12_FA821918R0010-0001.pdf

FA8219-18-R-0010-0001

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

Pre-Fabricated Temporary Facility T-2728

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

DEPARTMENT OF THE AIR FORCE

DIRECTORATE OF CONTRACTING

AFNWC PZBG

6008 WARDLEIGH ROAD

BLDG 1580, HILL AIR FORCE BASE UT 84056-5837

BUYER: Brogan L. Fullmer/AFNWC Brogan.Fullmer@US.AF.Mil Phone: (801) 586- 6521 No Collect Calls

DEPARTMENT OF THE AIR FORCE

DIRECTORATE OF CONTRACTING

AFNWC PZBG

6008 WARDLEIGH ROAD

BLDG 1580, HILL AIR FORCE BASE UT 84056-5837

CONTRACTING OFFICER: Jeremy M. Bodin/AFNWC Jeremy.Bodin@US.AF.Mil Phone: (801) 777-1264 No Collect Calls

REQUISITION NUMBER: F2DCAH7241B103

SOLICITATION NUMBER: FA8219-18-R-0010

SOLICITATION ISSUE DATE: 28 February 2018 OFFER DUE DATE/LOCAL TIME: 29 March 2018 at 2:00 p.m. Mountain Standard Time

SOLICITATION AMENDMENT NUMBER: FA8219-18-R-0010-0001

SOLICITATION AMENDMENT ISSUE DATE: 14 March 2018 OFFER DUE DATE/LOCAL TIME: 29 March 2018 at 2:00 p.m. Mountain Standard Time

Solicitation incorporates by reference FAR 52.212-1, 52.212-4. FAR 52.212-3 and 52.212-

Addenda are attached

DO/DX: DO B1 0

SCD: A

ROUTINE

THIS IS A TOTAL SMALL BUSINESS SET-ASIDE.

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No awards will be made under this solicitation until funds are available. The Government reserves the right to cancel the solicitation prior to or after the closing date. The Government is under no obligation to reimburse Offeror(s) for any costs incurred in the event the Government cancels this solicitation.

Offeror(s) shall submit volumes in accordance with Federal Acquisition Regulation (FAR) 52.212-1 --Instructions to Offerors -- Commercial Items.

A pre-proposal conference was conducted at Site location of proposed temporary pre-fabricated facility T-2728 on Tuesday, 13 March 2018 at 09:00 a.m. Mountain Standard Time for the purpose of answering questions regarding this solicitation in accordance with Air Force Federal Acquisition Regulation Supplement (AFFARS) 5352.215-9001

Interested vendors are requested to submit questions to the point of contact noted above not later than Friday, 16 March 2018 by 04:30 p.m. Mountain Standard Time.

Information provided at this conference do not qualify the terms and conditions of the solicitation and specifications. Terms of the solicitation and specifications remain unchanged unless the solicitation is amended in writing.

SEE LINE ITEM SCHEDULE

SEE FUNDS SCHEDULE

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this Amendment is to:

1. Revise or add to the List of Documents, Exhibits or Attachments as follows:

a) Attachment 1, Statement of Work:

· Para 1. Updated to reflect a single story requirement

· Para 2. Add Attachment 1N – AFNWC Comm Req (SCOIW)

· Deleted 3.1.5.5.1. in its entirety.

· Deleted 3.2.17. in its entirety.

· Deleted 3.2.17.1. in its entirety.

· Deleted 3.2.20.2. in its entirety.

· Revised the table at 3.2.28:

From:

CDRL Title DID SOW Reference

A001 Conceptual Design Drawings/Models

DI-SESS-81001E 3.2.2

A002 Site Preparations Requirements and Installation Plan

DI-MGMT-80033A 3.2.18.1

A003 Accident/Incident Report DI-SAFT-81563 3.2.21.3

To:

CDRL Title DID SOW Reference

A028 Conceptual Design Drawings/Models

DI-SESS-81001E 3.2.2

A112 Site Preparations Requirements and Installation Plan

DI-MGMT-80033A 3.2.18.1

A071 Accident/Incident Report DI-SAFT-81563 3.2.21.3

b) Attachment 1A, Workspace Specifications for Temporary Facility double-door

Intelligence Community Directive (ICD)705/Intelligence Community Standard (ICS) 705-1 construction procedures are deleted from cell G10.

c) Attachment 1F, Air Force Furnishings Commodity Council Contract

Requirements is revised with current Utah vendor points of contact.

d) Attachment 1N, Communication Requirements, is incorporated.

e) Attachment 3, FAR Clause 52.212-1 Addendum, Paragraph 3.2 is updated to reflect UFC requirements, UFGS format, and design stamps. Paragraphs 3.3 and

3.4 are updated to reflect a single story requirement. Paragraph 5.3.3. is updated to further outline proposal guarantee (bid bond) requirements.

f) Attachment 4, FAR Clause 52.212-2 Addendum, Subfactor 1 is updated to reflect

UFC requirements, UFGS format, and design stamps. Subfactors 2 and 3 are updated to reflect a single story requirement

g) Attachment 8, CDRLs A001, A002, and A003 are renumbered A028, A112, and A071 respectively.

2. Delete FAR Provision 52.232-13 Notice of Progress Payments from the solicitation.

3. Add DFARS Clause 252.232-7007 Limitation of Government’s Obligation

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No.

Firm Fixed Price

100% Design Solution of Temporary Facility

Quantity U/I Unit Price Amount

1 EA

C212

Facility Design

TEMPORARY FACILITY DESIGN

100 percent final design solution of Temporary Facility 2728 in accordance with Statement of Work section 3.2.2. dated 05 February

2018 and Contract Data Requirements List (CDRL) A001.

60 percent design solution due at time of offer.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Required

Delivery

Inspection: Destination

Acceptance: Destination

Inspection/Acceptance Report: Receiving Report Required

Quality Assurance:

Type / Ship To Quantity (U/I) To be determined _ Req No / Pri

+ F2DCAH 1 EA TBD

Proposed

+ F2DCAH 1 EA

Earthwork, Footings/Foundation, Paving, Utilities, etc.

1 LO

Y1NZ

SITE PREPARATION - ELECTRICAL, COMMUNICATION, WATER, SEWER, ETC.

Incidental construction and preparation for Temporary Facility 2728 site in accordance with Statement of Work section 3.2.15., 3.2.16., and 3.2.17. dated 05 February 2018 and Contract Data Requirements List (CDRL) A002.Federal Acquisition Regulation

Clauses pertaining to this Item Number:52.211-12, 52.228-1, 52.228-2, 52.228-5, 52.228-11, and 52.228-15

Inspection: Destination

Acceptance: Destination

Inspection/Acceptance Report: Receiving Report Required

Warranty Required

Quality Assurance: Commercial Item Inspection

Trade Agreement Act

Earthwork, Footings/Foundation, Paving, Utilities, etc.

+ F2DCAH 1 LO TBD

+ F2DCAH 1 LO

Pre-Fabricated Temporary Units

EA

NSN: 5410

PRE-FABRICATED PORTABLE UNITS

Delivery of commercial pre-fabricated portable units in accordance with Defense Federal Acquisition Regulation Supplement

(DFARS) 252.211-7003 Item Unique Identification and Valuation, commercial inspection practices, and Statement of Work sections 3.2.3. and 3.2.16. dated 05 February 2018.

Limitations of Liability: High Value Item

Inspection/Acceptance Report: Receiving Report Required

Warranty Required

Quality Assurance: Commercial Item Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

+ F2DCAH DESTINATION

+ F2DCAH EA TBD

+ F2DCAH EA

Assembly of Pre-Fabricated Portable Units

Y1PZ

ASSEMBLY OF PRE-FABRICATED PORTABLE UNITS, INSPECTION

Assembly of pre-fabricated portable units, final inspection and accreditation of Temporary Facility 2728 in accordance with Statement of Work section 3.2 dated 05 February 2018, Attachment L, and Intelligence Community Directive/Standards (ICD/ICS)

705, Hill Air Force Base Facility Design Standards, and Unified Facilities Criteria - Whole Building Design Guide.

Limitations of Liability: High Value Item

Period of

Performance

Inspection: Destination

Acceptance: Destination

Inspection/Acceptance Report: Receiving Report Required

Warranty Required

Quality Assurance: Commercial Item Inspection

Trade Agreement Act

Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Period of

Performance

Option: Modular Furniture and Incidental Service

NSN: 7110

Option

MODULAR FURNITURE AND INCIDENTAL SERVICE

Air Force Furnishings Commodity Council (AFFCC) Systems and Modular Furniture products, Filing and Storage products, Office

Seating products, Executive Office & Conference Room Furniture products, as well as the associated services in accordance with commercial inspection practices, standard inspection, Statement of Work section 3.1.4.8 dated 05 February 2018, Hill Air Force

Base Facility Design Standards, Unified Facilities Criteria - Whole Design Guide, and approved 100% design as accepted under

Contract Line Item Number (CLIN) 0001.

Inspection/Acceptance Report: Receiving Report Required

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

+ F2DCAH DESTINATION

Assembly of Pre-Fabricated Portable Units

Not Separately Priced

Quantity U/I Unit Price

1 LO NSP

Data in accordance with DD 1423-1

DATA

DATA

Data in accordance with DD 1423-1 attached hereto

Inspection: Destination

Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Exhibit: A

Option: Modular Furniture and Incidental Service

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + F2DCAH

Matthew Regan

AFNWC/NICL

6077 Indigo Lane

Building 1530

Hill Air Force Base UT 84056-5816

MARK FOR: (See Individual Line Item)

REQUISITION NUMBER: (See Individual Line Item)

REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A F2D0BD

Matthew Regan

AFNWC/NICL

6077 Indigo Lane

Building 1530

Hill Air Force Base UT 84056-5816

MARK FOR: (See Individual Line Item)

REQUISITION NUMBER: (See Individual Line Item)

REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii))

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error checking and Correction 200 (ECC200) specification found within International

Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the

Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html http://www.aimglobal.org/?Reg_Authority15459

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

See Schedule as Applicable

Pre-fabricated portable units Commercial pre-fabricated portable units

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the

Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

Not applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in

Attachment Number not applicable.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology—International symbology specification—Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC

Application Identifiers and Fact Data Indentifiers and Maintenance and ANSI MH 10.8.2 Data

Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC

Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data

Identifier and Application Identifier Standard.

http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International

Standard 15434, Information Technology–Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification

Number);and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military

Property, latest version.

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i) , (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the

Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number , Unique Item Identifier

Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(The above Clause/Provision has been modified.)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (NOV 2017)

(IAW FAR 12.301(b)(4))

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19,Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015

(Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (Aug 1996)(31 U.S.C 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with

Alternate I (Oct 1995)(41 U.S.C. 4704 and 10 U.S.C. 2402).

X (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(3) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment

Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct

2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(5) [Reserved]

(6)

(7)

52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section

743 of Div. C).

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters

(Jul 2013) (41 U.S.C. 2313).

(10) [Reserved}

(11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011)(15 U.S.C.

http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/%3B

(11)

(12)

657a).

(ii) Alternate I (Nov 2011) of 52.219-3.

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

(12) (ii) Alternate I (Jan 2011) of 52.219-4.

(13) [Reserved]

X (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644).

(14) (ii) Alternate I (Nov 2011).

(14) (iii) Alternate II (Nov 2011).

(15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003)(15 U.S.C. 644).

(15) (ii) Alternate I (Oct 1995) of 52.219-7.

(15) (iii) Alternate II (Mar 2004) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and

(17)

(3)).

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). (In accordance with DPAP Memo dated 13 Dec 2017, DAR Tracking Number

2018-O0007, Class Deviation—Subcontract Reporting, this clause and any applicable alternates are replaced with DFARS Deviation(s) dated Dec 2017, listed below when applicable. Effective until incorporated into the FAR or

DFARS or until rescinded.)

(17) (ii) Alternate I (Nov 2016) of 52.219-9.

(17) (iii) Alternate II (Nov 2016) of 52.219-9.

(17) (iv) Alternate III (Nov 2016) of 52.219-9.

(17) (v) Alternate IV (Nov 2016) of 52.219-9.

(18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

X (19) 52.219-14, Limitations on Subcontracting (Jan 2017)(15 U.S.C. 637(a)(14)).

(20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

(21)

637(d)(4)(F)(i)).

52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside

(Nov 2011)(15 U.S.C. 657 f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

(23)

(24)

52.219-29, Notice of Set-Aside for, or Sole source Award to, Economically Disadvantaged

Women-Owned Small Business Concerns (Dec 2015) (1 U.S.C. 637(m)).

52.219-30, Notice of Set-Aside for, or Sole source Award to, Women-Owned Small

Business Concerns Eligible Under the Women-Owned Small Business Program

(Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

X (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Oct 2016) (E.O.

13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Sept 2016)(E.O. 11246). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number 2017-O0008, Class Deviation—Office of Federal

Contract Compliance Programs Waiver of Certain Clause Requirements in

Contracts for Hurricane Harvey Relief Efforts, this clause is replaced with

DFARS Deviation(s) dated Sept 2017, listed below when applicable. Effective until incorporated into the FAR or DFARS or until rescinded.)

X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

(In accordance with DPAP Memo dated 01 September 2017, DAR Tracking

Number 2017-O0008, Class Deviation—Office of Federal Contract Compliance

Programs Waiver of Certain Clause Requirements in Contracts for Hurricane

Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated

Sept 2017, listed below when applicable. Effective until incorporated into the

FAR or DFARS or until rescinded.)

X (30) 52.222-36, Equal Opportunity For Workers with Disabilities (Jul

2014)(29 U.S.C. 793). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number

2017-O0008, Class Deviation—Office of Federal Contract Compliance

Programs Waiver of Certain Clause Requirements in Contracts for Hurricane

Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated

Sept 2017, listed below when applicable. Effective until incorporated into the

FAR or DFARS or until rescinded.)

X (31) 52.222-37, Employment Reports on Veterans (Feb 2016)(38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor relations Act (Dec

2010) E.O. 13496).

X (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and

E.O. 13627).

(33)

(34)

(35)

(35)

(ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated

Items (May 2008)(42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

X (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (June 2016) (E.O. 13693).

(37)

(38)

(38)

(39)

(39)

(40)

(41)

(41)

52.223-12, Maintenance, Service, repair, or Disposal of Refrigeration Equipment and Air

Conditioners (June 2016) (E.O.13693).

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s

13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-13.

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun 2014) of 52.223-14.

52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42.U.S.C.

8259b).

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct

2015) (E.O.s 13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-16.

X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug

2011) (E.O.13513).

(43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693)

(44) 52.223-21, Foams (Jun 2016) (E.O. 13693).

X (45) (i) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(45) (ii) Alternate I, (Jan 2017) of 52.244-3.

X (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

(47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41

U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805

(47)

(47)

(47)

(48) note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

(ii) Alternate I (May 2014) of 52.225-3.

(iii) Alternate II (May 2014) of 52.225-3.

(iv) Alternate III (May 2014) of 52.225-3.

52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (49) 52.225-13, Restriction on Certain Foreign Purchases (Jun 2008)(E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department

(50)

(51)

(52)

(53)

(54) of Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States

(Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007)(42 U.S.C. 5150).

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007)(42 U.S.C. 5150).

52.232-29, Terms for financing of Purchases of Commercial Items (Feb 2002)(41 U.S.C.

4505, 10 U.S.C. 2307(f)).

52.232-30, Installment Payments for Commercial Items (Jan 2017)(41 U.S.C. 4505, 10

U.S.C. 2307(f)).

X (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul

2013)(31.U.S.C. 3332).

(56)

(57)

(58)

(59)

(60)

(60)

52.232-34, Payment by Electronic Funds Transfer—Other than System for Award

Management (Jul 2013)(31.U.S.C. 3332).

52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

52.242-5, Payment to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(12)).

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006)

(46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting

Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

(1)

(2)

(3)

(4)

(5)

(6)

(7)

52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and

41 U.S.C. chapter 67).

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price

Adjustment (Multiple Year and Option Contracts) (May 2014)(29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards - Price

Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain

Equipment—Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to

Contracts for Certain Services—Requirements (May 2014)(41 U.S.C. chapter

67).

X (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(9)

(10)

(11)

52.222-62, Paid Sick Leave Under Executive Order 13706. (Jan 2017) (E.O. 13706).

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792).

52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract.

If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (e)(1) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

(Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing

Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow Down required in accordance with paragraph (l) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number 2017-O0008, Class Deviation—Office of Federal

Contract Compliance Programs Waiver of Certain Clause Requirements in Contracts for Hurricane

Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated Sept 2017, listed below when applicable. Effective until incorporated into the FAR or DFARS or until rescinded.)

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (In accordance with

DPAP Memo dated 01 September 2017, DAR Tracking Number 2017-O0008, Class Deviation—

Office of Federal Contract Compliance Programs Waiver of Certain Clause Requirements in

Contracts for Hurricane Harvey Relief Efforts, this clause is replaced with DFARS Deviation(s) dated Sept 2017, listed below when applicable. Effective until incorporated into the FAR or

DFARS or until rescinded.)

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (In accordance with DPAP Memo dated 01 September 2017, DAR Tracking Number 2017-O0008, Class Deviation—Office of Federal Contract Compliance Programs Waiver of Certain Clause

Requirements in Contracts for Hurricane Harvey Relief Efforts, this clause is replaced with DFARS

Deviation(s) dated Sept 2017, listed below when applicable. Effective until incorporated into the

FAR or DFARS or until rescinded.)

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010)

(E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(xii) X (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and

E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (May 2014) (41

U.S.C. chapter 67).

(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (May 2014) (41 U.S.C. chapter 67).

(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xvii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct

2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10

U.S.C. 2302 Note).

(xviii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraphs (e) of FAR clause 52.226-6.

(xix) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46

U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of

FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi))

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (DEC 2017)

(IAW DFARS 225.7002-3(a), DFARS 212.301(f)(xxvii))

252.225-7021 TRADE AGREEMENTS--BASIC (DEC 2017)

(IAW DFARS 225.1101(6))

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)

(IAW DFARS 226.104)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

(IAW DFARS 232.7004)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal

Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using

WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer

Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the

Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to

WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting

Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing

System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2012)

(IAW DFARS 243.205-71)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

(IAW DFARS 244.403)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013)

(IAW DFARS 246.371(a), DFARS 212.301(f)(xii))

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC (APR 2014)

(IAW DFARS 247.574(b))

ADDENDUM TO CLAUSE 52.212-4

5352.201-9101 OMBUDSMAN (JUN 2016)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Jeffrey L. Sorensen at 505 846 -1924 , FAX 505 846 -0122 , email jeffrey.sorensen.5@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571)

256-2431.

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

(IAW FAR 4.1303)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016)

(IAW FAR 4.1804(c), FAR 12.301(d))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (OCT 2016)

(IAW DFARS 204.7304(c))

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2010)

(IAW AFFARS 5309.507-2, Policy Memo 10-C-15)

52.211-12 LIQUIDATED DAMAGES--CONSTRUCTION (SEP 2000)

(IAW FAR 11.503(b), DFARS 211.503(b))

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of $130.00 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (JAN 2017)

(IAW FAR 12.301(b)(3))

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this mailto:jeffrey.sorensen.5@us.af.mil contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The

Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its postacceptance rights--

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive…