Attachment 4 - Drawing 2400m0133.pdf
PDF 419 KB Posted
- Attached to
- 704 MHZ Conditioning Box
- Solicitation number
- MB470766
- Issued by
-
Department of Energy Office of Science
About this file
This document is a detailed technical drawing for an Electron-Ion Collider (EIC) component at Brookhaven National Laboratory. The drawing (number 2400M0133) specifies an ESR 591 MHz FPC Base with Brazed Fittings, designed to weld a 4.5" CF flange with a 2.5" tube. The Bill of Materials includes two primary components: a 2.5 OD x .12 wall seamless 304L SST tube (ASTM A269) and a CF flange (4.50 x 2.50 ID, NR, 304L SST from Kurt J. Lesker). The drawing provides precise dimensional tolerances, manufacturing specifications, and notes for fabrication, including requirements to break sharp edges, vibro-etch the part with the drawing number, and ensure vacuum tightness. The document is marked as controlled by U.S. Department of Commerce Export Control Administration Regulations and was initially released on 03/31/25, with approvals from various departmental heads at Brookhaven National Laboratory.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
C
D
4 3
2 1
A
D W G
N O
O F
S H T
ER V
C
D
CREO
ELECTRON-ION COLLIDER
SCALE:
DRAWING NUMBER:
FINISH
APPLICATION
CATEGORY
Q.A.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
USED ON DRAWING NO. QTY. PER ASS'Y.
BREAK SHARP EDGES
ANGULAR TOLERANCE �#�1�$�
DECIMAL TOLERANCES
.X �#� .030
.XX �#� .015
.XXX �#� .005
ACCORDANCE WITH
ASME Y14.5 2009
INTERPRET IN GENERAL
C
SIZE
SHEET OFWEIGHT:
UPTON, N.Y. 11973
REV.
.03 MAX. MIN. 015
BROOKHAVEN NATIONAL LABORATORY
NOTES:
E I C
C�b�D
2.500 2.499
( ).68
3.875
2.410 2.409
.045 +.005 -.000
.530 +.010 -.000
D
( ).045
2.320 2.315
1.0
C
QUALIFY
2.5" OD SURFACE
1.0
( )4.47
ITEM # 1
3.500
M
REVISION APPROVALS
SUPVENGDESCHKBYDATEDESCRIPTIONECN NO.REV
-----03/31/25INITIAL RELEASE-1
ESR 591 MHZ FPC
BASE, BRAZED FITTINGS
WELD 4.5" CF W/ 2.5" TUBE MACHINE
2400M0133 1/1
2400M0167
BILL OF MATERIALS
REMARKSDESCRIPTIONPART NUMBERITEM
NUMBERQTY
ASTM A269TUBE, 2.5 OD X .12 WALL SEAMLESS, 304L SST2400M0133-111
KURT J. LESKERFLANGE, CF, 4.50 X 2.50 ID, NR, 304L SSTF0450X250N21
2.7
2400M0124
1 1
A3DEPARTMENT
CHAIR
SAFETY / RSC
Q.A.
DIVISION
HEAD
CEE / CME
SUPERVISOR
APPROVAL D. HOLMES 03/31/25
ENG / PHY
APPROVAL J. FITE 03/31/25
DESIGN
APPROVAL V. DEMONTE 03/31/25
CHECKED
BY
DRAWN BY L. PANJOJ 06/07/24
1. MATERIAL SEE BOM.
2. FABRICATE IN ACCORDANCE WITH SPECIFICATION EIC-VSG-SPC-023.
3. BREAK ALL SHARP EDGES .010 X 45�$�
4. VIBRO-ETCH PART WITH DRAWING NUMBER WITH MIN .12 HIGH CHARACTERS
IN ACCORDANCE WITH MIL-STD-130, LOCATE APPROX AS SHOWN.
5. BAG OR TAG PART WITH DRAWING NUMBER IN ACCORDANCE WITH MIL-STD-130.
SEE DETAIL A
2400M0133
SEE NOTE 4
DETAIL A
SCALE 4/1
3X .010 X 45�$�
THIS INFORMATION IS CONTROLLED BY THE
U.S. DEPARTMENT OF COMMERCE EXPORT
CONTROL ADMINISTRATION REGULATIONS
15 CFR PARTS 730-774 AS EAR99 TECHNOLOGY
VACUUM TIGHT
ISOMETRIC VIEW
FOR REFERENCE ONLY
A
APPROVED R&D
ELEC APPVL IN
W
INDCHILL
| Sheet 1 |
| Views |
| FRONT |
| RIGHT |
| new_view_6 |
| A |
File details come from the government source that posted it. Updated .