Attachment 8 PWS - DIA Region IV FSS Appendix F Applicable Codes 20220715.docx
DOCX document 44 KB Posted
- Solicitation number
- W912DY-23-R-0015
About this file
This document outlines applicable codes, standards, and regulations for facility support services. The contractor must comply with all relevant federal, state and local laws regarding environmental protection, occupational safety and health, hazardous materials management, and more. Specific publications are listed that cover topics like electrical safety, fire protection, plumbing, heating and cooling systems, fuel management, asbestos handling, integrated pest management and more. The contractor must also adhere to Air Force, Army, Navy and Department of Defense regulations as applicable depending on installation location.
The related federal contract opportunity is a solicitation for facility support services at Defense Intelligence Agency facilities in the National Capital Region, including the agency's headquarters, Joint Base Anacostia-Bolling, Fort Detrick, locations in Reston and Charlottesville, Virginia, and the Defense Logistics Operations Center. The requirement is set aside 100% for competitive award under the 8(a) Business Development Program through the Small Business Administration.
View the file
Other files
Show all 34
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PWS Appendix F DIA Region IV FSS Applicable Codes, Standards, And Regulations E.1 General.
The contractor shall be knowledgeable of and comply with all applicable Federal, State, and local laws, Air Force regulations, and requirements regarding environmental protection, whichever is most stringent. The contractor shall ensure policies and procedures are established that are sufficient to protect the health and safety of employees and the community and minimize/eliminate the risk of environmental pollution. The Contractor shall comply with Joint Base Anacostia Bolling Hazardous Waste Management Plan. The Contractor shall adhere to all applicable publications, manuals, codes, standards, regulations, and local policies and procedures as specified herein. Where no codes, standards, and regulations are specified, the contractor shall determine applicable codes, standards, and develop procedures to apply to the situation. All codes, standards, and regulatory requirements referenced by the contractor shall be based on the latest edition of applicable codes (with specific dates identified) and industry practices at the time of contract award.
E.2 Government’s Right to Contractor’s Operating Logs and Forms.
The Government will have full ownership to use, duplicate, or disclose contractor’s operating logs and forms, in whole or part, in any manner, for purposes associated with execution of this contract only. Purpose of this statement is to minimize disruptions in service and preserve historical data in the event the contractor is changed.
E.3 Applicable Publications.
The codes, standards, and government regulations listed below are typical of the types and level of those required in this contract. This list is representative; it is in no way complete for the variety of services provided by this contract. Any contractor provided publications are to be procured and maintained at contractor’s expense.
| 29 CFR 1910 | Occupational Safety & Health Standards |
| 29 CFR 1926 | Safety & Health Regulations for Construction |
| 40 CFR 61 | National Emission Standards for Hazardous Air Pollutants |
| 40 CFR 82 | Protection of Stratospheric Ozone |
| 40 CFR 112 | Oil Pollution Prevention |
| 40 CFR 122 | EPA Administered Permit Programs: The National Pollution Discharge Elimination System |
| 40 CFR 141 | National Primary Drinking Water Regulations |
| 40 CFR 261 | Identification and Listing of Hazardous Waste |
| 40 CFR 266 | Standards for the Management of Specific Hazardous Wastes and Specific Types of Hazardous Waste Management Facilities |
| 40 CFR 268 | Land Disposal Restrictions |
| 40 CFR 273 | Standards for Universal Waste Management |
| 40 CFR 279 | Standards for the Management of Used Oil |
| 40 CFR 280 | Technical Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks |
| 40 CFR 300 | National Oil & Hazardous Substances Pollution Contingency Plan |
| 40 CFR 302 | Designation, Reportable Quantities, and Notification |
| 40 CFR 355 | Emergency Planning and Notification |
| 40 CFR 370 | Hazardous Chemical Reporting: Community Right-to-know |
| 40 CFR 372 | Toxic Chemical Release Reporting: Community Right-to-know |
| 40 CFR 403 | General Pretreatment Regulations for Existing and New Sources of Pollution |
| 40 CFR 761 | Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions |
| 40 CFR 763 | Asbestos |
| 41 CFR | Public Contracts & Property Management |
| 49 CFR 172 | Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, Training Requirements, and Security Plans |
| AFETL 11-6 | Utilities Reporting for Air force Installations |
| AFETL 13-6 | Energy Efficient Motors and Adjustable Speed Drives |
| AFGM 2017-32-01 | Civil Engineer Control Systems Cybersecurity |
| AFH 32-1290(I) | Cathodic Protection Field Testing |
| AFI 23-201 | Fuels Management |
| AFI 23-204 | Organizational Fuel Tanks |
| AFI 32-1051 | Roof Systems Management |
| AFI 32-1052 | Facility Asbestos Management |
| AFI 32-1053 | Integrated Pest Management Program |
| AFI 32-1054 | Corrosion Control |
| AFI 32-1061 | Providing Utilities to USAF Installations |
| AFI 32-1062 | Electrical Power Plants and Generators |
| AFI 32-1064 | Electrical Safe Practices |
| AFI 32-1065 | Grounding Systems |
| AFI 32-1066 | Backflow Prevention Program |
| AFI 32-1067 | Water Systems |
| AFI 32-1068 | Heating Systems and Unfired Pressure Vessels |
| AFI 32-1069 | Gas Supply and Distribution |
| AFI 32-7001 | Environmental Management |
| AFI 32-7040 | Air Quality Compliance and Resource Management |
| AFI 32-7041 | Water Quality Compliance |
| AFI 32-7042 | Waste Management |
| AFI 32-7044 | Storage Tank Environmental Compliance |
| AFI 32-7086 | Hazardous Materials Management |
| AFI 64-106 | Air Force Industrial Labor Relations Activities |
| AFI 90-821 | Hazard Communication |
| AFI 90-1701 | Energy Management |
| AFI 91-202 | The USAF Mishap Prevention Program |
| AFI 91-302 | Air Force Occupational and Environment Safety, Fire Protection, and Health (AFOSH) Standards |
| AFJMAN 23-227(I) | Storage and Handling of Liquefied and Gaseous Compressed Gasses and their Full and Empty Cylinders |
| AFJMAN 32-1082 | Facilities Engineering Electrical Exterior Facilities |
| AFJMAN 32-1083 | Facilities Engineering Electrical Interior Facilities |
| AFMAN 91-203 | Air Force Occupational Safety, Fire and Health Standards |
| AFPD 90-17 | Energy Management |
| ANSI A 117.1.2009 | Accessible and Usable Buildings and Facilities |
| ANSI/ASME B31.1 | Power Piping |
| ANSI C2 | National Electrical Safety Code |
| ANSI/ASME CSD – 1 | Control and Safety Devices for Automatically Fired Boilers |
| ANSI/API Standard 527 | Seat Tightness of Pressure Relief Valvs |
| AFPAM 32-1192 | Energy Efficient Motors and Adjustable Speed Drives |
| ASHRAE | Handbook, HVAC Applications |
| ASHRAE Guideline 3 | Reducing Emission of Fully Halogenated Chlorofluorocarbon (CFC) |
| ASHRE 34 | Designation and Safety Classification of Refrigerants |
| ASHRE 15 | Safety Standard for Refrigeration Systems |
| ASME | Section VI & Section VII Boiler and Pressure Vessel Code |
| DFARS 222.402-70 | Installation Support Contracts |
| DFARS 245.505.14 | Reports of Government Property |
| DoDD 8140.01 | Cyberspace Workforce Management |
| DoD 8570.01-M | Information Assurance Workforce Improvement Program |
| DoDI 1100.22 | Policy and Procedures for Determining Workforce Mix |
| EM 385-1-1 | Safety and Health Requirements |
| Executive Order 12731 | Principles of Ethical Conduct for Government Officers and Employees |
| Executive Order 13123 | Executive Order 13123, “Greening the Government Through Efficient Energy Management”, Section 401, and Section 403 (b) |
| MFGR GUIDES | Manufacturer’s Operating and Maintenance Guides |
| NB-23 | National Board of Boiler and Pressure Vessel Inspection Code |
| NEBB | NEBB Procedural Standards for testing, adjusting, and balancing of environmental systems |
| NFPA 54 | National Fuel Gas Code |
| NFPA 55 | Compressed Gasses and Cryogenic Fluids Code |
| NFPA 70 | National Electric Code |
| NFPA 70B | Recommended Practice for Electrical Equipment Maintenance |
| NFPA 70E | Standard for Electrical Safety in the Workplace |
| NFPA 72 | National Fire Alarm and Signaling Code |
| NFPA 72A | National Fire Alarm Code Electrical Equipment Maintenance |
| NFPA 72C | National Fire Alarm Code Installation, Maintenance, and Use of Remote Station Protective Signaling Systems |
| NFPA 72D | National Fire Alarm Code Installation, Maintenance, and Use of Proprietary Protective Signaling |
| NFPA 72E | National Fire Alarm Code Automatic Fire Detectors |
| NFPA 72G | National Fire Alarm Code Installation, Maintenance, and Use of Notification Appliances for Protective Signaling Systems |
| NFPA 72H | National Fire Alarm Code Testing Procedures for Local, Auxiliary, Remote Station, and Proprietary Protective Signaling Systems |
| NFPA 80 | Standards for Fire Doors and Other Opening Protectives |
| NFPA 96 | Ventilation Control and Fire Protection of Commercial Cooking Operations |
| NFPA 99 | Health Care Facilities Code |
| NFPA 101 | Life Safety Code |
| NFPA 110 | Standards for Emergency and Standby Power Systems |
| NFPA 111 | Standard on Stored Electrical Energy Emergency and Standby Power Systems |
| NFPA 241 | Standard for Safeguarding Construction, Alteration, and Demolition Operations |
| PL 91-596 | Occupational Safety and Health Act |
| PL 94-580 | Resource Conservation and Recovery Act 1976 |
| RS MEANS | Facilities Maintenance and Repair Cost Data |
| Uniform Building Code | Electrical, Plumbing, Mechanical |
| UL 1 | Flexible Metal Conduit |
| UL 5 | Surface Metal Raceways and Fittings |
| UL 6 | Electrical Rigid Metal Conduit |
| UL 44 | Thermoset Insulated Wires and Cables |
| UL 50 | Enclosures for Electrical Equipment |
| UL 83 | Thermoplastic-Insulated Wires and Cables |
| UL 98 | Enclosed and Dead-Front Switches |
| UL 360 | Liquid-Tight Flexible Metal Conduit |
| UL 467 | Grounding and Bonding Equipment |
| UL 486A | Wire Connectors and Soldering Lugs |
| UL 506 | Specialty Transformers |
| UL 510 | Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape |
| UL 512 | Fuse holders |
| UL 514A | Metallic Outlet Boxes |
| UL 514B | Conduit, Tubing, and Cable Fittings |
| UL 514C | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| UL 797 | Electrical Metallic Tubing |
| UL 817 | Cord Sets and Power-Supply Cords |
| UL 924 | Standard for Emergency Lighting and Power Equipment |
| UL-1236 | Battery Chargers |
| UL 1660 | Liquid-Tight Flexible Nonmetallic Conduit |
| UL 1995 | Heating and Cooling Equipment |
| UL | Fire Resistance Directory, Vol 1 & 2 |
| UFC 1-200-01 | DoD Building Code |
| UFC 1-200-02 | High Performance and Sustainable Building Requirements |
| UFC 1-300-02 | Unified Facilities Guide Specifications |
| UFC 3-101-01 | Architecture |
| UFC 3-110-03 | Roofing |
| UFC 3-110-04 | Roofing Maintenance and Repair |
| UFC 3-190-06 | Protective Coatings and Paints |
| UFC 3-190-07N | Food Service Equipment Operations and Maintenance |
| UFC 3-230-01 | Water Storage, Distribution, and Transmission |
| UFC 3-230-02 | O&M: Water Supply Systems |
| UFC 3-230-03 | Water Treatment |
| UFC 3-240-01 | Wastewater Collection |
| UFC 3-240-13FN | Industrial Water Treatment Operation and Maintenance |
| UFC 3-401-01 | Mechanical Engineering |
| UFC 3-410-01 | Heating, Ventilation, and Air Conditioning |
| UFC 3-410-02 | Direct Digital Control for HVAC and Other Bldg Systems |
| UFC 3-420-01 | Plumbing Systems, with Changes 1-8 |
| UFC 3-420-02FA | Compressed Air, with Change 1 |
| UFC 3-430-01FA | Heating and Cooling Distribution Systems |
| UFC 3-430-02FA | Central Steam Boiler Plants, with Change 1 |
| UFC 3-430-07 | Inspection and Certification of Boilers and Unfired Pressure Vessels, with Changes 1-3 |
| UFC 3-430-08N | Central Heating Plants |
| UFC 3-430-11 | Boiler Control Systems |
| UFC 3-450-01 | Noise and Vibration Control |
| UFC 3-470-01 | Utility Monitoring and Control Systems (UMCS) |
| UFC 3-520-01 | Interior Electrical Systems, with Change 2 |
| UFC 3-530-01 | Interior and Exterior Lighting Systems and Controls |
| UFC 3-540-07 | Operation and Maintenance: Generators |
| UFC 3-560-01 | Electrical Safety, O&M, with Change 4 |
| UFC 3-570-02A | Cathodic Protection |
| UFC 3-570-02N | Electrical Engineering Cathodic Protection |
| UFC 3-570-06 | O&M: Cathodic Protection Systems |
| UFC 3-575-01 | Lightning and Static Electricity Protection systems |
| UFC 4-010-01 | DoD Minimum Antiterrorism Standards for Buildings |
| UFGS 01 35 26 | Governmental Safety Requirements |
| UFGS 01 45 00.00 10 | Quality Control |
E.4 Air Force Electronic Publications Library (AFEPL).
Publications cited in the PWS are current as of the date the draft PWS was prepared. Latest edition of the AFEPL shall be used as appropriate. Air Force publications and forms are available at the following site: www.e-publishing.af.mil.
E.5 Army and Navy Regulations.
For Project Work occurring on an Army or Navy installation, the respective service regulation equivalent to the Air Force regulation will govern. Army publications are available at the following site: https://armypubs.army.mil. Navy publications are available at the following site:
https://www.secnav.navy.mil/doni/publications.aspx.
Page 2 of 2 15 July 2022
File details come from the government source that posted it. Updated .