DRAFT CBA List.pdf
PDF 128 KB Posted
- Attached to
- Primary Training Ranges
- Solicitation number
- FA4890-11-R-0012
About this file
Draft list of CBA Wage Determiniations - NOTE Still showing a separate WD for both Poinsett Range and Bulldog MOA current plan is to use only one WD for the single CBA covering both sites.
View the file
Other files
Show all 45
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 1 of 10
DRAFT
ATTACHMENT X
DATED X MONTH 11
COLLECTIVE BARGAINING AGREEMENT
WAGE DETERMINATIONS
CONTRACT FA4980-12-C-00XX
Solicitation FA4890-11-R-0012
Number Date Area Site Page
TABLE OF CONTENTS 1
CBA-2011-4328 Rev 0 28 Jun 11 Lowndes, GA Grand Bay B&G 2
CBA-2008-1981 Rev 2 8 Aug 11 Richmond, GA Bulldog MOA 3
CBA-2008-1980 Rev 2 8 Aug 11 Sumter, SC Poinsett ECR 4
CBA-2005-3129 Rev 3 8 Aug 11 Scurry, TX Snyder Range 5
CBA-2005-3122 Rev 7 8 Aug 11 Dare, NC Dare County Range 6
CBA-2010-3614 Rev 1 8 Aug 11 Crook, WY Belle Fourche ESS 7
CBA-2005-3124 Rev 6 8 Aug 11 Otero, NM Holloman Ranges 8
CBA-2005-3121 Rev 4 8 Aug 11 Highlands, FL Avon Park Range 9
CBA-2008-1982 Rev 2 8 Aug 11 Tooele, UT Granite Peak ESS 10
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 2 of 10
REGISTER OF WAGE DETERMINATION UNDER | U.S. DEPARTMENT OF LABOR
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2011-4328
Diane Koplewski Division of | Revision No.: 0
Director Wage Determinations| Date Of Last Revision: 6/28/2011
State: Georgia
Area: Lowndes
Employed on 23 CONS contract for Air Traffic Control, Computer Operator, Heavy Equipment
Mechanic, & Electronic Technician.
Collective Bargaining Agreement between contractor: Ahntech Inc., and union: International
Association of Machinists and Aerospace Workers, AFL-CIO and its Local Lodge 2699, effective
1/27/2010 through 1/26/2012.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s).
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 3 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2008-1981
Diane Koplewski Division of | Revision No.: 2
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: Georgia
Area: Richmond
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training
Ranges (Bulldog MOA, Ft Gordon, GA, and Poinsett ECR by joint CBA).
Collective Bargaining Agreement between contractor: Ahntec, INC, and union: International Association of
Machinists and Aerospace Workers Local 713 of District 131, effective 7/15/2010 through 7/14/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 4 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2008-1980
Diane Koplewski Division of | Revision No.: 2
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: South Carolina
Area: Sumter
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training Ranges
(Poinsett ECR and Bulldog MOA, Ft Gordon, GA by joint CBA).
Collective Bargaining Agreement between contractor: Ahntech, INC., and union: International Association of
Machinists and Aerospace Workers Local 1859 of District 110, effective 7/15/2010 through 7/14/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s).
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 5 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2005-3129
Diane Koplewski Division of | Revision No.: 3
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: Texas
Area: Scurry
Employed on ACC AMIC contract for Operations, Maintenance, and Support of the ACC Training Range
(Snyder Range, TX).
Collective Bargaining Agreement between contractor: AHNTECH INC, and union: International
Association of Machinists & Aerospace Workers Local 776, effective 5/26/2010 through 5/25/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 6 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2005-3122
Diane Koplewski Division of | Revision No.: 7
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: North Carolina
Area: Dare
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training
Ranges (Dare County Range, NC).
Collective Bargaining Agreement between contractor: AHNTECH INC, and union: International
Association of Machinists & Aerospace Workers Local 1859, effective 4/6/2011 through 4/5/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 7 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2010-3614
Diane Koplewski Division of | Revision No.: 1
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: Wyoming
Area: Crook
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training Ranges
(Belle Fourche ESS in Colony, WY).
Collective Bargaining Agreement between contractor: AHNTECH, INC, and union: International Association of
Machinists and Aerospace Workers Local 2525, effective 2/24/2011 through 6/21/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s).
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 8 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2005-3124
Diane Koplewski Division of | Revision No.: 6
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: New Mexico
Area: Otero
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training Ranges
(Holloman Range, NM).
Collective Bargaining Agreement between contractor: AHNTECH INC, and union: International Association of
Machinists & Aerospace Workers Local 2515, effective 8/18/2010 through 7/22/2012.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s).
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 9 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2005-3121
Diane Koplewski Division of | Revision No.: 4
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: Florida
Area: Highlands
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary Training Ranges
(Avon Park Range, FL).
Collective Bargaining Agreement between contractor: AHNTECH INC, and union: International Association of
Machinists & Aerospace Workers Local 2915, effective 8/10/2010 through 8/9/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s)
DRAFT Attachment X – X Mon 12 FA4890-11-R-0012 Page 10 of 10
THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary | WAGE AND HOUR DIVISION of Labor | WASHINGTON D.C. 20210
| Wage Determination No.: CBA-2008-1982
Diane Koplewski Division of | Revision No.: 2
Director Wage Determinations| Date Of Last Revision: 8/8/2011
State: Utah
Area: Tooele
Employed on ACC AMIC contract for Operations, Maintenance, and Support of ACC Primary
Training Ranges (Granite Peak ESS, Dugway Proving Grounds).
Collective Bargaining Agreement between contractor: Ahntech, INC, and union: International
Association of Machinists and Aerospace Workers Local 568, effective 5/13/2010 through
5/12/2013.
In accordance with Section 2(a) and 4(c) of the Service Contract Act, as amended, employees employed by the contractor(s) in performing services covered by the Collective Bargaining
Agreement(s) are to be paid wage rates and fringe benefits set forth in the current collective bargaining agreement and modified extension agreement(s).
GRANITE PEAK REMOVED FROM RECOMPETE
File details come from the government source that posted it. Updated .