Drawing Vol 2-2 Technology 614-700-TJ-20231011.pdf

TECHNOLOGY SYMBOL LIST

SYMBOL: DESCRIPTION: NOTE:

EQUIPMENT

LIST ABBREV.:

TECHNOLOGY ABBREVIATION KEY

ENTRANCE FACILITYEF-#

MAIN CROSS-CONNECTMC-#

TELECOMMUNICATIONS ROOMTR-#

ABOVE FINISHED FLOORAFF

BELOW FINISHED CEILINGBFC

CONDUITC

SIMILARSIM

TYPICALTYP

MOUNTING HEIGHT ABOVE FINISHED FLOOR+#

JUNCTION BOXJ-BOX

ABBR: DESCRIPTION:

UNLESS OTHERWISE NOTEDUON

FIELD OF VIEWFOV

DOUBLE POLE DOUBLE THROWDPDT

PAN TILT ZOOMPTZ

POWER OVER ETHERNETPOE

ABOVE FINISHED GRADEAFG

DELAYED EGRESSDE

TECHNOLOGY GENERAL NOTES:

1. ##-###-# INDICATES TECHNOLOGY EQUIPMENT SCHEDULE ITEM LABELED AS "EQUIPMENT

LIST ABBREVIATION"

2. REFER TO TECHNOLOGY EQUIPMENT SCHEDULE AND SPECIFICATIONS FOR FULL

DESCRIPTIONS AND MANUFACTURERS OF ALL DEVICES.

TECHNOLOGY MOUNTING SUBSCRIPT KEY:

A MOUNT AT +6" TO CENTERLINE ABOVE COUNTER OR BACKSPLASH

H MOUNT ORIENTED HORIZONTALLY

L MOUNT IN CASEWORK

M MOUNT IN MODULAR FURNITURE

S MOUNT IN SURFACE RACEWAY

A SLASH IS USED BETWEEN TWO SUBSCRIPTS, E.G., A/H.

1. THE COMPLETE INSTALLATION SHALL BE IN ACCORDANCE WITH THE ADA STANDARDS FOR

ACCESSIBLE DESIGN. REFER TO THE ADA GUIDELINES FOR ALL CONFIGURATION DETAILS

ON THIS PAGE FOR ADDITIONAL INFORMATION.

2. CONCEAL ALL CONDUIT IN WALLS, PARTITIONS, ABOVE CEILING, IN FLOOR SLAB, ETC.

UNLESS OTHERWISE INDICATED ON THE PLANS OR IN THE SPECIFICATIONS. CONDUIT IN

MECHANICAL ROOMS AND STORAGE ROOMS WITHOUT CEILINGS MAY BE EXPOSED ON

BUILDING STRUCTURE.

3. BOXES LOCATED ON OPPOSITE SIDES OF NON-RATED WALLS SHALL BE OFFSET A MINIMUM

OF 6" HORIZONTALLY. BOXES ON OPPOSITE SIDES OF FIRE RATED WALLS SHALL BE

OFFSET A MINIMUM OF 24" HORIZONTALLY. "THRU-THE-WALL" BOXES SHALL NOT BE

ALLOWED WITHOUT PRIOR WRITTEN APPROVAL OF THE ARCHITECT/ENGINEER.

4. VERIFY ALL FURNITURE, MODULAR FURNITURE, AND EQUIPMENT LOCATIONS WITH

ARCHITECTURAL PLANS, ELEVATIONS, AND REVIEWED SHOP DRAWINGS. PRIOR TO MAKING

THE ACTUAL TELECOMMUNICATIONS INSTALLATION, ADJUST OUTLETS OR CONNECTION

LOCATIONS TO ACCOMMODATE FURNITURE AND/OR EQUIPMENT.

5. TELECOMMUNICATIONS EQUIPMENT SHALL BE MOUNTED TO ALLOW ACCESS TO

ELECTRICAL AND MECHANICAL EQUIPMENT. ALL MOUNTING OF TELECOMMUNICATION

DEVICES ON EQUIPMENT SUPPLIED BY ANOTHER CONTRACTOR SHALL BE APPROVED IN

ADVANCE BY THE OTHER CONTRACTOR.

6. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL OPENINGS REQUIRED IN WALLS. ALL

OPENINGS SHALL BE REPAIRED TO MATCH EXISTING BY A QUALIFIED CONTRACTOR AT THE

EXPENSE OF THIS CONTRACTOR. ALL CONDUITS THROUGH WALLS SHALL BE GROUTED OR

SEALED INTO OPENINGS.

7. ALL MATERIALS USED TO SEAL PENETRATIONS OF FIRE RATED WALLS AND FLOORS SHALL

BE TESTED AND CERTIFIED AS A SYSTEM PER ASTM E814 STANDARDS FOR FIRE TESTS OF

THROUGH-PENETRATION FIRESTOPS.

8. THE TECHNOLOGY CONTRACTOR IS RESPONSIBLE FOR REMOVAL AND REPLACEMENT OF

THE CEILINGS, CEILING TILES, AND CEILING GRID ASSOCIATED WITH THE AREAS OF WORK

BY ALL CONTRACTORS. NOTIFY THE GENERAL CONTRACTOR OF AFFECTED AREAS PRIOR

TO BIDDING.

9. ALL LADDER RACK AND CABLE TRAY SIZES ARE AS DEFINED ON THE DRAWINGS.

10. EACH CONTRACTOR IS RESPONSIBLE FOR DAMAGE CAUSED BY THEIR ACTIONS TO THE

WALLS, FLOORS, CEILINGS, AND ROOFS. THE CONTRACTOR WHOSE WORK CAUSES

DAMAGE IS RESPONSIBLE FOR PATCHING TO MATCH ORIGINAL CONSTRUCTION, FIRE

RATING, AND FINISH.

11. FLUSH MOUNT ALL TELECOMMUNICATION OUTLETS AT +18" FROM FLOOR (CENTERLINE

DIMENSION), EXCEPT WHERE OTHERWISE NOTED. OUTLETS MAY BE SURFACE MOUNTED

WHEN CONDUIT IS SPECIFIED EXPOSED.

12. MOUNT BACKBOXES FLUSH WITH WALL. ALL BACKBOX HEIGHTS ARE TO CENTERLINE

DIMENSION, UNLESS OTHERWISE NOTED.

13. PROVIDE RACEWAY AND BOXES LISTED FOR THE INSTALLED ENVIRONMENT. SEAL

RACEWAY AND BOX FROM WATER AND MOISTURE AT TRANSISTION BETWEEN DIFFERENT

ENVIRONMENTAL CONDITIONS SUCH AS INTERIOR/EXTERIOR, TEMPERATURE CHANGES,

ETC.

TECHNOLOGY INSTALLATION NOTES:

GENERAL NOTES:

1. ALL SYMBOLS AND ABBREVIATIONS LISTED MAY NOT BE APPLICABLE TO THIS PROJECT.

REFER TO THE TECHNOLOGY EQUIPMENT SCHEDULE FOR MORE COMPLETE DESCRIPTION

AND ITEMS.

2. ALL SYMBOLS AND ABBREVIATIONS REFER TO TECHNOLOGY SHEETS ONLY AS DEFINED ON

THE SHEET INDEX. REFER TO THE GENERAL TECHNOLOGY NOTES FOR ADDITIONAL

INFORMATION.

3. ALL SYMBOLS LISTED ABOVE ARE FOR REFERENCE ONLY. REFER TO PLANS AND LINE TYPE

KEY FOR NEW, EXISTING TO REMAIN AND TO BE REMOVED ITEMS FOR ADDITIONAL

INFORMATION.

CABLE TRAY, CHANNEL TRAY, BASKET

TRAY

WIDTH X HEIGHT

DIAMETERø C CONDUIT

CONDUIT DOWN

CONDUIT UP OR UP/DOWN

CONDUIT SLEEVE

CONTINUATION

PLAN OR DETAIL NUMBER

PLAN OR DETAIL NAME

PLAN OR DETAIL SCALE

DETAIL REFERRED TO BY SECTION CUT

SHEET DETAIL IS LOCATED ON

NAME

VIEW NAME

1/8" = 1'-0"

M101

SIMSIM

INDICATES SIMILAR DETAIL REFERENCED

IN MULTIPLE LOCATIONS

LEVEL NAME

10'-0" HEIGHT ABOVE

PROJECT 0'-0"

1 INDICATES NOTE USED TO DESCRIBE

ADDITIONAL INFORMATION ABOUT

WORK REQUIRED, SPECIFIC TO THE

SHEET AND/OR DETAIL

N O R

HT

INDICATES DIRECTION OF TRUE NORTH

VIEW KEY

LINE TYPE AND TAG KEY:

NEW WORK BY THIS CONTRACTOR (WIDE LINE)

NEW

EXISTING TO BE REMOVED (SHORT DASHED PATTERN)

NEW UNDERFLOOR OR UNDERGROUND (LONG DASHED PATTERN)

EXISTING TO REMAIN OR WORK BY OTHERS (NARROW LINE)

EXISTING

EXISTING TO BE REMOVED BY OTHERS (SHORT DASHED PATTERN)

EXISTING UNDERFLOOR OR UNDERGROUND (LONG DASHED PATTERN)

HALFTONING DOES NOT MODIFY SCOPE.

'TAG'-E TAGS WITH DASH 'E' INDICATES THE REFERENCED OBJECT IS EXISTING

TAG UNDERLINED TAG INDICATES OBJECT IS IN-SCOPE. IF NEW, ADDITIONAL

INFORMATION IS AVAILABLE IN A SCHEDULE, MATERIAL LIST, OR SYMBOL LIST

INDICATES AN EXISTING SYSTEM'S POINT OF CONNECTION/REMOVAL

T101

TEMPERATURE CONTROLS CONTRACTORT.C.C.

SECURITY CONTRACTORS.C.

AUDIO/VISUAL CONTRACTORA.V.C.

NURSE CALL CONTRACTORN.C.C.

CIVIL CONTRACTORC.C.

ASBESTOS ABATEMENT CONTRACTOR

FIRE PROTECTION CONTRACTORF.P.C.

HEATING CONTRACTORH.C.

PLUMBING CONTRACTORP.C.

GENERAL CONTRACTORG.C.

MECHANICAL CONTRACTORM.C.

VENTILATION CONTRACTORV.C.

ELECTRICAL CONTRACTORE.C.

A.C.

CONTRACTOR ABBREVIATION KEY

ABBR: DESCRIPTION:

TECHNOLOGY CONTRACTORT.C.

CONSTRUCTION MANAGERC.M.

FOOD SERVICE CONTRACTORF.S.C.

1. THE DRAWINGS INDICATE EXISTING ITEMS TO BE REMOVED. THE DRAWINGS ARE

INTENDED TO INDICATE THE SCOPE OF WORK REQUIRED AND DO NOT INDICATE EVERY

BOX, CONDUIT, OR WIRE THAT MUST BE REMOVED. THE CONTRACTOR SHALL VISIT THE

SITE PRIOR TO SUBMITTING A BID AND VERIFY EXISTING CONDITIONS.

2. ITEMS (i.e. RACKS, CABINETS, ETC.) REMOVED AND NOT RELOCATED REMAIN THE

PROPERTY OF THE OWNER. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE

DISPOSAL OF MATERIAL THE OWNER DOES NOT WANT TO REUSE OR RETAIN. (i.e., FOR

MAINTENANCE PURPOSES).

3. EXISTING TO REMAIN DEVICES WITHIN OR ADJACENT TO THE PATH OF CONSTRUCTION

SHALL BE PROTECTED IN PLACE. DEVICES THAT MUST BE REMOVED SHALL BE TESTED

PRIOR TO REMOVAL, PROTECTED FROM DAMAGE, AND RE-INSTALLED IN ITS ORIGINAL

LOCATION DURING THE NEW CONSTRUCTION PHASE OF THE PROJECT.

4. OBTAIN APPROVAL FROM THE OWNER BEFORE TURNING OFF THE POWER TO

EQUIPMENT, SYSTEMS, PANELS, ETC. COORDINATE ALL OUTAGES WITH OWNER.

CONDUIT CONCEALED IN WALL CONSTRUCTION MAY BE ABANDONED IN PLACE IF NOT

AFFECTED BY OTHER CONSTRUCTION.

5. ALL CONDUIT SHALL BE REMOVED WHERE WALLS ARE BEING REMOVED. WHERE

CONDUIT IS IN THE CONCRETE SLAB, CUT OFF FLUSH, PULL OUT WIRE, AND PLUG.

WHERE CONDUIT IS RUN EXPOSED, ALL ASSOCIATED CLAMPS, SUPPORTS, HANGERS,

ETC., SHALL ALSO BE REMOVED.

6. COORDINATE ALL WORK WITH OTHER CONTRACTORS AT THE JOB SITE BEFORE

REMOVING EXISTING EQUIPMENT AND INSTALLING NEW ITEMS.

7. EXISTING CONDUIT IN GOOD CONDITION, MAY BE REUSED IN PLACE. RELOCATING

EXISTING CONDUIT SHALL NOT BE ALLOWED. BONDING CONDUCTORS SHALL BE

INSTALLED IN ALL REUSED CONDUIT TO ASSURE PROPER GROUND PATH.

8. EQUIPMENT REMOVAL IN CERTAIN LOCATIONS MAY REQUIRE THE INSTALLATION OF A

JUNCTION BOX TO RECONNECT CIRCUITS THAT REMAIN IN OPERATION. EXTEND

CONDUIT AND WIRING AS REQUIRED TO MAINTAIN POWER TO REMAINING EQUIPMENT.

9. DEVICES TO BE REMOVED SHALL HAVE ALL CONNECTED WIRING REMOVED TO THE

SOURCE.

10. DEVICES NOT TO BE REMOVED SHALL BE PROTECTED FROM THE ENVIRONMENT, AND

ALL ASSOCIATED CABLE/RACEWAYS ARE TO REMAIN AND BE PROTECTED. T.C. SHALL BE

RESPONSIBLE FOR REPAIR OF ANY INTERRUPTIONS TO PROTECTED DEVICES.

TECHNOLOGY DEMOLITION NOTES

TELECOMMUNICATIONS NETWORK RACK, 7'-0" HIGH, 45RU, 40"X48"

(NOMINAL), SQUARE PUNCHED RAIL, SINGLE PERFORATED FRONT

DOOR, SOLID REAR DOOR, TWO-POINT KEYED LOCKS, WHITE, SOLID

SIDE PANELS, VERTICAL EXHAUST DUCT (HEIGHT OF DUCT AS

REQUIRED TO CEILING)

SERVER CABINET, 45RU, 24"X48" (NOMINAL), SQUARE PUNCHED RAIL,

SINGLE PERFORATED FRONT DOOR, SOLID REAR DOOR, TWO-POINT

KEYED LOCKS, WHITE, SOLID SIDE PANELS, VERTICAL EXHAUST DUCT

(HEIGHT OF DUCT AS REQUIRED TO CEILING)

WIRE MESH CABLE TRAY 4" X 18" WITH SECOND LEVEL OF FIBER

CHANNEL PATHWAY 4" X 4"

TECHNOLOGY SHEET INDEX

TN700 TECHNOLOGY COVERSHEET

TN701 LEVEL 01 - TECHNOLOGY

TN702 TECHNOLOGY DETAILS

TN703 TECHNOLOGY EQUIPMENT ELEVATIONS

TN704 TECHNOLOGY RISER DIAGRAM

TN705 TECHNOLOGY EQUIPMENT SCHEDULE

B01A-TN700 TECHNOLOGY ENLARGED PLANS - EXISTING

B01A-TN701 TECHNOLOGY ENLARGED PLANS - PHASE 1

B01A-TN702 TECHNOLOGY ENLARGED PLANS - PHASE 2

B01A-TN703 TECHNOLOGY ENLARGED PLANS - PHASE 3

B01A-TN704 TECHNOLOGY ENLARGED PLANS - PHASE 4

B01A-TN705 TECHNOLOGY ENLARGED PLANS - PHASE 5

B01A-TN706 TECHNOLOGY ENLARGED PLANS - PHASE 6

B01A-TN707 TECHNOLOGY ENLARGED PLANS - PHASE 7

B01A-TN710 TECHNOLOGY ENLARGED PLANS - FINAL

GRAND TOTAL: 15

SUGGESTED MATRIX OF RESPONSIBILITY

ITEM: SHOWN ON:

FURNISHED

BY:

INSTALLED

BY: NOTES:

TECHNOLOGY ROUGH-IN, REFER TO

TECHNOLOGY EQUIPMENT SCHEDULE

AND SPECIFICATIONS FOR DEFINITION

T-SERIES E.C. E.C. 3. 4.

INFORMATION OUTLET FACEPLATES,

JACKS, AND TERMINATIONS

T-SERIES T.C. T.C.

CONDUIT SLEEVES (WHEN SHOWN ON

DRAWINGS)

T-SERIES E.C. E.C.

CONDUIT SLEEVES (NOT SHOWN BUT

REQUIRED FOR PROPER INSTALLATION

OF SYSTEM)

N/A T.C. T.C. 2. 4.

TELECOMMUNICATION SYSTEMS

ROUGH-IN

T-SERIES E.C. E.C. 1.

TELECOMMUNICATION EQUIPMENT,

CABLING, AND TERMINATIONS

T-SERIES T.C. T.C.

CABLE TRAY (INCLUDING WIRE BASKET

TRAY)

T-SERIES E.C. E.C.

LADDER RACK T-SERIES T.C. T.C. 5.

GROUNDING LUGS ON TECHNOLOGY

EQUIPMENT

T-SERIES T.C. E.C. 6.

BONDING SYSTEM FOR TECHNOLOGY

SYSTE

T-SERIES E.C. E.C. 7. 8.

CONNECTION OF TECHNOLOGY

BONDING SYSTEM TO THE ELECTRICAL

GROUND SYSTEM

T-SERIES E.C. E.C.

LINE VOLTAGE POWER (+120V OR

GREATER)

E-SERIES E.C. E.C.

LINE VOLTAGE POWER (NOT SHOWN

BUT REQUIRED FOR PROPER

INSTALLATION OF SYSTEM)

N/A T.C. E.C. 2. 4.

LOW VOLTAGE CABLING FOR

TECHNOLOGY SYSTEMS

T-SERIES T.C. T.C.

CABLE HANGERS AND SUPPORTS OR

OTHER CABLE ROUTING METHODS

(OTHER THAN CONDUIT AND CABLE

TRAY)

T-SERIES T.C. T.C. 5.

SUGGESTED MATRIX OF RESPONSIBILITY NOTES

1. LOCATIONS OF TELECOMMUNICATIONS ROUGH-INS SHALL BE INDICATED BY THE INFORMATION

OUTLET SYMBOLS ON THE DRAWINGS. REFER TO THE TECHNOLOGY SYMBOL LIST FOR

ADDITIONAL INFORMATION.

2. BASED ON THE INHERENT DIFFERENCES IN PRODUCTS FROM VARIOUS MANUFACTURERS, ALL

REQUIRED EQUIPMENT MAY NOT BE SHOWN ON THE DRAWINGS FOR ALL ACCEPTABLE

MANUFACTURERS.

3. INCLUDES BACKBOXES AND CONDUIT REQUIRED FOR THE TECHNOLOGY SYSTEMS

INSTALLATION. THE E.C. SHALL BASE THE BID ON THE BASIS OF DESIGN SHOWN ON THE

CONTRACT DOCUMENTS.

4. ALL CHANGES TO THE SLEEVES, BACKBOXES, CONDUITS, AND POWER REQUIRED BECAUSE OF

THE T.C.'S SELECTION OF AN ALTERNATE ACCEPTABLE MANUFACTURER OR FROM SYSTEM

CONFIGURATIONS THAT ARE LEFT TO THE CHOICE OF THE CONTRACTOR SHALL BE INCLUDED

IN THE T.C.'S BID. THIS BID SHALL INCLUDE INSTALLATION BY A LICENSED ELECTRICIAN.

5. UNLESS TRADE RULES DICTATE OTHERWISE.

6. FURNISHED AS PART OF THE EQUIPMENT WHEN POSSIBLE, OR FURNISHED TO THE E.C. FOR

INSTALLATION IN THE FIELD.

7. INCLUDES ALL CONDUCTORS, GROUND BARS, AND TERMINATIONS FOR THE COMPLETE

BONDING SYSTEM REQUIRED BY THE SPECIFICATIONS.

8. REFER TO ELECTRICAL DRAWINGS FOR LOCATIONS OF PANELS AND SWITCHBOARDS SHOWN

IN THE TECHNOLOGY BONDING RISER DIAGRAM AND TYPICAL TELECOM ROOM BONDING FLOW

DIAGRAM.

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:5

A M

TN700

TECHNOLOGY COVERSHEET VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

Revisions: Date:

B7-1

B7-2 B7-3 B7-4 B7-5

B7-6

B7-7 B7-8B7-9 B7-10B7-11 B7-12 B7-13 B7-14B7-15 B7-16B7-17B7-18 B7-19 B7-20B7-21 B7-22B7-23 B7-24

B7-A

B7-C

B7-D

B7-E B7-F

B7-G

B7-I

B7-K

B7-M

B7-PB7-Q

B7-R

B7-S

B7-X

B7-Y

B7-V

B7-AA

B7-CC

B7-DD

B7-EE

B7-FF

B7-25 B7-26 B7-27

B7-U

B5-1

B5-2

B5-3

B5-4

B5-5

B5-6

B5-7

B5-8

B5-9

B5-10

B5-11B5-12

B5-13

B5-14

B5-15 B5-16

B5-17

B5-18

B5-19

B5-20

B5-21

B5-22

B5-23

B5-24

B5-25

B5-26B5-27B5-28B5-29B5-30 B5-31 B5-32B5-33

B5-A

B5-B

B5-C

B5-D

B5-E

B5-F

B5-G

B5-H

B5-J

B5-K

B5-R

B5-Q B5-P

B5-N

B5-M

B5-L

B1A-M

B1A-LB1A-K.9

B1A-K.1B1A-KB1A-J.9

B1A-J.1B1A-JB1A-H.9

B1A-H.2

B1A-HB1A-G.9

B1A-H.3

B1A-G3 B1A-G2B1A-G

B1A-F

B1A-E

B1A-E.8 B1A-E.9

B1A-D.9 B1A-E.2

B1A-DB1A-C.9

B1A-D.2

B1A-CB1A-B.9

B1A-C.2

B1A-A

B1A-BB1A-B.2

B1A-1B1A-1.1 B1A-2 B1A-3 B1A-4 B1A-4.8B1A-5B1A-5.1 B1A-6B1A-7 B1A-7.9B1A-8 B1A-9B1A-9.5B1A-10 B1A-11 B1A-12B1A-11.5

27262524232221

M

L

K

J

H

G

F

E

D

C

B

A

N

PP1P2

P4P5

Q

R

S

T

U

U.7

V

V.8

W

18.818.417.517.116.215.915.31514.914

17 18 19

13121110

14.113.112.811.911.110.69.8

9.2 9.79.3

8.37.97.16. 25 .84.94.13.62.71.91.30.70.3

B7 -N

B7 -L

B7 -J

B7 -H

B7 -E.1

B7 -C.1

B7 - 27.1 B7 - 27.9B7 - 28 B7 - 28.8B7 - 29B7 - 29.9B7 - 30

B01A-TN710

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:0

A M

TN701

LEVEL 01 - TECHNOLOGY VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

1/32" = 1'-0"

LEVEL 01 PLAN - TECHNOLOGY

1 0 32' 64'16'

SC-GND-1

NEAREST

ELECTRICAL

PANEL

EQUIPMENT

RACK(S)

EQUIPMENT

CABINET(S)

BUILDING

STEEL

ACCESS

CONTROL

EQUIPMENT

LADDER RACK

(CONTINUOUS

BOND)

CABLE TRAY

(CONTINUOUS

BOND)

METALLIC

CONDUITS

AND SLEEVES

SURGE

SUPPRESSION

DEVICE(S)

SC-GND-1

5/16" (TYP)

BARE COPPER GROUND BAR. INSULATORS,

BRACKETS AND BONDING. REFER TO

TECHNOLOGY EQUIPMENT SCHEDULE SC-GND-2

FOR ADDITIONAL INFORMATION.

TWO HOLE COMPRESSION LUG

COPPER GROUND CONDUCTOR

FROM BUILDING SERVICE GROUND.

REFER TO SPECIFICATIONS FOR

DETAILS

1.

NOTES:

REFER TO TN704 TECHNOLOGY EQUIPMENT SCHEDULE SC-GND-2 FOR ADDITIONAL REQUIREMENTS.

1.97"

WIDTH

DEPTH

3.94"

118.2"

PART # DEPTH (IN) WIDTH (IN)

CAT 6A 4-PAIR

PLENUM (0.35")

CF 105/450 4 18 373

CF 150/450 6 18 536

SC-CT-#

RACK BONDING CONDUCTOR (6 AWG)

UNIT BONDING CONDUCTOR (6 AWG)

TOP MOUNTED RACK BONDING BUSBAR

RACK BONDING

CONDUCTOR

(6 AWG)

IRREVERSIBLE

COMPRESSION

CONNECTIONTELECOMMUNICATION

EQUIPMENT BONDING

CONDUCTOR (6 AWG)

CABLE TRAY BONDING CONDUCTOR

TYPICAL AT EACH SECTION CONNECTION POINT

TO TMGB

IRREVERSIBLE CRIMP

CONNECTOR

TELECOMMUNICATIONS

EQUIPMENT BONDING

CONDUCTOR

RACK BONDING CONDUCTOR

EXTENDED TO BOTTOM TO

ACCOMMODATE FUTURE GROWTH

INDIVIDUAL BONDING CONDUCTORS

FROM EACH PIECE OF EQUIPMENT

AND RACK TO THE RACK BONDING

CONDUCTOR

TWO HOLE COMPRESSION LUG

IRREVERSIBLE CRIMP

CONNECTOR

TO TMGB

EXAMPLE "A" EXAMPLE "B"

BASKET TRAY

1.

2.

3.

NOTES :

REFER TO DETAIL 2, THIS SHEET TELECOM ROOM BONDING FLOW DIAGRAM FOR ADDITIONAL INFORMATION.

REFER TO DETAIL 4, THIS SHEET RACK MOUNT GROUND BAR DETAIL FOR ADDITIONAL INFORMATION.

REFER TO TN704 FOR GENERAL TECHNOLOGY EQUIPMENT SCHEDULE.

MOLDED POLYESTER -

FIBERGLASS INSULATOR

COPPER GROUND CONDUCTOR FROM

BUILDING SERVICE GROUND. REFER

TO SPECIFICATIONS FOR DETAILS

TWO HOLE

COMPRESSION LUG

NOTES:

1. REFER TO TECHNOLOGY EQUIPMENT SCHEDULE SC-GND-1 FOR WIDTH

REQUIREMENTS.

2. REFER TO DETAIL 2, THIS SHEET FOR TYPICAL TELECOM ROOM BONDING FLOW

DIAGRAM.

COPPER BONDING CONDUCTOR TO

EQUIPMENT RACKS, CABLE TRAYS

& METALLIC SLEEVES. REFER TO

SPECIFICATIONS FOR DETAILS

BARE COPPER GROUND BAR,

INSULATORS, BRACKETS AND

BONDING PROVIDED BY E.C.

REFER TO TECHNOLOGY

EQUIPMENT SCHEDULE SC-GND-1

5/16" Ø

(TYP)

7/16" Ø

(TYP)

TELECOMMUNICATIONS

BONDING JUMPER (TBJ)

MAIN COMPUTER ROOM, MCR 1

TELECOMMUNICATIONS

BONDING JUMPER (TBJ)

TELECOMMUNICATIONS

BONDING JUMPER (TBJ)

NOTES:

1. THIS FLOW DIAGRAM IS DIAGRAMMATIC AND MAY NOT SHOW ACTUAL ROUTING OR QUANTITIES OF MATERIALS. THIS FLOW DIAGRAM IS SHOWN FOR CLARIFICATION OF CONNECTION LOCATIONS AND CONDUCTOR TYPE. ALL CONNECTIONS AND SYSTEM DEVICES SHOWN ARE TYPICAL AND NOT REPRESENTATIVE OF ACTUAL PROJECT QUANTITIES. REFER TO FLOOR PLANS AND ENLARGED FLOOR PLANS FOR ACTUAL QUANTITIES AND LOCATIONS OF DEVICES AND MORE SPECIFIC ROUTING INFORMATION.

2. ALL CONDUCTORS IN THE TECHNOLOGY BONDING SYSTEM SHALL BE MINIMUM SIZE OF 3/0 AWG PLENUM RATED COPPER (GREEN OR MARKED WITH A DISTINCTIVE GREEN COLOR) UNLESS CONDUCTOR LENGTH IS LESS THAN 66 FEET. REFER TO BONDING CONDUCTOR SIZING SCHEDULE FOR SIZING CRITERIA FOR CONDUCTORS LESS THAN 66 FEET IN LENGTH.

3. ALL BONDING CONDUCTORS AND BONDING JUMPERS SHALL BE CONNECTED BY COMPRESSION LUGS, EXOTHERMIC WELDING, OR IRREVERSIBLE COMPRESSION CONNECTORS. SOLDER IS NOT AN ACCEPTABLE MEANS OF CONNECTION. SHEET METAL SCREWS SHALL NOT BE USED TO CONNECT COMMUNICATIONS BONDING CONDUCTORS TO EQUIPMENT. WHERE NECESSARY, REMOVE PAINT AND/OR USE PAINT-PIERCING WASHERS TO PROVIDE PROPER ELECTRICAL BOND AT ALL CONNECTIONS.

4. REFER TO DETAIL 1, THIS SHEET FOR BONDING BUS BAR DETAIL AND ADDITIONAL INFORMATION AND REQUIREMENTS FOR SC-

GND-1.

KEYNOTES:

1. REFER TO B01A-TN710 FOR LOCATION INFORMATION.

2. INCLUDES HORIZONTAL AND VERTICAL CONDUIT SLEEVES FOR TECHNOLOGY CABLING.

3. TELECOMMUNICATIONS BONDING BACKBONE (TBB). REFER TO TELECOMMUNICATIONS ROOMS DETAILS FOR CONTINUATION.

4. BONDING CONDUCTOR FOR TELECOMMUNICATIONS (BCT), TO EXISTING ELECTRICAL ENTRANCE INTERSYSTEM BONDING

TERMINATION. REFER TO DETAIL 3, THIS SHEET FOR TECHNOLOGY BONDING RISER DIAGRAM FOR CONTINUATION AND ADDITIONAL

INFORMATION AND REQUIREMENTS.

5. REFER TO THE ELECTRICAL DRAWINGS FOR LOCATION.

6. PROVIDE SC-GND-2 RACK MOUNT TELECOMMUNICATIONS BONDING BUSBAR AT EACH EQUIPMENT RACK AND CABINET.

7. BONDING EQUALIZER (BE). REFER TO TELECOMMUNICATIONS ROOMS DETAILS FOR CONTINUATION.

CONDUCTOR

LENGTH IN FEET

BONDING CONDUCTOR SIZING SCHEDULE

MINIMUM ACCEPTABLE

SIZE - AWG

LESS THAN 13' 6

14' - 20' 4

21' - 26' 3

27' - 33' 2

34' - 41' 1

42' - 52' 1/0

53' - 66' 2/0

GREATER THAN 66' 3/0

FIRST

FLOOR

ELECTRICAL ENTRANCE

INTERSYSTEM BONDING

TERMINATION

GROUNDING ELECTRODE

CONDUCTOR BY OTHERS

EXISTING ELECTRICAL GROUNDING

ELECTRODE SYSTEM

MCR-01

NOTES:

1. THIS RISER IS DIAGRAMMATIC AND MAY NOT SHOW ACTUAL ROUTING OR QUANTITIES OF MATERIALS.

THIS RISER IS SHOWN FOR CLARIFICATION OF CONNECTION LOCATIONS AND CONDUCTOR TYPE. ALL CONNECTIONS AND SYSTEM DEVICES SHOWN ARE TYPICAL AND NOT REPRESENTATIVE OF ACTUAL PROJECT QUANTITIES. REFER TO FLOOR PLANS AND ENLARGED FLOOR PLANS FOR ACTUAL QUANTITIES

AND LOCATIONS OF DEVICES AND MORE SPECIFIC ROUTING INFORMATION.

2. ALL CONDUCTORS IN THE TECHNOLOGY BONDING SYSTEM SHALL BE MINIMUM SIZE OF 3/0 AWG PLENUM RATED COPPER (GREEN OR MARKED WITH A DISTINCTIVE GREEN COLOR) UNLESS CONDUCTOR LENGTH IS LESS THAN 66 FEET. REFER TO BONDING CONDUCTOR SIZING SCHEDULE FOR SIZING CRITERIA FOR

CONDUCTORS LESS THAN 66 FEET IN LENGTH.

3. ALL BONDING CONDUCTORS AND BONDING JUMPERS SHALL BE CONNECTED BY COMPRESSION LUGS, EXOTHERMIC WELDING, OR IRREVERSIBLE COMPRESSION CONNECTORS. SOLDER IS NOT AN

ACCEPTABLE MEANS OF CONNECTION. SHEET METAL SCREWS SHALL NOT BE USED TO CONNECT

COMMUNICATIONS BONDING CONDUCTORS TO EQUIPMENT. WHERE NECESSARY, REMOVE PAINT AND/OR

USE PAINT-PIERCING WASHERS TO PROVIDE PROPER ELECTRICAL BOND AT ALL CONNECTIONS.

4. REFER TO DETAIL 2, THIS SHEET FOR TYPICAL TELECOM ROOM BONDING FLOW DIAGRAM.

KEYNOTES:

1. BONDING CONDUCTOR FOR TELECOMMUNICATIONS (BCT). BCT SHALL BE THE SAME SIZE AS THE TBB OR

LARGER. REFER TO BONDING CONDUCTOR SIZING SCHEDULE FOR SIZING REQUIREMENTS.

2. CONNECTIONS TO OTHER ROOMS. REFER TO TELECOMMUNICATIONS ROOM DRAWINGS FOR

REQUIREMENTS.

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:1

A M

TN702

TECHNOLOGY DETAILS VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

NO SCALE

BONDING BUS BAR DETAIL

NO SCALE

TELECOM ROOM BONDING FLOW DIAGRAM

NO SCALE

TECHNOLOGY BONDING RISER DIAGRAM

NO SCALE

RACKMOUNT BONDING BUS BAR DETAIL

NO SCALE

CABLE TRAY CAPACITY

NO SCALE

PATHWAY, RACK, BONDING CONDUCTOR JOIN REQUIREMENT

1 2

1 2 1 2 1 2 1 2 1 21 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

1 2 1 21 2 1 2 1 2

1.

2.

KEYNOTES:

INSTALL (1) SC-GND-2 AT TOP RU ON REAR MOUNTING RAILS OF EACH CABINET.

INSTALL (2) SC-PDU-3 AT THE REAR OF EACH CABINET.

MDA "LEG A"

HDA "LEG A" HDA "LEG B"

MDA "LEG A"

RESERVED

FOR CORE,

SECURITY,

AND WAN

ELEMENTS

RESERVED

FOR A-SIDE

DISTRIBUTION

TO TR'S

(COORDINATE

WITH TR

DRAWINGS

FOR

REQUIRED

PATCH

PANELS)

MDA "LEG A"

RESERVED

FOR SPINE,

AGGREGATION,

AND OOB

SWITCHES AND

LAN

ELEMENTS

MDA "LEG B"

RESERVED

FOR SPINE,

AGGREGATION,

AND OOB

SWITCHES AND

LAN

ELEMENTS

MDA "LEG B"

RESERVED

FOR CORE,

SECURITY,

AND WAN

ELEMENTS

MDA "LEG B"

RESERVED

FOR A-SIDE

DISTRIBUTION

TO TR'S

(COORDINATE

WITH TR

DRAWINGS

FOR

REQUIRED

PATCH

PANELS)

SC-CAB-2

SC-CAB-2 SC-CAB-2SC-CAB-1 SC-CAB-1 SC-CAB-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1SC-BLK-1 SC-BLK-1 SC-BLK-1

SC-CAB-1 SC-CAB-1 SC-CAB-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-BLK-1 SC-BLK-1 SC-BLK-1

SC-CAB-1 SC-CAB-1 SC-CAB-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-BLK-1 SC-BLK-1 SC-BLK-1

SC-CAB-1 SC-CAB-1 SC-CAB-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-BLK-1 SC-BLK-1 SC-BLK-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-MPP-2

SC-BLK-1

SC-CAB-2

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-BLK-1

SC-CAB-2

SC-FDC-1

SC-BLK-1

SC-MPP-2

SC-BLK-1

SC-BLK-1

SC-CAB-2 SC-CAB-2 SC-CAB-2

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:1

A M

TN703

TECHNOLOGY EQUIPMENT

ELEVATIONS

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

NO SCALE

EQUIPMENT RACK ELEVATIONS

MDA

A SIDE

TR

DISTRIBUTION

A SIDE

DISTRIBUTION

B SIDE

DISTRIBUTION

TR

DISTRIBUTION

(TYP)(TYP)

TYPICAL OF (12) ROW 2 CABINETS

(SC-CAB-1 )

HDA

A SIDE

(TYP.)

(TYP.)

SC-CAB-2

HDA

B SIDE

(TYP.)

(TYP.)

SC-CAB-2

MDA

A SIDE

MDA

B SIDE

MDA

B SIDE

(TYP.)

(TYP.)

(TYP.)

(TYP.)

(TYP.)(TYP.)

MDA

A SIDE

MDA

B SIDE

1 12

ROW 1

MDA

1.

NOTES:

THIS RISER IS SHOWN FOR CLARIFICATION OF CONNECTION(S) AND CABLE TYPE. REFER TO FLOOR PLANS AND RACK ELEVATIONS FOR MORE

SPECIFIC QUANTITIES AND ROUTING INFORMATION.

ROW 2

1.

2.

A.

3.

A.

B.

C.

KEYNOTES:

FIBER OPTIC BACKBONE CABLING. REFER TO FIBER OPTIC BACKBONE RISER DIAGRAMS ON TN502 FOR

FIBER TYPES, AND QUANTITIES.

(4) 12F OM4 FIBER OPTIC CABLES, PRETERMINATED MPO CABLE TRUNKS. INSTALL A-SIDE ON LEFT OF

ENCLOSURE, B-SIDE ON RIGHT OF ENCLOSURE.

PROVIDE (1) 12F LC MPO TYPE-A CASSETTE PER TRUNK. LEVITON HDX ENTERPRISE MTP, OR

EQUIVALENT.

(8) 6-CABLE CATEGORY 6A, TIA 568-B, UNSHIELDED TWISTED PAIR, CMP, PRE-TERMINATED CABLE

ASSEMBLY. PROVIDES (48) CAT 6A CABLES TOTAL. PROVIDES (48) TOTAL CAT 6A CABLES.

BERK-TEK LANMARK-10G2 CABLE, OR EQUIVALENT

LEVITON ATLAS-X1 E2XHD CONNECTIVITY, OR EQUIVALENT

PROVIDE WITH BLUE JACKS FOR CABLES SERVED FROM HDA A-SIDE. PROVIDE YELLOW JACKS FOR

CABLES SERVED FROM HDA B-SIDE.

4.

A.

5.

A.

B.

C.

KEYNOTES:

(2) 12F OM4 FIBER OPTIC CABLES, PRETERMINATED MPO CABLE TRUNKS. INSTALL A-SIDE ON LEFT OF

ENCLOSURE, B-SIDE ON RIGHT ON ENCLOSURE.

PROVIDE (1) 12F LC MPO TYPE-A CASSETTE PER TRUNK. LEVITON HDX ENTERPRISE MTP, OR

EQUIVALENT.

(4) 6-CABLE CATEGORY 6A, TIA 568-B, UNSHIELDED TWISTED PAIR, CMP, PRE-TERMINATED CABLE

ASSEMBLY. PROVIDES (24) CAT 6A CABLES TOTAL. PROVIDES (24) TOTAL CAT 6A CABLES.

BERK-TEK LANMARK-10G2 CABLE, OR EQUIVALENT

LEVITON ATLAS-X1 E2XHD CONNECTIVITY, OR EQUIVALENT

PROVIDE WITH BLUE JACKS FOR CABLES SERVED FROM HDA A-SIDE. PROVIDE YELLOW JACKS FOR

CABLES SERVED FROM HDA B-SIDE.

SC-FDC-1

SC-FDC-1 SC-FDC-1 SC-FDC-1 SC-FDC-1

SC-MPP-2 SC-MPP-2

SC-MPP-2

SC-FDC-1

SC-FDC-1

SC-MPP-2

SC-MPP-2

SC-FDC-1

SC-FDC-1

SC-MPP-2

SC-MPP-2

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:1

A M

TN704

TECHNOLOGY RISER DIAGRAM VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

NO SCALE

FIBER & COPPER RISER DIAGRAM

SC-MPP-2 ANGLED MODULAR PATCH PANEL, 48 MODULAR HIGH DENSITY CATEGORY 6A RJ-45 TERMINATIONS, MOUNTS DIRECTLY TO EIA/TIA STANDARD 19" RELAY RACK, PORT IDENTIFICATION NUMBERS, PROVIDED WITH COLOR CODING AND LABEL HOLDER KITS, U.L.

LISTED. REQUIRES (1) 1.75" MOUNTING SPACES.

INSTALL BLUE A-SIDE PRE-TERMINATED TRUNKS ON LEFT SIDE. INSTALL YELLOW B-SIDE PRE-TERMINATED TRUNKS ON RIGHT SIDE.

PROVIDE WITH ANGLED PANEL COVER AND REAR CABLE MANAGER.

LEVITON

PATCH PANEL:

E2XHD-BLK

OR EQUIVALENT

SC-PDU-3 POWER STRIP, VERTICALLY MOUNTS IN A STANDARD 19” RACK OR CABINET. 120/208V NOMINAL INPUT VOLTAGE, 208V NOMINAL OUTPUT VOLTAGE, 20A. NEMA L21-20P INPUT CONNECTIONS. (30) IEC 60320 C13, (6) IEC 60320 C19 OUTPUT CONNECTIONS.

PROVIDE WITH (2) PDU FOR EACH MCR-01 NETWORK CABINET.

CHATSWORTH

eCONNECT SERIES

EA-3017-C

OR EQUIVALENT

SC-TTB TELECOMMUNICATIONS TERMINAL BOARD, 4’X8’X3/4” A-C GRADE FIRE-RATED PLYWOOD. EXPOSED SIDE SHALL BE SMOOTH.

MOUNT VERTICALLY WITH TOP OF PLYWOOD AT 8’-6” AFF. IN THE EVENT THE MANUFACTURER’S RATING STAMP IS NOT VISIBLE ON THE SMOOTH SIDE, THE CONTRACTOR SHALL PROVIDE A LAMINATED LETTER FROM THE MANUFACTURER OR SUPPLIER CERTIFYING THAT THE PLYWOOD IS FIRE-RATED AND ATTACH THE LETTER WITH A PICTURE OF THE RATING STAMP, TO THE

PLYWOOD.

FIRE RATED PLYWOOD SHALL NOT BE PAINTED OR TREATED WITH ANY TYPE OF SEALANT THAT WOULD LESSEN THE INTEGRITY OF

THE FIRE RATING.

THE EQUIPMENT LIST ABBREVIATIONS AND THE GENERAL TECHNOLOGY EQUIPMENT SCHEDULE ARE FOR THE CONVENIENCE OF THE CONTRACTOR. EACH CONTRACTOR SHALL BE RESPONSIBLE FOR VERIFICATION OF QUANTITIES AND SHALL FURNISH ALL MATERIAL REQUIRED, WHETHER SPECIFIED OR NOT, TO PRODUCE A SATISFACTORY WORKING SYSTEM.

CATALOG NUMBERS ARE NOT TO BE CONSIDERED COMPLETE BUT ARE GIVEN ONLY TO AID THE CONTRACTOR IN THE SEARCH FOR MATERIAL. NO MATERIAL SHALL BE ORDERED BY MANUFACTURER AND CATALOG NUMBER ONLY. EACH CONTRACTOR SHALL FIRST READ THE COMPLETE DESCRIPTION OF THE MATERIAL ON THESE DRAWINGS AND SPECIFICATIONS.

THE FIRST MANUFACTURER LISTED IS THE BASIS OF DESIGN. "STANDARD COLOR" INDICATES FACTORY FINISH AVAILABLE AT NO ADDITIONAL CHARGE.

TECHNOLOGY EQUIPMENT SCHEDULE

EQUIPMENT LIST

ABBREVIATION EQUIPMENT LIST DESCRIPTION

EQUIPMENT LIST

MANUFACTURER AND

MODEL

SC-BLK-1 RACK BLANKING PANEL, ANGLED. 1RU, 19" RACK MOUNT. LEVITON

49254-BA1

OR EQUIVALENT

SC-CAB-1 ENCLOSED CABINET, FLOOR MOUNT, 84.6"H X 23.6"W X 43.3"D, 19" PANEL MOUNTING, SQUARE PUNCH CAGE NUT RAILS, 45RU.

PERFORATED METAL FRONT DOOR WITH KEYED SWING HANDLE LOCK, SOLID METAL REAR DOOR WITH KEYED SWING HANDLE

LATCH. SOLID SIDE PANELS. VERTICAL EXHAUST DUCT SYSTEM 20"-34".

PROVIDE EACH CABINET WITH ALL ACCESSORIES LISTED.

PROVIDE EACH CABINET WITH (45) RU OF BLANKING PANELS.

CHATSWORTH

F-SERIES TERAFRAME GEN3:

FF1N-111C-E52-B (WHITE)

ACCESSORIES:

CHATSWORTH

024-739003-E63 024-739060-E03 024-739064-703 024-739070-E03 024-739074-703 024-739191-E12 024-739046-E63 024-739200-002 024-739110-701 39110-C01 024-739107-E00 024-739240-003 024-739029-001 024-735077-002 39085-E03 39137-703 39132-E00 31920-E03

OR EQUIVALENT

SC-CAB-2 ENCLOSED CABINET, FLOOR MOUNT. 83.4"H X 40"W X 43.3"D. 19" PANEL MOUNTING, SQUARE PUNCHED CAGE NUT RAILS, 45RU.

PERFORATED METAL FRONT DOOR WITH KEYED SWING HANDLE LOCK, SOLID METAL REAR DOOR WITH KEYED SWING HANDLE

LOCK. VERTICAL EXHAUST DUCT SYSTEM 20"-34".

PROVIDE WITH (2) SIDE PANELS WITH BRUSHED SEALED CABLE OPENINGS.

CHATSWORTH

N-SERIES TERAFRAME

GEN3:

NF8N-115C-E52-1 (WHITE)

SIDE PANELS:

39043-E63

OR EQUIVALENT

SC-CT-1 CABLE TRAY, WIRE MESH TYPE, 4" LOADING DEPTH, 18" WIDTH, COMPLETE WITH ALL FITTINGS AND MOUNTING HARDWARE.

PROVIDE TRAPEZE SUPPORT WITH PLASTIC RETAINER. CUTTING OF THE MESH CABLE TRAY SHALL BE DONE WITH OFFSET BOLT CUTTERS ONLY. 10' MAXIMUM SUPPORT SPAN. EITHER SPLICE WASHERS OR TERMINAL GROUND SUPPORT AND JUMPER WIRE SHALL BE USED TO ATTAIN GROUNDING CONTINUITY THROUGHOUT. Z-BRACKETS SHALL BE USED FOR WALL MOUNTED APPLICATIONS. REFER TO MANUFACTURERS INSTALLATION INSTRUCTIONS FOR ADDITIONAL INFORMATION.

PROVIDE IN WHITE POWDERCOAT FINISH.

CABLOFIL

CF105/450

OR EQUIVALENT

SC-FDC-1 ANGLED OPTICAL FIBER DISTRIBUTION CABINET, RACK MOUNT. HIGH DENSITY 144 FIBER MAXIMUM CAPACITY.

FOR PRETERMINATED TRUNKS FOR MCR-01 HDA DISTRIBUTION PROVIDE WITH OM4/OS1 MTP TYPE CASSETTES AS NECESSARY

(LEVITON HDX ENTERPRISE SPMPH SERIES)

FOR CAMPUS TR DISTRIBUTION PROVIDE WITH OM4/OS1 LC, FUSION SPLICE TYPE CASSETTES AS NECESSARY (LEVITON HDX

ENTERPRISE SPLCH SERIES)

REQUIRES (1) 19" X 1.75" RACK MOUNTING SPACES.

LEVITON

ENCLOSURE:

OPT-X UHDX (ANGLED)

REAR CABLE MANAGER:

E2XHD-CMB

OR EQUIVALENT

SC-GND-1 GROUNDING BUSBAR, WALL MOUNT. 4" H X 20" L X 1/4" D COPPER, ELECTRICALLY ISOLATED BY INSULATORS INTEGRAL TO MOUNTING BRACKETS. COPPER GROUND BAR IS 1/4" THICK AND STAND OFF 2.75" FROM WALL. THE 12" BUSBAR PROVIDES CONNECTION FOR EIGHTEEN (18) 2-HOLE COMPRESSION LUGS RESPECTIVELY WITH 5/8" OR 1" CENTERS. ANSI/TIA-607 AND BICSI

COMPLIANT. UL LISTED.

REFER TO GROUND BAR DETAIL 1/TN702.

CHATSWORTH

40158-020

OR EQUIVALENT

SC-GND-2 19" RACK-MOUNT HORIZONTAL GROUND BAR. (3/16" x 3/4" X 19") PROVIDES CONNECTION FOR (10) 2-HOLE COMPRESSION LUGS RESPECTIVELY WITH 5/8" OR 1" CENTERS. ANSI/TIA-607 AND BICSI COMPLIANT. UL LISTED.

REFER TO GROUND BAR DETAIL 4/TN702.

CHATSWORTH

10610-019

OR EQUIVALENT

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:1

A M

TN705

TECHNOLOGY EQUIPMENT

SCHEDULE

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

N/A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

B1A-C

B1A-B.9

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

RK-B06

RK-B07

RK-B09

RK-B10

RK-E09 RK-F09

R K

-J

R K

-I

R K

-H

RK-I05

RK-J04

RK-J02APC

APC

CISCO

1-CRU-2

1-CRU-1

COMPUTER

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:3

A M

B01A-TN700

TECHNOLOGY ENLARGED PLANS -

EXISTING

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - EXISTING

0 2' 4'1'

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

RK-B06

RK-B07

RK-B09

RK-B10

RK-E09 RK-F09

R K

-J

R K

-I

R K

-H

RK-I05

RK-J04

RK-J02APC

APC

CISCO

PHASING NOTES:

a. BUILD EXPANSION AREA AND TAKE OUT THE EXISTING WEST WALL OF

THE DATA CENTER.

b. INSTALL WEST CRAC UNIT.

c. INSTALL CABLE TRAY THROUGHOUT DATA CENTER.

d. INSTALL CLEAN AGENT FIRE SUPPRESSION SYSTEM THROUGHOUT

MCR.

e. REMOVE EXISTING WET PIPE FIRE SUPPRESSION SYSTEM IN THE

MCR.

f. INSTALL NEW RACKS STARTING WITH THE EXPANSION AREA (GET

THE A SIDE HDA, MDAS, UPS, AND THREE OF THE SERVER RACKS

INSTALLED).

g. PULL A-SIDE FIBER WITHIN THE MCR (FROM MDA TO HDA).

h. RELOCATE CORE SWITCH FROM BUILDING 6 INTO MCR A-SIDE MDA.

i. VA SHALL RELOCATE EXISTING EQUIPMENT IN CABINETS RK-B06, RK-

B07, RK-B09 TO THE THREE NEW SERVER RACKS.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

SC-GND-1

SC-TTB

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:3

A M

B01A-TN701

TECHNOLOGY ENLARGED PLANS -

PHASE 1

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 1

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

RK-B06

RK-B07

RK-B09

RK-B10

RK-E09 RK-F09

R K

-J

R K

-I

R K

-H

RK-I05

RK-J04

RK-J02APC

APC

CISCO

PHASING NOTES:

a. REMOVE RAISED FLOORING SOUTH OF THE COLUMN UP TO RK-B10

(GOING FROM PLAN WEST TO EAST). REMOVE RAMP.

b. INSTALL FOURTH SERVER RACK.

c. VA SHALL RELOCATE EXISTING EQUIPMENT IN CABINET RK-B10 TO

NEW SERVER RACK.

d. REMOVE RACKS RK-B06, RK-B07, RK-B09, AND RK-B10.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:4

A M

B01A-TN702

TECHNOLOGY ENLARGED PLANS -

PHASE 2

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 2

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

RK-E09 RK-F09

R K

-J

R K

-I

R K

-H

RK-I05

RK-J04

RK-J02APC

APC

CISCO

PHASING NOTES:

a. REMOVE RAISED FLOORING SOUTH OF THE COLUMN UP TO RK-E09.

b. INSTALL FIFTH AND SIXTH SERVER RACKS.

c. VA SHALL RELOCATE EXISTING EQUIPMENT IN CABINETS RK-E09 AND

RK-F09 TO NEW SERVER RACKS, CONSOLIDATING AS WE GO.

d. REMOVE RACKS RK-E09 AND RK-F09.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:4

A M

B01A-TN703

TECHNOLOGY ENLARGED PLANS -

PHASE 3

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

0 2' 4'1' 1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 3

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

R K

-J

R K

-I

R K

-H

RK-I05

RK-J04

RK-J02APC

APC

CISCO

PHASING NOTES:

a. REMOVE RAISED FLOORING SOUTH OF THE COLUMN UP TO RK-H10.

b. INSTALL SEVENTH, EIGHTH, AND NINTH SERVER RACKS.

c. REMOVE RACKS RK-H10, RK-I10, AND RK-J10.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:4

A M

B01A-TN704

TECHNOLOGY ENLARGED PLANS -

PHASE 4

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

0 2' 4'1' 1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 4

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

RK-I05

RK-J04

RK-J02APC

APC

CISCO

PHASING NOTES:

a. REMOVE REMAINING RAISED FLOORING SOUTH OF THE COLUMN.

b. INSTALL TENTH, ELEVENTH, TWELFTH SERVER RACKS AND HDA B

SIDE.

c. VA SHALL RELOCATE EXISTING EQUIPMENT IN RACKS RK-J02, RK-J04, AND RK-I05, CONSOLIDATING ALL THE WHILE.

d. REMOVE RACKS RK-J02, RK-J04, AND RK-I05.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:4

A M

B01A-TN705

TECHNOLOGY ENLARGED PLANS -

PHASE 5

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

0 2' 4'1' 1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 5

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

APC

APC

CISCO

PHASING NOTES:

a. REMOVE CISCO AND APC RACKS.

b. REMOVE REMAINING RAISED FLOORING THROUGHOUT MAIN

COMPUTER ROOM.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:4

A M

B01A-TN706

TECHNOLOGY ENLARGED PLANS -

PHASE 6

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

0 2' 4'1' 1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 6

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

PHASING NOTES:

a. INSTALL MDAS B-SIDE AND UPS B-SIDE.

b. VA SHALL RELOCATE EXISTING EQUIPMENT FROM OTHER ROOMS IN

THE FACILITY, CONSOLIDATING ALL THE WHILE.

c. INSTALL EAST CRAC UNIT.

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA (HDA) B-SIDE

3. MAIN DISTRIBUTION AREA (MDA) A-SIDE

4. MAIN DISTRIBUTION AREA (MDA) B-SIDE

5. UPS A

6. UPS B

7. COMPUTER ROOM A/C UNIT

8. CABLE TRAY WATERFALL TO ABOVE CEILING AND (7) 4"C STACKED 3-TOP

AND 4-BOTTOM ABOVE ADJACENT ROOM CEILING.

3333 33

55555555

4444 44

66666666

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:5

A M

B01A-TN707

TECHNOLOGY ENLARGED PLANS -

PHASE 7

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

0 2' 4'1' 1/2" = 1'-0"

ENLARGED DATA CENTER PLAN - PHASE 7

B1A-C.2

B1A-B

B1A-B.2

B1A-3 B1A-4 B1A-4.8 B1A-5 B1A-5.1

11 22

3333 33 44

55555555 66666666

SERVER ROOM

E107

STAFF / TECH CLERICAL

E108

SC-GND-1SC-TTB

101 NORTH SEVENTH STREET

LOUISVILLE, KY 40202

P: 502.236.2344 www.imegcorp.com

PROJECT #22005162.00

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

KEYPLAN N

AW

GF

E D

BW

CW CE

J

BE

AE

7D 7E

7B7C

7A

5A

10360 Ellison Circle Omaha, NE 68134 Phone: 402.991.5520 www.specializedeng.com SES Project : 22122

1221 N. Pennsylvania St.

Indianapolis, IN 46202 Phone: 317.800.6388 www.guidondesign.com

GD Project : 22.3101

5BE5BW

35% SCHEMATIC DESIGN 10/31/2022

65% DESIGN DEVELOPMENT 05/03/2023

95% CONSTRUCTION DOCUMENTS 08/16/2023

100% FINAL BID DOCUMENTS 09/27/2023

100% FINAL STAMPED BID DOCUMENTS 10/11/2023

10.11.23

B

IM

/2

.3

V A

M e m p h is

E H

R M

I n fr a s tr u c tu re /6

-7

.B

A

.T

D A

T A

C E

N T

E R

R

.r v t

/1 /2

:4

:5

A M

B01A-TN710

TECHNOLOGY ENLARGED PLANS -

FINAL

VA Memphis EHRM Infrastructure

MEMPHIS, TN

614-22-700

B01A

10/11/2023 DL AM

100% FINAL BID

DOCUMENTS

FULLY SPRINKLERED

1/2" = 1'-0"

ENLARGED DATA CENTER PLAN

KEY NOTES:

1. HORIZONTAL DISTRIBUTION AREA (HDA) A-SIDE

2. HORIZONTAL DISTRIBUTION AREA…