Attachment 13 - Drawing 2400m0170.pdf

851 KB Posted

Attached to
704 MHZ Conditioning Box
Solicitation number
MB470766
Issued by

About this file

Written by GovTribe AI ·

This is a technical drawing for an Electron-Ion Collider (EIC) Machine Tuning assembly at Brookhaven National Laboratory, specifically a "Tune & Final Braze" component (Drawing Number 2400M0170). The assembly consists of a lid (2400M0166) and base (2400M0167) with detailed fabrication specifications for brazing and tuning. Key components include dowel pins, key locking inserts, and brazing foil material (72Ag/28Cu), with precise dimensional tolerances and assembly instructions.

The document provides comprehensive manufacturing notes, including fabrication requirements per specification EIC-VSG-SPC-023, final dimension adjustments through tuning, and post-brazing preparation steps. The assembly involves installing dowel pins, using specific brazing foil at 779°C, and adding key locking inserts. The drawing includes an isometric view, multiple technical views, and a bill of materials listing specific parts with quantities and vendor information (such as McMaster-Carr). The drawing is controlled under U.S. Department of Commerce Export Control Administration Regulations (15 CFR Parts 730-774) and is marked as EAR99 technology.

View the file

Other files

File Type Posted
Enclosure A - Draft PO 470766.PDF PDF
Attachment 2 - Drawing 2400m0128.pdf PDF
Attachment 10 - Drawing 2400m0167.pdf PDF
Attachment 6 - Drawing 2400m0135.pdf PDF
Attachment 3 - Drawing 2400m0131.pdf PDF
Attachment 14 - QA101.pdf PDF
B.1 RFQ 470766.pdf PDF
Enclosure D - Vendor ACH Authorization Form.pdf PDF
Attachment 9 - Drawing 2400m0166.pdf PDF
Attachment 8 - Drawing 2400m0139.pdf PDF
Enclosure C - Quotation Pricing Sheet.pdf PDF
Enclosure B - AMS-FORM-050 Reps and Certs.pdf PDF
Attachment 1 - Statement of Work 470766 dated 9_19_25.pdf PDF
Attachment 4 - Drawing 2400m0133.pdf PDF
Attachment 5 - Drawing 2400m0134.pdf PDF
Attachment 7 - Drawing 2400m0136.pdf PDF
Enclosure F - W8 Form (Foreign Vendors).pdf PDF
Enclosure E - W-9 Form (Domestic Vendors).pdf PDF
Attachment 12 - Drawing 2400m0169.pdf PDF
Attachment 11 - Drawing 2400m0168.pdf PDF
Show all 20

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

A

B

C

D

6 5

G

E

F

NOTES:

H

8 6 5

24 3 1

A

D W G

N O

R E V S H T

O F

C

D

2 4 3

G

E

F

H

CREO

ELECTRON-ION COLLIDER

SCALE:

DRAWING NUMBER:

FINISH

APPLICATION

CATEGORY

Q.A.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

USED ON DRAWING NO. QTY. PER ASS'Y.

BREAK SHARP EDGES

ANGULAR TOLERANCE �#�1�$�

DECIMAL TOLERANCES

.X �#� .030

.XX �#� .015

.XXX �#� .005

ACCORDANCE WITH

ASME Y14.5 2009

INTERPRET IN GENERAL

E

SIZE

SHEET OFWEIGHT:

UPTON, N.Y. 11973

REV.

.03 MAX. MIN. 015

BROOKHAVEN NATIONAL LABORATORYE I C

MACHINE TUNNING

HEIGHT

2.82

4.30

SEE NOTE 2

7.121

M

REVISION APPROVALS

SUPVENGDESCHKBYDATEDESCRIPTIONECN NO.REV

------1

ESR 704 MHZ FPC TEST

CONDITIONING BOX ASSEMBLY

FINAL BRAZING ASSY

2400M0170 1/2

BILL OF MATERIALS

REMARKSDESCRIPTIONPART NUMBERITEM

NUMBERQTY

LID, BRAZED FITTINGS2400M016611

BASE, BRAZED FITTINGS2400M016721

BRAZING BFM FOIL 72Ag/28Cu 0.003" THICK31

MCMASTER CARRPIN, DOWEL, SPIRAL VENT, .250 DIA X 1.00 LG, 18-8 SST97352A62042

MCMASTER-CARRKEY LOCKING INSERT .313-24 X .438 LG, 18-8 SST91731A07158

MCMASTER-CARRKEY LOCKING INSERT .500-13 X .625 LG, 18-8 SST91731A06164

773.4

2400M0172

1 1 A3DEPARTMENT

CHAIR

SAFETY / RSC

Q.A.

DIVISION

HEAD

CEE / CME

SUPERVISOR

APPROVAL

ENG / PHY

APPROVAL

DESIGN

APPROVAL

CHECKED

BY

DRAWN BY P-D. MALENDELE 07/25/25

1. FABRICATE IN ACCORDANCE WITH SPECIFICATION EIC-VSG-SPC-023.

2. FINAL DIMENSIONS WILL BE BASED ON TUNING OF ASSEMBLY.

VIA TRIMMING/ ADJUSTING HEIGHT OF 2400M0166.

3. ASSEMBLY 2400M0166 "LID" THEORETICAL HEIGHT DIMENSION OF IS

FOR REFERENCE PURPOSES ONLY SHOULD NOT BE THE FINAL DIMENSION AFTER TUNING.

4.THE FLATNESS OF .002 APPLYS TO ITEM #1 VIA TRIMING HEIGHT ADJUSTMENT

5. AFTER TUNING PREP FOR FINAL BRAZING

- INSTALL 2X DOWEL PINS ITEM #3 INTO BASE ASSEMBLY.

- BRAZING FOIL MATERIAL 72Ag/28Cu (BAg-8, 1435 �$�F/ 779�$�C).

- ASSEMBLE (2) HALVES TOGETHER.

6. TAG PART WITH DRAWING NUMBER IN ACCORDANCE WITH MIL-STD-130.

7. AFTER FINAL BRAZING

- INSTALL 8X .312-24 KEY LOCKING INSERTS, ITEM 5.

- INSTALL 4X .500-13 KEY LOCKING INSERTS, ITEM 6.

8. PREP FOR CLEANING SEE DRAWING 2400M0172

"TUNE & FINAL BRAZE"

SEE NOTE 4

BRAZE ALL AROUND

(INTERFACE OF UPPER TO LOWER)

SEE NOTE 7

SEE NOTE 7

4X .500-13 �x�1.63

LIFT HOLES

4X .500-13 �x�1.63

LIFT HOLES

FINAL ASSY

PIN

FINAL ASSY

PIN

TUNING/TRIMMING

PIN

TUNING/TRIMMING

PIN

THIS INFORMATION IS CONTROLLED BY THE

U.S. DEPARTMENT OF COMMERCE EXPORT

CONTROL ADMINISTRATION REGULATIONS

15 CFR PARTS 730-774 AS EAR99 TECHNOLOGY

ISOMETRIC VIEW

FOR REFERENCE ONLY

REF

APPROVED R&D

ELEC APPVL IN

W

INDCHILL

Sheet 1
Views
FRONT
RIGHT
TOP
new_view_4

File details come from the government source that posted it. Updated .