Attachment 5 - Drawing 2400m0134.pdf
PDF 400 KB Posted
- Attached to
- 704 MHZ Conditioning Box
- Solicitation number
- MB470766
- Issued by
-
Department of Energy Office of Science
About this file
This document is a detailed engineering drawing for an Electron-Ion Collider (EIC) component at Brookhaven National Laboratory. The technical drawing (Drawing Number 2400M0134) depicts an ESR 591 MHz FPC Brazed Half Nipple, Upper Machining assembly, specifically a half nipple for an FPC port brazed assembly. The Bill of Materials includes three key components: a blank flange made of 304L stainless steel, a pre-braze port tube made of C101000 material, and a gold and copper brazed alloy ring composed of 35% gold and 65% copper. Critical fabrication specifications include brazing the assembly in hydrogen at 1875°F per AWS-7 brazing standards, with precise dimensional tolerances and edge break requirements. The drawing is marked as controlled by U.S. Department of Commerce Export Control Administration regulations and was initially released on 03/31/25, with approvals from various department heads and technical supervisors.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
7 6 5
C
D
NOTES:
8 7 6 5
ELECTRON-ION COLLIDER
SCALE:
DRAWING NUMBER:
FINISH
APPLICATION
4 3
CATEGORY
Q.A.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
USED ON DRAWING NO. QTY. PER ASS'Y.
BREAK SHARP EDGES
ANGULAR TOLERANCE �#�1�$�
DECIMAL TOLERANCES
.X �#� .030
.XX �#� .015
.XXX �#� .005
ACCORDANCE WITH
ASME Y14.5 2009
INTERPRET IN GENERAL
D
SIZE
SHEET OFWEIGHT:
UPTON, N.Y. 11973 D
W G
N O
REV.
O F
S H T
B
ER V
4 3 2
C
D
.03 MAX. MIN. 015
CREO
BROOKHAVEN NATIONAL LABORATORYE I C
( )6.13
( )2.63
2.63
3.75
4.50
1.00
4.299 +.000 -.001
X 45�$�.03
( )1.00
( )6.13
4.300 +.001 -.000
.085 .002
.14
�x� .50.070
2.564
4.390
1.00
( )6.13
ESR 591 MHZ FPC
BRAZED HALF NIPPLE, UPPER MACHINING
HALF NIPPLE, FPC PORT BRAZED ASSY
2400M0134 A3
M
BILL OF MATERIALS
REMARKSDESCRIPTIONPART NUMBERITEM
NUMBERQTY
ASTM A276FLANGE, BLANK, 304L SST, PRE BRAZE2400M0134-111
ASTM B187TUBE, PORT PRE BRAZE, C101000 2400M0134-221
AWS-7GOLD & COPPER BRAZED ALLOY RING 35 Au/65 Cu2400M0134-332
7.9
REVISION APPROVALS
SUPVENGDESCHKBYDATEDESCRIPTIONECN NO.REV
-----03/31/25INITIAL RELEASE-1
2400M0135
1 1
1/1DEPARTMENT
CHAIR
SAFETY / RSC
Q.A.
DIVISION
HEAD
CEE / CME
SUPERVISOR
APPROVAL D. HOLMES 03/31/25
ENG / PHY
APPROVAL J. FITE 03/31/25
DESIGN
APPROVAL V. DEMONTE 03/31/25
CHECKED
BY
DRAWN BY L. PANJOJ 06/11/24
1. MATERIAL SEE BOM.
2. FABRICATE IN ACCORDANCE WITH SPECIFICATION EIC-VSG-SPC-023.
3. BRAZE ASSY IN HYDROGEN @1875�$�F PER AWS-7 BRAZING.
4. BAG OR TAG PART WITH DRAWING NUMBER IN ACCORDANCE WITH MIL-STD-130.
ITEM# 1
SECTION A-A
SEE DETAIL A
ITEM 1
DETAIL A
SCALE 2/1
.02 X 45�$�
EDGE BREAK
SECTION C-C ITEM# 2
SECTION B-B
BRAZE
SEE NOTE 2
THIS INFORMATION IS CONTROLLED BY THE
U.S. DEPARTMENT OF COMMERCE EXPORT
CONTROL ADMINISTRATION REGULATIONS
15 CFR PARTS 730-774 AS EAR99 TECHNOLOGY
ISOMETRIC VIEW
FOR REFERENCE ONLY
A
B C
APPROVED R&D
ELEC APPVL IN
W
INDCHILL
| Sheet 1 |
| Views |
| FRONT |
| new_view_5 |
| right_6 |
| A |
| new_view_9 |
| new_view_10 |
| right_11 |
| right_12 |
File details come from the government source that posted it. Updated .