Attachment 03 - Labeling.pdf

Labeling

Label telecommunications systems in accordance with TIA/EIA-606. All labeling must be a minimum of

¼-inch (6mm) high, handwritten labels must not be used for the final configuration.

Label the front of all patch panels and MIO/zone boxes with the appropriate classification form as follows: TS/SCI = SF712 or Secret/Collateral = SF707; if TS/SCI and Secret are housed in the same

MIO/zone box the box will be labeled as TS/SCI. Label the front of each MIO/zone box with a unique ID and patch panel with a unique ID within that cabinet. Label the front of each patch panel with the applicable classification. Annotate on the patch panel’s port labeling placard the distant MIO/zone box

ID number and associated ports for each applicable module installed. Label the front of each MIO/zone box with the following information as applicable: distant room number; cabinet ID and patch panel ID;

port number; and classification.

Label all outlet faceplates with their classification and each individual outlet/connector will be labeled with the horizontal link identifier. The labeling shall appear on the faceplate in a way that clearly identifies the individual connector associated with the particular identifier. Label all backbone trunk cables at each end with the following information as applicable distant end room number; cabinet ID, patch panel/module or MIO/zone box ID and module slot location. Any exposed cabling that is not color-coded for a classification will be also marked with appropriate color tape to identify its classification IAW

CNSSAM TEMPEST/1-13 para 3.2 & 3.5.