Atch_9_Draft_DD_Form_254.pdf

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

DATE (YYYYMMDD)

DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE. Adobe Professional X

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

Tyndall AFN, FL 32403 501 Airey Ave STE 5 Tyndall AFB, FL 32403 guidance: Ref 10j: For Official Use Only (FOUO) information provided under this contract shall be managed and safeguarded IWA DoD 5400.7-R, Chapter 4, DoD Freedom of Information Act (FOIA).

Ref 10K: Restricted Area Badges: Local base procedures for entry to Air Force controlled/restricted areas where a contractor will work will be enforced. An AF Form 2586, Unescorted Entry Authorization Certificate, will be completed and signed by the sponsoring agencies Security Manger before a Restricted Areas Badge will be issued. Contractor employees must have a favorable completed National Agency Check with Written Inquires (NACI) investigation before receiving a Restricted Area Badge.

Ref 11e: Contract is for civil engineering support services at Tyndall AFB, Florida. Services include maintenance, repair and operations of real property and real property installed equipment.

Ref 14 (cont.) DoDM 5200.01, Information Security Program; AFI 16-1404, Air Force Information Security Program; AFI 16-1406 Air Force Industrial Security Program and other directives deemed necessary by the servicing IPO. Prior approval of the contracting activity is required for subcontracting.

This DD Form 254 is for the purpose of contractor performance of Base Operations Support Services. Actual knowledge of generation or production of classified material is not required in the performance of this contract. Cleared personnel are required to perform this service due to access to limited areas cannot be precluded by escorting personnel.

Unit Security Manager Date 325 FP/IP - ISPM Date

Annual Security Program Reviews for collateral information will be conducted by the 325 FW/IP Office.