Sample_Task_2_-_Evaluation_Factor_IPB_-_Technical_Subfactor_3.pdf

SAMPLE TASK 2

DIRECTIONS:

1) Convert ‘Sample Task 2a and 2b” into an illustrated parts breakdown (IPB) in SGML format per MIL-PRF-38807C to include front matter data (Cover, Table of Contents, etc.). Add the following Distribution Statement for the front cover.

DISTRIBUTION STATEMENT E - Distribution authorized to DoD Components only for unclassified and classified technical data Direct Military Support - The document contains export-controlled technical data of such military significance that release for purposes other than direct support of DoD approved activities may jeopardize an important operational military advantage of the United States.

Designation of such data is made by competent authority in accordance with DoD

Directive 5230.25 (20 October 2010). Other requests for this document shall be referred to OO-ALC/GHAEH, 6067 BOX ELDER LANE, Hill AFB, UT 84056-

5811.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export

Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq.

Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25.

Handling and Destruction Notice - Unclassified/Limited Distribution documents shall be handled using the same standard as "For Official Use Only (FOUO)" material, and will be destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

2) Convert all existing graphics found within attachments 2 to Vectorized CGM graphic files.

3) Demonstrate Index Portable Document Format (IPDF) with built-in links IAW the TOCR called out in PWS paragraph 3.10.4

4) Produce three final documents: eTO and IPDF format and SGML source data file.