FA8219-18-R-0010-0004.pdf

FA8219-18-R-0010-0004

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

Pre-Fabricated Temporary Facility T-2728

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

DEPARTMENT OF THE AIR FORCE

DIRECTORATE OF CONTRACTING

AFNWC PZBG

6008 WARDLEIGH ROAD

BLDG 1580, HILL AIR FORCE BASE UT 84056-5837

BUYER: Brogan L. Fullmer/AFNWC Brogan.Fullmer@US.AF.Mil Phone: (801) 586- 6521 No Collect Calls

DEPARTMENT OF THE AIR FORCE

DIRECTORATE OF CONTRACTING

AFNWC PZBG

6008 WARDLEIGH ROAD

BLDG 1580, HILL AIR FORCE BASE UT 84056-5837

CONTRACTING OFFICER: Jeremy M. Bodin/AFNWC Jeremy.Bodin@US.AF.Mil Phone: (801) 777-1264 No Collect Calls

REQUISITION NUMBER: F2DCAH7241B103

SOLICITATION NUMBER: FA8219-18-R-0010

SOLICITATION ISSUE DATE: 28 February 2018 OFFER DUE DATE/LOCAL TIME: 29 March 2018 at 2:00 p.m. Mountain Standard Time

SOLICITATION AMENDMENT NUMBER: FA8219-18-R-0010-0001

SOLICITATION AMENDMENT ISSUE DATE: 14 March 2018 OFFER DUE DATE/LOCAL TIME: 29 March 2018 at 2:00 p.m. Mountain Standard Time

SOLICITATION AMENDMENT NUMBER: FA8219-18-R-0010-0002

SOLICITATION AMENDMENT ISSUE DATE: 23 March 2018 OFFER DUE DATE/LOCAL TIME: 12 April 2018 at 2:00 p.m. Mountain Daylight Time

SOLICITATION AMENDMENT NUMBER: FA8219-18-R-0010-0003

SOLICITATION AMENDMENT ISSUE DATE: 27 March 2018 OFFER DUE DATE/LOCAL TIME: 12 April 2018 at 2:00 p.m. Mountain Daylight Time

SOLICITATION AMENDMENT NUMBER: FA8219-18-R-0010-0004

SOLICITATION AMENDMENT ISSUE DATE: 10 April 2018 OFFER DUE DATE/LOCAL TIME: 17 April 2018 at 2:00 p.m. Mountain Daylight Time

Solicitation incorporates by reference FAR 52.212-1, 52.212-4. FAR 52.212-3 and 52.212-

Addenda are attached

DO/DX: DO B1 0

SCD: A

ROUTINE

THIS IS A TOTAL SMALL BUSINESS SET-ASIDE.

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No awards will be made under this solicitation until funds are available. The Government reserves the right to cancel the solicitation prior to or after the closing date. The Government is under no obligation to reimburse Offeror(s) for any costs incurred in the event the Government cancels this solicitation.

Offeror(s) shall submit volumes in accordance with Federal Acquisition Regulation (FAR) 52.212-1 --Instructions to Offerors -- Commercial Items.

A pre-proposal conference was conducted at Site location of proposed temporary pre-fabricated facility T-2728 on Tuesday, 13 March 2018 at 09:00 a.m. Mountain Daylight Time for the purpose of answering questions regarding this solicitation in accordance with Air Force Federal Acquisition Regulation Supplement (AFFARS) 5352.215-9001

Interested vendors were requested to submit questions to the point of contact noted above not later than Friday, 16 March 2018 by 04:30 p.m. Mountain Daylight Time.

Information provided at this conference do not qualify the terms and conditions of the solicitation and specifications. Terms of the solicitation and specifications remain unchanged unless the solicitation is amended in writing.

SEE LINE ITEM SCHEDULE

SEE FUNDS SCHEDULE

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this Amendment is to:

1. Revise the List of Documents, Exhibits or Attachments as follows:

a) Attachment 1, Statement of Work Para. 2. updated to reflect supersession of

Attachment 1A – Workspace Specifications over Attachment 1D telecommunications installation criteria

FROM:

Attachment 1D – Telecommunications Installation Criteria for Facility Design and Renovation

TO:

Attachment 1D – Telecommunications Installation Criteria for Facility Design and Renovation, where not superseded by Attachment 1A – Workspace Specifications

b) Attachment 1A, Workspace Specifications for Temporary Facility is updated to reflect accurate requirements:

Cells A-E14 are updated to require “Computer network drop, consisting of 2 strand single mode fiber optic cable mounted in a single port face plate with SC connectors and in a separate junction box two blue CAT6 cables and jacks mounted in a dual port face plate”

Cells A-E56 are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E64 are inserted to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E70 are renumbered as Cells A-E71 and are updated to require “2 strand single mode fiber optic cable installed in a single port face plate with SC connectors and a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate, at conference room table”

Cells A-E72 are renumbered as Cells A-E73 and are deleted in their entirety

Cells A-E78 are renumbered as Cells A-E79 and are updated to require “2 strand single mode fiber optic cable installed in a single port face plate with SC connectors and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate, at conference room table”

Cells A-E80 are renumbered as Cells A-E81 and are deleted in their entirety

Cells A-E97 are renumbered as Cells A-E98 and are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E104 are renumbered as Cells A-E105 and are updated to require “Sufficient electrical”

Cells A-E105 are renumbered as Cells A-E106 and are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E106 are renumbered as Cells A-E107 and are updated to require “Intrusion Detection System (IDS) Panel (throughout area #2 - tied back to communication room (CER)”

Cells A-E108 are renumbered as Cells A-E109 and are updated to require

“Vindicator Access Control on area #2 main entry door - tied back to Communication Room (CER)”

Cells A-E124 are inserted to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E129 are renumbered as Cells A-E131 and are updated to require “Sufficient electrical”

Cells A-E132 are inserted to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E130 are renumbered as Cells A-E133 and are updated to require “Intrusion Detection System (IDS) Panel (throughout area #3) - tied back to communication room (CER)”

Cells A-E147 are renumbered as Cells A-E150 and are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E154 are renumbered as Cells A-E157 and are updated to require “Sufficient electrical”

Cells A-E158 are inserted to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E155 are renumbered as Cells A-E159 and are updated to require “Intrusion Detection System (IDS) Panel (throughout area #3) - tied back to communication room (CER)”

Cells A-E163 are renumbered as Cells A-E167 and are updated to require “Intrusion Detection System (IDS) Panel (inside room); can be tied with computer lab - all tied back to the Comm Rm (CER)”

Cells A-E180 are renumbered as Cells A-E184 and are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per location”

Cells A-E185 are renumbered as Cells A-E189 and are updated to require “6 strand single mode fiber optic cable installed in a single 3 port face plate with SC connectors per location and in a separate junction box two blue CAT 6 cables and jacks mounted in a two port face plate per locations”

Cells A-E193 are renumbered as Cells A-E197 and are updated to require “Main Communications Room (CER): ICD/ICS 705; centrally located to provide direct network access to each workspace (no pass-throughs) Reference Tab K - 75 ABW/SC, Telecommunications Installation Criteria for Facility Design and Renovation”

Cells A-E194 are renumbered as Cells A-E198 and are updated to require “Room shall be sized to accommodate 3 equipment racks installed side by side and shall be placed to provide front and rear access with a minimum of 36" clearance front and back”

Cells A-E199 are inserted to require “Racks shall be 19" X 7' two post racks, racks shall have 6" vertical cable managers located on the left and right sides, front and back, and seismically braced”

Cells A-E200 are inserted to require “Racks shall be grounded; shall have one (1) quad-plex 120 VAC, 60Hz, 1 phase electrical outlets and two (2) 208 VAC, 60Hz, 1 phase electrical outlets per rack and installed on the back side bottom of each rack”

Cells A-E201 are inserted to require “Provide, install, terminate, test and label 12 strand single mode fiber optic cable in a rack mounted fiber patch panel with SC connectors from the CER to a rack mounted fiber patch panel in each TR”

Cells A-E202 are inserted to require “Provide, install, terminate, test and label a 25 pair house cable on a 24 port rack mounted CAT 6 patch panel from the CER to a 24 port rack mounted CAT 6 patch panel in each TR”

Cells A-E195 are renumbered as Cells A-E203 and are updated to require “The Government shall provide and install required switches”

Cells A-E196 are renumbered as Cells A-E204 and are updated to require “The Government shall provide and install required TACLANES”

Requirements are deleted from cell G203

Requirements are deleted from cell G204

Cells A-E220 are inserted to require “Exterior Communications Cabling”

Cells A-E221 are inserted to require “Provide, install, terminate, test and label 24 strand single mode fiber optic cable in a rack mounted fiber patch panel with SC connectors from MH 19011-30 to CER”

Cells A-E222 are inserted to require “Provide, install, terminate, test and label 50 pair cable in a backboard mounted BET from MH 19011-30 to CER. From BET provide, install, terminate, test and label a 50 pair house cable in a CAT 6 rack mounted patch panel”

Cells A-E223 are inserted to require “Provide and install 2, 4" conduit from MH 19011-30 to CER. Within one of the 4" conduits install 4, 1" inner-ducts”

Cells A-E224 are inserted to require “Provide, install, terminate, test and label a 300 pair cable in Bldg 1214”

Cells A-E225 are inserted to require “Provide, Install, terminate, test and label 288 strand single mode fiber from MH 19011-30 through MH19011-29, MH19011-28 to Bldg 1214. Unspliced cable shall be tested using OTDR”

Cells A-E226 are inserted to require “Splice 24 strand single mode fiber in MH 19011-30 to 288 strand fiber”

Cells A-E227 are inserted to require “Splice 50 pair cable in MH 19011-30 to 300 pair cable”

c) Attachment 3, FAR Clause 52.212-1 Addendum:

3.2 Subfactor 1 – Design Proposal is updated to reflect design proposal requirements:

3.2 Subfactor 1 – Design Proposal

The Offeror shall provide a design proposal for the entire project, along with a design maturation plan, which demonstrates the Offeror’s ability to deliver a 100% design solution on or before 45 days after receipt of contract award. All submissions shall follow USACE A/E/C CAD Standard, Release

6.0. The contractor shall develop construction specifications to UFC requirements in UFGS format. Additionally, all designs shall be stamped and sealed by a registered professional engineer, architect, NCIDQ (Interiors), or other design discipline with formal credentials. The proposed design shall demonstrate the Offeror’s ability to identify, understand, and integrate the Government’s temporary facility requirements for layout, manufacturing, security, and safety standards in accordance with the following attachments:

a) Attachment 1A - Workspace Specification

b) Attachment 1B - Unified Facilities Criteria - Whole Building Design

Guide

c) Attachment 1C - Hill AFB - Base Facility Design Standards

d) Attachment 1E - Intelligence Community Directive / Intelligence

Community Standards (ICD/ICS) 705

3.2 Subfactor 1 – Design Proposal

The Offeror shall provide a design proposal for the entire project, along with a design maturation plan, which demonstrates the Offeror’s ability to deliver a 100% design solution on or before 45 days after receipt of contract award. All submissions shall follow USACE A/E/C CAD Standard, Release

6.0. The contractor shall develop construction specifications to UFC requirements in UFGS format. Additionally, all designs shall be stamped and sealed by a registered professional engineer, architect, NCIDQ (Interiors), or other design discipline with formal credentials. The proposed design shall demonstrate the Offeror’s ability to identify, understand, and integrate the Government’s temporary facility requirements for layout, manufacturing, security, safety, and communication standards in accordance with the following attachments:

a) Attachment 1 - Statement of Work, Revision 02, paragraphs:

1.

3. through 3.1.5.7.

3.2. through 3.2.9.5.

3.2.10. through 3.2.18.5.

b) Attachment 1A - Workspace Specification

c) Attachment 1B - Unified Facilities Criteria – Whole Building Design

Guide

d) Attachment 1C - Hill AFB - Base Facility Design Standards

e) Attachment 1E - Intelligence Community Directive / Intelligence

f) Attachment 1N - Communications Requirements

d) Attachment 4, FAR Clause 52.212-2 Addendum:

Subfactor 1: Design Proposal is updated to reflect design proposal requirements:

Subfactor 1: Design Proposal Description: This subfactor evaluates the Offeror’s design proposal for the entire project, along with a design maturation plan, which demonstrates the Offeror’s ability to deliver a 100% design solution on or before 45 days after receipt of contract award. All submissions shall follow USACE A/E/C CAD Standard, Release 6.0. The contractor shall develop construction specifications to UFC requirements in UFGS format. Additionally, all designs shall be stamped and sealed by a registered professional engineer, architect, NCIDQ (Interiors), or other design discipline with formal credentials. The proposed design shall demonstrate the Offeror’s ability to identify, understand, and integrate the Government’s temporary facility requirements for layout, manufacturing, security, and safety standards in accordance with the following attachments:

a. Attachment 1A - Work space Specification

b. Attachment 1B - Unified Facilities Criteria – Whole Building Design

Guide

c. Attachment 1C - Hill AFB - Base Facility Design Standards

d. Attachment 1E - Intelligence Community Directive / Intelligence

Minimum Level of Acceptability: This subfactor is met when the offeror’s design proposal for the entire project, along with a design maturation plan, demonstrates the Offeror’s ability to deliver a 100% design solution on or before 45 days after receipt of contract award.

Subfactor 1: Design Proposal Description: This subfactor evaluates the Offeror’s design proposal for the entire project, along with a design maturation plan, which demonstrates the Offeror’s ability to deliver a 100% design solution on or before 45 days after receipt of contract award. All submissions shall follow USACE A/E/C CAD Standard, Release 6.0. The contractor shall develop construction specifications to UFC requirements in UFGS format. Additionally, all designs shall be stamped and sealed by a registered professional engineer, architect, NCIDQ (Interiors), or other design discipline with formal credentials. The proposed design shall demonstrate the Offeror’s ability to identify, understand, and integrate the Government’s temporary facility requirements for layout, manufacturing, security, safety, and communication standards in accordance with the following attachments:

a) Attachment 1 - Statement of Work, Revision 02, paragraphs:

1.

3. through 3.1.5.7.

3.2. through 3.2.9.5.

3.2.10. through 3.2.18.5.

b) Attachment 1A - Workspace Specification

c) Attachment 1B - Unified Facilities Criteria – Whole Building Design

Guide

d) Attachment 1C - Hill AFB - Base Facility Design Standards

e) Attachment 1E - Intelligence Community Directive / Intelligence

f) Attachment 1N - Communications Requirements

2. Extend the proposal due date:

FROM: 12 April 2018 at 2:00 p.m. Mountain Daylight Time.

TO: 17 April 2018 at 2:00 p.m. Mountain Daylight Time.

All other terms and conditions remain unchanged.

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No.

Firm Fixed Price

100% Design Solution of Temporary Facility

Required Delivery

Proposed

Quantity U/I Unit Price Amount

1 EA

C212

Facility Design

TEMPORARY FACILITY DESIGN

100 percent final design solution of Temporary Facility 2728 in accordance with Statement of Work section 3.2.2. dated 05 February 2018 and Contract Data Requirements List (CDRL) A001.

60 percent design solution due at time of offer.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance:

Type / Ship To Quantity (U/I) To be determined _ Req No / Pri

+ F2DCAH 1 EA TBD

+ F2DCAH 1 EA

Earthwork, Footings/Foundation, Paving, Utilities, etc.

1 LO

Y1NZ

SITE PREPARATION - ELECTRICAL, COMMUNICATION, WATER, SEWER, ETC.

Incidental construction and preparation for Temporary Facility 2728 site in accordance with Statement of Work section 3.2.15., 3.2.16., and 3.2.17. dated 05 February 2018 and Contract Data Requirements List (CDRL) A002.Federal Acquisition Regulation Clauses pertaining to this Item Number:52.211-12, 52.228-1, 52.228-2, 52.228-5, 52.228-11, and 52.228-15

Inspection: Destination

Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Commercial Item Inspection Trade Agreement Act

+ F2DCAH 1 LO TBD

+ F2DCAH 1 LO

Pre-Fabricated Temporary Units

EA

NSN: 5410

PRE-FABRICATED PORTABLE UNITS

Delivery of commercial pre-fabricated portable units in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 252.211-7003 Item Unique Identification and Valuation, commercial inspection practices, and Statement of Work sections 3.2.3. and 3.2.16. dated 05 February 2018.

Limitations of Liability: High Value Item

Inspection/Acceptance Report: Receiving Report Required Warranty Required

Quality Assurance: Commercial Item Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

+ F2DCAH DESTINATION

+ F2DCAH EA TBD

+ F2DCAH EA

Earthwork, Footings/Foundation, Paving, Utilities, etc.

Assembly of Pre-Fabricated Portable Units

Period of Performance

Y1PZ

ASSEMBLY OF PRE-FABRICATED PORTABLE UNITS, INSPECTION

Assembly of pre-fabricated portable units, final inspection and accreditation of Temporary Facility 2728 in accordance with Statement of Work section 3.2 dated 05 February 2018, Attachment L, and Intelligence Community Directive/Standards (ICD/ICS) 705, Hill Air Force Base Facility Design Standards, and Unified Facilities Criteria - Whole Building Design Guide.

Limitations of Liability: High Value Item

Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Commercial Item Inspection Trade Agreement Act Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Period of Performance

Option: Modular Furniture and Incidental Service

NSN: 7110

Option

MODULAR FURNITURE AND INCIDENTAL SERVICE

Air Force Furnishings Commodity Council (AFFCC) Systems and Modular Furniture products, Filing and Storage products, Office Seating products, Executive Office & Conference Room Furniture products, as well as the associated services in accordance with commercial inspection practices, standard inspection, Statement of Work section 3.1.4.8 dated 05 February 2018, Hill Air Force Base Facility Design Standards, Unified Facilities Criteria - Whole Design Guide, and approved 100% design as accepted under Contract Line Item Number (CLIN) 0001.

Inspection: Destination

Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

+ F2DCAH DESTINATION

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

DATA

DATA

Data in accordance with DD 1423-1

Data in accordance with DD 1423-1 attached hereto

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A

Option: Modular Furniture and Incidental Service

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + F2DCAH

Matthew Regan

AFNWC/NICL

6077 Indigo Lane Building 1530 Hill Air Force Base UT 84056-5816

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A F2D0BD

Matthew Regan

AFNWC/NICL

6077 Indigo Lane

Building 1530 Hill Air Force Base UT 84056-5816

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) (IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii))

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html http://www.aimglobal.org/?Reg_Authority15459

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

Pre-fabricated portable units Commercial pre-fabricated portable units

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

Not applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number not applicable.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number

( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology—International symbology specification—Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that— http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Indentifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology–Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number);and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S.

Military Property, latest version.

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i) , (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

FA8219-18-R-7010-0004

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(The above Clause/Provision has been modified.)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (NOV 2017)

(IAW FAR 12.301(b)(4))

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19,Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (Aug 1996)(31 U.S.C 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with

Alternate I (Oct 1995)(41 U.S.C. 4704 and 10 U.S.C. 2402).

X (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(3) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/%3B

Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct

2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(5) [Reserved]

(6)

(7)

52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters

(Jul 2013) (41 U.S.C. 2313).

(10) [Reserved}

(11)

(12)

(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011)(15 U.S.C.

657a).

(ii) Alternate I (Nov 2011) of 52.219-3.

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns

(Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

(12) (ii) Alternate I (Jan 2011) of 52.219-4.

(13) [Reserved]

X (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644).

(14) (ii) Alternate I (Nov 2011).

(14) (iii) Alternate II (Nov 2011).

(15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003)(15 U.S.C. 644).

(15) (ii) Alternate I (Oct 1995) of 52.219-7.

(15) (iii) Alternate II (Mar 2004) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and

(17)

(3)).

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). (In accordance with DPAP Memo dated 13 Dec 2017, DAR Tracking Number

2018-O0007, Class Deviation—Subcontract Reporting, this clause and any applicable alternates are replaced with DFARS Deviation(s) dated Dec 2017, listed below when applicable. Effective until incorporated into the FAR or

DFARS or until rescinded.)

(17) (ii) Alternate I (Nov 2016) of 52.219-9.

(17) (iii) Alternate II (Nov 2016) of 52.219-9.

(17) (iv) Alternate III (Nov 2016) of 52.219-9.

(17) (v) Alternate IV (Nov 2016) of 52.219-9.

(18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

X (19) 52.219-14, Limitations on Subcontracting (Jan 2017)(15 U.S.C. 637(a)(14)).

(20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

(21)

637(d)(4)(F)(i)).

52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside

(Nov 2011)(15 U.S.C. 657 f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

(23) 52.219-29, Notice of Set-Aside for, or Sole source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (1 U.S.C.

(24)

637(m)).

52.219-30, Notice of Set-Aside for, or Sole source Award to, Women-Owned Small

Business Concerns Eligible Under the Women-Owned Small Business Program

(Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

X (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) (E.O.

13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Sept 2016)(E.O. 11246). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number 2017-O0008, Class Deviation—Office of Federal

Contract Compliance Programs Waiver of Certain Clause Requirements in

Contracts for Hurricane Harvey Relief Efforts, this clause is replaced with

DFARS Deviation(s) dated Sept 2017, listed below when applicable. Effective until incorporated into the FAR or DFARS or until rescinded.)

X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

(In accordance with DPAP Memo dated 01 September 2017, DAR Tracking

Number 2017-O0008, Class Deviation—Office of Federal Contract Compliance

Programs Waiver of Certain Clause Requirements in Contracts for Hurricane

Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated

Sept 2017, listed below when applicable. Effective until incorporated into the

FAR or DFARS or until rescinded.)

X (30) 52.222-36, Equal Opportunity For Workers with Disabilities (Jul

2014)(29 U.S.C. 793). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number

2017-O0008, Class Deviation—Office of Federal Contract Compliance

Programs Waiver of Certain Clause Requirements in Contracts for Hurricane

Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated

Sept 2017, listed below when applicable. Effective until incorporated into the

FAR or DFARS or until rescinded.)

X (31) 52.222-37, Employment Reports on Veterans (Feb 2016)(38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor relations Act (Dec

2010) E.O. 13496).

X (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and

E.O. 13627).

(33)

(34)

(35)

(35)

(ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated

Items (May 2008)(42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

X (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (June 2016) (E.O. 13693).

(37)

(38)

(38)

(39)

52.223-12, Maintenance, Service, repair, or Disposal of Refrigeration Equipment and Air

Conditioners (June 2016) (E.O.13693).

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s

13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-13.

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and

13514).

(39)

(40)

(41)

(41)

(ii) Alternate I (Jun 2014) of 52.223-14.

52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42.U.S.C.

8259b).

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015)

(E.O.s 13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-16.

X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug

2011) (E.O.13513).

(43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693)

(44) 52.223-21, Foams (Jun 2016) (E.O. 13693).

X (45) (i) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(45) (ii) Alternate I, (Jan 2017) of 52.244-3.

X (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

(47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41

U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805

(47)

(47)

(47)

(48) note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

(ii) Alternate I (May 2014) of 52.225-3.

(iii) Alternate II (May 2014) of 52.225-3.

(iv) Alternate III (May 2014) of 52.225-3.

52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (49) 52.225-13, Restriction on Certain Foreign Purchases (Jun 2008)(E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the

Department of Treasury).

(50)

(51)

(52)

(53)

(54)

52.225-26, Contractors Performing Private Security Functions Outside the United States

(Oct 2016) (Section 862, as amended, of the National Defense Authorization

Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007)(42 U.S.C. 5150).

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007)(42 U.S.C. 5150).

52.232-29, Terms for financing of Purchases of Commercial Items (Feb 2002)(41 U.S.C.

4505, 10 U.S.C. 2307(f)).

52.232-30, Installment Payments for Commercial Items (Jan 2017)(41 U.S.C. 4505, 10

U.S.C. 2307(f)).

X (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul

2013)(31.U.S.C. 3332).

(56)

(57)

(58)

(59)

(60)

(60)

52.232-34, Payment by Electronic Funds Transfer—Other than System for Award

Management (Jul 2013)(31.U.S.C. 3332).

52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

52.242-5, Payment to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(12)).

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006)

(46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

(1) (2)

52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

FA8219-18-R-7010-0004

(3)

(4)

(5)

(6)

(7)

52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (May 2014)(29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards - Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (May 2014)(41 U.S.C. chapter 67).

X (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(9) (10)

52.222-62, Paid Sick Leave Under Executive Order 13706. (Jan 2017) (E.O. 13706).

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792).

52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1)…