 35' (11 m), and 50' (15 m).

All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA).CAUTION

* G161 / G4161 Single / Double Non 460 3 2.9 1/2 60 80 / 87 36 / 39 3 & 5 4 & 5 UL and cCSAus

SECTION: 2.50.200

FM1228

Supersedes

Product information presented of publication. Consult factory regarding discrepancies or inconsistencies.

MAIL TO:

SHIP TO:

visit our web site:

www.zoeller.com

Your Peace of Mind is Our Top Priority®

SINGLE PHASE SIMPLEX CONTROL PANELS

MODEL # VOLTS PHASE AMPS HP Plug-In Panel* Circuit Breaker Disconnect

(1)

(2)

(3)

(4)

(5)

SUMP/SEWAGE BASINS

CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.

Products may not be exactly as pictured.

NOTE: Polyethylene basins should be used for indoor installations only.

SECTION: 2.70.010

FM0487

Supersedes

• Available in high density polyethylene structural foam (PSF), polyethylene or

• Ideal for residential, commercial and industrial applications

• Available with 2" or 3" vent and 2" or 3" discharge

• Lid with gasket and 4" cast iron inlet hub with anticorrosion coating are included with the sewage basins

• Centerline of hub is located 10-1/2" from top of basin (std.). Custom locations available

• Polyethylene sewage pump basins are IAPMO approved. For 10' stack test models, refer to charts on pages 2 and 3

• Sealed (Radon) basins for sump pumps in 18" x 22" and 18" x 30" sizes

• Polyethylene sump basin available with plastic unsealed covers in 18" x 22"

• Sewage basins are watertight and gastight when properly installed

• Durable steel cover with gasket standard on simplex and duplex sewage basins

• One piece, seamless construction on all basins

• Duplex covers include two pump plates and inspection plate

• Ready to install for economical and simple installation

• Dimensional Engineering data available

• Temperature rated 130°F

• Fiberglass models available that will pass the 10' water stack test (Refer to charts on pages 2 and 3) (L. A. - RR-5311) with 10' water stack test.

COMPARE THESE FEATURES

18" SUMP BASIN COVERS AND EXTENSIONS

SIMPLEX SEWAGE BASINSUMP AND RADON BASINS SEWAGE BASINS

P/N 31-1608

18" x 30" Premium Basin with Split Cover, AFD, Torque Stops, Black. 18" x 22" Heavy Duty Polyethylene, no inlet hole and hub (P/N 31-0444).

18" x 22" Radon basin with inlet and hub (P/N 31-0251).

18" x 30" Poly, 4" inlet-grommet (loose), no inlet hole. Includes one-piece blank poly cover w/cord seal (P/N 31-1855).

One Piece, Polyethylene with 1-1/2" Discharge and Cord Grommet.

P/N 17-0294

One Piece, Polyethylene Molded with 3" x 13" Opening.

P/N 17-0135 P/N 17-0131

One Piece, Steel with 3" Vent, 1-1/2" Discharge, and Cord Grom-met (Radon Lid).L d)..)))))).).).)

Basin Extensions, for use with PSF 18" diameter basins:

31-1476 - 6" riser extension w/ hardware.

31-1473 - 12" riser extension w/ hardware.

P/N 31-1476

Product information presented of publication. Consult factory regarding discrepancies or inconsistencies.

MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961

TEL: (502) 778-2731 • 1 (800) 928-PUMP • FAX: (502) 774-3624

Visit our web site:

zoellerpumps.com

Basin Extensions, for use with PSF, 18" diameter basins:

31-1473 - 12" riser extension w/ hardware.

2" Vent 3" Vent Basin Covers Size 2" 2" 3" Style IAPMO Style IAPMO 4" Inlet Discharge Discharge Discharge Listed Capable 18" X 30" 31-0081 N/A N/A Poly N Steel - Split N Fiberglass Hub 18" X 30" 31-0091 31-0084 31-0082 Poly Y Steel - Solid N Fiberglass Hub 18" X 30" 31-0154 31-0157 31-0155 Fiberglass N Steel - Split N Cast Iron Hub 18" X 30" 31-0159 31-0162 31-0161 Poly Y Steel - Solid - 10' Stack Y Pipe Seal 18" X 30" 31-0214 31-0217 31-0215 Fiberglass N Steel - Solid - 10' Stack Y Cast Iron Hub 18" X 30" 31-0608 N/A N/A Poly (Integral Side Vent) N Poly - Solid N Pipe Seal 18" X 30" 31-0615 N/A N/A Poly Y Steel - Solid N Pipe Seal 18" X 30" 31-1098 N/A N/A PSF N Poly - Solid N Combo Hub 18" X 30" 31-1099 31-1101 31-1100 PSF N Poly - Split N Combo Hub 18" X 30" 31-1338 31-1338 N/A PSF N Poly - Solid N Snap-In Hub 24" X 24" 31-1997 N/A N/A Poly N Poly - Solid N Pipe Seal 24" X 30" 31-0004 31-0027 31-0006 Fiberglass N Steel - Solid N Cast Iron Hub 24" X 30" 31-0039 31-0042 31-0040 Poly N Steel - Solid N Cast Iron Hub 24" X 30" 31-0218 31-0221 31-0219 Fiberglass N Steel - Solid -10' Stack Y Cast Iron Hub 24" X 36" 31-1102 31-1104 31-1103 PSF N FG - Solid N Combo Hub

COMBO HUB

(Poly Structural Foam Only)

THREE BOLT HUB

FOR DWV PIPE

PIPE SEAL

HUB

DUPLEX BASIN AND COVER INCLUDES:

Discharge and Vent Flange Cord Seals 4" Inlet Hub - Cast Iron Shown Inspection Plate Gaskets and hardware

SIMPLEX BASIN and COVER INCLUDES:

Discharge and Vent Flange Cord Seal 4" Inlet Hub Gaskets and hardware

SIMPLEX SEWAGE BASINS DUPLEX SEWAGE BASINS

SNAP-IN HUB

(Poly Structural Foam Only)

18" x 30" Polyethylene Structural Foam (PSF), Polyethylene or Fiberglass 24" x 30" Polyethylene or Fiberglass

30" x 36" Polyethylene or Fiberglass 36" x 36" Polyethylene or Fiberglass 48" x 48" Fiberglass

Item No. Description 31-0444 Polyethylene Basin without Hub & Hole - 18" x 22" 31-0251 Polyethylene Basin with Inlet Hole, without Hub - 18" x 22"

SUMP BASINS

SUMP BASIN COVERS

Item No. Description 17-0135 18" Cover - 1 Piece, Polyethlene Molded with 3" x 13" Opening 17-0131 18" Cover - 1 Piece, Steel w/ 3" Vent, 1½" Discharge, & Cord Grommet (Radon Lid) 17-0294 18" Cover - 1 Piece, Polyethylene w/ 1 ½" Discharge & Cord Grommet

Item No. Description 31-2228 PSF Basin predrilled 4" inlet, no hub, w/ torque stops - 18" x 30" 31-2229 PSF Basin predrilled 4" inlet, no hub, no torque stops - 18" x 30" 31-2325 PSF Basin no hole, no hub, no torque stops - 18" x 30" 31-2379 PSF Basin predrilled 4" inlet, w/ 4" pipe seal, w/ torque stops 31-2380 PSF Basin predrilled 4" inlet, w/ 4" pipe seal, no torque stops

ADDITIONAL INFO FOR PSF BASINS

SIMPLEX SEWAGE BASINS

18" x 30"

Poly Poly

31 0081 31-0091

2" Vent chargeDissc 2"2 h

18 X 30 18" X 30"

Steel Steel -

Split Solid

Fiberglass Hub Fiberglass Hub

Hub Size All Basin Hole Size (Pipe Seal Grommets) Sizes Required in Basin 1¼" 008813 2" 1¼" 009838 3" 1½" 005882 2-1/2" 1½" 009170 3" 2" 005588 3" 3" 005587 4" 4" 005196 5" 6" 009850 7"

NOTE: Basins are not designed to be installed where saturated soil hydrostatic pressure extends above the top of the pit unless the pressure is relieved by an independent drainage system.

Basin cover vent and discharge seals may be rubber insert or

CONSULT FACTORY FOR LARGER SIZE

BASINS OR SPECIAL APPLICATIONS.

Size Steel Split Steel Solid Poly Solid Poly Split Fiberglass 18" 0.075 0.115 0.345 0.312 N/A 24" N/A 0.115 N/A 0.343 N/A 30" N/A 0.125 N/A N/A 0.250 36" N/A 0.125 N/A N/A 0.375 48" N/A 0.250 N/A N/A 0.500

Size PSF Poly Fiberglass 18" x 30" 0.200 0.200 0.188 24" x 30" N/A 0.200 0.188 24" x 36" 0.250 N/A N/A 30" x 36" 0.312 0.230 0.188 36" x 36" N/A 0.230 0.188 48" x 48" N/A N/A 0.250

Hub Size Basin Size (Flat Mount - Cast Iron) 18" 24" 30" 36" 42" 48"

Curved mount requires mounting on curved side of basin.

Hub Size Basin Size (Curved Mount - Cast Iron) 18" 24" 30" 36" 42" 48" 2" 010749 010749 010749 010749 010749 010749 3" 010124 010124 010124 010124 010124 010124

4" NA 004997 004997 004997 004997 004997

6" NA 007818 007818 007818 007818 007818

8" NA 010057 010057 010057 010057 010057

Hub Size Basin Size (Poly structural foam only) (Combo Hub) 18" 24" 30"

3" 013505 013505 013505

4" 012094 012094 012094

2" Vent 3" Vent Basin Covers Size 2" 2" 3" Style IAPMO Style IAPMO 4" Inlet Discharge Discharge Discharge Listed Capable 30" X 36" 31-1105 31-1107 31-1106 PSF N Solid - FG*- Duplex N Combo Hub 30" X 36" 31-0043 31-0046 31-0044 Poly N Steel - Solid - Duplex N Cast Iron Hub 30" X 36" 31-0071 31-0074 31-0072 Fiberglass N Steel - Solid - Duplex N Cast Iron Hub 30" X 36" 31-0222 31-0225 31-0223 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub 36" X 36" 31-0047 31-0050 31-0048 Poly N Steel - Solid - Duplex N Cast Iron Hub 36" X 36" 31-0010 31-0057 31-0011 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub 48" X 48" 31-0124 31-0127 31-0125 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub

Available in:

Size Gallon

Capacity A B C D E Str.

Foam Poly x x 18” x 30” 30 30" 16½" 18" 22" 10½"

NA x 24” x 30” 60 30" 24" 26" 30" 10½" x NA 24” x 36” 72 36" 22½" 25½" 30" 10½"

NA x 30” x 36” 108 36" 30” 32" 36" 10½"

NA x 36” x 36” 159 36" 36" 38" 42" 10½"

NA NA 48” x 48” 376 48" 48" 48½" 55½" 10½"

Fiber Glass Size

Gallon Capacity A B C D E x 18” x 30” 30 30" 18" 18" 22" 10½" x 24” x 30” 60 30" 24" 24" 30" 10½" x 30” x 36” 108 36" 30” 30" 36" 10½" x 36” x 36” 159 36" 36" 36" 42" 10½" x 48” x 48” 376 48" 48" 48" 55½" 10½"

18” x 30”

OUTDOOR BASINS AND ACCESSORIES

SIMPLEX OUTDOOR BASINS - FIBERGLASS ONLY - NO HOLES DRILLED

Size Item No. Description

Item No. Color Material Size Dimension (W x H) Pipe Area Screen Area

DUPLEX OUTDOOR BASINS - FIBERGLASS ONLY - NO HOLES DRILLED

Size Item No. Description W X H

OUTDOOR TANK VENTS

DUPLEX COVER

ACCESS PLATE

INSPECTION PLATE

SIMPLEX COVER

OUTDOOR INDOOR

Solid Fiberglass Cover

Fiberglass Basin with Anti-Flotation

Ring H

W

MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961

(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 Visit our web site:

zoellerpumps.com

BARGE DESIGN SOLUTIONS

BLDG 257

FIRE PUMP FEEDER

100HP FIRE PUMP

MOTOR WIRE SIZE

FLA 124 A @ 480V

125% Motor Requirement 155 A

MISC 20 A

TOTAL 175 A

WIRE SIZE #3/0 AWG WIRE

VOLTAGE DROP (LESS THAN 15%)

Distance 350 FT Wire Size #3/0

LCR 725A

Calculated Voltage Drop 7.30%

VT Series Volumetric LED Troffer

2VTL

2' x 4'

LED

LED 2VTL2X4

Catalog

Number

Notes

Type

FEATURES & SPECIFICATIONS

INTENDED USE — The VT Series Volumetric LED Troffer (VTL) combines the aesthetics and high performance with intelligent LED engines for applications such as offices, schools, retail locations and hospitals. High-efficacy light engines deliver long life and excellent color, ensuring a superior quality lighting installation that is highly efficient and sustainable. Multiple lumen packages and driver options provide solutions for all your lighting applications.

Featured nLight control system provides design flexibility and ease of installation and optimum energy savings.

CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication with embossed facets. Impact-modified, single clear acrylic diffuser provides excellent shielding and wide distribution. End plates include integral T-bar clips. Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".

OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions, vertical and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced, complementary luminous environment. Linear faceted reflector cavity softens and distributes light into the space while minimizing luminous contrast between the fixture and ceiling. Sloped end plates provide a smooth, luminous transition between fixture and ceiling while enhancing the perception of fixture depth.

High-performance diffuser provides LED concealment, even illumination across the diffuser and improved lumen-per-watt performance.

Now available with two different aesthetics including the standard Acrylic Linear Prismatic Diffuser (ADP) and the Acrylic Linear Prismatic Diffuser with Diffuser Trim Rings (ADPT).

ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 80% LED lumen maintenance at 60,000 hours (L80/60,000).

eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI.

Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight enabled control devices and the VTL luminaires using standard Cat-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission.

Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

Driver disconnect provided where required to comply with US and Canadian codes.

SENSOR— Integrated sensor (individual control): Sensor Switch MSD7ADCX (Passive infrared (PIR)) or MSDPDT7ADCX (PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering the space. See page 2 for more details on the integrated sensor.

Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.

See page 2 for the nLight sensor options.

Integrated Smart Sensor (nLight Air Wireless Platform): The rES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is both a digital PIR occupancy sensor/automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 3 for more details on the Integrated Smart Sensor.

INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16" tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall ceiling adaptors available. Suitable for damp location.

LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

NOTE: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

VT

ADP

ADPT

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks when ordered with drivers marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details

8-1/4 (21)

(61.0)

4-3/8 (11.1)

Specifications

Length: 48 (122.0)

Width: 24 (61.0)

Depth: 4-3/8 (11.1)

Dimensions All dimensions are inches (centimeters) unless otherwise specified.

2VTL2X4

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

Accessories: Order as separate catalog number.

2VT4 F916 Trim to adjust fixture mounting flush with 9/16" T-bar; for 2x4 fixture

DGA24 FS/VT Drywall ceiling adapter with trim kit

A+ Capable options indicated by this color background.

Notes

1 Approximate lumen output.

2 Not available with SLD, EL7L, or EL14L 3 Not available with N80, N80EMG, N100, or N100EMG.

4 Gateway not included. Requires on-site commissioning. Visit www.

lightingcontrols.com/XPointWireless for more information.

5 nLight EMG option requires a connection to existing nLight network.

Power is provided from a separate N80 or N100 enabled fixture.

6 Must order with RES7N or RES7Z sensor. Only available with EZ1 or

EZB driver. Not available with 72L option.

7 Must specify ADPT diffuser. See sensor section on page 3.

8 Requires N80, N80EMG, N100, or N100EMG.

9 Only available with EXA1 or EXAB driver options.

10 Only available with EZ1 or EZB driver option. 0-10V dimming wires not accessible via access plate.

11 Only available with EZ1 driver option. 0-10V dimming wires not accessible via access plate.

12 For more information, please see the PSSD2 specification sheet.

nLight® Wired Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight.

WallPod stations Model number Occupancy sensors Model number

On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJB

On/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJB

Graphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color]

Photocell controls Model number Cat-5 cable (plenum rated) Model number

Full range dimming nCM ADCX RJB 10' cable CAT5 10FT J1

30' cable CAT5 30FT J1 nLight® AIR Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/ products/controls/nlightair.

Wall switches Model number

On/Off single pole rPODB [color]

On/Off two pole rPODB 2P [color]

On/Off & raise/lower single pole rPODB DX [color]

On/Off & raise/lower two pole rPODB 2P DX [color]

On/Off & raise/lower single pole rPODBZ DX WH1

Notes

1 Can only be ordered with the RES7Z zone control sensor version.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 2VTL4 40L ADPT EZ1 LP840 MSD7ADCX

2VTL4

Series Air function Lumens1 Diffuser Voltage Driver

2VTL4 2X4 VTL (blank) Static

H Heat removal

30L 3000 lumens

40L 4000 lumens

48L 4800 lumens

60L 6000 lumens

72L 7200 lumens

ADP Acrylic linear prismatic

ADPT Acrylic linear prismatic with diffuser trim rings

(blank) MVOLT

347 347V2

EZ1 eldoLED dims to 1%, 0-10V

EZB eldoLED dims to dark, 0-10V

EDB eldoLED DALI3

EXB eldoLED DMX/RDM3

SLD Step-level dimming3

EXA1 Dims to 1%, XPoint wireless enabled4

EXAB Dims to dark, XPoint Wireless enabled4

Color temperature Controls Occupancy Control Options

LP830 3000 K, 80 CRI

LP835 3500 K, 80 CRI

LP840 4000 K, 80 CRI

LP850 5000 K, 80 CRI

(blank) No nLight®

N80 nLight® with 80% lumen management

N80EMG nLight® with 80% lumen management for use with generator supply EM power5

N100 nLight® without lumen management

N100EMG nLight® without lumen management for use with generator supply EM power5

NLTAIR nLight AIR enabled6

(blank) No sensor control nLight Wired Networking

NES7 nLight® nES 7 PIR integral occupancy sensor7,10

NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control7,10

NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell7,10

NESPDT7ADCX nLight® nES 7 PDT 7 dual technology intergral occupancy sensor with automatic dimming photocell7,10

Individual Control

MSD7ADCX PIR integral occupancy sensor with automatic dimming control photocell3,7,11

MSDPDT7ADCX PDT integral occupancy sensor with automatic dimming control photocell3,7,11

Xpoint Wireless

XADS7 XPoint™ wireless controller and micro 360° PIR occupancy and photocell sensor3,4,9 nLight Wireless Networking

RES7N nLight® AIR PIR integral occupancy sensor with automatic dimming photocell for Networking Capabilities 7,10 nLight Wireless Zone

RES7Z nLight® AIR PIR integral occupancy sensor with automatic dimming photocell for zone control 7,10

EL7L 700 lumen battery pack (non-CEC compliant)

EL14L 1400 lumen battery pack (non-CEC compliant)

EL14LSD 1400 lumen battery pack with self-diagnostic testing feature (non-CEC compliant) 12

E10WLCP EM Self-Diagnostic battery pack, 10W Constant Power, CEC compliant

CP Chicago plenum

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

NH NH NH

rPODB 2P DX Mobile Device

BLT Series

1. Install the nLight® AIR fixtures with embedded smart sensor

2. Install the wireless battery-powered wall switch

3. With our CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the intended outcome

Simple as 1,2,3

Sensor Options

Option Automatic

Dimming Photocell

Occupancy Sensing nLight Wired Networking nLight AIR Networking nLight AIR ZonePIR PDT

MSD7ADCX X X

MSDPDT7ADCX X X

NES7 X X

NES7ADCX X X X

NESPDT7 X X

NESPDT7ADCX X X X

RES7N X X X

RES7Z X X X

Integrated Sensor with Individual Control

The MSD7ADCX PIR occupancy sensor/automatic dimming photocell is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving.

The MSDPDT7ADCX PIR/Microphonics Dual Tech occupancy sensor/automatic dimming photocell is ideal for areas with obstructions and where daylight harvesting is desired. Suggested applications include, but not limited to, open offices, private offices, classrooms, public restrooms, and conference rooms.

Sequence of Operation

MIN

LI

G

H T

LE

V

EL

MAX

7.5 MIN

TIME DELAY

2.5 MIN AT

A 1% LEVEL

LIGHTS OFF LIGHTS ONLIGHTS ON

Room Unoccupied

Occupants Detected In The Space

Sensor Detects Motion

MOTION NO MOTION MOTION

5.5 18

4.6 15

3.7 12

2.7 9

1.8 6

0.9 3 0 m 0 ft

0.9 3

1.8 6

2.7 9

3.7 12

4.6 15

5.5 18

9 FT Mounting

• Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)

• Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and

• 1.75x up to 20 ft (6.10 m).

• Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)

• Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor

Sensor Coverage Pattern

Mini 360° Lens

Basic nLight Zone

*The presetting on the automatic dimming photocell is 5fc.

nLight Wired Networking

The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms.

Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls.

For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy.

Additionally, the NESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present.

nLight AIR Wireless nLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated rES 7 smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.

Sequence of Operation

MIN

LI

G

H T

LE

V

EL

MAX

17.5 MIN

TIME DELAY

2.5 MIN AT

A 1% LEVEL

LIGHTS OFF LIGHTS ONLIGHTS ON

Room Unoccupied

Occupants Detected In The Space

Sensor Detects Motion

MOTION NO MOTION MOTION

*The presetting on the automatic dimming photocell is 5fc.

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

PHOTOMETRICS

2VTL4 40L ADP LP835, 4393 delivered lumens, test no. LTL24782P105, tested in accordance to IESNA LM-79

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

25.4 41.7 74.8

100.0 0.0

100.0

25.4 41.7 74.8

100.0 0.0

100.0

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

Mounting data

9/16 with accessory 2VT4 F916

9/16 15/16

SS

Performance Data

Lumen Package Lumens Input Watts2 LPW

30L ADP LP830 3305 26.4 125

30L ADP LP835 3470 26.4 132

30L ADP LP840 3836 26.4 146

30L ADP LP850 3824 26.4 145

40L ADP LP830 4164 33.2 126

40L ADP LP835 4393 33.2 133

40L ADP LP840 4501 33.2 136

40L ADP LP850 4823 33.2 145

48L ADP LP830 4820 39.1 123

48L ADP LP835 5090 39.1 130

48L ADP LP840 5209 39.1 133

48L ADP LP850 5586 39.1 143

60L ADP LP830 5288 44.2 120

60L ADP LP835 5582 44.2 126

60L ADP LP840 5738 44.2 130

60L ADP LP850 6122 44.2 138

72L ADP LP830 7044 58.7 120

72L ADP LP835 7182 58.7 122

72L ADP LP840 7714 58.7 132

72L ADP LP850 8141 58.7 139

Note: Based on ADP diffuser

How to Calculate Delivered Lumens in

Emergency Mode

Use the formula below to determine the delivered lumens in emergency mode

Delivered Lumens = 1.25 x P x LPW

P = Ouput power of emergency driver. P = 10W for

E10WLCP option.

LPW = Lumen per watt rating of the luminaire. This information is available on the ABL luminaire spec sheet. LPW = Lumen per watt rating of the luminaire.

LPW information available in Performance Data section.

2' x 4'

LED

LED 2VTL2X4

Catalog

Number

Notes

Type

FEATURES & SPECIFICATIONS

INTENDED USE — The VT Series Volumetric LED Troffer (VTL) combines the aesthetics and high performance with intelligent LED engines for applications such as offices, schools, retail locations and hospitals. High-efficacy light engines deliver long life and excellent color, ensuring a superior quality lighting installation that is highly efficient and sustainable. Multiple lumen packages and driver options provide solutions for all your lighting applications.

Featured nLight control system provides design flexibility and ease of installation and optimum energy savings.

CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication with embossed facets. Impact-modified, single clear acrylic diffuser provides excellent shielding and wide distribution. End plates include integral T-bar clips. Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".

OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions, vertical and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced, complementary luminous environment. Linear faceted reflector cavity softens and distributes light into the space while minimizing luminous contrast between the fixture and ceiling. Sloped end plates provide a smooth, luminous transition between fixture and ceiling while enhancing the perception of fixture depth.

High-performance diffuser provides LED concealment, even illumination across the diffuser and improved lumen-per-watt performance.

Now available with two different aesthetics including the standard Acrylic Linear Prismatic Diffuser (ADP) and the Acrylic Linear Prismatic Diffuser with Diffuser Trim Rings (ADPT).

ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 80% LED lumen maintenance at 60,000 hours (L80/60,000).

eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI.

Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight enabled control devices and the VTL luminaires using standard Cat-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission.

Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

Driver disconnect provided where required to comply with US and Canadian codes.

SENSOR— Integrated sensor (individual control): Sensor Switch MSD7ADCX (Passive infrared (PIR)) or MSDPDT7ADCX (PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering the space. See page 2 for more details on the integrated sensor.

Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.

See page 2 for the nLight sensor options.

Integrated Smart Sensor (nLight Air Wireless Platform): The rES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is both a digital PIR occupancy sensor/automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 3 for more details on the Integrated Smart Sensor.

INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16" tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall ceiling adaptors available. Suitable for damp location.

LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

NOTE: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

VT

ADP

ADPT

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks when ordered with drivers marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details

8-1/4 (21)

(61.0)

4-3/8 (11.1)

Specifications

Length: 48 (122.0)

Width: 24 (61.0)

Depth: 4-3/8 (11.1)

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

Accessories: Order as separate catalog number.

2VT4 F916 Trim to adjust fixture mounting flush with 9/16" T-bar; for 2x4 fixture

DGA24 FS/VT Drywall ceiling adapter with trim kit

A+ Capable options indicated by this color background.

Notes

1 Approximate lumen output.

2 Not available with SLD, EL7L, or EL14L 3 Not available with N80, N80EMG, N100, or N100EMG.

4 Gateway not included. Requires on-site commissioning. Visit www.

lightingcontrols.com/XPointWireless for more information.

5 nLight EMG option requires a connection to existing nLight network.

Power is provided from a separate N80 or N100 enabled fixture.

6 Must order with RES7N or RES7Z sensor. Only available with EZ1 or

EZB driver. Not available with 72L option.

7 Must specify ADPT diffuser. See sensor section on page 3.

8 Requires N80, N80EMG, N100, or N100EMG.

9 Only available with EXA1 or EXAB driver options.

10 Only available with EZ1 or EZB driver option. 0-10V dimming wires not accessible via access plate.

11 Only available with EZ1 driver option. 0-10V dimming wires not accessible via access plate.

12 For more information, please see the PSSD2 specification sheet.

nLight® Wired Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight.

WallPod stations Model number Occupancy sensors Model number

On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJB

On/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJB

Graphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color]

Photocell controls Model number Cat-5 cable (plenum rated) Model number

Full range dimming nCM ADCX RJB 10' cable CAT5 10FT J1

30' cable CAT5 30FT J1 nLight® AIR Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/ products/controls/nlightair.

Wall switches Model number

On/Off single pole rPODB [color]

On/Off two pole rPODB 2P [color]

On/Off & raise/lower single pole rPODB DX [color]

On/Off & raise/lower two pole rPODB 2P DX [color]

On/Off & raise/lower single pole rPODBZ DX WH1

Notes

1 Can only be ordered with the RES7Z zone control sensor version.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 2VTL4 40L ADPT EZ1 LP840 MSD7ADCX

2VTL4

Series Air function Lumens1 Diffuser Voltage Driver

2VTL4 2X4 VTL (blank) Static

H Heat removal

30L 3000 lumens

40L 4000 lumens

48L 4800 lumens

60L 6000 lumens

72L 7200 lumens

ADP Acrylic linear prismatic

ADPT Acrylic linear prismatic with diffuser trim rings

(blank) MVOLT

347 347V2

EZ1 eldoLED dims to 1%, 0-10V

EZB eldoLED dims to dark, 0-10V

EDB eldoLED DALI3

EXB eldoLED DMX/RDM3

SLD Step-level dimming3

EXA1 Dims to 1%, XPoint wireless enabled4

EXAB Dims to dark, XPoint Wireless enabled4

Color temperature Controls Occupancy Control Options

LP830 3000 K, 80 CRI

LP835 3500 K, 80 CRI

LP840 4000 K, 80 CRI

LP850 5000 K, 80 CRI

(blank) No nLight®

N80 nLight® with 80% lumen management

N80EMG nLight® with 80% lumen management for use with generator supply EM power5

N100 nLight® without lumen management

N100EMG nLight® without lumen management for use with generator supply EM power5

NLTAIR nLight AIR enabled6

(blank) No sensor control nLight Wired Networking

NES7 nLight® nES 7 PIR integral occupancy sensor7,10

NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control7,10

NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell7,10

NESPDT7ADCX nLight® nES 7 PDT 7 dual technology intergral occupancy sensor with automatic dimming photocell7,10

Individual Control

MSD7ADCX PIR integral occupancy sensor with automatic dimming control photocell3,7,11

MSDPDT7ADCX PDT integral occupancy sensor with automatic dimming control photocell3,7,11

Xpoint Wireless

XADS7 XPoint™ wireless controller and micro 360° PIR occupancy and photocell sensor3,4,9 nLight Wireless Networking

RES7N nLight® AIR PIR integral occupancy sensor with automatic dimming photocell for Networking Capabilities 7,10 nLight Wireless Zone

RES7Z nLight® AIR PIR integral occupancy sensor with automatic dimming photocell for zone control 7,10

EL7L 700 lumen battery pack (non-CEC compliant)

EL14L 1400 lumen battery pack (non-CEC compliant)

EL14LSD 1400 lumen battery pack with self-diagnostic testing feature (non-CEC compliant) 12

E10WLCP EM Self-Diagnostic battery pack, 10W Constant Power, CEC

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

NH NH NH

rPODB 2P DX Mobile Device

BLT Series

1. Install the nLight® AIR fixtures with embedded smart sensor

2. Install the wireless battery-powered wall switch

3. With our CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the intended outcome

Simple as 1,2,3

Sensor Options

Option Automatic

Dimming Photocell

Occupancy Sensing nLight Wired Networking nLight AIR Networking nLight AIR ZonePIR PDT

MSD7ADCX X X

MSDPDT7ADCX X X

NES7 X X

NES7ADCX X X X

NESPDT7 X X

NESPDT7ADCX X X X

RES7N X X X

RES7Z X X X

Integrated Sensor with Individual Control

The MSD7ADCX PIR occupancy sensor/automatic dimming photocell is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving.

The MSDPDT7ADCX PIR/Microphonics Dual Tech occupancy sensor/automatic dimming photocell is ideal for areas with obstructions and where daylight harvesting is desired. Suggested applications include, but not limited to, open offices, private offices, classrooms, public restrooms, and conference rooms.

Sequence of Operation

MIN

LI

G

H T

LE

V

EL

MAX

7.5 MIN

TIME DELAY

2.5 MIN AT

A 1% LEVEL

LIGHTS OFF LIGHTS ONLIGHTS ON

Room Unoccupied

Occupants Detected In The Space

Sensor Detects Motion

MOTION NO MOTION MOTION

5.5 18

4.6 15

3.7 12

2.7 9

1.8 6

0.9 3 0 m 0 ft

0.9 3

1.8 6

2.7 9

3.7 12

4.6 15

5.5 18

9 FT Mounting

• Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)

• Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and

• 1.75x up to 20 ft (6.10 m).

• Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)

• Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor

Sensor Coverage Pattern

Mini 360° Lens

Basic nLight Zone

*The presetting on the automatic dimming photocell is 5fc.

nLight Wired Networking

The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms.

Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls.

For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy.

Additionally, the NESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present.

nLight AIR Wireless nLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated rES 7 smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.

Sequence of Operation

MIN

LI

G

H T

LE

V

EL

MAX

17.5 MIN

TIME DELAY

2.5 MIN AT

A 1% LEVEL

LIGHTS OFF LIGHTS ONLIGHTS ON

Room Unoccupied

Occupants Detected In The Space

Sensor Detects Motion

LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2011-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/09/17

2VTL Volumetric Recessed Lighting 2'x4'

PHOTOMETRICS

2VTL4 40L ADP LP835, 4393 delivered lumens, test no. LTL24782P105, tested in accordance to IESNA LM-79

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

25.4 41.7 74.8

100.0 0.0

100.0

25.4 41.7 74.8

100.0 0.0

100.0

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

Mounting data

9/16 with accessory 2VT4 F916

9/16 15/16

SS

Performance Data

Lumen Package Lumens Input Watts2 LPW

30L ADP LP830 3305 26.4 125

30L ADP LP835…