Attachment_A.2_Typical_Section_-_S_Apopka_Ave_from_E_Highland_Blvd_to_E_Hill_St.pdf

This is a typical road section specification document for Citrus County, Florida's road resurfacing project on S Apopka Avenue from E Highland Boulevard to E Hill Street. The project involves milling 2.25 inches of existing asphalt and resurfacing with a 2.25-inch lift of FC 12.5 hot-mix asphalt using PG 76-22 polymer-modified binder at Traffic Level C. The work must comply with current County specifications and FDOT Standard Specifications for Road and Bridge Construction. The roadway section includes two 18-foot lanes with a grass median and a 100-foot right-of-way width. The document serves as Attachment A.2 to ITB 25-111, establishing the standard cross-section and tie-in details for curb and gutter work.

The specification is part of a broader Small County Outreach Program (SCOP) road resurfacing initiative covering approximately 3.6 miles of S Apopka Avenue from US 41 to E Anna Jo Drive. The project is divided into two distinct segments with varying specifications: the first segment from US 41 to Daffodil Street requires minimum 2.25-inch milling and resurfacing, while the second segment from Daffodil Street to E Anna Jo Drive requires 2.5-inch milling followed by two 1.5-inch lifts of the same asphalt mix. All asphalt placement must utilize a Material Transfer Vehicle for continuous, non-contact transfer, with direct truck-to-paver dumping prohibited. Asphalt must be sourced from a single FDOT-approved production facility unless prior County written approval is obtained, and all mix designs and assignment sheets must be submitted with the bid.