Attachment 7 - Drawing 2400m0136.pdf
PDF 395 KB Posted
- Attached to
- 704 MHZ Conditioning Box
- Solicitation number
- MB470766
- Issued by
-
Department of Energy Office of Science
About this file
This technical drawing is for an Electron-Ion Collider (EIC) component at Brookhaven National Laboratory, specifically an ESR 591 MHz FPC Lid with Brazed Fittings and Weld Fittings with a 1" tube. The drawing (2400M0136) details a precision-engineered fitting with specific dimensional tolerances and material specifications.
The Bill of Materials lists two primary components: a 1.00 OD x 0.12 wall seamless 304L stainless steel tube (Part No. 2400M0136-1) and a socket connect fitting (Part No. 51255K322) from McMaster Carr, made of 316L stainless steel. The drawing includes detailed fabrication instructions, such as breaking sharp edges at 0.010 x 45 degrees and bagging/tagging parts according to MIL-STD-130. The document is marked as controlled by U.S. Department of Commerce Export Control Administration regulations and was initially released on 03/31/25, with approvals from multiple department heads and engineers.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
C
D
4 3
2 1
A
D W G
N O
O F
S H T
ER V
C
D
CREO
ELECTRON-ION COLLIDER
SCALE:
DRAWING NUMBER:
FINISH
APPLICATION
CATEGORY
Q.A.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
USED ON DRAWING NO. QTY. PER ASS'Y.
BREAK SHARP EDGES
ANGULAR TOLERANCE �#�1�$�
DECIMAL TOLERANCES
.X �#� .030
.XX �#� .015
.XXX �#� .005
ACCORDANCE WITH
ASME Y14.5 2009
INTERPRET IN GENERAL
C
SIZE
SHEET OFWEIGHT:
UPTON, N.Y. 11973
REV.
.03 MAX. MIN. 015
BROOKHAVEN NATIONAL LABORATORY
NOTES:
E I C
( )3.55
( )1.00
HEX
1.63
( ) STK1.00
2.00
.030
.360 .600
.880
.879
.970
.969
.830
.829
( ).12
( ).970 ( ).880 ( ).830
M
REVISION APPROVALS
SUPVENGDESCHKBYDATEDESCRIPTIONECN NO.REV
-----03/31/25INITIAL RELEASE-1
ESR 591 MHZ FPC
LID, BRAZED FITTINGS
WELD FITTINGS W/ 1" TUBE
2400M0136 1/1
2400M0124
BILL OF MATERIALS
REMARKSDESCRIPTIONPART NUMBERITEM
NUMBERQTY
ASTM A269TUBE, 1.00 OD X .12 WALL SEAMLESS, 304L SST2400M0136-111
MCMASTER CARRSOCKET CONNECT FITTING, 1.00 TUBE X 1 NPT F, 316L SST51255K32221
.8
2400M0122
2400M0166 2400M0167
1 1
A3DEPARTMENT
CHAIR
SAFETY / RSC
Q.A.
DIVISION
HEAD
CEE / CME
SUPERVISOR
APPROVAL D. HOLMES 03/31/25
ENG / PHY
APPROVAL J. FITE 03/31/25
DESIGN
APPROVAL V. DEMONTE 03/31/25
CHECKED
BY
DRAWN BY L. PANJOJ 06/07/24
1. SEE BOM.
2. FABRICATE IN ACCORDANCE WITH SPECIFICATION EIC-VSG-SPC-023.
3. BREAK ALL SHARP EDGES .010 X 45�$�.
4. BAG OR TAG PART WITH DRAWING NUMBER IN ACCORDANCE WITH MIL-STD-130.
SECTION A-A
1 2
SEE DETAIL A
DETAIL A
SCALE 4/1
4X .010 X 45�$�
THIS INFORMATION IS CONTROLLED BY THE
U.S. DEPARTMENT OF COMMERCE EXPORT
CONTROL ADMINISTRATION REGULATIONS
15 CFR PARTS 730-774 AS EAR99 TECHNOLOGY
LEAK TIGHT
APPROVED R&D
ELEC APPVL IN
W
INDCHILL
| Sheet 1 |
| Views |
| FRONT |
| RIGHT |
| new_view_6 |
| left_11 |
| A |
File details come from the government source that posted it. Updated .