Attachment 3 Consolidated List of References - 70Z08526LREP0005.pdf

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein.

Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing Naval Engineering Division, Rev -, FL-1702-11, Inspection of Sheaves

Coast Guard Drawing 400 WAGB 0103-030, Rev C, General Arrangement Modifications

Incidental to Fwd Crane Replacement

Coast Guard Drawing 400 WAGB 103-003, Rev AM, Booklet of General Plans (POLAR STAR)

Coast Guard Drawing 400 WAGB 103-003, Rev AK, Booklet of General Plans

Coast Guard Drawing 400 WAGB 103-3, Rev T, Booklet Of General Plans

Coast Guard Drawing 400 WAGB 0103-32, Rev D, General Arrangement Modifications

Incidental to Aft Crane Replacements

Coast Guard Drawing 400 WAGB 103-9, Rev K, General Arrangement of 02 Level & Above

Coast Guard Drawing 400-WAGB-0103-001, Rev F, General Arrangement Double Bottom

Coast Guard Drawing 400-WAGB-0103-002, Rev H, Gen Arrg Tank Top

Coast Guard Drawing 400-WAGB-0103-010, Rev E, Inboard Profile

Coast Guard Drawing 400-WAGB-0103-016, Rev B, Arrangement - Main Deck Aft

Coast Guard Drawing 400-WAGB-0103-034, Rev -, General Arrangement 01 Level

Coast Guard Drawing 400-WAGB-0245-002, Rev E, CPP Hydraulic Schematic Open Loop

Coast Guard Drawing 400-WAGB-0556-150, Rev A, Stbd CPP Hydraulic Sys Piping

Arrangement & Hose List

Coast Guard Drawing 400-WAGB-0556-151, Rev -, Stbd CPP Hyd Flushing Diagram

Coast Guard Drawing 400-WAGB-0801-009, Rev C, Tank Sounding Tables

Coast Guard Drawing 400-WAGB-0835-019, Rev B, Vents, Sounds & Overflows Flow Calcs

Coast Guard Drawing 400 WAGB 0700-1, Rev M, Polar Star Docking Plan

Coast Guard Drawing 400 WAGB 1100-1, Rev K, Structural Details & Notes

Coast Guard Drawing 400 WAGB 1101-002, Rev R, Shell Plating Fwd

Coast Guard Drawing 400 WAGB 1101-003, Rev R, Shell Plating Aft

Coast Guard Drawing 400-WAGB-1103-001, Rev K, Fore Peak Framing Fwd of CF-22 & CL

Bhd

Coast Guard Drawing 400-WAGB-1103-002, Rev G, Floors Frs 25 to 56

Coast Guard Drawing 400-WAGB-1103-005, Rev R, Floors Frs 198 to 222

Coast Guard Drawing 400-WAGB-1103-010, Rev H, ICE Frames Bet C F 45 & Fr 57

Coast Guard Drawing 400-WAGB-1103-014, Rev O, ICE Frames 198 to 242 & Floor Fr 224 to

Coast Guard Drawing 400 WAGB 1105-059, Rev C, Miranda Davit Relocation Installation

General Arrangement and Structural

Coast Guard Drawing 400-WAGB 1105-011, Rev D, Chain Locker Bhds

Coast Guard Drawing 400 WAGB 1105-024, Rev J, Elevator Trk Bhd Fr 53-57 & FR 105-110

Coast Guard Drawing 400-WAGB 1105-036, Rev B, Structural Mods Main Deck

Coast Guard Drawing 400 WAGB 1105-41, Rev D, Flight Dk Modification

Coast Guard Drawing 400-WAGB 1105-048, Rev -, Structural Mods

Coast Guard Drawing 400-WAGB 1105-32, Rev J, Expanded Metal Bulkhead

Coast Guard Drawing 400 WAGB 1107-2, Rev B, Rudder Trunk

Coast Guard Drawing 400 WAGB 1108-1, Rev G, Ice Shoe

Coast Guard Drawing 400-WAGB-1109-001, Rev K, Pillars & Girder Below Mn Dk Fwd Fr 143

Coast Guard Drawing 400-WAGB 1112-1, Rev X, Fdn for Center LINE Prop Machy

Coast Guard Drawing 400 WAGB 1112-4, Rev G, FDN FOR PRPLN & SS DSL GEN IN DSL

GEN ROOMS 1 & 2

Coast Guard Drawing 400-WAGB-1112-024, Rev G, Fdns for Anchor Handling Gear

Coast Guard Drawing 400-WAGB-1201-002, Rev C, Hawse Pipe Dk & Shell Bolster

Coast Guard Drawing 400-WAGB-1201-003, Rev G, Chain Pipe, Bellmouth, Deck Bolster &

Cover

Coast Guard Drawing 400 WAGB 1202-3, Rev K, Helicopter Safety Net

Coast Guard Drawing 400 WAGB 1202-5, Rev -, New Safety Nets for Aft Edge of Flight Deck

Coast Guard Drawing 400 WAGB 1205-4, Rev D, Lifting Pads for Rudder & Propellers

Arrangement & Details

Coast Guard Drawing 400 WAGB 1205-6, Rev -, Dets of Padeyes for Lifting Gear

Coast Guard Drawing 400 WAGB 1601-001, Rev C, Elevators at Fr 55 and Fr 108 Installation

Details

Coast Guard Drawing 400 WAGB 185-110, Rev -, Centerline CPP Hyd Sys Reservoir Tank

Fabrication

Coast Guard Drawing 400 WAGB 185-120, Rev -, Port CPP Hydraulic Reservoir Tank

Fabrication Details

Coast Guard Drawing 400 WAGB 185-152, Rev-, Stbd CPP Hyd Sys Reservoir Tank Fabrication

Coast Guard Drawing 400 WAGB 1906-1, Rev K, Zinc Protectors A/D

Coast Guard Drawing 400 WAGB 2200-10, Rev -, Rudder Stock Upper & Lower Bearings

Coast Guard Drawing 400 WAGB 2200-2, Rev D; Rudder Arrg’t & Det

Coast Guard Drawing 400 WAGB 2200-4, Rev M, Rudder Stock – Arrangement & Details

Coast Guard Drawing 400 WAGB 2200-8, Rev H, Rudder Stock Removal A/D

Coast Guard Drawing 400 WAGB 2200-9, Rev K, Arrgt of Steering Gear Rm

Coast Guard Drawing 400 WAGB 2601-1, Rev R, Anchor Handling Arrangement & Details

Coast Guard Drawing 400 WAGB 3601-006, Rev. C, Sewage Holding Tank Deck Gear

Storeroom Aft Bhd CF-21

Coast Guard Drawing 400 WAGB 3601-007, Rev. B, Sewage Holding Tank Lower Cargo Hold –

Aft Bhd 197

Coast Guard Drawing 400 WAGB 3901-1, Rev Z, Insulation A&D

Coast Guard Drawing 400 WAGB 4000-2, Rev F, Machinery and Piping Standard Details

Coast Guard Drawing 400 WAGB 4000-3, Rev V, Machinery Arrgt Plan View Lower Level &

List Of Mach'y

Coast Guard Drawing 400-WAGB 4000-4, Rev R, Machinery Arrgt Plan View Platform Level

Coast Guard Drawing 400 WAGB 4000-7, Rev K, Machinery Arrgt Elevation Stbd - Looking

Inbd

Coast Guard Drawing 400 WAGB 4105-1, Rev Z, Machinery Arrangement Main Propulsion

Polar Class Icebreaker.

Coast Guard Drawing 400 WAGB 4105-2, Rev Z, Assembly Drive end of Engine FI 16V 9X10-

1/2

Coast Guard Drawing 400-WAGB 4105-3, Rev Z, Assembly Drive End of Engine FI 16V 9X10-

1/2

Coast Guard Drawing 400 WAGB 4107-8, Rev D, Diagram Gas Turbine Intake & Exh. and

Boiler Exh. Sys

Coast Guard Drawing 400 WAGB 4112-3, Rev L, Propulsion Motor & Generator Interconnection

& IWD

Coast Guard Drawing 400 WAGB 4301-1, Rev AA, Arrgt of Shafting

Coast Guard Drawing 400 WAGB 4301-1, Rev Y, Arrgt. of Shafting

Coast Guard Drawing 400 WAGB 4301-11, Rev 4, Propeller Tailshaft Assy

Coast Guard Drawing 400 WAGB 4301-12, Rev 6, Oil Transfer Shaft Assembly

Coast Guard Drawing 400 WAGB 4301-13, Rev 3, Outer Oil Pipe Assy (Center Shaft)

Coast Guard Drawing 400 WAGB 4301-14, Rev 3, Outer Oil Pipe Assy (Wing Shaft)

Coast Guard Drawing 400 WAGB 4301-17, Rev 1, Inner Oil Pipe Assy (Wing Shaft)

Coast Guard Drawing 400 WAGB 4301-2, Rev F, Bulkhead Seal Arrgt & Details

Coast Guard Drawing 400 WAGB 4301-23, Rev D, Static Shaft Alignment Analysis

Coast Guard Drawing 400 WAGB 4301-29, Rev -, Dowel, Propeller Hub To Tailshaft

Coast Guard Drawing 400 WAGB 4301-3, Rev J, Shaft Tubes - Arr & Dets C/L & P/S

Coast Guard Drawing 400 WAGB 4301-4, Rev 12, Center Tailshaft

Coast Guard Drawing 400 WAGB 4301-5, Rev 10, Wing Tailshaft

Coast Guard Drawing 400 WAGB 4301-5, Rev 11, Wing Tailshaft

Coast Guard Drawing 400 WAGB 4302-1, Rev S, Stern Tube Bearg & Shaft Seal Arrg

Coast Guard Drawing 400 WAGB 4302-4, Rev B, Stern Tube Bearing and Shaft Seals (With

Modified Aft Bearing) Arrgt and Details

Coast Guard Drawing 400 WAGB 4400-18, Rev -, Connecting Procedure for Operating Rod and

Oil Tube

Coast Guard Drawing 400 WAGB 4400-27, Rev -, CPP Right Hand Hub Assembly (Elev Section

– Side Profile)

Coast Guard Drawing 400 WAGB 4400-31, Rev -, CPP Right Hand Operating Rod

Coast Guard Drawing 400 WAGB 4400-34, Rev -, CPP 69” Diameter Left Hand Propeller Hub

Assembly (Elev Section)

Coast Guard Drawing 400 WAGB 4400-38, Rev -, CPP Left Hand Operating Rod

Coast Guard Drawing 400 WAGB 4400-41, Rev -, CPP Hub Cylinder (Common to LH & RH)

Coast Guard Drawing 400 WAGB 4400-46, Rev -, CPP Propeller Tailshaft Assembly (Common to LH & RH)

Coast Guard Drawing 400 WAGB 4400-69, Rev -, Outer Oil Pipe Detail (Center Shaft)

Coast Guard Drawing 400 WAGB 4800-10, Rev U, Arr Hyd Interconnecting Piping Fwd Fr 150

Coast Guard Drawing 400 WAGB 4801-009, Rev U, Diagram of Bilge System

Coast Guard Drawing 400 WAGB 4803-1, Rev AA, Arr. Firemain 3rd. Dk. & Below

Coast Guard Drawing 400-WAGB-4803-9, Rev V, Diagram of Firemain, Flushing and Sprinkling

System

Coast Guard Drawing 400 WAGB 4803-12, Rev G, Arrgt of CO2 Fixed Flood Sys

Coast Guard Drawing 400 WAGB 4803-13, Rev C, Diag of CO2 Sys

Coast Guard Drawing 400 WAGB 4803-19, Rev -, Piping System Mod Range Guard Fire Ext

Sys Instl Arrgt Dets

Coast Guard Drawing 400 WAGB 4804-7, Rev M, Diag of H&C Potable Wtr Sys

Coast Guard Drawing 400 WAGB 4805-2, Rev V, Diagram S.W. Cooling System

Coast Guard Drawing 400 WAGB 4808-089, Rev. A, SLEP Sewage Transfer System Diagram

Coast Guard Drawing 400 WAGB 4808-17, Rev C, Operat Diag for Plumb & Interior Dk

Coast Guard Drawing 400 WAGB 4808-8, Rev N, Diag of Plumb & Inter Dk Drns

Coast Guard Drawing 400-WAGB-4808-20, Rev AE, Arr. Weather Deck Drains 01 Level &

Above

Coast Guard Drawing 400-WAGB-4808-22, Rev G, Diagram of Weather Deck Drains

Coast Guard Drawing 400-WAGB-4808-29, Rev -, Weather Deck Drain Modifications

Coast Guard Drawing 400 WAGB 4823-1, Rev D, Seachest & Strainer Compts Fwd 113

Coast Guard Drawing 400 WAGB 4823-2, Rev H, Seachest & Strainer Compt Aft Fr 113

Coast Guard Drawing 400 WAGB 5101-1, Rev G, A/D Boiler Smoke Pipes & Smoke Indicators

Coast Guard Drawing 400 WAGB 5101-2, Rev F, Safety Valve Easing Gear

Coast Guard Drawing 400 WAGB 5101-3, Rev AC, Arr Stm Boiler Blow, Escape, and Feed

Piping

Coast Guard Drawing 400 WAGB 5101-4, Rev J, A/D of Condensate Drn Tnk

Coast Guard Drawing 400 WAGB 5101-5, Rev F, Dia Steam Boil Blow, Escape and Feed Piping

Coast Guard Drawing 400 WAGB 5101-6, Rev N, Arrangement & Details Boiler Feedwater

Tank

Coast Guard Drawing 400 WAGB 5101-7, Rev 1, SDW 350M Marine Auxiliary Boiler Bare

Boiler Design Arrangement

Coast Guard Drawing 400 WAGB 5200-10, Rev G, Arrangement of Emergency Generator

Exhaust

Coast Guard Drawing 400 WAGB 5200-2, Rev H, Turbine Stack Arrgt & Det

Coast Guard Drawing 400 WAGB 5200-4, Rev P, Arrgt & Dets of Hangers for Gas Turb

Coast Guard Drawing 400 WAGB 5200-6, Rev D, Diagram of Diesel Generators Exhaust Piping

Coast Guard Drawing 400 WAGB 5200-7, Rev N, Arrangement of Diesel Exhaust Piping

Coast Guard Drawing 400 WAGB 6202-40, Rev N, Central Hydraulic System E & IWD

Coast Guard Drawing 400 WAGB 6504-5, Rev G, CO2 Release Alarm Sys Ckt FR E &

IWDCoast

Coast Guard Drawing 400 WAGB 1106-004, Rev V, 3rd Deck Plating Aft FR 117 1/2

Coast Guard Drawing 400 WAGB 1106-005, Rev K, 2nd Dk Pltg Fwd Fr 143 1/2

Coast Guard Drawing 400 WAGB 1106-007, Rev J, Main Deck Plating Fwd Fr 143-1/2

Coast Guard Drawing 400 WAGB 1106-008, Rev J, Main Deck Plating Aft Fr 143 1/2

Coast Guard Drawing 400 WAGB 1106-010, Rev M, 01 Level Plating Fwd Fr 143 1/2

Coast Guard Drawing 400 WAGB 1106-011, Rev M, 01 Level Plat Aft Fr 143 1/2

Coast Guard Drawing 400 WAGB 1106-012, Rev K, 02 Level Plating

Coast Guard Drawing 400 WAGB 1106-013, Rev H, 03 Level Pltg & Top of Hangar

Coast Guard Drawing 400 WAGB 1106-014, Rev G, 04 Level Top of Pilot House & Pilot House

Deck Level

Coast Guard Drawing 400-WAGB 1400-1, Rev R, Schedule of Dk Coverings

Coast Guard Drawing 400-WAGB 1602-11, Rev -, 36 X 36 & 30 X 36 W.T. Hatch

Coast Guard Drawing 400-WAGB-1602-006, Rev AF, Schedule of Steel Closures

Coast Guard Drawing 400-WAGB 5501-8, Rev J, Diagram of Dies Oil Transfer & Purification

System

Coast Guard Drawing 400-WAGB 1901-1, Rev AC, Painting Schedule

Coast Guard Drawing 400-WAGB 2901-3, Rev E, Tank Capacity Tables – POLAR STAR

Coast Guard Drawing 400-WAGB 3802-1, Rev M, Arrg of Steam Heat 02 Lvl & Abv

Coast Guard Drawing 400 WAGB 3802-2, Rev AB, Arr. Steam Heat 01 Lvl. & Bel. Fwd 113

Coast Guard Drawing 400-WAGB 3802-3, Rev AF, Arrg Steam Heat 01 Lvl & Blw Aft 113

Coast Guard Drawing 400-WAGB 3802-4, Rev J, Dia. Steam Heating and Condensate System

Coast Guard Drawing 400-WAGB 3802-7, Rev A, Diag Stm Heat & Condensate System

(POLAR STAR)

Coast Guard Drawing 400-WAGB 3803-1, Rev M, Vent & A/C Diag

Coast Guard Drawing 400-WAGB 3803-2, Rev L, Vent & A/C Equipment List

Coast Guard Drawing 400-WAGB 3803-4, Rev N, Vent & A/C Fan Rm Arrg 02 & 03 Lvl

Coast Guard Drawing 400-WAGB 3803-5, Rev M, Vent & A/C Fan Rm Arrg Mn Dk FR 113

Fwd

Coast Guard Drawing 400-WAGB 3803-6, Rev M, Vent & A/C Fan Rm Arrg Mn & 2nd Dk FR

113 Aft

Coast Guard Drawing 400 WAGB 3803-9, Rev S, Vent & A/C Arrg 01 Lvl Fr 67 Fwd

Coast Guard Drawing 400 WAGB 3803-14, Rev H, Vent & A/C Arrg Mn Dk Fr 25-57 (S)

Coast Guard Drawing 400 WAGB 3803-15, Rev G, Vent & A/C Arrg Mn Dk Fr 57-85 (P)

Coast Guard Drawing 400 WAGB 3803-16, Rev G, Vent & A/C Arrg Mn Dk Fr 57-85 (S)

Coast Guard Drawing 400 WAGB 3803-35, Rev C, Vent & A/C Heating & Cooling Load

Calculations

Coast Guard Drawing 400-WAGB 4200-1, Rev G, A/D Lifting Gear Motor & Gear Rms

Coast Guard Drawing FL 6713-203, Rev D, CRP-V850 Transducer (SS505) Adapter Assembly

Coast Guard Drawing FL-1204-3, Rev A, Fleet Welded Padeyes and Links

Coast Guard Fleet Drawing FL 2804-12, Rev -, U.S.C.G. Emblem

Coast Guard Fleet Drawing FL 2804-022, Rev A, Consolidated Visual ID for Cutters (Vessels 65 ft and Over in Length)

Coast Guard Drawing FL-184-002, Rev B, SS164 Shallow Water Transducer Adapter Assembly

Coast Guard Drawing FL-6713-203, Rev. D, CRP-V850 SST XDCR, (SS505) Adapter Assembly

NAVSEA Drawing 803-5184182, Rev B, Insulation, Passive Fire Protection- Installation Details

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation for Compartments

Installation Details

NAVSEA Drawing 803-921865, Rev R, Cathodic Protection Hull Zinc Anodes

Coast Guard Drawing 400 WAGB 5801-2, Rev F, Diagram Distilling Plant

Coast Guard Drawing 400-WAGB-3902-1, Rev B, Machinery Insulation Schedule

Coast Guard Drawing 400-WAGB 3902-2, Rev E, Piping Insulation Schedule

Coast Guard Drawing 400-WAGB-424-001, Rev. A, Doppler Speed Log Installation

Coast Guard Drawing 400-WAGB-423-011, Rev 7.0, 1SG38-SINS2(V)49/AIS(V)2 Installation

BWD and Details

SINS-2(V)49 Block Diagram CGC POLAR STAR (WAGB-399

Coast Guard Drawing 400-WAGB 4800-17, Rev F, Steer Gear Interconn Hyd Piping

Coast Guard Drawing 400 WAGB 4112-8, Rev S, Arrangement Compressed Air Diesel Engine

Starting

Coast Guard Drawing 400 WAGB 4112-9, Rev G, Diagram of Engine Starting, Clutch, & G.T.

Fuel Atomizing Air

Coast Guard Drawing 400 WAGB 4112-220, Rev A, Rip Arrangement Starting Air System

Modifications – POLAR STAR

Coast Guard Drawing 400 WAGB 4112-221, Rev A, Rip Diagram Starting Air System

Modifications – POLAR STAR

Coast Guard Drawing 400 WAGB 4901-8, Rev R, Diagram of Compressed Air System

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3,Jan 2014, Coatings and Colors

Manual

Coast Guard Technical Publication (TP) 1991, 2019, Engineers Operating Manual Coast Guard

Technical Publication (TP) 1992, Engineers Operating Manual

Coast Guard Technical Publication (TP) 1994A, 29-JAN-19, Ship Information Book - Piping, Ventilation, Heating and Air Conditioning System

Coast Guard Technical Publication (TP) 1994B, 31-JAN-19, Ship Information Book - Piping, Ventilation, Heating and Air Conditioning System

Coast Guard Technical Publication (TP) 2029, Manufacturer's Instruction Book - SWBS

Group(s) 242-262

Coast Guard Technical Publication (TP) 2029, Manufacturer's Instruction Book - SWBS

Group(s) 243-262

Coast Guard Technical Publication (TP) 2029, Prop Shaft

Coast Guard Technical Publication (TP) 2031, SWBS 500, Section A, 1971, Group Control

Center

Coast Guard Technical Publication (TP) 2031, SWBS 500, Section B, 1974, Group Control

Center, Parts/Material List

Coast Guard Technical Publication (TP) 2032, 23-JAN-15, Manufacturer's Instruction Book –

SWBS Group(s) 500

Coast Guard Technical Publication (TP) 2033, 26-MAR-19, Manufacturer's Instruction Book-

SWBS Group(s) 503-510

Coast Guard Technical Publication (TP) 2033, Manufacturer's Instruction Book-SWBS Group(s)

503-510

Coast Guard Technical Publication (TP) 2034A, SWBS 512, Jan 2020, Ventilation Fans, Buffalo

Forge

Coast Guard Technical Publication (TP) 2035, SWBS 517, Section A, Rev -, Auxiliary Boiler

Coast Guard Technical Publication (TP) 2036, SWBS 531, Section A, Rev -, Distilling Plant

Coast Guard Technical Publication (TP) 344_261_A, 02/18/2000, FOP Model USPX 413 –

Operation, Maintenance & Repair Manual

Coast Guard Technical Publication (TP) 344_261_B, 02/18/2000, FOP Model USPX 413 – FOP

– Technical Manual for Ancillary Equipment

Coast Guard Technical Publication (TP) 2037, SWBS 555, Section C, Fire Extinguishing System

CO2

Coast Guard Technical Publication (TP) 2039, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 2042, Manufacturer's Instruction Book - SWBS Group

Coast Guard Technical Publication (TP) 2761, 1984, Nomex Joiner Bulkheads Repair Manual

Coast Guard Technical Publication (TP) 3205, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 3255, Gas Turbine

Coast Guard Technical Publication (TP) 3442, FOP Model USPX 413 – Operation, Maintenance

& Repair Manual

Coast Guard Technical Publication (TP) 3442-261-A, FOP Model USPX 413 – Operation, Maintenance & Repair Manual

Coast Guard Technical Publication (TP) 3442-261-B, FOP Model USPX 413 – Operation, Maintenance & Repair Manual

Coast Guard Technical Publication (TP) 3443A, 03/17/2017, Lube Oil Purifier (LOP) Model

WHPX 405

Coast Guard Technical Publication (TP) 3443A, 2017, Lube Oil Purifier (LOP) Model WHPX

Coast Guard Technical Publication (TP) 4390A, Coupling, Flexible Diaphragm

Coast Guard Technical Publication (TP) 4391, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4391, Manufacturer's Instruction Book-SWBS Group(s)

235-241

Coast Guard Technical Publication (TP) 4391, Propulsion A.C. Generator

Coast Guard Technical Publication (TP) 4391, Propulsion Generator and Main Motor

Coast Guard Technical Publication (TP) 4391, Reduction Gear

Coast Guard Technical Publication (TP) 4391, SWBS 235, Section A, Propulsion A.C. Generator

Coast Guard Technical Publication (TP) 4395, 2019, SWBS 243 Propulsion Shafting and CPP

System

Coast Guard Technical Publication (TP) 4395, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4397A, 2016, Ship Service Diesel Generator (SSDG) –

Generator

Coast Guard Technical Publication (TP) 4397A, Ship Service Diesel Generator (SSDG) -

Generator

Coast Guard Technical Publication (TP) 4411, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4415, Manufacturer's Instruction Book, 2012, SWBS

581 Section A Anchor Handling and Stowage Systems

Coast Guard Technical Publication (TP) 4415, SWBS 581, Section A, Anchor Windlass System

Coast Guard Technical Publication (TP) 4650, 2019, Main Propulsion Diesel Engine – Model

251 – 16 Cylinder, Ops & Maint. Manual.

Coast Guard Technical Publication (TP) 4668, 29-NOV-07, Miranda Davit - Model Mrt 3900

Coast Guard Technical Publication (TP) 4978, Telescoping Boom Crane, Model TB60-60

Coast Guard Technical Publication (TP) 4979, 20-JAN-2019, Knuckle Boom Model K280-70

Coast Guard Technical Publication (TP) 4986, Modified Controllable Pitch Propeller System

Coast Guard Technical Publication (TP) 4989, Manufacturer's Instruction Book - SWBS

Group(s) 241

Coast Guard Technical Publication (TP) 4989, Rev -, Main Reduction Gear Drives

Coast Guard Technical Publication (TP) 5502, Fire Suppression I am not sure who packages all of this information, but we will need to tell them to look for this document on the HEALY in

CG LIMS. IT is listed there, but not for polar star

System - Model WHDR

Coast Guard Technical Publication (TP) 9168, Pallet Truck - Model E16N-1266-120

Coast Guard Technical Publication (TP) 9168, Pallet Truck - MODEL E16N-1266-120

Coast Guard Technical Publication (TP) LR-H5-001-V0, 2023, Oily Water Separator Model 5015

Coast Guard Technical Publication (TP) S9073-A2-HBK-010, 2005, Resilient Mount Handbook

Fire Prevention and Response

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0000, 2022, General

Requirements

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0740, 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0850 (SFLC Std Spec 0850), 2022, General Requirements for Drawing Preparation

Surface Forces Logistics Center Standard Specification 0860 (SFLC Std Spec 0860), 2022, General Requirements for Technical Publication

Surface Forces Logistics Center Standard Specification 2350 (SFLC Std Spec 2350), 2022, Inspect, Test and Recondition DC Generators & Motors In-Place

Surface Forces Logistics Center Standard Specification 2351 (SFLC Std Spec 2351), 2022

Overhaul DC Generators & Motors, Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3020, 2022, Overhaul

AC Electrical Motors

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2022, Inspect, Test And Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 3101 (SFLC Std Spec 3101), 2022, Overhaul AC Synchronous Machines

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100, 2022, Clean

Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), 2022, Fire

Prevention and Response

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install

Interior Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8364), 2022, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2022, Temporary Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2022, Temporary Hull Accesses

Coast Guard Drawing FL-184-002, Rev B, SS164 Shallow Water Transducer Adapter Assembly

OTHER REFERENCES

Abrasive Blast Cleaning

Airmar SS164 Owner’s Guide and Installation Instructions

Airmar Drawing D-14044, Rev. I, SS164 Outline Drawing

Allis Chalmers Corporation (DWG) 9016-T-3; Dowel Pin

Allis Chalmers Corporation (DWG) 9024-F-1; Outer Oil Pipe Detail (Center Shaft)

Allis Chalmers Corporation (DWG) 9024-H-1, Outer Oil Pipe Detail (Wing Shaft)

Allis Chalmers Corporation (DWG) 9024-J-2, Outer Oil Pipe Assy (Center Shaft)

Allis-Chalmers Corporation (DWG) 9025-AG-3, Spacer Ring Rev.( 02)

Allis-Chalmers Corporation (DWG) 9025-AG-3, Spacer Ring, Rev 02

American National Standards Institute/American Water Works Association (ANSI/AWWA)

C652, 2011, Disinfection of Water-Storage Facilities

American National Standards Institute/American Water Works Association (ANSI/AWWA)

C652, 2019, Disinfection of Water-Storage Facilities

American National Standards Institute/NSF International (ANSI/NSF) 61, 2020, Drinking Water

System Components - Health Effects

American Society of Mechanical Engineers (ASME) B16.34, 2020, Valves-Flanged, Threaded, and Welding End

American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing

American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2020, 2020, ASNT Standard for Qualification and Certification of Nondestructive Testing

Personnel

American Society of Mechanical Engineers (ASME) B16.34, 2020, Valves-Flanged, Threaded, and Welding End

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of Welds

American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of

Welds

American Welding Society (AWS) D1.1/D1.1M, 2020, Structural Welding Code – Steel

American Welding Society (AWS) D3.5, 2000, Guide for Steel Hull Welding

Annex 21, Resolution MEPC .285(70), 2016, Amendments to the Revised Guidelines and

Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships.

ANSI/ASME B40.100-2013, 2013, Pressure Gauges and Gauge Attachments

ANSI/MSS SP-58-2009, 2009, Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation

ASTM Standard Specification A106, March 2021, Standard Specification for Seamless Carbon

Steel Pipe for High Temperature Service

ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2015, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, Series, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by

Tape Test

ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film

Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

ASTM International (ASTM) D5363, 2008, Standard Specification for Anaerobic Single-

Component Adhesives (An)

ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-

Component Adhesives (AN)

ASTM International (ASTM) F992, 2006, Standard Specification for Valve Label Plates

ASTM International D1330, 2004, Standard Specification for Rubber sheet Gaskets.

ASTM International (ASTM) F1508-96, 2016, Standard Specification for Angle Style, Pressure

Relief Valves for Steam, Gas, and Liquid Services

Chockfast Technical Bulletin 632A, Sterntube & Strut Bearings

CHOCKFAST Orange Installation Stern Tube Bearing USCG Polar Class Ice Breaker. 4/8/2005

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health

Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1910, 2017, Occupational Safety and Health

Standards

Code of Federal Regulations (CFR) Title 40, 2013, Protection of the Environment

Code of Federal Regulations (CFR) Title 46, Chapter I, Part 176, Subpart H, Section 810, 2019, Fire Protection

Code of Federal Regulations (CFR) Title 46, Part 61.05, 2013, Tests and Inspections of Boilers

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound, Antiseize, Zinc

Dust-Petrolatum

CID A-A-59313, 2019, Thread Compound, Antiseize, Zinc Dust-Petrolatum

Compressed Gas Association, Inc. (CGA) C-6-2007, Standards for Visual Inspection of Steel

Compressed Gas Cylinders

Eaton Hydraulics LLC, Filtration Division, Installation, Operation & Maintenance Manual Model

570 Duplex Basket Strainer, 06/2011

Eaton Hydraulics LLC, Filtration Division, Installation, Operation & Maintenance Manual Model

570 Duplex Basket Strainer, 06/2011

Federal Specification (Fed Spec) QQ-N-281, Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D Amendment 2, 2020, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) RR-C-271H w/ Attachment 1, Series, Chain and Attachments, Carbon and Alloy Steel

GAS TURBINE MODULE INTERFACE CONNECTIONS 400’ POLAR ICEBREAKER MPL-

1274-13.0 (DRAWING FROM TP 3255)

General Specifications for Overhaul of Surface Ships (GSO), 2004, Section 581 Anchor Stowage and Handling

Gooseneck Renewal.pdf

IEEE Std 56-2016, IEEE Guide for Insulation Maintenance of Electric Machines

IEEE Std 62.2-2005, Guide for Diagnostic Field Testing Electrical Machinery

IEEE Std 43-2013, IEEE Recommended Practice for Testing Insulation Resistance of Electric

Machinery

IEEE Std 2455-2023, IEEE Recommended Practice for the Repair and Maintenance of Direct

Current Electric Machines

International Organization for Standardization (ISO) 4406, 7/13/2004, Hydraulic Fluid Power --

Fluids -- Method for Coding the Level of Contamination by Solid Particles

International Organization for Standardization (ISO) 4406, 7/13/2004; Hydraulic Fluid Power --

Fluids -- Method for Coding the Level of Contamination by Solid Particles

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2019

Edition, Pressure Testing Of Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2017

Edition, Butterfly Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010

Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2019

Edition, Bronze Gate, Globe, Angle and Check Val

MIL PRF-16173 w/Interim Amendment 2, 2017, Corrosion Prevention Compound, Solvent Cut

Back, Cold Application

MIL-A-21016, May 1990, Adhesive, Resilient Deck Covering

MIL-A-22262B Amendment 2, 2021, Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-C-24633A, 2014, Chain, Stud Link, Anchor, Low Alloy Steel, Flash Butt Welded

MIL-C-24757, Nov 1990, Cloth, Fiberglass, Coated

Military Specification MIL-C-20079, July 1987, Cloth, Glass; Tape, Textile Glass; And Thread, Glass and Wire-Reinforced Glass

MIL-D-18873, Jul 1982, Deck Covering Magnesia Aggregate Mixture

MIL-D-21631, Dec 1990, Deck Covering, Latex Concrete

MIL-D-23134, Jul 1999, Deck Underlay and Covering, Insulating, Magnesia Aggregate Mixture

MIL-DTL-23549D, 2021, Grease, General Purpose

CID A-A-59313, 2019, Thread Compound, Antiseize, Zinc Dust-Petrolatum

MIL-A-18001, 2015, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418)

Military Detail Specification MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy

(Commercially Accepted - ASTM B418)

Military Detail Specification MIL-A-22262, Mar 1996, Abrasive Blasting Media Ship Hull Blast

Cleaning

Military Detail Specification MIL-D-16791, Rev G, Detergents, General Purpose (Liquid, NonIonic)

Military Detail Specification MIL-I-24092, Rev A, Insulating Resin, Solventless, Baking, Semi-

Rigid, for Dip Processing, Grade SH, Class 155 to 200 Thermal Class

Military Detail Specification MIL-I24092/1, Sep 1993, Insulating Varnish, Solvent Containing

Air-Dry for Spot Patching and Emergency Repairs. Grade CA, Class 130 and 155 Thermal

Class Requirements

Military Detail Specification MIL-R-21252B, May 1991, Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing

Military Performance Specification MIL-PRF-1149, Jun 1998, Gasket Materials, Synthetic

Rubber, 50 and 65 Durometer

Military Performance Specification MIL-S-45180, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

MIL-PRF-24176C, 2020, Cement, Epoxy, Metal Repair and Hull Smoothing

MIL-PRF-24613, Dec 1990, Deck Covering Materials, Interior, Cosmetic Polymeric

MIL-PRF-3135, Nov 1986, Deck Covering Underlay Materials

MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness

MIL-PRF-900, Mar 1991, Rubber Gasket Material, 45 Durometer Hardness

MIL-S-45180D, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

MIL-STD-1689, Nov 1990, Fabrication, Welding and Inspection of Ships Structure

MIL-STD-1689A, 1990, Fabrication, Welding, and Inspection of Ships Structure

MIL-STD-419, 1987, Cleaning and Protecting Piping Tubing, and Fittings for Hydraulic Power

Transmission Equipment

MIL-STD-777, 2012, Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships.

MIL-STD-2199B(SH), Jul 2010, Coverings for Waterborne Main Propulsion Shafting on U.S.

Naval Surface Ships and Submarines.

MIL-STD-3026A, 2017, Chemical Cleaning of Sewage Collection Piping Systems on Navy

Surface Ships

Military Specification MIL-T-16420K, April 1978, Tube, Copper-Nickel Alloy, Seamless and

Welded

Military Specification MIL-T-24108B, October 1987, Tube, Copper (Seamless)

National Board of Boiler and Pressure Vessel Inspectors (NBBI), NBIC, 2023, National Board

Inspection Code

National Fire Protection Association (NFPA) 12, 2018, Standard on Carbon Dioxide

Extinguishing Systems

National Fire Protection Association (NFPA) 12A, 2018, Standard on Halon 1301 Fire

Extinguishing Systems

National Fire Protection Association (NFPA) 17A, 2017, Standard for Wet Chemical

Extinguishing Systems

Naval Sea Systems Command (NAVSEA) S9555-AT-MMA-010, Rev 4, Technical Manual for

HALON 1301 Fixed Fire Extinguishing System, Naval Sea Systems Command (NAVSEA) Technical Publication T9074-AS-GIB-010/271, Apr

1997, Requirements for Nondestructive Testing Methods

Naval Sea Systems Command (NAVSEA) Technical Publication,T9074-AS-GIB-010/271, Apr

1997, Requirements for Nondestructive Testing Methods

Naval Sea Systems Command (NAVSEA)Technical Publication T9074-AS-GIB-010/271, Apr

1997, Requirements for Nondestructive Testing Methods

Naval Sea Systems Command (NAVSEA)Technical Publication T9074-AS-GIB-010/271, Requirements for Non-Destructive Testing Methods

Naval Sea Systems Command (NAVSEA) Instruction S9AA0-AB-GOS-010 General

Specifications for Overhaul of Surface Ships (GSO)

Naval Sea Systems Command (NAVSEA) Type and Standard Drawing 804-8436625, Rev -, Safety Nets, Deck Edge, Aluminum Frame, Synthetic Net

Naval Ships Technical Manual (NSTM) Chapter 079, Practical Damage Control

Naval Ships Technical Manual (NSTM), Chapter 581, Anchoring

Naval Ships Technical Manual S9086-GY-STM-010, 2021, Chapter 221

Naval Ships’ Technical Manual (NSTM) Ch 244, 2011, Propulsion Bearings and Seals

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation For Compartments

Installation Details

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation For Compartments

Installation Details

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure

NAVSHIP Dwg 810-138579, Rev. F, Deck Drain Fittings

Preparation Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet

Preparation Standard SSPC-SP 11 2013, Power Tool Cleaning to Bare Metal

Rucker Control System Drawing 82002-J-044, Anchor Windlass Assy. Icebreaker Machinery

Rucker Control System Drawing 82002-J-738, Control Valve, Operator Arrangement

S9086-S4-STM-010/CH-556R4 Hydraulic Equipment Power Transmission and Control

SAE International (SAE) AMS-STD-595A, 2017, Colors Used in Government Procurement

SNT-TC-1A, 2016, Recommended Practice for Personnel Qualification and Certification in

Nondestructive Testing

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 1998, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Corkand Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2013, Cork and Rubber Composition Sheet, For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183B, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) J1273, 2014, Recommended Practices for Hydraulic

Hose Assemblies

Society of Automotive Engineers (SAE)/Aerospace Material Specification (AMS) C 6183, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society Of Naval Architects and Marine Engineers (SNAME) T&R 3-39, Guide for Shop and

Installation Tests

Society Of Naval Architects and Marine Engineers (SNAME) T&R 3-47, Guide for Sea Trials

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP

11), 2014, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP

11), 2020, Bare Metal Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP

11), Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.15 (SSPC-SP

15), 2004, Commercial Grade Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2018, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), Power Tool Cleaning)

The Society for Protective Coatings (SSPC), August 2016, Paint Application Specification No. 2

(PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC), Paint Application Specification No. 2 (PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet

Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP WJ-4/NACE WJ-4, 2017, Waterjet Cleaning of Metals –

Light Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 10/NACE No.2, 2007, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 12/NACE No.5, 2002, Surface Preparation and Cleaning of

Metals by Waterjetting Prior to Recoating

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet

Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 6 (WAB)/NACE WAB-3, 2015, Commercial Abrasive Blast

Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP WJ-2/NACE WJ-2, 2016, Waterjet Cleaning of Metals –

Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP

10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface

Preparation Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Jan 2007, Near-White Metal Blast

Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP WJ-4/NACE WJ-4, 2012, Waterjet Cleaning of Metals –

Light Cleaning

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 11, Nov 2013, Power Tool Cleaning to Bare Metal

Thordon Double Key XL Bearing Installation Manual 10 May 2006

Thordon XL Double Key Bearing Assembly DWG No. TG-17321 (Thordon Bearing Inc.)

Thordon XL Double Key Bearing Carrier DWG No. TG-17344 (Thordon Bearing Inc.)

USCG Polar Class Aft Sterntube Bearing Design Study, Final Report, September 16, 2005

USCG Polar Class Propulsion Shaft 2005 Alignment Plan Report, Oct 27, 2005

US Environmental Protection Agency Method 1664, Feb 1999, N-Hexane Extractable Material and Silica Gel Treated N-Hexane Extractable Material by Extraction and Gravimetry.

Westinghouse Drawing 639F283

Westinghouse Drawing 7142D39

Westinghouse Torque Table