Attachment_5_-_BEPA_Pre-alt_Hazardous_Materials_Survey_Report.pdf

Pre-alteration Hazardous Materials Survey

Belmont-Paul Women’s Equality

National Monument

Ms. Mary Billings

Alpha Corporation 1850 South Louden Street, Suite 200 Winchester, Virginia 22601

August 30, 2017

Pre-alteration Hazardous Materials Survey

Belmont-Paul Women’s Equality National Monument i

EXECUTIVE SUMMARY

Arc Environmental, LLC performed a limited pre-alteration survey at Belmont-Paul Women’s Equality

National Monument located at 144 Constitution Avenue, N.E. in Washington, D.C. (Site) to evaluate building materials likely to be impacted by the planned renovation and/or demolition activities. The survey included the assessment and sampling of suspect asbestos-containing materials (ACMs) and lead-based paint (LBP) and a visual survey for universal and regulated wastes. The survey was performed on

July 24, 2017.

During the survey, a total of 57 bulk samples were collected from 18 suspect homogenous areas identified within the renovation area. Based on the findings of the asbestos survey, one (1) of the sampled homogeneous materials was confirmed by laboratory analysis to be an asbestos-containing material. The identified ACM is beige sink undercoating insulation. Section 2.0 provides additional details regarding the findings of the asbestos survey.

The lead-based paint screening was conducted at the Site using a portable X-ray Fluorescence (XRF) device. On-site testing revealed the presence of lead-based paint on several building components and/or surfaces including wooden door, wooden door jamb, wooden door casing, wooden window sill, wooden window casing, wooden closet door, wooden closet door casing, wooden closet shelf, wooden shelf support, wooden baseboard, wooden fireplace mantel, plaster walls and ceiling, ceramic tub, ceramic sink, brick fireplace and brick wall. The lead screening is not a comprehensive, surface-by-surface testing application and is intended to provide representative testing of similar building componenets. Section 3.0 provides details regarding the LBP survey.

A visual survey and inventory of potential universal and regulated wastes was performed as part of the survey. Noted potentially regulated wastes include mercury vapor-containing tubes, ballasts, fire extinguishers, battery-operated emergency exit lights, and battery-operated exit signs. Section 4.0 provides details regarding the universal and regulated waste survey.

Reviewed by:

Stacy Kahatapitiya, CHMM

Director of Industrial Hygiene Services ii

Table of Contents

1.0 Introduction

2.0 Asbestos-Containing Materials Survey

2.1 Methodology

2.2 Findings and Recommendations

3.0 Lead-Based Paint Screening

3.1 Methodology

3.2 Results

3.3 Conclusions and Recommendations

4.0 Universal Wastes

4.1 Mercury

4.2 Polychlorinated Biphenyls

4.3 Other Potentially Regulated and Hazardous Wastes

Appendix A Asbestos Bulk Sampling Results & Laboratory Accreditations

Appendix B Summary of Materials Tested for Asbestos

Appendix C Inspectors’ Accreditations

Appendix D Site Drawing

Appendix E Lead-based Paint Data Sheets

Appendix F Photographic Log

1.0 Introduction

Arc Environmental, LLC (Arc Environmental) was retained by Alpha Corporation to perform a limited pre-alteration survey for asbestos-containing materials and lead-based paint at Belmont-Paul Women’s

Equality National Monument located at 144 Constitution Avenue, N.E., in Washington, D.C. The inspection included the assessment and sampling of suspect, accessible asbestos-containing materials

(ACMs), representative testing of painted/coated building components to identify lead-based paint (LBP), and a visual survey for universal and regulated wastes. The survey was conducted by Arc Environmental

July 24, 2017. The findings of the survey are presented in this report.

2.0 Asbestos-Containing Materials Survey

2.1 Methodology

The asbestos survey was performed by U.S. Environmental Protection Agency (USEPA)-trained asbestos inspector, Mr. Josh Floyd. A copy of the inspector’s training certificate is included in Appendix C. The asbestos survey included the identification, assessment, and sampling of suspect asbestos-containing materials. The survey was conducted under protocols established by the Environmental Protection

Agency (EPA) 40 Code of Federal Regulations (CFR) 763 Asbestos Hazard Emergency Response Act

(AHERA) and 40 CFR 61 Subpart M, National Emission Standards for Hazardous Air Pollutants

(NESHAP), as applicable. Destructive assessment methods were not performed as part of this survey.

Every reasonable attempt was made to locate suspect asbestos-containing materials (ACMs) present as thermal system insulation (TSI), surfacing material, or other miscellaneous materials. Specifically, Arc

Environmental employed the following protocols while performing the survey: flooring materials were penetrated to the subfloor to determine how many layers of flooring were present; wall systems and ceiling systems were evaluated to identify suspect building materials associated with the systems themselves, as well as any accessible cavities; and mechanical insulation systems were evaluated to identify potential suspect insulation beneath jackets and wraps.

During the survey, Arc Environmental collected a total of 57 bulk samples from 18 suspect homogeneous areas identified throughout the accessible portions of the Site. The bulk samples of suspect ACMs were submitted, along with the corresponding chain-of-custody forms to EMSL Analytical, Inc. (EMSL) to determine the presence of asbestos in the sampled materials. EMSL is accredited for asbestos analysis in bulk materials through the National Voluntary Laboratory Accreditation Program (NVLAP). A copy of the respective laboratory’s NVLAP accreditation is included with the corresponding analytical data report in Appendix A.

The bulk samples were analyzed using polarized light microscopy (PLM/Dispersion Staining following the EPA method 600/ R-93/116, July 1993, Method for the Determination of Asbestos in Bulk Building

Materials). Based on the USEPA’s definition, a material which contains greater than one percent (1%) asbestos, as determined using the methods specified in Appendix E, Subpart E, 40 CFR Part 763, Section

1, Polarized Light Microscopy (PLM), is considered an ACM and must be handled according to OSHA, USEPA, and Department of Energy and Enviroment (DOEE) regulations if disturbed. Materials containing less than 1% asbestos are regulated under OSHA to ensure worker safety during the disturbance, handling, and disposal of asbestos-contaminated materials.

The findings and quantities of verified ACM are summarized in Table 1, Identified Asbestos-containing

Materials.

2.2 Findings and Recommendations

Laboratory analysis of the 58 bulk samples collected from the identified suspect materials confirmed that one (1) of the materials are asbestos-containing under USEPA regulations. A complete list of the suspect materials sampled during this survey is presented in Appendix B.

The beige sink undercoating is classified by the USEPA as Category II Non-friable materials. Category II non-friable materials are regulated if they have a high probability of becoming or have become crumbled, pulverized, or reduced to powder by the forces expected to impact the materials during the course of demolition or renovation activities. If these materials are to remain in place, and will not be altered during renovation activities, the materials can be managed in place. If these materials will be impacted by planned Site activities, they must be removed by a licensed asbestos abatement contractor prior to disturbance, unless otherwise specified below.

The identified ACMs should be removed from the Site prior to renovations which may disturb the identified materials. All abatement actions should be performed by personnel trained in accordance with

USEPA, OSHA, and DOEE requirements for asbestos-related activities. In addition, a licensed asbestos consultant should be retained to conduct oversight and air-monitoring during any abatement activities.

Due to some areas being inaccessible (e.g., wall chases), it is recommended that if the building is to be renovated or altered in anyway, all materials not identified in this report which may be uncovered during demolition be assumed to contain asbestos or sampled and analyzed for asbestos content to determine if they are ACMs.

3.0 Lead-Based Paint Screening

3.1 Methodology

Painted surfaces within the project area were visually inspected to determine their condition. A lead screening survey was conducted using an X-ray Fluorescence (XRF) Spectrum Analyzer on painted building surfaces and/or components. Surfaces that are intact or non-deteriorated condition (as defined by the U.S. Department of Housing and Urban Development Guidelines) do not pose an immediate health risk, regardless of the lead content. Leaded paint in poor condition is a priority lead-hazard and should be promptly addressed using approved Lead Safe Work Practices.

Mr. Derek Kwon, DOEE-licensed Lead Risk Assessor, performed the lead screening at the Site. A copy of Mr. Kwon’s accreditation is included in Appendix C. The testing included 296 XRF readings along with six calibration checks to ensure that the instrument is within acceptable calibration parameters.

Lead-based paint, when tested via XRF, is defined by the U.S. Department of Housing and Urban

Table 1: Identified Asbestos-containing Materials

HA Description Location

Quantity

SI1 Beige Sink Undercoating Room 21, 3rd Floor Kitchen 2 EA

Development (HUD) and District of Columbia as paint having lead concentration equal to or in excess of

1.0 milligrams per square centimeter (mg/cm ). The results of the lead-based paint survey are summarized in the XRF Lead-based Paint Inspection Data Sheets included in Appendix E.

3.2 Results

Of the 299 field tests, 200 of the XRF readings obtained from surfaces and coatings at the Site were found to contain lead concentration above the District of Columbia threshold of (>1.0 mg/cm2) for lead-based paint. Some of the remaining painted surfaces tested are considered to be lead-containing paint by definition (greater than 0.0 mg/cm2 but less than 1.0 mg/cm2). All of the XRF readings are detailed on the “XRF Lead-Based Paint Testing Data Sheets” attached to this report and are given in mg/cm2. On the

XRF data sheets, components described with a wall code of "A" are located on the closest wall with the same orientation as the front of the building. Components within each room are then assigned a letter B, C, or D in a clockwise manner based on the location of wall A.

3.3 Conclusions and Recommendations

Two hundred (200) of the tested surfaces and coatings from the building were determined to be affected with lead-based paint. Components identified to be affected with lead-based paint or lead-based coatings include: wooden doors, wooden door jambs, wooden door casings, wooden window sills, wooden window casings, wooden closet doors, wooden closet door casings, wooden closet shelfs, wooden shelf supports, wooden baseboards, wooden fireplace mantels, plaster walls, plaster ceiling, ceramic tub, ceramic sink, brick fireplaces, and brick walls.

All work performed at the Site which may impact lead-based paint should be performed in accordance with OSHA regulation 29 CFR 1926.62 (Lead in Construction). Lead-based paint can be managed in place and is not required to be abated; however, these surfaces should be maintained in good (non-deteriorated) condition to minimize the potential for lead dust to be generated.

The OSHA Lead in Construction standard applies to all construction work where an employee may be occupationally exposed to lead. This standard does not indicate a specific percentage or mass per area

(mg/cm2) of lead in paint that is permissible during construction/demolition activities. There is no acceptable concentration for lead under the OSHA lead standard that eliminates the requirement for contractors to comply with this regulation. Due to lead-based and lead-containing paint (paint containing detectable levels of lead but having concentrations below the lead-based paint threshold) associated with the Site, OSHA worker protection requirements for lead must be followed during renovation and/or demolition activities.

Building renovation and/or demolition activities have the potential to produce hazardous waste if lead-based paint is dry scraped, dry sanded, or heated. All renovation activities must incorporate lead Toxicity

Characteristic Leaching Procedure (TCLP) testing of the construction debris prior to its disposal in accordance with the Resource Conservation and Recovery Act (RCRA). The hazardous waste criteria for lead waste is established under RCRA, Subtitle C, as 5.0 milligrams per liter (mg/L) measured with the

TCLP as listed in CFR 40 Part 261. A representative sample of anticipated or generated waste stream

(i.e., demolition debris) should be collected for purposes of TCLP testing to determine disposal options.

The lead-based paint debris generated during demolition should be handled in accordance with all applicable Federal and District of Columbia regulations.

4.0 Universal Wastes

Arc Environmental conducted a visual inspection for Universal Wastes (UWs) and other potentially regulated and hazardous wastes within the project area. As per 40 Code of Federal Regulations (CFR) 261

Subpart C, UWs include any of the following six wastes that have at least one hazardous characteristic:

batteries, pesticides, thermostats, cathode ray tubes, mercury-containing devices, and mercury-containing lamps (e.g., fluorescent tubes and high intensity discharge lamps). These wastes require proper handling and disposal methods when no longer in use or prior to completing any planned demolition activities. All identified Universal and potentially regulated wastes must be handled, transported, and disposed of in accordance with applicable regulations prior to the renovation of the Site.

4.1 Mercury

Arc Environmental observed 19 fluorescent tubes and four (4) emergency lighting systems within the interiors of the Site. The light tubes are assumed to contain mercury vapor. Batteries associated with the emergency lighting systems can contain heavy metals which include mercury. Mercury-containing light tubes and batteries associated with emergency lights will require proper removal and disposal in accordance with USEPA regulations listed in 40 CFR Part 273.

4.2 Polychlorinated Biphenyls

A visual inspection was conducted for potential PCB-containing equipment and fixtures. Light fixtures were visually assessed to determine the presence of PCB-containing ballasts. While no PCB labels were observed, all light ballasts are likely to contain other regulated fluids that will require proper removal and disposal. Arc Environmental recommends removal, segregation by type, and proper disposal of all identified ballasts. There are approximately three (3) suspect ballasts associated with light fixtures in the project area.

4.3 Other Potentially Regulated and Hazardous Wastes

Other potentially regulated and hazardous wastes that are not considered UWs were identified at the Site.

Although not considered UWs, these identified wastes will need to be removed and disposed of prior to any demolition activities due the potential for release incidents impacting the environment. The following other potentially regulated and hazardous wastes were identified at the Site:

Exit signs; and

Dry chemical fire extinguishers.

The fire extinguishers will need to be discharged/de-pressurized prior to disposal. The battery operated exit signs (which house batteries likely containing heavy metals) will require proper handling, removal, and disposal methods prior to any planned alterations within the project area.

Appendix A

Asbestos Bulk Sampling Results & Laboratory Accreditations

EMSL Analytical, Inc.

10768 Baltimore Avenue Beltsville, MD 20705

Tel/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com / beltsvillelab@emsl.com

191708581EMSL Order:

Customer ID: ARCE78

Customer PO:

Project ID:

Attention: Phone:Josh Floyd (410) 365-6457

Fax:Arc Environmental (410) 962-1065

Received Date:1311 Haubert Street 07/25/2017 11:50 AM

Analysis Date:Baltimore, MD 21230 07/28/2017

Collected Date: 07/25/2017

Project: BELMONT - PAUL

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized

Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

191708581-0001

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

White

Non-Fibrous

Homogeneous

WHITE EXT

WINDOW CAULK

191708581-0002

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

White

Non-Fibrous

Homogeneous

WHITE EXT

WINDOW CAULK

191708581-0003

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

White

Non-Fibrous

Homogeneous

WHITE EXT

WINDOW CAULK

04-Joint Compound

191708581-0004

None DetectedMica

Non-fibrous (Other)

12%

88%

White

Non-Fibrous

Homogeneous

WALL PLSTR

04-Skim Coat

191708581-0004A

None DetectedQuartz

Perlite

Non-fibrous (Other)

15%

40%

40%

Cellulose5%White

Non-Fibrous

Homogeneous

WALL PLSTR

04-Rough Coat

191708581-0004B

None DetectedQuartz

Perlite

Non-fibrous (Other)

30%

40%

30%

Gray/Various

Non-Fibrous

Homogeneous

WALL PLSTR

05-Skim Coat

191708581-0005

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

WALL PLSTR

05-Rough Coat

191708581-0005A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Tan/Various

Fibrous

Homogeneous

WALL PLSTR

06-Skim Coat

191708581-0006

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

WALL PLSTR

06-Rough Coat

191708581-0006A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Tan/Various

Fibrous

Homogeneous

WALL PLSTR

07-Skim Coat

191708581-0007

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

WALL PLSTR

07-Rough Coat

191708581-0007A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Tan/Various

Fibrous

Homogeneous

WALL PLSTR

08-Skim Coat

191708581-0008

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

WALL PLSTR

08-Rough Coat

191708581-0008A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Tan/Various

Fibrous

Homogeneous

WALL PLSTR

09-Skim Coat

191708581-0009

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

WALL PLSTR

09-Rough Coat

191708581-0009A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Tan/Various

Fibrous

Homogeneous

WALL PLSTR

Initial report from: 07/31/2017 09:44:29

Page 1 of 5ASB_PLM_0008_0001 - 1.78 Printed: 7/31/2017 9:44 AM

Tel/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com / beltsvillelab@emsl.com

191708581EMSL Order:

Customer ID: ARCE78

Customer PO:

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized

Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

10-Skim Coat

191708581-0010

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

10%

45%

45%

White

Non-Fibrous

Homogeneous

WALL PLSTR

10-Rough Coat

191708581-0010A

None DetectedQuartz

Non-fibrous (Other)

60%

35%

Cellulose5%Brown/Various

Fibrous

Homogeneous

WALL PLSTR

11-Skim Coat

191708581-0011

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

11-Rough Coat

191708581-0011A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Brown/Various

Fibrous

Homogeneous

CEIL PLSTR

12-Skim Coat

191708581-0012

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

12-Rough Coat

191708581-0012A

None DetectedQuartz

Non-fibrous (Other)

60%

25%

Cellulose

Hair

5%

10%

Brown/Tan/Various

Fibrous

Homogeneous

CEIL PLSTR

13-Skim Coat

191708581-0013

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

13-Rough Coat

191708581-0013A

None DetectedQuartz

Non-fibrous (Other)

60%

28%

Cellulose

Hair

5%

7%

Brown/Tan/Various

Fibrous

Homogeneous

CEIL PLSTR

14-Skim Coat

191708581-0014

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

14-Rough Coat

191708581-0014A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Brown/Tan/Various

Fibrous

Homogeneous

CEIL PLSTR

15-Skim Coat

191708581-0015

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

15-Rough Coat

191708581-0015A

None DetectedQuartz

Non-fibrous (Other)

60%

30%

Cellulose

Hair

5%

5%

Brown/Various

Fibrous

Homogeneous

CEIL PLSTR

16-Joint Compound

191708581-0016

None DetectedMica

Non-fibrous (Other)

12%

88%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

16-Drywall

191708581-0016A

None DetectedGypsum

Non-fibrous (Other)

70%

25%

Cellulose5%Gray

Fibrous

Homogeneous

CEIL PLSTR

17-Skim Coat

191708581-0017

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

5%

45%

50%

White

Non-Fibrous

Homogeneous

CEIL PLSTR

17-Rough Coat

191708581-0017A

None DetectedQuartz

Non-fibrous (Other)

60%

28%

Cellulose

Hair

5%

7%

Brown/Tan

Fibrous

Homogeneous

CEIL PLSTR

191708581-0018

None DetectedCa Carbonate

Non-fibrous (Other)

35%

35%

Cellulose30%Gray/White/Black

Fibrous

Heterogeneous

WHITE W/ BLK

SQUARES LINO

19-Linoleum

191708581-0019

None DetectedCa Carbonate

Non-fibrous (Other)

35%

35%

Cellulose30%Gray/White/Various

Fibrous

Heterogeneous

WHITE W/ BLK

SQUARES LINO

19-Mastic

191708581-0019A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

WHITE W/ BLK

SQUARES LINO

Page 2 of 5ASB_PLM_0008_0001 - 1.78 Printed: 7/31/2017 9:44 AM

Tel/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com / beltsvillelab@emsl.com

191708581EMSL Order:

Customer ID: ARCE78

Customer PO:

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized

Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

20-Linoleum

191708581-0020

None DetectedCa Carbonate

Non-fibrous (Other)

35%

35%

Cellulose30%Gray/White/Black

Fibrous

Heterogeneous

WHITE W/ BLK

SQUARES LINO

20-Mastic

191708581-0020A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

WHITE W/ BLK

SQUARES LINO

191708581-0021

None DetectedCa Carbonate

Non-fibrous (Other)

30%

70%

White/Yellow

Non-Fibrous

Heterogeneous

CERAMIC TILE

BACKING

191708581-0022

None DetectedQuartz

Non-fibrous (Other)

5%

85%

Cellulose10%Brown/Yellow

Fibrous

Heterogeneous

CERAMIC TILE

BACKING

191708581-0023

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

CERAMIC TILE

BACKING

24-Wallpaper

191708581-0024

None DetectedNon-fibrous (Other)15%Cellulose85%White/Various

Fibrous

Heterogeneous

WALLPAPER &

GLUE

24-Glue

191708581-0024A

None DetectedCa Carbonate

Non-fibrous (Other)

40%

60%

White/Yellow

Non-Fibrous

Heterogeneous

WALLPAPER &

GLUE

25-Wallpaper

191708581-0025

None DetectedNon-fibrous (Other)15%Cellulose85%White/Various

Fibrous

Heterogeneous

WALLPAPER &

GLUE

25-Glue

191708581-0025A

None DetectedCa Carbonate

Non-fibrous (Other)

35%

65%

White/Various/Yello w

Non-Fibrous

Heterogeneous

WALLPAPER &

GLUE

26-Wallpaper

191708581-0026

None DetectedNon-fibrous (Other)15%Cellulose85%White/Various

Fibrous

Heterogeneous

WALLPAPER &

GLUE

26-Glue

191708581-0026A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

WALLPAPER &

GLUE

191708581-0027

7% ChrysotileQuartz

Ca Carbonate

Non-fibrous (Other)

10%

45%

38%

Gray/White

Non-Fibrous

Homogeneous

SINK

UNDERCOATING

191708581-0028

7% ChrysotileQuartz

Ca Carbonate

Non-fibrous (Other)

10%

45%

38%

Gray/White

Non-Fibrous

Homogeneous

SINK

UNDERCOATING

191708581-0029

None DetectedGypsum

Non-fibrous (Other)

65%

25%

Cellulose10%Brown/Gray

Fibrous

Heterogeneous

DRYWALL

191708581-0030

None DetectedGypsum

Non-fibrous (Other)

65%

25%

Cellulose10%Brown/Gray

Fibrous

Heterogeneous

DRYWALL

191708581-0031

None DetectedGypsum

Non-fibrous (Other)

65%

25%

Cellulose10%Brown/Gray

Fibrous

Heterogeneous

DRYWALL

191708581-0032

None DetectedMica

Non-fibrous (Other)

12%

83%

Cellulose5%Brown/Tan/White

Fibrous

Heterogeneous

JOINT CMPD

191708581-0033

None DetectedMica

Non-fibrous (Other)

15%

78%

Cellulose7%Brown/Tan/White

Fibrous

Heterogeneous

JOINT CMPD

Page 3 of 5ASB_PLM_0008_0001 - 1.78 Printed: 7/31/2017 9:44 AM

Tel/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com / beltsvillelab@emsl.com

191708581EMSL Order:

Customer ID: ARCE78

Customer PO:

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized

Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

191708581-0034

None DetectedMica

Non-fibrous (Other)

12%

83%

Cellulose5%Brown/Tan/White

Fibrous

Heterogeneous

JOINT CMPD

191708581-0035

None DetectedPerlite

Non-fibrous (Other)

30%

10%

Cellulose

Min. Wool

30%

30%

Gray/White

Fibrous

Heterogeneous

2X2 TEXTURED CT

191708581-0036

None DetectedPerlite

Non-fibrous (Other)

30%

10%

Cellulose

Min. Wool

30%

30%

Gray/White

Fibrous

Heterogeneous

2X2 TEXTURED CT

191708581-0037

None DetectedPerlite

Non-fibrous (Other)

30%

10%

Cellulose

Min. Wool

30%

30%

Gray/White

Fibrous

Heterogeneous

2X2 TEXTURED CT

38-Floor Tile

191708581-0038

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

38-Mastic

191708581-0038A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

39-Floor Tile

191708581-0039

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

39-Mastic

191708581-0039A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

40-Floor Tile

191708581-0040

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

40-Mastic

191708581-0040A

None DetectedNon-fibrous (Other)100%Yellow

Non-Fibrous

Homogeneous

12X12 LT GRAY W/

DK GRAY & WHITE

& MSTC

41-Cove Base

191708581-0041

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Brown

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

41-Mastic

191708581-0041A

None DetectedNon-fibrous (Other)100%Tan

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

42-Cove Base

191708581-0042

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Brown

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

42-Mastic

191708581-0042A

None DetectedNon-fibrous (Other)100%Tan

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

43-Cove Base

191708581-0043

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Brown

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

43-Mastic

191708581-0043A

None DetectedNon-fibrous (Other)100%Tan

Non-Fibrous

Homogeneous

4" DK BRN COVE

BASE & MSTC

191708581-0044

None DetectedCa Carbonate

Non-fibrous (Other)

35%

45%

Cellulose

Glass

10%

10%

White

Non-Fibrous

Homogeneous

WHITE PIPE MSTC

191708581-0045

None DetectedCa Carbonate

Non-fibrous (Other)

35%

45%

Cellulose

Glass

10%

10%

White

Non-Fibrous

Homogeneous

WHITE PIPE MSTC

191708581-0046

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

50%

30%

20%

Gray/Various

Non-Fibrous

Homogeneous

CEMENTITIOUS

MATERIAL

Page 4 of 5ASB_PLM_0008_0001 - 1.78 Printed: 7/31/2017 9:44 AM

Tel/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com / beltsvillelab@emsl.com

191708581EMSL Order:

Customer ID: ARCE78

Customer PO:

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized

Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

191708581-0047

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

55%

35%

10%

Gray/Various

Non-Fibrous

Homogeneous

CEMENTITIOUS

MATERIAL

48-Cove Base

191708581-0048

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

48-Mastic

191708581-0048A

None DetectedNon-fibrous (Other)100%Various/Clear

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

49-Cove Base

191708581-0049

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

49-Mastic

191708581-0049A

None DetectedNon-fibrous (Other)100%Gray/Various/Clear

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

50-Cove Base

191708581-0050

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Gray

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

50-Mastic

191708581-0050A

None DetectedNon-fibrous (Other)100%Gray/Various/Clear

Non-Fibrous

Homogeneous

4" GRAY COVE

BASE & MSTC

191708581-0051

None DetectedGypsum

Non-fibrous (Other)

70%

15%

Cellulose15%Brown/Gray/Various

Fibrous

Heterogeneous

CEMENTITIOUS

BOARD BEHIND PL1

191708581-0052

None DetectedGypsum

Non-fibrous (Other)

70%

15%

Cellulose15%Brown/Gray/Various

Fibrous

Heterogeneous

CEMENTITIOUS

BOARD BEHIND PL1

191708581-0053

None DetectedGypsum

Non-fibrous (Other)

70%

15%

Cellulose15%Brown/Gray/Various

Fibrous

Heterogeneous

CEMENTITIOUS

BOARD BEHIND PL1

191708581-0054

None DetectedQuartz

Perlite

Non-fibrous (Other)

5%

15%

5%

Min. Wool75%Gray/Various/Black

Fibrous

Homogeneous

WOOL MATERIAL

191708581-0055

None DetectedQuartz

Perlite

Non-fibrous (Other)

5%

15%

5%

Min. Wool75%Gray/Various/Black

Fibrous

Homogeneous

WOOL MATERIAL

191708581-0056

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

10%

15%

55%

Cellulose20%Brown/Black/Green

Fibrous

Heterogeneous

BLK MSTC

191708581-0057

None DetectedCa Carbonate

Non-fibrous (Other)

25%

75%

Various/Black

Non-Fibrous

Heterogeneous

BLK MSTC

Analyst(s)

William Chrobak (86) Joe Centifonti, Laboratory Manager or Other Approved Signatory

EMSL maintains liability limited to cost of analysis . This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government . Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Estimated accuracy, precision and uncertainty data available upon request. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Reporting limit is 1%

Samples analyzed by EMSL Analytical, Inc. Beltsville, MD NVLAP Lab Code 200293-0

Page 5 of 5ASB_PLM_0008_0001 - 1.78 Printed: 7/31/2017 9:44 AM

OrderID: 191708581

OrderID: 191708581

Appendix B

Summary of Materials Tested for Asbestos

Summary of Sampled Suspect Asbestos-containing Materials

Belmont-Paul Women’s Equality National Monument – Washington, D.C.

HA Material Description Sample Number Result

WC1 White Exterior Window Glazing 01, 02, 03 NAD

PL1 Plaster Wall 04, 05, 06, 07, 08, 09, 10

NAD

PL2 Plaster Ceiling 11, 12, 13, 14, 15, 16, 17

NAD

LN1 White Linoleum with Black Squares 18, 19, 20 NAD

TB1 Ceramic Tile Backing 21, 22, 23 NAD

WPG1 Wallpaper Glue 24, 25, 26 NAD

SI1 Beige Sink Undercoating 27, 28 7% Chrysotile

DW1 Drywall and Joint Compound 29, 30, 31 NAD

JC1 Joint Compound associated with DW1 32, 33, 34 NAD

CT1 2’x2’ Textured Ceiling Tile 35, 36, 37 NAD

FT1

12”x12” Light Grey Floor Tile with Dark

Grey Design and associated Mastic

38, 39, 40 NAD

CB1

4” Dark Brown Cove Base and associated

Mastic

41, 42, 43 NAD

PM1 White Pipe Mastic 44, 45 NAD

CM1

Cementitous Material around Boiler

Exhaust

46, 47 NAD

CB2 4” Grey Cove Base and associated Mastic 48, 49, 50 NAD

CM2 Cementitous Board behind plaster wall 51, 52, 53 NAD

TSI1 Wool like Insulation 54, 55 NAD

BM1 Black Wall Mastic 56, 57 NAD

Notes:

1) Materials in bold face print are Asbestos-Containing Materials (greater than 1% asbestos)

2) NAD = No Asbestos Detected

Appendix C Inspectors’ Accreditations

ATC GROUP SERVICES, LLC

9231 RUMSEY ROAD COLUMBIA, MD 21045 (410) 381-0232

CERTIFICATE OF ACHIEVEMENT

AWARDED TO

JOSH FLOYD

IN RECOGNITION OF SUCCESSFUL COMPLETION OF THE COURSE

ASBESTOS INSPECTOR/

MANAGEMENT PLANNER REVIEW

AN 8-HOUR ANNUAL REVIEW PROGRAM OF STUDY PRESENTED IN ACCORDANCE WITH

THE PROVISIONS OF THE U.S. ENVIRONMENTAL PROTECTION AGENCY MODEL

ACCREDITATION PLAN, 40 CFR PART 763, APPENDIX C TO SUBPART E,

FOR ACCREDITATION UNDER TSCA TITLE II.

PRESENTED BY A-t-_ ~ttt-

16-0599 ATC ·' / -

CERTIFICATE# COURSE DIRECTOR

GROUP SERVICES LLC

CLAYTON E. MILLER

October 5, 2016 October 5, 2016 Octoberber 5, 2017

COURSE DATE EXAMINATION DATE EXPIRATION DATE

I

GOVERNMENT OF THE DISTRICT OF COLUMBIA 00857

DEPARTMENT OF ENERGY & ENVIRONMENT * * *

11..10 \.;nl£F.lLnIYHOLSr.-:GOl\1~1C.

n l\lPII.I.:,n X:;r)[~T R\'[\lfXI HiL\.,>;Ur

NAME: Han Kwon CLASS CODE: Risk As~essor

EXPIRAnON DATE: 2-15-2019

CARD NUMBER: DC17-7453

TommyWcUs Director

Appendix D Site Drawing jfloyd Typewritten Text Legend ACM Sink Undercoating jfloyd Typewritten Text jfloyd Typewritten Text jfloyd Oval

Oval

Typewritten Text Legend ACM Sink Undercoating jfloyd Oval

Oval

Appendix E

Lead-based Paint Data Sheets

Appendix F

Photographic Log

Lead-based paint on wood ceiling

Belmont Paul Women’s Equality National Monument

144 Constitution Avenue, N.E.

1311 Haubert Street, Baltimore, Maryland 21230 | P 410. 659.9971 F 410.962.1065

Date Site Surveyed:

July 24, 2017

Lead-based paint on wood door components and plaster walls

Lead-based paint on fire place mantel and trim Lead-based paint on wood door components, fireplace components, baseboards, and plaster walls.

Lead-based paint on exterior wood window components – deteriorated

Belmont Paul Women’s Equality National Monument

144 Constitution Avenue, N.E.

1311 Haubert Street, Baltimore, Maryland 21230 | P 410. 659.9971 F 410.962.1065

Date Site Surveyed:

July 24, 2017

Lead-based paint on ceiling plaster – deteriorated Lead-based paint on wood door components, fireplace components, and plaster walls.

Lead-based paint on interior window components