Attch 3 CDRL A012 Security Mgmt Plan Draftv2.pdf
PDF 54 KB Posted
- Solicitation number
- FA461027R0001
About this file
This document is a placeholder message from Adobe Reader indicating that the PDF file failed to render properly. The page contains only technical troubleshooting instructions directing users to upgrade Adobe Reader software or seek additional assistance through Adobe's support resources. No contract opportunity information, solicitation details, requirements, or procurement-related content is present in this file. The document appears to be corrupted or improperly formatted and does not contain substantive contract documentation.
View the file
Other files
Show 40 more
Latest 50 of 124 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
PREVIOUS EDITION MAY BE USED.
DD FORM 1423, FEB 2024
Page of (Updated 20250617)
INSTRUCTIONS FOR COMPLETING DD FORM 1423
(See DoDM 5010.12 for detailed instructions.)
DD FORM 1423, FEB 2024
Page of (Updated 20250617)
CONTRACT DATA REQUIREMENTS LIST
C. CATEGORY:
14. DISTRIBUTION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES Draft Final Reg Repro
16. REMARKS
14. DISTRIBUTION
15.TOTAL
Image of arrow pointing towards totals
FOR GOVERNMENT PERSONNEL
Item A. Self-explanatory.
Item B. Self-explanatory.
Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.
Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).
Item E. Self-explanatory (to be filled in after contract award).
Item F. Self-explanatory (to be filled in after contract award).
Item G. Name of preparer of CDRL.
Item H. Date CDRL was prepared and signature of preparer of CDRL.
Item I. Name of CDRL approval authority.
Item J. Date CDRL was approved and signature of CDRL approval authority.
Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.
Item 2. Enter title as it appears on data acquisition document cited in Item 4.
Item 3. Enter subtitle of data item for further definition of data item (optional entry).
Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.
Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).
Item 6. Enter technical office responsible for ensuring adequacy of the data item.
Item 7. Specify requirement for inspection/acceptance of the data item by the Government.
Item 8. Specify requirement for approval of a draft before preparation of the final data item.
Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).
Item 10. Specify number of times data items are to be delivered.
Item 11. Specify as-of date of data item, when applicable.
Item 12. Specify when first submittal is required.
Item 13. Specify when subsequent submittals are required, when applicable.
Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.
Item 15. Enter total number of draft/final copies to be delivered.
Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.
Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.
Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.
FOR THE CONTRACTOR
Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.
a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.
Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.
b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.
Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.
c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.
Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.
d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.
Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.
Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.
These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.
9.0.0.2.20120627.2.874785 DD Form 1423, "Contract Data Requirements List" Hide Attachment Bar
| CurrentPage: |
| PageCount: |
| Select Classification from drop-down list.: 1 |
| CUI Indicator Information: |
| Click on this button to attach a file(s).: |
| A. CONTRACT LINE ITEM NUMBER: |
| exhibit: |
| C. CATEGORY: Select for "TDP.": 0 |
| C. CATEGORY: Select for "TM.": 0 |
| C. CATEGORY: Select for "OTHER.": 0 |
| C. CATEGORY: Enter specification for "Other.": MGMT |
| System: Facility Readiness and Maintenance Execution |
| ContractNum: |
| Contractor: |
| 1. DATA ITEM NUMBER: A012 |
| titleDataItem: Security Management Plan |
| subtitle: Security Management Plan |
| 4. AUTHORITY (Data Acquisition Document Number): |
| contractRef: PWS 2.8.6; 7.8.15 |
| reqOffice: SLD 30/SFS |
| 7. DD 250 REQUIREMENT: LT |
| 8. APPROVAL CODE : A |
| 9. DISTRIBUTION STATEMENT REQUIRED: D |
| freq: ASREQ |
| asOfDate: N/A |
| dateFirstSub: See Blk 16 |
| dateSubseqSub: Annually |
| 16. REMARKS: This CDRL contains Management Data. |
Block 4: Contractor format compatible with USG information system acceptable.
The scope includes all operational locations at SLD 30 and compliance with DAFMAN 31-101v3 (Integrated Defense), DAFMAN 31-101v3 (Integrated Defense Operations), SLD 30 Plan 31-101 (Base Defense Plan), DoDI O-2000.16 (Volumes 1–2), DAFI 31-145, AFI 31-101, DFARS 204.7202, DFARS 252.204-7004, and SLD 30 AT Plan 31-145. The contractor shall ensure the Security Management Plan (SMP) specifies the contractor's plan for the management and implementation of installation security that includes day-to-day security operations, Force Protection Conditions (FPCONs), threats and the various contingencies to ensure security of protection level resources and safeguarding of government property/personnel.
The contractor shall ensure the SMP includes at a minimum:
a. Methodology of SMP
b. Background investigation/clearances
c. OPSEC implementation and OPSEC Awareness Training
d. Antiterrorism implementation to include but not limited to; Barrier Plan, Bomb Threat Procedure, Active Shooter Procedure, Shelter in Place (SIP) Procedure, Contamination Procedure, Evacuation Procedure, along with AT Level I Awareness Training
e. FPCON Awareness & Compliance
f. A training and proficiency program for maintaining security member's qualifications and certifications along with plan to make them available to the government when requested.
g. Integration of security requirements for resource protection and physical security incorporating Integrated Defense Plan requirements
h. Command, control, and communication procedures for security
i. Incident Reporting & Compliance Exercises
j. Key Control
Block 8: USG review and approval by SLD 30/SFS is required for Draft and Final.
-Contractor shall allow a minimum of 10 business days for Government review. If Government comments are not received within this time frame, the Contractor shall request disposition guidance from the Contracting Officer's Representative (COR). The Contractor shall incorporate all Government comments and resubmit the revised Security Management Plan (SMP) within 10 calendar days after receipt of Government comments.
Blocks 12:
Draft is due 90 calendar days of Contract award.
Block 14: All submissions in electronic format ONLY shall be delivered to the SLD 30/PM via e-mail to: xxxxxx@us.af.mil and appropriate stakeholders.
| Click to add continuation field for Remarks: |
| 14. DISTRIBUTION - a. ADDRESSEE, new line: See Block 16 |
| 14. DISTRIBUTION - a. ADDRESSEE, new line: SLD 30/SFS |
| 14. DISTRIBUTION - a. ADDRESSEE, new line: SLD 30/PM |
| 15.TOTAL - Total draft copies is automatically calculated.: 1 |
| 15.TOTAL - Total draft copies is automatically calculated.: 1 |
| 15.TOTAL - Total final regular copies is automatically calculated.: 1 |
| 15.TOTAL - Total final regular copies is automatically calculated.: 1 |
| 15.TOTAL - Total final reproducible copies is automatically calculated.: 1 |
| 15.TOTAL - Total final reproducible copies is automatically calculated.: 1 |
| priceGrp: |
| estTotalPrice: |
| remarks: |
| preparedBy: |
| J. SIGNATURE: H. SIGNATURE |
| J. SIGNATURE: J. SIGNATURE |
| J. SIGNATURE: |
| approvedBy: |
| Click to add additional data items.: |
| Click to delete additional data items.: |
File details come from the government source that posted it. Updated .